What a gorgeous case! Whereas I had been using EVGA's CLCX AIO to display some of that information, I really like that the most critical information can be made available on the front LCD panel. Been waiting for something like this for a while.

That bend on the GPU gives me headache 🤕

The latching pieces breaking is a pretty major concern, even with the extra ones they give you. If you clean out your PC every 3-6 months you can expect to run out in like 2 years.

I just discovered you could fit a 120mm x 15mm fan behind the removable front panel (set to intake), and routing the fan cable up behind the front panel monitor, but it has to be a flat fan cable though, because anything round or sleeved will not fit the gap behind the monitor and the case. I did this because I used a Thermaltake PSU that was way longer than it needed to be (it was the only one I had on hand), and I couldn't use a 120mm fan on the inside of the front of the case.

Very informative, thank you. I plan on building in one of these! :)

Nice review m8, well done

Excellent review thanks❤

Pretty cool, we need the lower power parts to come out. I am definitely down sizing my tower.

Excellent Review!! - Helped me to make a decision! - Not a gamer, a futures trader.

This case is worth the money if you want the 280/360mm aio support or the screen, just got mine a few days ago and its very nice...

If you buy the non screen version or if your screen stop working after 2 years are there any seperate Jonsbo screens to replace it?

What will be the new trends for PC cases in 2023, after all the RGB and tempered glass? Front/side LCD screens and wood/leather?

Definitely one of the more unique cases. Lots of the people in r/mffpc used this case and enjoy it very much. Too bad for the slightly not so great build quality, but that's why it cost less for the mesh version. Still a good case with a good screen for a decent screen. Can't ask for more.

Great case. I'm thinking to get one.

I am seriously thinking about grabbing one of these in white next time they're in stock.

It's a very cool design, and I love the layout except for one tiny thing. They really should've modified the core frame to better fit the cables for the screen. ideally the cables for the screen would be run straight through a hole on the back panel, behind the motherboard tray so you don't have to give up a PCIe slot to route the display cable without cutting said hole yourself. BUT, otherwise it's a great case for showing off a workstation inside of.

Thank you for this review. I haven't heard of this company before. Are they generally good?

I didn't know such a case existed ... I am trying to replace an ageing laptop, but the issue I have is my home office setup - I have a work-supplied laptop, which is locked down tighter than an astronauts space suit, so I can't stream music on it whilst I work. So I also have a personal laptop on which to stream music. I then have dual screens and a KVM switch that can only switch one monitor. So I have one monitor permanently connected (extended) to my work laptop, whilst the other monitor can be switched between the work laptop and personal laptop. The benefit of this is that I can use the 2 monitors for work (I use my work laptop screen for general Teams chats and email), and I can use my personal laptop to control Spotify as I stream music. The issue I have with replacing my personal laptop is that I lose a screen. So when I'm working on my dual monitors any desktop replacement is effectively "blind" ... unless I can use the screen on this case to be able to control Spotify! :) Now that is making me want one of these! Oh and in case anyone asks why I have a KVM switch and don't use it to switch to desktop to control Spotify and then switch back to work laptop ... for some reason when I switch and drop a screen on my work laptop all the apps randomly disperse around the 2 remaining screens and rarely do they return to the screen they were on when I switch back ... if you know how to fix that please let me know ;)

I honestly think it's AWESOME! Simple to just build and setup with their included simple Aida64 display.... it's essentially about as plug-n-play as you can get as far a a case display goes... And so in that respect it's totally worth the $150 Yes you can do it cheaper, but like you said in the video you just won't find a screen that big, with such a high resolution, or refresh rate, for the same price point..... PLUS You don't have to do ANY hacking up of case parts to get it look so clean... And it is customizable to your own tastes WITHOUT bloatware (which I ABSOLUTELY was expecting.... and you KNOW if this catches on there WILL be 50 different companies all making their own proprietary software AND the hardware won't be able to be taken off the case and used in another build when it's time to upgrade (I'm looking at you DELL and HP!!!) So ALL-IN-ALL this is a GREAT PRODUCT and a fairly GOOD price! I would LOVE to buy it (I'm actually looking to get a new case) BUT it doesn't have enough space for all my HDDs :( ... Well that and I would end up turning the case display OFF because it would be way too distracting when I'm watching videos as my computer is my TV replacement and my case is on the same eye level as my screen.... And it's not really big enough to do anything on it as I watch my videos from several feet away.... HOWEVER If I did have a computer desk and I had my case up on it like my monitor, then while gaming I could have a walk-through on the case display to help me out when I need to read up on a difficult part, or even have a discord chat open if I was a streamer... So there are A LOT of REALLY GOOD use cases for this case, and I could LOVE to have it, but I'm just not one of those uses cases right now. (But I still want it anyway lol)

Given the limitations of Micro ATX, is it possible to actually use both PCI slots in a case like this?

