Tinman, you may be learning, but you are also a great teacher. Thank you. I'm 63 years old and am enjoying learning as you teach. Stay safe and enjoy life.

Gotta love the sound of a pine wood campfire / popcorn in a microwave idle. Of that saw. Literally releases endorphins or serotonin or whatever. Takes you to a happy peaceful place

That saw rips, looks like a perfect reliable work saw ;) just a little tip to help you out: If you put some sawdust between the two wedges when doubling up, it stops them from drifting apart when you hit them :)

I like his tips on piston quenching. Very cool.Been a fan of you both for years.

Hi everyone hope everyone is having a blessed Friday

Great running work saw! The 372 platform is hard to beat for a reliable easy to work on saw.

Sounds great. I wish I had an Ironhorse saw. Cheers

Nice video great build ironhorse

Harvey can build a beauty !!

Great saw from Mr. Harvey

The best saw ever made ever,

I love your new baby wedge, LOL! Actually perfect for trees of that size. That saw sounds great.

I’ve watched yourself, Harvey, and Hooper. All of you are Top Shelf in my book. Keep up the great content We all enjoy you all!

Love the sound of good running saw. Thanks Stay safe

Thanks for all your doing. ⚙️🚲⚙️💥💨💨💨

That 372 runs great! Thanks for the video!

All of the trees you dropped landed straight, cuts looks good. Like you said you apply your good habits.

Sure seems like a pretty darn perfect 372! Thank you for sharing!

Lovely work saw.

We love what you you do Tinman. I never miss a single video. They make my day.

Another masterpiece from the ironhorse that is impressive that he didn't do any exhaust porting very snappy love the videos keep up the cutting

Great video Tinman. Harvey sure builds a great saw doesn't he.

Stay warm an safe an keep up the great video's! What a saw!

Tinman your the best, explain everything just like we were standing next to you. 👍👍😎. Awesome channel fun to watch it grow. So glad Harvey sent me over when you were getting started. 😁😎 Pat from nw Wisconsin

Hey man. I love your videos. I am convinced that you are one of the best sources of information on these old saws available on the internet.

You inspired me to mess around porting my own saws, great video tinman 🤟

Look at this prairie faller back cut firstin it ‘ nice work

Hey Tinman, I love how trees two, three and four did a little bounce then slid up right beside number one! Well done. Doesn’t matter if your dutchman isn’t perfect on the first pass as long as you clean it up to where you want before felling it.

That Ironhorse Saw Is The Bomb And a Real Runner and Working Saw 😀😊😊😀 Tinman 😮😀

Ah yes good old Manitoba spruce and pine, saw's get a lot of run time liming around here know it well. I burn through as much if not more gas and bar oil just trimming than I do bucking but that's what we have here so you make the best of it. Anyways thanks for sharing your time with everyone, take care.

Purdy good runin saw buddy have a good weekend.

Very brave Tinman, we can all watch these pro fallers and learn their techniques, but we don't have the practice, doesn't matter, as long as we put their safety lessons first and foremost, be humble, you did well !

Great video man. Dude I love that pick up you got that's just a good setup you got.

Nice saw, going to have to build an Ironhorse pipe for my saw. TC Mahalo Tinman 🤙🤙🤙

Crazy hot saw!!!!

Harvey knows his stuff, and I would be enclined to say that getting a saw from him is almost like a "gift from God". Cheers

That dog will hunt . Harvey is one cool guy

Hey tinman. Hope you are well. You mentioned bouncing off the rev limiter. I would have thought this build would have an unlimited coil. What does it have? What’s your thoughts on rev limiters on saws in the 65-75cc range? I’ve been trying to find an unlimited coil for my 391 that I am working on. It’s limited to 13k but I think it would happily run a few more RPM than that after the port job. I would just tune it by ear in the wood and have a burble at WOT when I lift up. Do you usually do unlimited coils in your builds? Thanks tinman.

Hey Tinman, Just the transfers with no porting... WOW Very interesting indeed. Keep the Awesome content coming Tinman.

