They forgot the vibration! Milwaukee 2836-20 M18 FUEL Oscillating Multi-Tool Review [2836-21]

Рет қаралды 58,007

Жыл бұрын

An oscillating multi-tool is a great choice of tool when you need to plunge cut into plywood or 2x material, or if you need to make intricate cuts to remove baseboard or trim. This Milwaukee 2836 M18 FUEL Oscillating Multi-tool has impressive performance, and it's near equal in the ergonomics and comfort realm as well. With the floating spindle, the vibrations from the 20,000 OPM don't reverberate nearly as bad as other OMTs we've used. #milwaukeetool #nothingbutheavyduty #review
Milwaukee 2836-20 Multi-Tool (bare tool): homedepot.sjv.io/VmaeoJ
Milwaukee 2836-21 Multi-Tool Kit: homedepot.sjv.io/ZQb100
9-blade Milwaukee OMT Blade Kit: homedepot.sjv.io/JzbKke
Keep current with our great content:
KZfaq: / shoptoolreviews
Instagram: / shoptoolreviews
TikTok: / shoptoolreviews
Facebook: / shoptoolreviews
Twitter: / shoptoolreviews

Пікірлер: 42

@jareddelfino5839 Жыл бұрын

Great demo. Been looking at this for a while. Looks like it'll be great for cutting floors for hvac vents. Thanks.

@jukio02 Жыл бұрын

I'm going to buy this tool very soon. Had my eye on it for quite some time.

@OUTILSCLIPSQC Жыл бұрын

I have this unit for 2 years and i use it everyday since ! The cut speed and torque is just unmatch regardless the brand i use it a lot for remodling also! I like my milwaukee tools.

@MarkoKastellon 6 ай бұрын

Thanks S. Good info!

@norzoloco1 Жыл бұрын

I have had several plug in feins, 18v Ryobi and the newer Ryobi HP, and the newest DeWalt. The M18 fuel blows them ALL away. It's not even in the same category. Pair it with Diablo carbide blades and you can cut things that you would need a cut off wheel for!

@danielkey929 5 ай бұрын

GOOD JOB!

@ToolsInAction4u Жыл бұрын

Love my m12 fuel version, it definitely prefers the 4ah and 6ah batteries. But compared to the Ryobi, Kobalt, and Dewalt ones I’ve had in the past it’s a HUGE improvement. My only complaint is the battery indicator eventually gets dust behind it and you can’t see the battery level. I ended up removing that tiny plastic cover over the LEDs.

@gittekrog-meyerholmen2223 10 ай бұрын

While the description says "tool only" it does come with one each of a bi-metal kzfaq.infoUgkx0vyBwjtx9GGOuiqUVT2sRoYqmDoNT_RI and HCS blade plus an adaptor plate for non-DeWalt blades. Wish I had known that before I bought the blade kit, but oh well. Since I already have a DeWalt drill, charger and batteries there was no need to buy more of those so this was a great deal.There is one other consideration. DeWalt does't sell the depth guide separately so you need to buy the three parts which make it up -- the N275350 block assy, the N275341 metal rod and the N278801 knob. Amazon does sell all three.

@WillBray 11 ай бұрын

I’ve just bought this for some home renovations.

@TheSirPotato Жыл бұрын

This is the best multi tool I have used, im in the DeWalt/metabo hpt platforms but this multi tool makes me want to try a battery adapter

@moparkr Жыл бұрын

guy i work with bought the m12 version, off the truck about $270. i'm cheap and got the harbor freight warrior with another battery for about $45. the milwaukee felt way to bulky, almost needed 2 hands to use it. for what we are using them for, cheap was the way to go.

@MrNightro Жыл бұрын

I literally just had this delivered to my doorstep by DHL six hours ago...

@georgef1176 Жыл бұрын

I never use these but I have the basic m12 version and it’s not bad at least the one time I used it lol

@Techprep23 Жыл бұрын

Wonder how it compares to ridgid's new brushless one. I'm not switching battery platforms for one tool

@DixieNormous1 Жыл бұрын

I have the M12 Fuel, it has the most occilation of any of them. I use a 6 amp battery... I have used the heck out of it and it's starting to make some weird noises😅😅😅

@Gingerhomeandgarden Жыл бұрын

Maybe I need this instead of circular saw? I always have to wait for a board to get ripped. His circular saw is to heavy to big. It's a corded version. I wanted a smaller circular saw (wood crafts not building a house with it lol) I may been to peak... my issue is home depot has the m12 stuff up so high I can't hold it or see it.... frustrating.... women love tools too.

@darrelldawson4041 9 ай бұрын

Ive lost my blade screw after the first use, which was months ago. I cant find the specs on the bolt used. Anyone have any recommendations or links for a proper replacement?

@Griffinwoodworks Жыл бұрын

I have the m12 fuel myself, and it’s better than any 18/20 volt multitool I’ve used, and that includes the Dewalt XR. It’s hard to imagine one being better than that one, but I don’t see Milwaukee making a more expensive one with less performance lol.

@DixieNormous1 Жыл бұрын

I had the DeWalt for years, it doesn't have much oscillation, it takes forever to cut through anything... The only thing it's good for is the blade change

@Griffinwoodworks Жыл бұрын

@@DixieNormous1 but that blade change is pretty awesome.

@cam99ta9 Жыл бұрын

I have both the M12 Fuel and the M18 Fuel and while the M12 is nice, the M18 and it's auto mode make it the best I have ever used as a remodeler.

@DixieNormous1 Жыл бұрын

@@cam99ta9 yeah my m-12 has about bit the dust, I used it today it was making lots of noises

@tonybarrett2245 11 ай бұрын

@@DixieNormous1mines doing the same thing, it's about three yrs old. I just purchased the M18, RIP M12.

@DamionJR4923 Жыл бұрын

I forgot how loud these things are

@is5032 Жыл бұрын

Hasn’t this tool been out for a couple of years now?

@engineer_alv Жыл бұрын

For a moment I thought this was a new gen, but after a quick search I realized it's the same OMT from 2-3 years ago

@Enriiquegomez Жыл бұрын

I’m sure it’s good but I love my dewalt with the super easy blade change!

@printfailure Жыл бұрын

Why does the screw on mine not hold the blade. It always backs itself out

@michaelwilliams5506 6 ай бұрын

Are you tightening it down the that lever up and then closing it? It shouldn't be able to back out since that lever causes it to have plenty of pressure to hold it in place

@eeemuse Жыл бұрын

Why Milwaukee have different model names in the UK compared to the US when it's the same tools, it makes searching and watching reviews much harder.

@Ninoo187 4 ай бұрын

Just got the tool only variant for 60 bucks, I offered it to my brother and he passed up on it. His loss 🤷

@SamiDurm Жыл бұрын

For me, the M12 is better

@Taylor57179 Жыл бұрын

They should make the head swivel instead of one set position

@dangrimes5078 Жыл бұрын

WTH I have an M12 and it doesn't cut like that. Maybe it's the blades I'm using.

@michaelwilliams5506 6 ай бұрын

It's the power and oscillating range of this one. I've used the m12 and I've had the standard m18 for several years. I just got this m18 fuel version, and the speed with which it cuts is incredibly fast. OMG