This BUDGET Foxbody Upgrade Is EASY, CHEAP AND EFFECTIVE! Junkyard Finds!

Рет қаралды 26,460

2 жыл бұрын

#brakes #brembo #sn95spindles
SMASH LIKE, SUBSCRIBE AND BELL FOR NOTIFICATIONS OF NEW VIDEOS!
You HAVE To check this out! THis is a proven and well sought after upgrade for the front BRAKES system of your foxbody mustang. With the Use of specific cheap high class donor vehicle parts you can stop on the dime! ENjoy! (THis is part 1 of 2 parts). Brembo brakes UPgrade for cheap? WHat!?
SUPPORT THE CHANNEL! teespring.com/stores/neomustangs
JOIN NEOMUSTANGS MEMBERSHIP CLUB!
/ @neomustangs
INSTAGRAM: neomustangs
TWITTER: / neomustangs
FACEBOOK PAGE: / neomustangs.restoration
EMAIL: MYBUSINESS01@HOTMAIL.COM.
#neomustangs #mustang #foxbody #projectcar #streetcar #vortech #on3performance #dragracing #stickshift #turbo #supercharged #stockbottomend
PLAYLISTS:
TECH CORNER PLAYLIST: kzfaq.info?list...
PROJECT HOTWHEELS: kzfaq.info?list...
BLACK CAR: kzfaq.info?list...
GRUDGE NIGHT RACING: kzfaq.info?list...
DADS CAR: kzfaq.info?list...

Пікірлер: 122

@tracyamcneal9597 10 ай бұрын

You the man Dannie...Putting it out there for us guys that need a little extra in understanding a cost effective way to approach these upgrades. Thanks again

@elmostong1865 2 жыл бұрын

Great info Dan, thanks for this. Budget brake stuff is something some of the other channel's don't focus on.

@Neomustangs 2 жыл бұрын

You bet

@lochnessfox3441 2 жыл бұрын

Great info I did not know!!! Thank you!! See ya Sunday

@SophiaAphrodite 2 жыл бұрын

" They play nice with your rack". Not the first time I have heard that.

@Neomustangs 2 жыл бұрын

Spindles 94-95 better for rack vs 96+

@johnmilner5485 2 жыл бұрын

Sweet . putting together a 88 lx for my boy and been looking for a cost effective solution . Appreciate you Dan.

@Neomustangs 2 жыл бұрын

Right on!

@garycarr9112 2 жыл бұрын

Always good info when it comes to Neo

@Neomustangs 2 жыл бұрын

Always! TY

@gregoryjowers3629 2 жыл бұрын

Dang that was a surprise about Cadillac brakes fitting the 94 spindles

@pnw_pharmer3990 2 жыл бұрын

Gonna order this setup brotha. Thanks to you. 💯

@skyler13827 2 жыл бұрын

Only adjust the top hole on the spindle! I did this ats swap and modified both holes to the correct bolt pattern and the caliper rubbed on my 03 terminator wheels on my 85’ stand. I ended up welding and re drilling the bottom hole on a mill.

@mindandbodymuscle5345 2 жыл бұрын

Thank you for making this video. My last comment on your live stream show was regarding my next mod on my 95 Gt "Brembos". The Gt500 breaks also fit with the 95 spindles (if I remember correctly, it's pricey) Regarding the Brembos: a 17" rim on the car is a must, and I also believe there is an offset bushing that has to be machined to get better contact surface between the break and it's disc. 👍 On the Brembo upgrade video tho.

@jamesdevereux8717 2 жыл бұрын

Looking forward to seeing the install video on the front calipers!

@Neomustangs 2 жыл бұрын

Coming soon!

@6spd85notch 2 жыл бұрын

Killer deal for a little bit of work. I’ve laid into my caddy brakes pretty hard and zero fade or anything. Haven’t touched them since I set them up.

@Neomustangs 2 жыл бұрын

Nice !

@elementl1166 2 жыл бұрын

I’ve been around fox body’s and done all the mods you can think of for past nearly 30 years and never saw those calipers. Sounds like a solid upgrade for very fair money. I did the cobra pbr calipers front and rear years ago on my ‘93 Cobra. They work great too.

