This $70 Stack does it all - Speedybee F405 V3

Рет қаралды 35,343

Жыл бұрын

This is the stack I will be using for my 2022 Budget Build.
Video will be released in a few days!
Speedybee F405 V3 Stack - bit.ly/3L4SpMJ
Micro SD card for Blackbox - bit.ly/3BvihOD
(For information on what SD cards work with Betaflight Blackbox refer to this link: bit.ly/3RP2cJD)
How-to add bluetooth to any FPV drone: • Add Bluetooth to ANY F...
__________________________________________________________________________
Support the channel by clicking these affiliate links when purchasing parts at these sites!
RDQ - bit.ly/3Cg16Bg
GetFPV - bit.ly/3RroJf8 (5% off Coupon - 0KC6D3YB02RN)
BetaFPV - bit.ly/3E07NbW
Banggood - bit.ly/3xRFHM3
Insta360 - bit.ly/3dHq4jz
__________________________________________________________________________
Just getting into FPV?
This kit includes everything you need to get started!
bit.ly/3oVgg7a
Recommended Budget Gear:
Controller - www.banggood.com/custlink/vKD...
Goggles - www.banggood.com/custlink/GKK...
Frames
5”: RDQ Sourceone V3: bit.ly/3vCnPDC
5”: iFlight XL5: bit.ly/3wfgwTr
3”: Shendrone Squirt V2: bit.ly/3bu3zNQ
2.5”: Betafpv Pavo25: bit.ly/3Nhmet7
Flight Controllers
30x30 Mamba F7 MK4 Stack: bit.ly/3zUDPU9
20x20 Mamba F7 MK4 Stack: bit.ly/3JqdUa6
26x26 (Whoop) iFlight Beast AIO: bit.ly/3oQ8KdR
Motors
Xilo Stealth Motors - bit.ly/3fdnVqu
Emax ECO II Motors: bit.ly/34QovLv
HGLRC 3600kv Motors: bit.ly/3SnakRY
Digital DJI System
DJI FPV Goggles V2: bit.ly/3qfTEzr
Caddx Polar Vista: bit.ly/3tsqTSp
TX/RX
TBS Crossfire: www.getfpv.com/tbs-crossfire-...
ELRS rx: bit.ly/3CC661m
ELRS tx: bit.ly/3MWPUNc
Batteries:
6s Tattu 1050: bit.ly/3ztaJJZ
6s GNB 1100: www.banggood.com/custlink/G33...
4s CNHL 650: bit.ly/3zUOFti
4s BetaFPV 750: bit.ly/3Sq8MXq
Other Equipment:
My Backpack: bit.ly/3zU9G7j
Electric Multi-tool: www.banggood.com/custlink/GDK...
Soldering Iron: amzn.to/3wXXjp1
Naked GoPro Hero 8 Case & BEC: bit.ly/3yuWjI5
DJI Air 2 S: amzn.to/3wfAxcy
GoPro Hero 9: amzn.to/349z9Ju
GoPro Hero 10: amzn.to/3ILPAyC
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I will receive a small commission. This helps support this channel and allows me to continue to make videos like this. Thank you for your support!

Пікірлер: 79

@monkeyfpv7866 Жыл бұрын

I purchased one a few weeks ago, love it. So easy to set up with the app on my phone. I’m about to order another before prices increase due to demand. Well done speedybee on an amazing stack.

@jacobgutierrez5064 Жыл бұрын

pre ordered lets gooo cant wait for my next build!!!!!!!!!!!!!!!!!!!! thanks for this

@wisider Жыл бұрын

I'm learning a lot by watching your videos. Excellent job. Thnx for sharing 💜

@TRONCATFPV Жыл бұрын

I'm glad that they help!

@ryanm.191 7 ай бұрын

I built a couple drones when I was younger and had more time, shelved when when I had to go to uni and cracked them back out, but they still have naze32 boards which is a pain in the ass to use. Looking to upgrade and I think this is the board for me to use as I also look to upgrade to full dji kit the air 3, controller and goggles as I still use a £15 hobby king goggles set that only shows 240p and a fly sky clone controller. The bad old analogue days.

@cyberfly8452 6 ай бұрын

Nice review thanks !

@edhog Жыл бұрын

You decided my next flight controller for me - thanks for the effort mate.

@TRONCATFPV Жыл бұрын

Glad the video helped!

@tristanrigdon7068 Жыл бұрын

Same!

@mateuszjasek Жыл бұрын

I personally find solder pads on only 1 side very nice from waterproofing perspective.

@kaptkrunchfpv Жыл бұрын

Currently building my first quad with this stack, its even more bad ass than I thought!

@TRONCATFPV Жыл бұрын

right?! for an F405 its pretty impressive lol

@FastSloW-qt8xf Жыл бұрын

I've had nothing but good experiences with speedy bee branded products

@pingofthething5446 Жыл бұрын

Just put this in my first ever build, even for a beginner in the world of drones (i fly nitro helis and fixed wing) it was easy to work with, love it 💪

@rajanyt7343 10 ай бұрын

Bruh, I'm looking forward to put this FC in my pusher fixed. Is there any doc or guide available on this particular thing.

