This Almost NEVER Happens

This Almost NEVER Happens | HVAC Service

Рет қаралды 16,623

5 ай бұрын

-- Contractor Rewards --
www.contractorrewards.com/con...
- SUPPORT THE CHANNEL -
www.patreon.com/qualityhvacr?...
- Check out @TruTech Tools, LTD -
www.trutechtools.com (Use promo code “QUALITYHVAC” to save 8%)
- HVAC TACTICAL -
hvactactical.com/ (Use Promo Code "QUALITYHVAC" to save 10%)
- FOLLOW ME -
Instagram: @qualityhvacr
- BUSINESS INQUIRES -
qualityhvacrtn@gmail.com
- TOOLS I USE -
hilmor lineset cleaning kit:
trutechtools.com/hilmor-hlc00...
RLS Refrigerant Press Tool Kit:
www.trutechtools.com/klauke-1...
Veto Pro Pac MB5B Tool Bag:
trutechtools.com/veto-pro-pac...
Supco Jumper King:
trutechtools.com/supco-tfxjk-...
Fieldpiece Job Link HVACR Charge & Air Kit: www.trutechtools.com/JL3KH6?a...
Fieldpiece VP87 Vacuum Pump:
trutechtools.com/fieldpiece-v...
Fieldpiece MR45 Recovery Machine:
trutechtools.com/Fieldpiece-M...
Fieldpiece Hose Kit:
trutechtools.com/fieldpiece-h...
Fieldpiece SR47 Refrigerant Scale:
www.trutechtools.com/fieldpie...
Solderweld Brazing Kit:
trutechtools.com/HVAC-15-All-...
Fieldpiece SC480 Meter: www.trutechtools.com/Fieldpie...
Fieldpiece SC680 Meter: www.trutechtools.com/Fieldpie...
Fieldpiece SM380V Digital Manifold: www.trutechtools.com/Fieldpie...
Supco Magnetic Umbrella: www.trutechtools.com/Supco-Ma...
Supco Coolpressor:
trutechtools.com/Supco-CoolPr...
Supco Jumper King:
trutechtools.com/supco-tfxjk-...
Fieldpiece DR82 Leak Detector:
trutechtools.com/fieldpiece-d...
#qualityhvacr #hvac #heil

Пікірлер: 82

@jamespatrick9449 4 ай бұрын

I have actually ran into this problem quite often when I did residential.

@markcotter2355 4 ай бұрын

best kind of failure, stays on is better than wont start.

@HERITAGEWV 4 ай бұрын

:55 look how clean his setup is, almost never happens! Keep up the good work Josh! I too suffer from OCDHVAC!

@amirdjedovic5931 2 ай бұрын

Rescue motors are my go-to on older units if they're available. They are usually significantly cheaper than the OEM and fairly simple to install.

@subcoolHVAC 4 ай бұрын

Had the same problem with a Carrier x13 continuous run without inputs. Replaced with Evergreen x13 (2yr motor warranty) OEM (1yr warranty ) outside of factory warranty.

@user-su5ft8lc9q 4 ай бұрын

ECM MOTORS ARE NOT THE BESTEST, JUST HIGH PRICES IN THE NAME OF EFFICIENCY. CAIN'T BEAT A PSC MOTOR.

@zahedaminullah6934 4 ай бұрын

Psc all the way!

@zahedaminullah6934 4 ай бұрын

Everything made now a days is honestly garbage, nothing lasts! Everything made of paper now a days!

@1PooNGooN3 4 ай бұрын

You can replace an ECM with a PSC motor, that's what I would do. Cheaper part and will last way longer. Otherwise, why wouldn't he just replace the control module on this bad ECM motor because obviously the motor is still good, it's running just fine.

@zahedaminullah6934 4 ай бұрын

@@1PooNGooN3 ecm has nothing but problems, i replaced more ECM motors than a PSC believe it or not

@christopherbrantner3948 4 ай бұрын

I am an HVAC/R wholesaler and I find this video quite helpful. Thank you sir.