@Neomustangs 2 жыл бұрын

Ya my white turbo car has pbr and cobra brakes on it. Stops very well 140+ Still

@brucebell7623 Жыл бұрын

Do you have the link to pbr cobra calibers and are they direct fit to 94-95 spindles?/ thanks

@out_foxed_gt 2 жыл бұрын

Awesome video!!👊🏻

@Neomustangs 2 жыл бұрын

Thanks! 👍

@automotiveaddiction428 2 жыл бұрын

The Joy's of stick shift..I haven't really used my breaks in the 5 years I've owned my car...my break stuff is still like new...although I think mabe I should do an upgraded break system.over the winter..I have a big list of stuff that needs to be done.

@toddcoello6461 Жыл бұрын

I had a 89 hatchback with a Paxton novi 2000. It did 10.32@131 with stock brakes. Yes it was an adventure lol. I have a stock 88 gt convert. Now i might start building a little. The 89 is long gone.

@turboman351w3 2 жыл бұрын

OK I REALLY WANT TO SEE THE INSTALL VIDEO AND EVERYTHING YOU HAD TO DO TO MAKE THIS KIT WORK, THIS LOOKS LIKE A REAL GOOD CHEAP UPGRADE.

@Neomustangs 2 жыл бұрын

WE will get to it i promise!

@5PointSlow 2 жыл бұрын

@@Neomustangs did you ever get the install video up? I looked around on your channel and couldn't find it but I may have passed it over.

@ddaniels750 Жыл бұрын

Rock auto also sells the 03-04 Mach 1/Cobra calipers & rotors which bolt up directly to the SN95 spindles without modification.

@Neomustangs Жыл бұрын

Brembos about same price and better

@brokentoolgarage8609 2 жыл бұрын

Those are some big brakes!

@frank3stangs 2 жыл бұрын

Nice video! I got my brembo's from rockauto for about $120 each. I have 99 mustang gt spindles. Got the 99' cobra's 13" rotor's from rockauto also cheap!! Have not installed yet but, coming soon!

@Neomustangs 2 жыл бұрын

Right ! I can’t believe i overlooked this

@LynnTwinCustoms513 2 жыл бұрын

good upgrade for the cheap on 4 piston calipers !

@Neomustangs 2 жыл бұрын

For sure !

@jayjay9224 2 жыл бұрын

What's the Callahan rotor part number. Great video. Thanks for sharing.

@Neomustangs 2 жыл бұрын

I’ll Have to look I’ll be revisiting this topic very soon.

@thepretender4640 2 жыл бұрын

Thanks NEO great vid and awesome information on brakes, I learn something all the time from your vids. BTW I have most of the parts for the coyote swap now, few small pieces left. Hows your schedule looking this fall and winter?

@Neomustangs 2 жыл бұрын

We should be ok I think.?

@BrailsfordsRides 2 жыл бұрын

Exactly what I need to do, right now I have a turd of a flat tappet 5.0 motor the previous owner swapped into an 85 3.8 car. I plan to buy a roller cam motor to build for some power

@Neomustangs 2 жыл бұрын

Nice!

@mistersecret88 Жыл бұрын

Imagine if someone just made new sn95 spindles. Sell like hotcackes!!

@cesar101387 2 жыл бұрын

Interesting! Make more videos of the installation please

@Neomustangs 2 жыл бұрын

Ya only 2 parts to this. Intro and install one side

@andrescuevas728 2 жыл бұрын

S&s engineering makes inserts for the calipers so you don't have to drill your spindles.

@harleydavidson4017 2 жыл бұрын

Looking forward to the tkx review

@joey4872 2 жыл бұрын

No need for brakes, just keep it floored 🤪😅🤣😂 Cool brake info Vid bro

@Neomustangs 2 жыл бұрын

Haha 😂

@baylymiley Жыл бұрын

Now my question is how would these big calipers fair with a manual brake master cylinder? I'm getting ready to pull my motor, clean up my engine and considering getting rid of the brake booster.

@jakejohnson3523 2 жыл бұрын

Ooommggg you just saved me a ton of money right now no BS

@Neomustangs 2 жыл бұрын

Nice! Some really good write ups here on the tube about these brakes. Check them out. Ill be installing my own version soon.