@rajanyt7343 10 ай бұрын

Is it possible to convert F405 v3 to fixed wing use.

@Carguyforlife 11 ай бұрын

I have bought a total of 3 of these FC+ESC stacks and 1 of the FC's by itself. I have no long term experience with it, but I can without a doubt say that it comes with Betaflight 4.3.2 installed, and if you upgrade to betaflight 4.4.2 and use a 32gb microsd card for blackbox logging you will have issues with your OSD.

@Carguyforlife 11 ай бұрын

I have built two quads with this FC+ESC stack because of your 2022 budget build. Loving all the features, I am trying to install a runcam thumb but not sure the best spot to solder the power lead. On one I have it on the 5V and G for the LED strips, the other its on the 5V and G for the buzzer. Is there something I have to configure in betaflight to get it to power the runcam? I assumed it would just have power... Thanks for the good videos!!

@challengedollar2880 5 ай бұрын

Hey thanks for this. Do i need to use a extra Power Distribution Board with this?

@jdetka 4 ай бұрын

Thanks for the walkthrough. I'm getting all the parts together to complete the 2022 budget build and I had a question. I'd like to build my drone so that it uses my FrSky Taranis X9 Lite Transmitter and it has a FrSky 2.4GHz 16 Channel XJT Lite External Module. Not sure what video receiver I should use it and how to connect it to the flight controller? Any tips or suggestions?

@andriyyeromenko7695 11 ай бұрын

This stack has a some problem. When its uses an SD logging the OSD cant work properly

@samtarariverasanchez59 Жыл бұрын

Just bought two with two caddex vista nebula pro

@TechHobbyGear 3 ай бұрын

Thanks for the very informative video. Anyway i would need someone advice. May i know can i use this FC and ESC on my old F450 build (TBS), i have Emax 2212 II 810KV Motor? Previously i am using Pixhawk with 30A Hobbyking ESC which abit whobby ....

@tanimator87 Жыл бұрын

Great vid and thanks for all of the info. Do you think this stack could be used as a substitute on your 2.5 inch cinewhoop?

@TRONCATFPV Жыл бұрын

This stack unfortunately wont fit that frame since this is 30x30

@onstra-zp6oo 4 ай бұрын

Hi Nice revieuw. does this controller works with regulaar ppm reciever ? like 4 channel s? Thnks Frank

@daudprabowo465 Жыл бұрын

Have u tried INAV on this FC? Since mine have trouble on ESC protocol (available only multishot) n motor didnt want to spin.

@drippyash7376 Жыл бұрын

Please drop the build now !

@J2_P Жыл бұрын

Thanks for this quick review! Very interesting! Two 4.5v pads! I always wanted that! And also in front and back :) not on side... So sexy :). Could you give esc MOSFETs reference? Thanks in advance.

@Photo-real 2 ай бұрын

I built my drone using the speedybee f405 v3 with the fs ia6b receiver and using the flysky fs i6 controller, there is one problem, everything connects but the drone does move at all but when I open something like betaflight it shows that it's working fine. So what could be the problem, this is my graduation project Thank you

@chrisrivington 10 ай бұрын

How do I use the camera control pad??

@vibrantfotoz5162 8 ай бұрын

Which VIDEO TRANSMITTER and RECEIVER supports DJI REMOTE CONTROL AND DJI GOOGLES

@auricom24 10 ай бұрын

Does it have pins for gimbal?

@wesleyclements804 Жыл бұрын

Great video. I was wondering what sd card size you use for your goggles.

@TRONCATFPV Жыл бұрын

For my DJI goggles I have a 64gb. On my Orqas I have a 16 or 32

@flat-earther 10 ай бұрын

how to use the S9 pad for PWM output on this FC?

@EagleFPV43 10 ай бұрын

Have you had problems with the osd disappearing while recording to the blackbox??

@sahilmansoori3511 Ай бұрын

Will it fly fixed wing if flashed with inav?

@skyeyespr2729 8 ай бұрын

That fc support ibus?

@rokonfpv3040 Жыл бұрын

Really thoughtful design this - can you comment on the FETs on the ESC and their Perceived reliability?

@TRONCATFPV Жыл бұрын

So far its flying great! HAven't had any issues with it 👍

@gabrielnunes159 3 ай бұрын

Hello my friend! Thanks for your great video! One question: I have the F405 V3 and try to use blackbox with SDCard but no sucess. I tried to change the settings, use BF 4.4.X, 4.3.X, 4.2.X but nothing worked... I tried both SDHC 8GB and SDXC 64 GB... Format them to FAT32 with 4096, 8192, and all kb possible... I also did a partision with only 2GB on the cards but no sucess... Any ideia what may be happening, and how I can fix it and finally use the blackbox? Thank you so much in advance, BR.

@deltadrone 9 ай бұрын

Nice vidéo! What is the FC firmware? SPEEDYBEEF405V3 or STM32F405 ?

@NeoFlowFPV Жыл бұрын

were can i get this in the uk please ?

@rajanyt7343 10 ай бұрын

Is it possible to install ardupilot on this ?????

