SpeedyBee F405 Wing - Connection Basics
Рет қаралды 45,481
Күн бұрынDetailed explanation of connections to the SpeedyBee F405 Wing APP, including SBUS and CRSF / ELRS receivers, GPS, Digital and Analog FPV, Air speed sensors, ESC / motors and servos.
SpeedyBee product page - www.speedybee.com/speedybee-f...
Review and flight footage - • SpeedyBee F405 Wing FCB
Updated firmware to enable Soft Serial - newtonairlines.blogspot.com/20...
Like, Subscribe & Ding the 🔔 - bit.ly/ANsubscribe
🔎 More information 🔍
► Newton Airlines Uncut - bit.ly/NewtonAirlinesUncut
► Newton Airlines blog - newtonairlines.blogspot.com.au
► Build plans - newtonairlines.blogspot.com/se...
► My portal - anewton.net
► My Thingiverse - www.thingiverse.com/andrewrcn...
► iNav Basics and FAQs - newtonairlines.blogspot.com/s...
► Depron Armin Wing build - • Depron wing build
► Skyshark P4X spars - www.kitesandfunthings.com/Pro...
👌🏽Support this channel 👌🏽
This is a fun hobby for me, not a money making venture. I don't have a Patreon account, and choose the minimum possible advertising option.
However if you would like to show your appreciation and support this channel here are some options -
►Paypal donations to apnewton@gmail.com
►Affiliate links - Purchase using the links provided in the video description.
If you use the affiliate links to make a purchase I may receive a commission at no extra cost to you.
👀 No single review will tell the whole story. Be clever, watch other reviews and shop around before making any purchase.
#AndrewNewton #speedybee #connections
@ryanbaillie5009 Жыл бұрын
Perfect video/Perfect timing. Mr Newton, I'm a 40yr old cabinet maker out here in San Diego CA who has been dreaming of flying FPV for years. I don't know a single soul who is into this hobby and unfortunately there's not any helpful friendly shops around to help a guy figure things out that I've found. You Sir, have been the most helpful, patient informative mentor to me. I have an enormous amount of respect and admiration for you and have come to really enjoy your videos and your calm relaxing form of teaching. I can't imagine how I would have been able to put all the pieces of this great hobby together without your guidance. Sincerely, Thank you.
@AndrewNewton Жыл бұрын
Thanks Ryan, your comment makes me happy. I remember the frustration of not being able to find good clear information when I was starting out.
@robertfpv7733 Жыл бұрын
Do a google search for local Rc flying clubs in your area you might find one near by. People who are in the rc hobby are generally friendly and willing to share what they know. Anyways goodluck
@Gingerbeast-sy2ly Жыл бұрын
I love the information and way you go about showing how you setup your aircraft, I recently bought the same f405 flight controller per watching your reviews of it and experience with these things and have almost everything setup , I am new to using or flashing firmwares to use the uart ports for recievers, I know it supports sbus , but would the same sbus port support the betafpv elrs pwm micro rx , it's the only elrs rx that binds to my jumper tlite but even when connected to the sbus port it connects, with that it will not translate stick movements, my question is have I done something wrong, have I missed something, or will I have to change settings in inav setup for the flight controller, or something else. Any help or advice is greatly appreciated, I'm just really looking forward to get this setup properly and be able to get my ck wing in the air finally , thank you all in advance for helping me with this issue
@YT-qp3xw 9 ай бұрын
I agree...as 1st timer in fixed wing from quad flyer, your videos are very informative and easy for me to understand.....keep it going, sir
@jamesmoore9008 8 ай бұрын
newbeedrone shop is in San Diego sells this Flight Controller and fpv gear. An RC Club will have member into FPV. I'm in North County and in Palomar RC Flyers.
@dimitrisargyris 2 ай бұрын
As someone entirely new to the world of fixed-wing flight controllers, this video was an exceptional resource. The breakdown was concise, and expertly delivered. Your explanations were easy to understand and applicable even for me, who has zero prior drone experience. This informative guide has definitely helped me with not burning my house to the ground or giving up midway because I can't find my way with the connections. Thanks a LOT
@AndrewNewton 2 ай бұрын
Great to hear that Dimitri.
@BeetleBeetleY Жыл бұрын
Great video, Andrew. I'm certain there are many new folks who will value this. Cheers!
@53roger 11 ай бұрын
Great video and many helpful hints for the beginner. Thanks. I struggled mightily years ago when i came back to rc flight.
@probante Жыл бұрын
Thanks so much Andrew! It is literally what I was expecting! Great as usual. ❤️
@jhan1962 Жыл бұрын
Thx Andrew, Very helpful to see exactly how to use this board. Just ordered one!
@MattBalder 3 ай бұрын
Thank you for the very informative video! This is my first time using a SpeedyBee board after just using Matek in the past. You definitely got my questions answered and I feel confident going forward!
@AndrewNewton 3 ай бұрын
You're welcome!