@jakejohnson3523 2 жыл бұрын

@@Neomustangs hey how much HP can I squeeze out of 42lb injectors

@Neomustangs 2 жыл бұрын

@@jakejohnson3523 rule of thumb 500 max. Wheel. I have done it half a dozen times

@jakejohnson3523 2 жыл бұрын

@@Neomustangs thanks man your like the dictionary for me

@moej6014 2 жыл бұрын

Is the 94-95 spindle necessary if you use lowering springs? Not having the notch lowers the tie rod end. Lowering the car raises the tie rod end. This "roughly" balances out. Is my thinking correct or is there something else I'm missing?

@cbr1krr371 2 ай бұрын

I know this is an old video but did you have any fitment issues with the front wheels that you have? I want the same rims…

@dwestinghouse 2 жыл бұрын

Dan! Glad your covering this. I did this upgrade last year. Hope you consider doing the offset bushing vs drilling the spindles. Not sure what you think but I prefer not to remove meat from a structural member even if it's minor. Looking forward to your install. Keep up the content.

@brucebell7623 Жыл бұрын

Offset bushings??

@brucebell7623 Жыл бұрын

Off set bushings??

@DragginNuts1 2 жыл бұрын

Very resourceful NEO! Question, are these FLOATING calipers or do you have to get them dead center on the rotor for best results?

@Neomustangs 2 жыл бұрын

Gotta center them. I know I have to shave a small slot in them for that. Just off center a tad

@BruceLee-xn3nn 2 жыл бұрын

My chevelle with 2002 Camaro disc brakes, the front brake calipers look exactly like the factory sn95 front calipers. Planning to swap spindles on my fox soon and see if Camaro calipers bolt to sn95 spindles.

@Neomustangs 2 жыл бұрын

Well caddy brakes are GM if I’m not mistaken

@foxbodyinnovations-fbi3927 2 жыл бұрын

Dan , Your content is great ! Really helping me. I have a few questions. if you wouldn’t mind answering , how can i contact you ? Mike

@bobbyyenke1598 2 жыл бұрын

Great intro

@Neomustangs 2 жыл бұрын

@jrusted5.031 2 жыл бұрын

Bad ass, brake caliper upgrade. Cadillac gotta go though. Red paint from autozone and some decals and you are styling bro!

@Neomustangs 2 жыл бұрын

Ya haven’t figured out what I want to put in that spot yet.

@jrusted5.031 2 жыл бұрын

Brembo (?)

@brezicky 2 жыл бұрын

Take a look at s&s engineering on Facebook they make some brembo swap stuff that may help out

@visco_ties3875 Жыл бұрын

Could you send me the link for the brake calipers? Please

@richdemarco2906 2 жыл бұрын

Hey Dan - I'm doing the same upgrade on my notch. Any idea of what wheel would fit with those calipers? I'd like to do a set of SVE NVX wheels but not sure about the clearance

@Neomustangs 2 жыл бұрын

Should fit

@korbynwalshdrums8766 Ай бұрын

I have an 89 convertible that is completely stock. I don't plan on running serious power but I do want looks. Can you put SN95 wheels on the rear drum brakes as long as you put a 5 lug axel? Asking since that's what it looks like you did. Thanks!

@Neomustangs Ай бұрын

You can put any 5 lug ford wheel on once you swap axles. These axles are 9" ends Moser aftermarkets

@horsepoweraddict7199 2 жыл бұрын

Can you make me a parts list with #. To do the front. I already have the 94 front spindle “. So need pads. Cadillac caliper, and rotors part or part number. Thanks Neo

@Neomustangs 2 жыл бұрын

It’s in the video I already did…

@mattharbaugh9138 2 жыл бұрын

I have the 95 spindles on my fox and Im looking to do this swap. I didn't hear you mention what year and size the new rotors where??? Are they the 13" cobra rotors? Please advise.

@Neomustangs 2 жыл бұрын

Ya just cobra rotors

@ilierizquierdo7870 Жыл бұрын

What chip for A9L you recommend?

@Neomustangs Жыл бұрын

Custom tune from a dyno shop.

@doomsday2002 2 жыл бұрын

Have you ever tested the Maximum Motorsports Brake Upgrade Kit?

@Neomustangs 2 жыл бұрын

I have not no.