@GeraldTrost Жыл бұрын

hi! I am new to drones so I wonder if these can also fly very very slowly and - keeping the height - also hover under my car in order to inspect my car bottom. any ideas?

@lacoaerials7985 Жыл бұрын

Hi! You can totally fly slow and steady with enough practice, but for inspecting your car i think you are better off with a GoPro on a selfie stick. Quads are cool but spaces that tight require too much precision and effort in contrast with more standard filming tecniques. Maybe consider starting FPV for freestyle or making some cool shots like the ones in TRONCAT's channel, hope this helped you ;)

@POLARISFPV Жыл бұрын

Is it just me or is this the best pad layout for a flight controller ?

@TRONCATFPV Жыл бұрын

agreed 100%. Having all the pads on the top and bottom of the board is awesome. Don't have to deal with wires hanging over the side of the FC!

@chrisbee5481 Жыл бұрын

Wow the price has become affordable again

@haydnholder7090 Жыл бұрын

Where can i get the screws that go threw the stack? Mine didnt come with any

@TRONCATFPV Жыл бұрын

I would contact speedybee, that should come with any stack

@StellarFPV Жыл бұрын

Does the speedy Bee stack come with the LEDs?

@TRONCATFPV Жыл бұрын

it doesn't, they are a separate item but are only $5 for a pack of 4 LED strips

@StellarFPV Жыл бұрын

@@TRONCATFPV what are they called? I don't recall seeing a link to them in the video description

@peekabooooooooo Жыл бұрын

Can bluejay be flashed to this ESC do you know? I'd want to access RPM filtering if so. Thanks man.

@TRONCATFPV Жыл бұрын

From what I understand Bluejay shouldn't be flashed to this board, it can cause twitches and won't fly too well.

@grippfpv3465 Жыл бұрын

I have updated to bluejay and run filtering. I have not experienced any twitching, it flies great

@TRONCATFPV Жыл бұрын

@@grippfpv3465 good to know! Speedybee advised against flashing bluejay to it as they had issues. What is your setup with this stack exactly?

@Life_a_bike 9 ай бұрын

Why would you add LED’s? It only eats volts… Nice stack doh!

@pirminbritschgi1530 Жыл бұрын

Hy is this works wit the new fatshark HQ AVATAR System?

@TRONCATFPV Жыл бұрын

yup!

@pepper8048 11 ай бұрын

I purchased the speedy bee F7 V3 stack. I received it with bent pins. I always inspect the ports before using a product. I contacted Speedybee and they offered me a 20% discount on replacing their defective product. Be careful working with them. If you end up with a defect, they blame you instead of offering any customer service to rectify their failure. I'll personally never use another Speedybee product and I'll not repair any quad containing their products. Be careful with they so called "warranty" claims. They don't actually warranty their products.

@mondomikeg4921 Жыл бұрын

Heya, I just got this stack in the mail today and I am excited to finally build my first drone. I had a question for you all. I have a 5" frame and since it is going to be my first build I don't think I need a crazy high kv motor. I would like for it to run for more than 2 minutes also. Hence I am thinking of a lower kv motor and more of a cinematic drone build that I can take on hikes with me. So to the drone community out there what size and kv motors do you use and or recommend. Best Wishes = )

@FastSloW-qt8xf Жыл бұрын

You can always build a 6s setup and run 4s for docile flight. And then when you have more experience you just need to buy a 6s and go from mild to wild

@matteocorradetti4625 Жыл бұрын

Does anyone know if it is Elrs compatible?

@TRONCATFPV Жыл бұрын

Yes you can use an ELRS receiver with this flight controller 👍

@Flumphinator Жыл бұрын

PSA: you must enable MSP on UART4 to use Bluetooth!!

@rorymace Жыл бұрын

dose it have dvr?

@TRONCATFPV Жыл бұрын

It doesn't have on board DVR, thats usually the kind of thing you record on the goggles

@rorymace Жыл бұрын

@@TRONCATFPV sorry i meant osd

@EagleFPV43 10 ай бұрын

@@rorymaceyes

@FelixGA9 Жыл бұрын

Rofl……sadly I’ll never buy a speedybee stack ever again, the last time I did I ended up with a piece of Junk that desynced every flight, back and forth with speedybee and instead of replacing their faulty esc they sent me a frame which I didn’t want or need and was less than half the dollar value spent on the stack.

@AlphaSteelFang005 Жыл бұрын

What stack would you recommend? Something that you can set it and forget it and not have to worry about

@FelixGA9 Жыл бұрын

@@AlphaSteelFang005 . Currently I don’t know..the landscape has changed with the unavailability of the old gyros, the new boards are unknown as far as performance. Some of my ama club members own this stack and say it’s great. I’ve not had any issues with diatone, iflight, Aikon stacks. But, those are all running the old reliable gyro, honestly I couldn’t tell you what’s proven good yet from boards made this year….

@AlphaSteelFang005 Жыл бұрын

@@FelixGA9 all good

@doncunningham3124 Жыл бұрын

I've built 2 different quads with this stack. One freestyle and the other LR. Both are awesome and not just for performance. I'm a stickler for clean builds. This stack is awesome based on today's standards and availability.