@aGGreSSiv 8 ай бұрын
I opened the box now, I was worried if I did something wrong. You explained everything very well. Thank you for this useful video.
@lleston8927 9 ай бұрын
Thank you for this amazing and detailed video! Mr Andrew you are a legend!
@AndrewNewton 9 ай бұрын
Thanks, I'm happy with this one.
@libmananchannel Жыл бұрын
Hello "Andrew Newton"! Thank you for showing us such a wonderful video! I feel so happy! I'm looking forward to your next work! Have a nice day!
@tomling9310 9 ай бұрын
You have no idea how helpful this has been. THANK YOU!!
@AndrewNewton 9 ай бұрын
Excellent. I am quite happy with this video.
@sewerfly619 Жыл бұрын
I've been searching every day here on KZfaq now finally This video is just what I needed Thank you so much. SUBSCRIBED, LIKED 👍
@AndrewNewton Жыл бұрын
Bingo! Thanks
@nikolaribic7956 Ай бұрын
Thank you very much, Mr. Newton. I just picked up the SB F450 WING FC and I'm new to INAV and FC's, so your video was something I really appreciated. It was concise, yet not lacking in relevant information. I've subscribed to you channel and I will certainly be checking out your other videos as I go through the assembly/build process. I look forward to learning from you.
@AndrewNewton Ай бұрын
Great to hear!
@Videolinquency Жыл бұрын
Aimed at beginners maybe, but I started FPV in the noughties before the term was even coined, and I still learned a thing or two here. Thank you.
@tonytruelove3576 Жыл бұрын
Having returned to the sport after 20 years away, I can not believe the technology available now! Well described yet again, even I now have some understanding of this amazing unit. Thanks Andrew
@AndrewNewton Жыл бұрын
Good to hear Tony.
@ap_111s4 9 ай бұрын
Really well explained video, very useful. Thank you!
@AndrewNewton 9 ай бұрын
You're very welcome!
@Nicklz5555 Ай бұрын
As always Mr Newton a great watch and learning experience to get me back up to speed with these complicated little things of our hobby. Been away for a few years and tbh not much had changed apart from more hd stuff available now so need to look into it as soon as funds allow haha . Thanks again and happy flying. Regards Nick
@AndrewNewton Ай бұрын
Yes the HD gear is a big leap forward
@mickeyfilmer5551 6 ай бұрын
Thank Goodness I came across this video! I have one on order from the States to UK (I bought the SpeedyBee F405 V3 BLS 50A 30x30 FC&ESC Stack by mistake ) I would have made some serious errors but for your brilliant info contained herein. Many Thanks- subscribed and notifications on, as I will be a frequent visitor from now on.
@AndrewNewton 6 ай бұрын
Welcome Mickey. This video is proving to be quite popular. Good luck with your INAV adventures
@nellodude 3 ай бұрын
Thanks Andrew. Hours of wasting my time to find out which Port/UART the Serial SBUS was supposed to be on in INav and you fixed that in a few minutes.
@AndrewNewton 3 ай бұрын
Haha, happy to oblige sir
@edgarespinoza3915 Ай бұрын
Thank you for posting all your videos on youtube. they have been very helpful to me in figuring things out. I'm new to the hobby and if it wasnt for you videos I probably would have thrown everything away by now from frustration! lol..... but I'm getting it little by little now.. thanks again!
@AndrewNewton Ай бұрын
Excellent, I remember when I was in your situation
@fatoomsh1 11 ай бұрын
Thank you so much. That was the perfect introduction for me.
@AndrewNewton 11 ай бұрын
Glad it was helpful!
@birdmantelly007 9 ай бұрын
I got back in touch with my dealer. He got in touch with SpeedyBee. Wowee !!!! What a difference experience makes !!! Looks like I have three good goers !!!
@AndrewNewton 9 ай бұрын
What was wrong?
@moneyhunster Ай бұрын
Awesome video. I'm looking forward to fitting this in my wing now thanks to you 👍
@AndrewNewton Ай бұрын
Good luck
@gogus357 Жыл бұрын
Andrew Thanks u so moch🤗 for this wideo its gonna be moch helpful for as all ❤ May the force be with you 🖖
@christiandeboor6130 3 ай бұрын
Hey Andrew, thanks a lot for this helpfull video. I'm a beginner and some things are now clearer
@AndrewNewton 3 ай бұрын
Great to hear. fly on!
@MessingWithCode 5 ай бұрын
Great Video , As Always!!!
@Ozbird-72 9 ай бұрын
Great tutorials. Very well done!
@AndrewNewton 9 ай бұрын
Thank you! Cheers!
@Alen.88 Жыл бұрын
Thank you for the video and in detail explanation.
@fp-AvERY 6 ай бұрын
Finally a helpful video, thank you so so much. Setting up my first wing now see you in the skies.
@AndrewNewton 6 ай бұрын
Have a look at my Simplified INAV video too. Good luck
@The_Pub_ Жыл бұрын
Thank you Dr Newton.... Good lesson.