@joey4872 2 жыл бұрын

I run the MM kit on my 89. Excellent update. High speed stopping power has little to no heat fade.

@doomsday2002 2 жыл бұрын

@@joey4872 great! Thanks for the insight. That's exactly what I wanted to know.

@tyjaebowie933 Жыл бұрын

Will the 99 -04 spindle work

@Neomustangs Жыл бұрын

Yes

@twinturbotony93 2 жыл бұрын

S&s engineering has a kit to install these calipers without having to drill out the spindles.

@Neomustangs 2 жыл бұрын

Ya I seen it

@twinturbotony93 2 жыл бұрын

Cool. I'm putting this setup on my new edge. I plan on doing it to my fox too.

@jacksonm9127 Жыл бұрын

Dan would this brembo brake set up be the equivalent to an 03/04 cobra front brakes or would it be a little better thanks for any help

@Neomustangs Жыл бұрын

Better

@jacksonm9127 Жыл бұрын

Hey man I have the 03 cobra brakes front and rear would there be any point in going with the brembos on the front?

@StLMikie 2 жыл бұрын

About what RPM are you generally trying to launch at Dano?

@Neomustangs 2 жыл бұрын

4500 ish

@nissanbrown6144 2 жыл бұрын

I paid 280for my brembo 6pixton calipers from 2018mustang gt

@jpp9846 2 жыл бұрын

I'm surprised SVE or someone, hasn't reproduced the 94-95 spindles. Good video, if you're pushing some H.P. you need to update.

@Neomustangs 2 жыл бұрын

Ya for sure. I’m sure it’s been talked about

@woundedfox5109 2 жыл бұрын

Ya gotta be able to stop

@matthewkoenig5133 Жыл бұрын

Can u send a parts list cuz I have a 95 I want to upgrade like that

@Neomustangs Жыл бұрын

It’s pretty self explanatory in the video. I think I talked about all the parts ?

@matthewkoenig5133 Жыл бұрын

@@Neomustangs it's the coolest thing I seen

@kyle47015 8 ай бұрын

Did these Cadillac calipers end up working or was the idea scrapped?

@Neomustangs 8 ай бұрын

They work just fine, just never installed them. Theres other channels that have.

@kyle47015 8 ай бұрын

Thanks for the reply. I'm interested in trying the swap at some point.

@benrobinson9136 2 жыл бұрын

There’s a company that sells the adapters so you don’t have to drill anything

@Neomustangs 2 жыл бұрын

Yep

@stevefox4885 2 жыл бұрын

Do you take customers cars? I would love to have some work done.

@Neomustangs 2 жыл бұрын

Depends on work.

@stevefox4885 2 жыл бұрын

@@Neomustangs brake and suspension maybe exhaust?

@sweetassugar2076 2 жыл бұрын

Hey Dan is it possible to use the 95 96 spindle and still keep it 4 lug do they even offer a wheel bearing ? Digging the into by the way lol 😂 your car is going to stop on a dime and give you 2 cents change bro 😎

@Neomustangs 2 жыл бұрын

That’s interesting. You’d have to modify the hub and rotor but anything is possible. With these kinda brakes you’d have to stay 17” on front

@GearHead704 2 жыл бұрын

Honestly I think brake and suspension should be addressed first but I'm just like everyone else more POWAH! 😁

@mindandbodymuscle5345 2 жыл бұрын

+1. Your stuff is great aswell. Have you decided how many cubic inches your going to yet? Your last video (I believe) was left on a cliffhanger, perhaps building momentum for the next video.

@GearHead704 2 жыл бұрын

@@mindandbodymuscle5345 Thanks. Actually that's an older one. Ended up going with a 347

@TractorTech 2 жыл бұрын

The Cadillac calipers messes up the brake bias. I was going to do the upgrade myself but Jack from Maximum Motorsports advised me not to. They look cool but the car will stop worse.

@Neomustangs 2 жыл бұрын

Ima try it out. Can’t be any harder to stop than I have. I can always go back ya know. Gonna try the S&S kit ?

@mattlivaudais5062 Жыл бұрын

Repair Geek has a video about this as well. Swapping to the Taurus rear brake calipers will put that bias back to stock(or close enough)