Have an unopened one at home, need a few parts to start the build. Recently did a 12th gen w/DDR5 and a 13th gen w/DDR4, this will be 13th/DDR5 and a FE 4070 Super so very excited.

Side note as a owner and still currently still using the mesh version, love the case, the front panel you could add a black sheet of paper in-between so that the rgb fan light won't bleed out of it(looks ugly). Also the PSU you can literally use any PSU but note that the size 140 would be the best, I'm using a 160 PSU and I can't put a fan at the front(that why there's the black sheet of acrylic) For those who think there's no space they also buy the atx version Jonsbo D41 mesh

Maybe replace the latch pins with magnets? I like the case with the display. I’d go with a white themed case/build with HAL 9000 on the display.

Imagine putting a screen on the right side with an all mesh left panel. You could put close to a 15 inch display. Recess the mobo tray a bit to allow cable management and to recess the screen about 2-3 inches so you can place a screen protecting panel that can be pulled away. Then run a Sata cable for power. Have a vertical mount for the GPU to optimize cooling and most graphics cards are thinner they are wide. An AIO could still go in the front, you build something like the TU 150 with a handle. Make it a full itx build so it becomes the ultimate portable case. OLED, at 120htz.

Thanks for telling about latches. I was drooling for D41 Mesh replacing modded Q500L but I'll pass.

question, can you have 3 bottom 120s and the front? will it fit? if so, how much room? could you fit 30mm lower and front 120s?

i got the d41 and i love it its slightly larger than the d31

It can easily accommodate a Strix 4090. Supports up to 400mm length GPU's. You just need ONE of the following: SFX power Supply, a 240mm AIO instead of 360mm or an Air Cooler to mitigate that GPU clearance issue with the PSU.

Will the MSI MAG B650M Mortar WiFi fit this case?

Do you have info as to where I can get that exact Sensor panel template? Thanks....

Can this really fit a 200mm PSU? Planning my next build with this case. Would be a nice break if I can fit my 200mm EVGA PSU.

AS i see you could use some tight wraps to pull the psu cables somewhere above and you could fit a 4090 there, the real problem here is the weight of that gpu on the pci port without any space to put a support for it, wich could bend the pci port.

This is underrated, best matx imo

question : is the tempered glass sidepanel on the jonsbo d31 directly swappable to the asus ap201? no matter how many times i look at it they look like they were made by the same manufacturer with just tiny differences on each other. even the mounting points looks exactly at the same spot.

I believe the front panel headphone jack can also connect a microphone.

the screens currently on sale as accessories for like 40 bucks , im getting a couple of em for a project

Back in the mid to late 2000s you could buy screens that would take up two or three 5.25" bays.

Thanks for addressing the build quality issues on this. Others have mentioned this as a problem, too. No way I would downgrade from my current Fractal build quality, in place of a lesser quality case. I'll keep looking.

I will like to see the jonsbo n2 as a Nas and see if it worth the price

Are you able to use a sfx to atx bracket to use an sfx psu?

Where do you get the screen template at 7:17?

This is perfect imho Jonsbo D41 is even sweeter I hope more competitors hv front panel screen like this Loved the idea of taking this round town and not bringing any monitor

I'll take a screen please. Should start making them for all size towers as an added option at least but most of all, make it raspberry friendly as I use my stats using the web with Aida64

I want something like this on a larger case so that I can build my NAS in it. Then I always have a display when I need to troubleshoot it instead of moving one around

I was considering getting one of these but no one in the US has them available anymore. Newegg doesn't even list it at this point. They have the standard and mesh but not the one with the screen. The screen was the entire reason it was even on my radar.

you can't say it sells for like $70 on aliexpress when shipping is almost $200

Hi! Where to download SensorPanel like in your video?

Anyone know if this will be available in Canada?

Great video, but please dont kill your gpu , don't let it sag

Wonder if this good for international plane travel

Cn anyone recommend an 850Watt psu? mine didnt have long enough cables to reach the cpu plug

Ótima dica

72 C over ambient for the CPU... What's you ambient temp and which test did you perform?

Where can i buy that ada64 template

Just a thought, what would stop you from powering the screen with a USB header on the motherboard?