@emmanuelsab1095 11 ай бұрын
very useful , thanks andrew
@juancoleon4520 3 ай бұрын
ABSOLUTELY AWESOME VIDEO.. YOUR PROCESS WAS DEF ON POINT ,, TY GREATLY
@AndrewNewton 3 ай бұрын
Thanks Juan. Probably one of the most useful videos I have made.
@rikardblom7643 Ай бұрын
Brilliant instructions. Short, precise and exactly what you want to know. Just that and nothing else. Different a lot from other guys who make instructional videos. Good work! More of this! Thanks!
@AndrewNewton Ай бұрын
Many thanks. Mission accomplished!
@TheFlagInspector Ай бұрын
wow great video. Cleared up sooo much for me. Thank you Thank you Thank you.
@AndrewNewton 29 күн бұрын
Excellent, mission accomplished
@adrianau4246 Жыл бұрын
I wanted to build my own rc plane , I build drones but a fc like this is great for beginners! Just what I’ve been waiting for!
@adrianau4246 Жыл бұрын
Where’s aux 1-6?
@AndrewNewton Жыл бұрын
Not sure what they are, quad terminology maybe?
@AndrewNewton Жыл бұрын
Aux1-6 is Ch5-11
@Pilotkosinus 6 ай бұрын
thanks for the video ♥
@terrymurphy562 Жыл бұрын
Superb Andrew 👍
@Tammy-un3ql Жыл бұрын
thank you for sharing your skills....
@lasersbee Жыл бұрын
Thanks Andrew... I needed that... now to figure out where and how to connect my Walksnail and HDzero HD cameras.
@TheCatFather01 Жыл бұрын
First socket, opposite to the cam port, min 12:08, follow the toothpick 😅
@AndrewNewton Жыл бұрын
Thanks again Catdad
@yucekaya1622 11 ай бұрын
nice explanation. Thanks.
@AndrewNewton 11 ай бұрын
Glad you liked it
@giov3z 11 ай бұрын
thanks a lot
@mspi2208 Жыл бұрын
Thanks!
@AndrewNewton Жыл бұрын
Thanks Mark.
@joshuajames9224 Ай бұрын
Many thanks.
@AndrewNewton Ай бұрын
Welcome 😊
@kevalinopicks5555 Жыл бұрын
Another brilliant video, Andrew. Mine arrived yesterday so great timing! It looks an excellent FC but I still wonder why someone couldn't supply one with the pins pre-soldered.
@AndrewNewton Жыл бұрын
AtomRC have a pre soldered F405 (maybe only pre soldered with the Swordfish RTH version)
@davidlee50 8 ай бұрын
Thanks, I'm going to use this in my CTH ALBATROSS 46" in the maiden.
@Crottorfer Жыл бұрын
Good explanatory video! But what I miss is the connection setup via Wi-Fi, so you can do without the annoying cable when setting up the flight controller. Best regards!
@AndrewNewton Жыл бұрын
Wifi setup in the review video
@billarnall1422 10 ай бұрын
Hi Andrew I love the simple way you explain everything. I have the speedybee 405. Am I right that the port for vtx smart audio is uart6? Thanks for any help.
@blatezers5973 Жыл бұрын
i ordered one yesterday
@sakarrc5001 Жыл бұрын
Couldn't be more on time. Mine just arrived and soldering the pins :) hihihihi
@sakarrc5001 Жыл бұрын
As an addition, RX2 pin in the telemetry connector is connected to the inverter on the SBUS pin. (same inputs) Very convenient for Mavlink/RC transceivers.
@endliberalism4305 8 ай бұрын
Candy you tell me if I have to use the ELRS pin out to get full Rssi telemetry with my crossfire Rx , or can I still get telemetry using the s-bus pin out ? I’m using the 03 AU but I will not be using the dji radio, I’m using a crossfire v2 micro Rx… thank you ….
@jwtfpv8957 Жыл бұрын
Great video! I'd be curious to see this board being used in conjunction with Ardupilot specifically PPM.
@AndrewNewton Жыл бұрын
Painles360 might be the man to help
@Lawzy 10 ай бұрын
Hi Andrew. First off, this review and the others in your series on the F405 has been invaluable. I’m adding FPV to my LOS fleet, where I use a Spektrum receiver. Can you or any of your subscribers guide me on the best way to interface the two (Spektrum & F405)?
@AndrewNewton 10 ай бұрын
Dont know much about Spektrum but I think you would connect the receiver to UART1 T1 pin and select SRXL2 as the Serial Receiver Provider. Your receivers would have to have SRXL2 Serial output option.
@jamesmoore9008 8 ай бұрын
I saw someone on another youtube video (Steve Salisbury) flying a T-28 in FPV with this Flight Controller using a Spektrum SPM4651T receiver and use a NX10.
@birdmantelly007 9 ай бұрын
I still have three units which look good on Inav but no closer to flying. I see in your review that you used Esc connectors not three pins !!! Good thinking !!!