@ryanfries6237 4 ай бұрын

Thanks for All you do Brother!

@HVAC1116 2 ай бұрын

I get these often, I have yet to take one apart to see what failed but would really like to!

@AaronPowellvox 4 ай бұрын

8:21 the part that almost never happens. Great video bro!

@IslandbreezeMechanical 4 ай бұрын

Change a ton of those in ICP/Carrier here for the same issue. They are now just giving us universal replacement motors.

@zahedaminullah6934 4 ай бұрын

Good job, looking forward to your next vid!

@daygoingward918 4 ай бұрын

Drip leg is looking great 🤙🏻love the videos keep up the great content !

@toekneeee 4 ай бұрын

Uncommon? I see this happen pretty frequently with the ecm motors

@HVACRTECH-83 4 ай бұрын

I don't see that issue ever.

@bmunson76 4 ай бұрын

He’s referring to the warranty being close to running out

@dylanwood7810 4 ай бұрын

I love how on these service call videos, he does what an AAR of the troubleshooting he did, in order, and what he found (AAR is After Action Report for you non military/non veteran people)

@John-bx6ed 4 ай бұрын

All you had to do is add a standard traditional fan relay and break the black high volt common wire at the high volt side of relay and then blue and green to the control side of the relay - ✅

@OcRefrig 4 ай бұрын

Yea, only problem with doing that. Is if u make the customer a fix that works & makes them comfortable some people say - hey just leave it like that. I’m fine I want to save some money. You have to be careful who you do that with. If Your sure they are the kind of customer that wants it fixed correctly & are grateful for a hold over fix. Then u can do that kind of stuff. Unfortunately a lot of People more often than not will say the temp. Fix is good enough & u open another can of worms. especially when the motor quits out of warranty. & trying to explain that the motor will eventually fail open & then they are back to square 1 WITHOUT a warranty & big bill.

@John-bx6ed 4 ай бұрын

That fix works. Never had to go back.The only thing that will take it out is a grunting no go on the ECM motor itself which is how most fail anyway

@zekenzy6486 4 ай бұрын

Great Video. Thank you for sharing

@briancarlisi2224 4 ай бұрын

FYZ…. Stock 1 Evergreen VS motor, 1 Evergreen VS user interface & 1 Genteq 16-4 pin adapter & you will always be able to handle a failed ECM on the spot. This is manufactured by Regal Rexnord which has a distribution center up the road from you in Nashville. All components available from United or Supply House for approximately $500.

@drodriguez394 4 ай бұрын

I tend to agree with your thought process on the motor. I have found if the signal for the speed drops out the motor will run the last cal received. The scenario I had was someone wired in a wet switch breaking the transformer on a climate master. It got wet did just that and the fan ran indefinitely until I shut the units high voltage off and turned it back on

@robalexander7348 4 ай бұрын

Zac, I look forward to the final repair 👍 Au

@QualityHVACR 4 ай бұрын

Stay tuned! 😊

@denverjbaker 4 ай бұрын

I dont think ive ever ran into that one before. Its always the opposite.. wont come on at all. Good work man! 👏🏼

@QualityHVACR 4 ай бұрын

Thx brother!

@mikhailtronik4322 4 ай бұрын

This almost always happens. I swapped 2 motors with this issue just recently

@QualityHVACR 4 ай бұрын

I was referring to the under warranty timing.

@edorofish 4 ай бұрын

I had the same problem on my air handler. Turned out to be a bad relay. Easy fix.

@michaelnash8435 4 ай бұрын

That definitely wasn't a relay issue.

@zeph352 4 ай бұрын

And it is true that normally one does not carry a stock of variable speed motors due to the cost and sometimes considering the expression of the client when he lets us know his budget, sometimes one helps him by changing it for a standard motor, especially if the unit is many years old.