I like it and its likely to be replicated by other manufacturers in the future. Godlike MB has a screen so why not a case. I'm thinking mini ITX and 2 x 360 rads....

Can we put a second AIDA64 screen inside, on the right side behind the glass?

Very nice

I have a sudden and irrational desire for a case with analogue gauges.

How come front display shows non-existent GPU "7650XT"?

I am trying to find out what kind of panel the 8" screen is. Is it a TN,VA or IPS. Hopefully not an OLED if you want to use it for dials with statistics.-.

History repeating itself? Not the first time... Remember Windows SideShow, part of Windows Vista? I also remember a few HTPCs with displays.

Good video! Only wish you would use inches and not mm. Merica!!

d31 mesh without the screen or ap201 plz help me decide also if someone knows about availability of d31 in europe ....

you cannot fit a 280 rad on top and a 12mm fan in the front, they are both off by around 1mm~2mm. Top 280 rad can barely be squeezed in with a slim profile fan, provided the VRM heatsink is VERY low as it touches the VRM space and also will require custom sleeved 8 pin connector. Front 12mm fan CANNOT be fitted, screw holes off by 1mm.

Great review, thank you. I wanted to ask about my potential build for this case if anyone who has used it thinks it will be ok? D31 Mesh SC White ASUS Tuf Gaming B650M +wifi (was also considering the MSI mortar but I dont like that the graphics card goes in the 2nd slot) 7800X3D 7900XTX Sapphire Nitro+vapor ASUS Strix LC II AiO 360 WD-Black SN850X 2TB Trident Neo 64GB 6k 2 bottom, 1 rear Noctua PWM 12x25 120mm Corsair SF850L

If this could fit more than one 3.5" drive I would totally use this for my new unraid server.

Whats the difference between this and the d41 version

If it HDMI and USB why not just use a USB video adaptor? You could then use a mother board USB header and have a much cleaner install?

Has anyone else noticed that one Jonsbo case [the slide off one] is just a repurposed Razer Core eGPU dock? If it's not, it looks almost identical. Too bad it doesn't have 360mm rad support >

I really don't like the idea that these performance monitor screens has to be plugged into the gpu. It should be a usb device with it's own processor, so it doesn't create problems when you mess with your monitor configurations. That can of course be remedied by adding a raspberry pi or something.

Could this fit a Asus ROG Strix B550-F motherboard and a ASUS ROG Strix NVIDIA GeForce RTX 3050 OC Edition ????

D31 white mesh is selling in my country for $48 Quite asweet deal imho 9:45

Th is case has the same price as the ap 201,, I’m torn

👍 Отличный обзор .

So can I put a 4090fe in here?

just ordered one for a tinker build with my old parts 5800x3d 3080ti

10 degrees GPU over the Asus AP201 is huge! I would absolutely not buy this case over the Asus based on that. Were the cases equally ventilated or did the Asus have extra fans. This needs to be clarified for us to get a good idea of the difference in cooling.

these features where once implemented way back when now there just LCD screen and want to sell it these feature at a higher cost...

That GPU sag is real

why show your gpu 7650xt not 6650xt?

That how N4 color looks there's nothing wrong with it lol even vynal wrap on a car with mat black looks the same

I was interested in this case because I am monitor freak and this was a convenient feature and I am able to pull out extra green but the quality has to be top notch - its like paying for expensive coke and ending with speed. No go for me. Too bad, I was really looking forward to these cases. Imo NZXT steam rolls'em.

I got this case and the screen is DOA

I would just throw up a BSOD on it and call it a day.

wow the sag.....

Nice review, thanks. That front panel screen is interesting but I'm otherwise not impressed with the build quality.

are adult aged humans really impressed by the screen ?:)

if it just a secondary screen.. then run Rainmeter and Wallpaper Engine.

Rainmeter is a great option for the panel and free, will give you all the AIDA64 options and save you sixty bucks.

That GPU is sagging hard.

RX 7650?? XD

:0

bros gpu saggin all day looooooooooooong

It’s much cheaper in Asia than US. At US prices, it is simply not worth it due to its shoddy build quality.

looks like a cheap build quality for the price tag tbh.

They call it a mesh but it's not mesh....

cheaply built case, it wont last.. cant believe on the plastic clips