@danjensen9425 10 ай бұрын
Where do you get the 4 pin connector for gps or crossfire. Great video. Ordered 3 of them. Using the fc esc stack for the quads.
@AndrewNewton 10 ай бұрын
EBAY DuPont connectors.
@grahampenfold6121 Жыл бұрын
Great video. Waiting for delivery of mine. While here can you tell me if Spektrum rx are compatible with open tx transmitter’s, I am fed up with my Spektrum DX8.
@AndrewNewton Жыл бұрын
Thanks, any of the radios with 4 in 1 RF module will work with DSM and DSMX receivers github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/Protocols_Details.md#DSM---6
@Poundy Жыл бұрын
great timing for me too. My SpeedyBee F405 Wing arrived this week. I intend to use it in a yet-to-be-assembled AtomRC/Eachine Seal, with the analog FPV kit they offered. What I took away from this vid was the connectors you use on your VTX setup and adapter pins for what looks to be your "standard" harness configuration for your VTX/camera pins - I would love to see more detail there, but what I saw was you have simply put dupont style 0.1" header pins and sockets on your cam and VTX and spliced to the (supplied) connectors for the specific FC board. Any tips on what the ideal cluster of pins and/or layout you use is? My AtomRC VTX is a TX15 with 5x bare unterminated wires, and has a foxeer toothless cam with 2x wires in one JST micro connector (unconnected perhaps, as they didn't supply a jst on a cable?) cable and 3x wires in a second jst. I guess I aught to figure out what those wires all do :)
@AndrewNewton Жыл бұрын
Can't expect anything to have the right connectors unfortunately. You will have to make up your own cables from the supplied AtomRC and Speed bees
@skupper672 2 ай бұрын
Fantastic video thank you sir. Got me started! I am only running a DJI 03 to the F405 with a GPS to get hud and flight data. I am not ready to connect a receiver and control the flight surfaces yet. The problem is that the DJI 03 won't arm to high power. Ive hit a wall on it. Is there a setting I can adjust or perhaps jump a connection to trick there Flight controller into arming the DJI 03? Thank you
@AndrewNewton 2 ай бұрын
Thanks. I don't have 03 but I assume you have to connect it to a UART and select MSP DisplayPort for that UART to send arming information.
@TMacDo243 3 ай бұрын
I finally figured out my issue with a Walksnail Avatar with no OSD. Just putting this out there for other people... I had to solder the Avatar VTX wires to the DJI outputs, NOT the 4 wires for the "analog VTX" that's labeled in the manual.
@AndrewNewton 3 ай бұрын
Well done. Which manual says to use the analog outputs?
@TMacDo243 2 ай бұрын
@@AndrewNewton Fair question, and my fault for my misunderstanding. But I will say... the confusion between "tx5" and "vtx" is not clear in either your video or the manual. Having 4 wires from a Walksnail Avatar is more intuitive that it would be connected to the only VTX output with a 4 wire diagram. As someone who doesn't come from an electrical engineering background, "square fits into a square" makes a lot more sense than "square fits into a rectangle." If that makes any sense? There is both an Rx port on analog as well as on digital, so forcing the fit makes sense when it's not specifically clarified. It would be nice for that type of specific clarification in the future. I appreciate all your objective and subjective inputs and your hard work that goes into your videos, but just trying to give some valuable feedback from my perspective. I am currently struggling with getting the OSD to show up with the speedybee f405 wing mini because the manual isn't clear on the analogue vs digital inputs. It labels them, and I've tried using the R5 and T5 outputs and switched them numerous times, but still no luck... So I revisited this video in hopes of getting an answer since your new video doesn't address it. I think my next attempt will be to use the 6 pin plug, but I just prefer to solder. Just something to think about....
@michelebassetti9148 2 ай бұрын
Thank you Andrew, Do you cover ground station with inav via telemetry in some of your videos? How can I run a ground station with realtime monitoring and waypoint update during flight? Thank you
@AndrewNewton 2 ай бұрын
Not an INAV feature yet
@neomayad 11 ай бұрын
I pulled out the red plug from the bec servo connector as you suggested @5:15 And now my motor just beeps repeatedly whenever armed. Any suggestions?
@AndrewNewton 11 ай бұрын
Need to calibrate your ESC
@buzzdev Жыл бұрын
Great tutorial, many thanxs. I'm wondering, how to configure the OSD with Adruplane firmware? Any ideas, please? Thank you.
@AndrewNewton Жыл бұрын
Ask Painless360, I dont use Ardu
@buzzdev Жыл бұрын
@@AndrewNewton Thanxs Andrew, i've figured it out already. It's not GUI config, but using the Ardu PARAMETERS is quite easy in Qgroundcontrol.