@EllisBrewer-zw4yd 4 ай бұрын

Dont be a hater bro. You have your opinion on his content and thats fine, but keep it to yourself and appreciate it. Met this guy coming out of chick fil a with his family he's actually pretty cool.

@vincentgrueter7759 4 ай бұрын

I ran into this on a day and night(carrier style) as well. Ecm units should have surge protectors. Those. Modules are very sensitive

@Beans413 4 ай бұрын

Where did you get the tool bag?

@joecoolusa 4 ай бұрын

Tu sonrisa atrae al público a ver Disney World en vivo

@QualityHVACR 4 ай бұрын

😂

@kurtiscring1550 4 ай бұрын

What’s common is often very subjective ECM motors are just flat fragile

@StebbyGreene 4 ай бұрын

Any possibilities of a shop tour vid

@QualityHVACR 4 ай бұрын

Coming soon! 🤫

@HVACRTECH-83 4 ай бұрын

You can replace the modules on alot of those motors but at least in my area no one stocks them anyway lol. My area sucks for supply houses. We have a webb but ours doesn't stock shit for motors of really any kind

@smith-mundtnews1406 4 ай бұрын

A lot of manufacturers are doing away with the modules along. You have to buy new motor module combo that is all in one.

@HVACRTECH-83 4 ай бұрын

@@smith-mundtnews1406 I'm still able to order them so far. Havnt heard of this, why would they do such a thing

@themrmoy40 4 ай бұрын

don't you have a Johnstone supply house? and most of those motors you can't replace this and that, you need a new one.

@HVACRTECH-83 4 ай бұрын

@@themrmoy40 no

@johnd4348 4 ай бұрын

They are no longer supply houses, they are order houses. You have to order every part.

@Josh-px6xb 4 ай бұрын

The compressor panels on Tranes and carrier style packaged equipment suck . Idk if anyone else feels the same. I almost have to fight most of them to go back in and line up the screw holes.

@waheedbashir1220 4 ай бұрын

Thanks sir 🎉 from Pakistan 🇵🇰

@johnd4348 4 ай бұрын

blower is running all the time wont shut off. Customer has fan set to on position at T stat. Then gets upset when you explain this and refuses to pay for the call.

@cjones6776 4 ай бұрын

Mars 10861. Or 10868

@revivalist116 4 ай бұрын

Couldn’t you just add a peanut relay? Breaking the high voltage. Honest question

@arodandjeter1 4 ай бұрын

This happens more than “almost never”😂

@rolytech212 4 ай бұрын

When are you going to wrap your van with logos?

@QualityHVACR 4 ай бұрын

Don’t plan on it.

@bmunson76 4 ай бұрын

I said to myself “it’s a module” in the first 10 seconds of the video.

@carlyleworkman1928 4 ай бұрын

👍🏿

@kurtiscring1550 4 ай бұрын

ECM motors are not a scam…..but almost

@QualityHVACR 4 ай бұрын

I see what you did there…🫠

@benjamindyer7348 4 ай бұрын

The click bait is a getting a little out of hand, not hating because I like your videos and your work. Just a little click baity lately

@AaronPowellvox 4 ай бұрын

8:10 not clickbait

@QualityHVACR 4 ай бұрын

I understand where you are coming from, but the title is referencing the in warranty timing.

@Chris-ru3ri 4 ай бұрын

I’ve had a ton of modules go bad, but normally the motor won’t run. So the title fits

@jesrovalenzuela1346 4 ай бұрын

How is that click bait ?

@tobyG59 4 ай бұрын

Cry about it

@johnd4348 4 ай бұрын

Never underestimate the manufactures ability to make a crappy design making service techs job 10 times more difficult

@joebyron9 4 ай бұрын

That drip leg is too short

@knockitofff 4 ай бұрын

Rule #1: Impact guns are NOT to be used as screw guns

@QualityHVACR 4 ай бұрын

It’s all in the technique 🥴