@eugeneflorida1408 6 ай бұрын
Bad FC ? The 4 leads that the battery voltage is flashing one after another. They were working correctly. OSD, GPS, working. The Runcam is getting very warm and haven't gotten the sbus to work. Thanks for the help
@upperechelon3456 Жыл бұрын
Great video Andrew [as usual]. I noticed when you plugged in the SBUS receiver you left the voltage plug in. Would that not interfere with the FC board's internal BEC? Also is there anything stopping me from using SBUS connection with my crossfire receivers? Thanks Greetings from Florida.
@AndrewNewton Жыл бұрын
Only the BEC from ESC might interfere with the on-board BEC. Receiver needs power from the board to operate. SBUS should be fine from CRSF, but I have not tried it.
@droneinsights 14 күн бұрын
Thank you for the video, Andrew! Maybe you know where I can find power configuration for 4+1 VTOl plane with SpeedeBee F405? I found only for tricopter VTOl configuration.
@AndrewNewton 14 күн бұрын
No idea at this stage, but I will have to find out eventually
@hobie278 10 ай бұрын
Great video helps a lot. My question is what size SD card do i need to put in or do i need one? Thanks
@AndrewNewton 10 ай бұрын
Not required unless you want to record logs. Any microSD card
@hobie278 9 ай бұрын
Thanks for the reply. I have another question please. Will the Foxeer gps work I have the M10Q 250 with compass in it? And how do you setup the throws on the surfaces like Spektrum I mean like low medium and high rates. I will be using DJI goggles2 and DJI controller with caddix vista air unit. Thanks again.
@douglawton8186 4 ай бұрын
Great video! Is there an SBUS or CRSF receiver that is DSM2 or DSMX compatible? New to FPV and trying to make this flight controller work with my Spektrum radio. Thanks!!
@AndrewNewton 4 ай бұрын
I think you can use Spectrum serial receivers with INAV. Plug in to UART1 and choose SRXL2 in the receiver page. Actually it depends which Rx you use. Some (maybe satellite receivers) need 3.3V and plug in to the T1 pin. Check Painless360 videos
@P222RL Жыл бұрын
hi, thx for the video, I encounter some issues, I plugged a Frsky Sbus receiver, and enable UART2 and serial RX, but when I reboot it, the status is still not enable, please advice, thank you very much
@AndrewNewton Жыл бұрын
Soldering or binding problems maybe. Nothing else in INAV if you have followed the video.
@AK2I47 3 ай бұрын
5:15 you can use a (Micro SD to Micro SD Card Extension Cable Adapter Flexible Extender 15CM Black) so no problem with where the slot it
@AndrewNewton 3 ай бұрын
Good idea thanks
@andrehilgersom1707 8 ай бұрын
Andrew, great vid, but could you please try to get a servo working on port S8 in INAV. On my two boards that one gets skipped, even though the configurator shows them as configured ok. Cheers, Andre
@AndrewNewton 8 ай бұрын
That is a bug with the factory firmware. Update to INAV 6.1.1 to fix it.
@andrehilgersom1707 8 ай бұрын
Ah, indeed that solved it, thanks a lot Andrew ! @@AndrewNewton
@FardZ 11 ай бұрын
Can i connect the power from my ESC BEC to the board, not using the PDB to power the servos? I've used Pixhawk and always power it using the BEC from my ESC
@AndrewNewton 11 ай бұрын
No, not recommended. Would still have 2 competing power sources on the board
@9407zeek 5 ай бұрын
Great video Andrew!! But I have a question... do I have to flash Inav/ardupilot to be able to connect to it?
@AndrewNewton 5 ай бұрын
Comes with INAV 6 preloaded. You will need to use the configurator to set the board for your particular connections.
@9407zeek 5 ай бұрын
Thank you so much!! Is it the same for ardupilot?
@AndrewNewton 5 ай бұрын
@@9407zeek Yes you would need to flash Ardu onto the board, then use Mission Planner to set it up. You have to tell the board what and where you are connecting receivers and servos / motors
@9407zeek 5 ай бұрын
Really nice from you!! Appreciate it 👌
@brettbuchbach4692 11 ай бұрын
Hi Andrew enjoying all your content here. I purchased a speedybee f405 wing recently. Every time I connect a GPS the baro stops working not sure why cannot figure out the problem . Have tried inav and arduplane same problem everytime.
@AndrewNewton 11 ай бұрын
Very odd. Does your GPS have a baro that might be conflicting? SPL006-001 is the onboard baro. See what is recognised in the configurator
@brettbuchbach4692 11 ай бұрын
@@AndrewNewton actually I discovered I had a pin problem in the connector the was causing the issue. I am getting a little blind in my old age . Thanks for the advice . I am hoping to use it as my first arduplane. Loving your content Andrew very helpful and honest reviews. Thanks.
@AndrewNewton 10 ай бұрын
Well spotted. You're the second in a few days with tricky connectors causing strange issues.
@akustika20 Жыл бұрын
Hi, it possible to connect via softserial to use it via SmartPort as it is possible on Matek boards?
@AndrewNewton Жыл бұрын
Needs a firmware update. Link in the description.
@BullFrog96 7 ай бұрын
If I am using walksnail do I still plug into the same port as the DJI VTX? I have heard some you cant and some you can but I havent been able to find any documentation on that. Really new to FPV and digital systems.
@AndrewNewton 7 ай бұрын
Yes same port. It's just a UART connection with 9V power supply. But you need to check the plugs have the wires in the same slots
@BullFrog96 7 ай бұрын
@@AndrewNewton awesome. Thank you. New to this whole thing and trying to figuring everything out.
@davidlee50 8 ай бұрын
Not trying to be complicated but it would be nice if there was an online assistant that allowed you to supply setup information and the program would show you a wiring schematic of the supplied parts.
@AndrewNewton 8 ай бұрын
Might be a good task for AI.
@grifter77 10 ай бұрын
I'm thinking of using one of these to experiment with ardurover. Maybe not your main area of expertise, but do you have any thoughts about the suitability for that?
@AndrewNewton 10 ай бұрын
This board is built for Ardu...so it should be excellent
@markosdiytv9 8 ай бұрын
Hello Sir! New subscriber here I am amazed how well you are in this hobby, I always watches your how to videos, it really great that there are someone like you who are willing to share. As a matter of fact you inspire me to start this hobby. I already flown my ranger 2000, I ordered my first fc the speedybee f405 wing, sadly as I intalls the needed plugs and pins after powering using my 3s lipo I found out that my board beeps continously it seems not normal as I compare it to your videos. May I know what can I do? Or what is really happening is it normal? The boards heat up quickly after 5 seconds of powering via battery
@markosdiytv9 8 ай бұрын
Hope you see my comment thank you in advance
@AndrewNewton 8 ай бұрын
Thanks and I happy you are flying the Ranger. FC Heating up in 5sec is bad. I would guess there is a solder short or incorrect connection somewhere. Not sure about the beeping, I tend to turn it off until it's working OK
@gerardosky Жыл бұрын
Morning Mr. Newton. Looks like you were using a RX6R for this video, which is exactly what I have in mind. Just have a question about telemetry. I want to use the Yaapu Telemetry on my X9D+. Do I also have to connect the S.Port to a UART?
@AndrewNewton Жыл бұрын
Yes S.Port connection is required. But S.Port did not work with the first firmware for this board. Needs to be upgraded to INAV 6.1.1
@budnanc509 8 ай бұрын
Thanks for you outstanding instructional videos. Question a little off base, but can't find answers anywhere else. I have the EPW6 from Happymodel, trying to wire it onto Speedybee f405 v3 FC for a flying wing. I have the EPW3 bound to my TX16S, I have 1 motor wired up to the f405v3. But connecting the EPW3 to the FC got me spinning. I didn't think using the esc from the PDB would going to be this hard... I know Speedybee has a FC for a wing, Have them ordered, I say you use the mitek FC and thought I could go this way.... Hope I gave you a clear picture of what I am after... thanks again...AHC
@AndrewNewton 8 ай бұрын
EPW3 is just PWM as it comes, have you changed it to a serial output? Can the F405 V3 operate servos or just motors?
@user-ss9ym6wk8l 5 ай бұрын
I found a way to have the FC set the ARM command without requiring satellites. Set a rule in the MODES tab to set ARM when a selected servo is within the range specified. I picked a toggle switch on ch5. Then enable a logic condition to ALWAYS override arming safety. This is done in the tab that looks like a hollow gear. This was needed for my 03 air unit that stays in low xtr power until it receives an ARM conmand. It now switches out of low power based on the position of the ch 5 toggle switch, allowing you to go to low power when on the ground and only switching to high power when in the air. All without needing satellites and done thru the app.
@AndrewNewton 5 ай бұрын
Sounds good, although you are brave to override arming safety
@prateekshrestha9824 4 ай бұрын
Thank you for this video. I recently bought it and so far performs well. Do you have a link of where I can get the Mac OS version of the driver for Speedybee F405 Wing? I can find Windows (PC) version in Speedybee website but not Mac OS. So far, I have been using my crappy old PC and my iPhone app for INAV but would like to start using my Macbook Air for INAV.
@AndrewNewton 4 ай бұрын
I see you succeeded already (Facebook)
@lijath 11 ай бұрын
I use a dsmx transmitter will that work or do I need a separate receiver.
@AndrewNewton 11 ай бұрын
Need a receiver with serial output like SBUS or whatever Spektrum uses.
@damienaile Жыл бұрын
Great video Andrew. Have you been able to connect telemetry using frsky smart port?
@AndrewNewton Жыл бұрын
Yes eventually. SpeedyBee needed to tweak the firmware to enable SmartPort. Firmware links here - newtonairlines.blogspot.com/2023/05/speedybee-f405-wing-soft-serial-fix.html
@damienaile Жыл бұрын
Thanks Andrew. I assume i need to change the settings through cli. I am not sure of the correct commands. Any assistance is appreciated
@AndrewNewton Жыл бұрын
@@damienaile You need to flash the new softserial firmware on to the board, then follow this newtonairlines.blogspot.com/2023/05/smart-port-telemetry-inav-and-f4.html
@damienaile Жыл бұрын
Success. Thanks Andrew
@AndrewNewton Жыл бұрын
@@damienaile Brilliant
@johnpope4185 8 ай бұрын
great video helping out for the first time setting up FPV is there anywhere i can pm you for some extra help????
@AndrewNewton 8 ай бұрын
Thanks John. No PM but email or just ask here
@josha1491 Жыл бұрын
Great video, I will be referring back to this a lot in the coming weeks. I'm wondering if the 16 gauge wire you have in this setup can handle something like a 30-40 amp motor? I'm pretty new to this and my internet searches tell me that even 12 gauge can't handle the current... I'm obviously doing something wrong here so I'm wondering about any tips for wires for my F405 wing. Thanks
@AndrewNewton Жыл бұрын
I use 16 for everything but I rarely go above 20A, probably average 6 or 7A. Constant 40A would require thicker but 12 would be almost impossible to solder on to FC boards
@josha1491 Жыл бұрын
Would 16 handle a burst for takeoffs or emergencies? Would a 14 gauge also be too thick for soldering to a board? Otherwise, I’ll probably just do what you’ve done with 16. Thanks
@AndrewNewton Жыл бұрын
Yes 16 is more than enough for most models
@magnuscampus Ай бұрын
Hi Andrew, I hope all is well...I have a small problem..I don't understand where I have to connect the black and white cable of the esc...thanks for your help HI
@AndrewNewton Ай бұрын
Greetings. ESC plugs in to S1
@ledgerdc 7 ай бұрын
Do you know if this fc is compatible with spectrum dsmx receivers?
@AndrewNewton 7 ай бұрын
INAV supports Spektrum so the answer is yes.
@andriizakrevskyi597 Жыл бұрын
Hello, any plans to make VTOL video of wiring explanation? Thanks
@AndrewNewton Жыл бұрын
No I dont have any VTOL models
@YT-qp3xw 9 ай бұрын
Hello Andrew....great video...i just finished connecting all wiring on this fc for my dolphin but i need some input from you regarding irc tramp in inav 6.1.1....seems to me the tx800 speedybee vtx irc tramp to the fc doesn't work as it supposed to be ...do inav need vtxtable like Betaflight?
@AndrewNewton 9 ай бұрын
Tramp wire to TX5, turn on Tramp for UART5 in Ports. That's all I can suggest. No need for tables as for as I know but I dont have any tramp devices to test with.
@YT-qp3xw 9 ай бұрын
I tried other uarts too as Speedybee instructions via email to them but unsuccessful...same goes as smartaudio...well...i shall fly it by old ways..power up the vtx to max, connect it only after gps locked and ready for auto launch...wish me luck for my maiden on dolphin, sir😂
@AndrewNewton 9 ай бұрын
Just tested Smart Audio with an AKK Race Ranger VTx and it works on mine. T5 pin, enable in Ports
@varios1137 Жыл бұрын
Good morning, what Gps module, and what speed sensor are compatible with this controller, what other sensors could be installed? Thank you!
@AndrewNewton Жыл бұрын
I use BN880 GPS, Matek Air Speed Sensor is good. Dont need vario or baro.
@varios1137 Жыл бұрын
@@AndrewNewton thanks for reply, i will buy an a try to configure it, God bless you!
@GhostRyderFPV Жыл бұрын
Just finished installing mine in the _worlds ugliest plane,_ everything working as expected. I'm a little nervous about running 6 servos off it's internal servo BEC, but we'll see how she -crashes- flies! The Airloader in question has flaps 90% already installed, so what the heck I'll pop some 9g's in for sport. It's interesting how the LED on the USB extension board is mapped to LED 0, can't wait to hook up to the LED controller on the board and put it through it's paces, I'm assuming the four LED connectors are all parallel when you have it in FC control mode, but we'll see. The board was a breeze to install (crank up the amps when you solder to the ground power pads, boys), and compared to my fleet of Matek boards, this has only one feature I miss, a 2nd camera input. Another interesting aspect of this board, is the free UART 4, and how they call it "User" in the documentation: I'm not used to having a free UART, and it's high time to get my Caddx Peanut and SMO 4K remote controls to work! lol Thanks for the overview, Andrew!
@AndrewNewton Жыл бұрын
I have never set up FC controlled LEDs. Let me know how it goes.
@peterhancox5268 Жыл бұрын
Best of luck with 6 servos, watch for that magic smoke
@erikaditya4896 4 ай бұрын
How do you connect the FC to the 4in1 ESC? Sorry i'm new to this kind of hobby and want to make a quad, but accidentally bought a wing FC. Thanks
@AndrewNewton 4 ай бұрын
Doubt if it can be done. I would sell the FC to a plane flier and buy a quad version.
@rahadyanmuhammad271 6 ай бұрын
Hi, as I understand there is Speedybee F405 V3 Stacked that has a built in ESC 50A (normally used for Drone) Can we use that type for our RC Plane? Thanks~
@AndrewNewton 6 ай бұрын
No, there is nowhere to plug servos in unless you can reassign motor signal pads to work with servos.
@TheTuterTieuli 2 ай бұрын
do i need to solder those pin into the board? Because some of mine are loose.
@AndrewNewton 2 ай бұрын
Yes all pins need to be soldered
@birdmantelly007 9 ай бұрын
I am grateful for your easy to follow narration but I remain trapped with no screen representation of the receiver. I have built a second easy bee with exactly the same outcome. Hugely frustrating.
@AndrewNewton 9 ай бұрын
Which receiver and radio?
@birdmantelly007 9 ай бұрын
The Transmitter is FrSky Taranis 9, six years old, never missed a beat. The receiver Radio Master R88 (Sbus) 1 week old working well
@AndrewNewton 9 ай бұрын
Didn't I answer you 2 days ago?
@birdmantelly007 9 ай бұрын
The change to a REAL Sbus radio worked wonders in the second unit but made no change in the first. While it seemed that the two units had the same problem it is obvious that it has the same symptoms in Inav. Thanks so much for your input !!!
@revert2theStr8path 5 ай бұрын
Hi, So what would be the voltage going into the ESC and what would be the voltage going into the servos if the servo BEC is set to 6 volts for example? The servos get 6v input and the ESC gets whatever is the battery voltage? Or does the ESC also get servo BEC voltage which is 6 volts? Kindly clarify
@AndrewNewton 5 ай бұрын
ESC gets the battery voltage. Servos get 5, 6 or 7V from the servo BEC
@user-ss9ym6wk8l 5 ай бұрын
For the sbus example, you unplug the throttle lead from the receiver and connect it to the FC with the red wire removed. What is now powering the receiver?
@AndrewNewton 5 ай бұрын
I removed the red wire from the ESC cable and connected to S1, which is right next to the SBUS pins. SBUS receiver does require all 3 wires to be connected to the SBUS pins and is powered from the 5V BEC on the board.
@user-ss9ym6wk8l 5 ай бұрын
Got it thanks. One more q. I'm connecting my receiver thru sbus and am using channel 5 to send the arm command to an 03 air unit to force it out of low power mode (03 air units require the arm command to go full power transmit). I've set UART5 to DJI peripherals on PORTS page and ch5 slider bar moves correctly on RECEIVER page. I wrote a rule on MODES page to set ARM based on ch5 movement yet the 03 air stays in low power mode. Am I doing this correctly?
@AndrewNewton 5 ай бұрын
@@user-ss9ym6wk8l Need at least 6 sats acquired by GPS to Arm the board
@Xplicit_fpv 4 ай бұрын
Hi. I could realllllly use yer help. I have ths fc and a 03 air unit. Its all wired up. But icant get the air unit to talk to fc and move servos etc.. how do i set up for vid and receiver in ports etc... i hope u xan help ...im reall bummed i cant it flying.
@AndrewNewton 4 ай бұрын
Can't help with 03 setup. But otherwise it's all in the video.
@rexc3123 11 ай бұрын
I have a bunch of old recievers for my flysky i6,they are called fs-ia6,is there a way to use these recievers on the speedybee or do i need to order another type of reciever?
@AndrewNewton 11 ай бұрын
SB F405 W needs a receiver with iBus or SBUS serial output, like the FS-iA6b. Your old receivers will work with a ZOHD Kopilot FC
@rexc3123 11 ай бұрын
@@AndrewNewton thank you ,I will still use them in smaller models that can't fit large speed controllers and upgrade to a better rx, will the fs-a8s be best for this fc as it is minimal in size
@AndrewNewton 11 ай бұрын
Dont know the FS-A8S but looking at the specs it should work.
@birdmantelly007 9 ай бұрын
I have embarked on this adventure but I am currently stymied. In my connection to Inav 6 I have failed to achieve any communication from the Radio. I am running a Fr Sky Taranis 9 tx into a RadioMaster R88 rx, via an SBUS cable, out of the first group receiver pins (aileron), and into the far left SBUS connector, with white wire uppermost. This system works fine into a standard (no flight controller plane) I am using UART 2 for the receiver. But there is no response in the inav receiver display. I am not certain about the inav questions on the right hand side of the receiver page. Could I have missed some detail about the type of SBUS used ? I find it hard to believe that I have damaged the First line of the Ports chart. But maybe ! If I had what would I see ? Any thoughts would be most welcome. Maybe I have a Speedy Bee Dud
@AndrewNewton 9 ай бұрын
The R88 is just a PWM receiver, not SBUS. You would need the R86C
Drone Camps Experience
Рет қаралды 14 М.
Painless360
Рет қаралды 33 М.