Nice saw I love to run my saws , cuttimg tree's and bucking up for fire wood

Hey tinman love your videos and the question of the day I always pay attention never know what you could learn. Hope all is well. Picked up a 372xp will be going back through you vids carefully

Nice cutting Tinman ✊🏻🇦🇺that saw sounds and cuts awesome. Your giving me flashbacks of a guy called Billy RaySmith. Luv ya buddy✊🏻🇦🇺great to see you cutting Tinman …

The sound of that saw 4 stroking is the nastiest, most beautiful thing.

Nice saw.....Hairy trees

HEY tinman ,your doing great ,you are getting them on the deck ,and it looks pretty safe ,and the saw is just awesome ,peace an love stuart.

Holy cow that saw is just transfer work with no exhaust or intake timing from iron horse?? Dang she’s a ripper for sure. Makes a fella wonder… thanks tinman for another awesome vid. See you on the next one

a mans, man right here

I got a Homelite logger saw from the 1970's.... you wanna talk about waking the dead...I can feel the ground rumbling when I set it down. And I got neighbors too.

Man, DOES THAT EVER SOUND GOOD!!!

a saw anyone would be proud to have

I was watching Ironhorse build one. He's building a sleeper for Buckin Billy.

Man I'd love to load up a pile a my saws and come visit

Loud is great, does it still meet US forestry spark arrestor mandates?

It has been "IRONHORSED"! 👍

A tin man question for you buddy I'm just learning how to adjust chainsaw carburetors the question I have for you is I got my saw to run but when I first started in the morning it will not fire up without me holding the trigger and giving it some throttle should I adjust the high or low and which way should I turn it in or bring it out the high or low also could have just be that I need to adjust the idle thank you so much God bless

yeh baby live an learn .peace an love ,send it to ripsaw.

Hey Tinman! Are you still just running 87octane with opti 2 in all yer saws?

nice video saw sounds great i hope you dragged those trees out of the water before bucking he he

If there was no port grinding what are the build specs?

What makes this saw sound so bad ass?!?

WILL PULL A 32” NO PROB?

How do I remove a piston from the cylinder? If mouse urine was in there I’ve tried BB blaster acetone, tranny fluid still no luck.

Can you port my saw? I just want to hang it on my living room wall. Thanks from Beverly Hills. Can you sign it?

Have you ever hopped up a 346xp?

hello tinman I am probably one of your oldest viewers but love your videos I am 90 years young and I still work on chainsaws I have a Mccullough timberbear and the cylinder on the exaust side is a v grove in the roof of exhaust port about 3.16 wide and goes on up into the inside of the cylinder and tapers to a point about 3/4 inch do you have any comment on that I am pretty sure all timberbear have this and so does 610 exhausts opens sooner and slower

😎👍

When are you gonna get to a Partner 5000 Plus?

I wish y'all would keep your Canadian geese up on your side of the border I got mauled by one as a teenager swimming in a pond and they shit every where cool saw love it

I think anyone wld be happy to own that saw. Ik I wld

50 decibels in total

im fine with the tinman show the way it is growing but never show boating its my kinda stuff 👍❤🌳😜

The likes dont work on this vid. Whats up utube?

o machado e a motosserra (the axe and the chainsaw) eli silva & zé goiano composição: moacir dos santos / zé goiano o machado e a motosserra tiveram uma discussão motosserra diz que é orgulho da evolução machado pra mim já era pois vem do tempo de adão você agora só serve pra fazer calo na mão motosserra dá um ronco relou o dente no tronco já se vê o pau no chão a serra chamou o machado pra fazer uma porfia machado aceitou na hora e quando chegou o dia entraram junto no mato pra mostrar a serventia a motosserra roncava machado velho tinia e naquele matagal foi só cavaco de pau pó de serra que subia e esse grande duelo deste jeito é que termina na briga das ferramentas o machado é que domina motosserra parou cedo ali no tronco da quina machado seguiu cortando mata grossa e mata fina motosserra impotente rebentou sua corrente acabou a gasolina que isto sirva de exemplo para toda humanidade e você que é tão jovem tem que saber a verdade respeite bem os mais velhos não brinque com sua idade uma pessoa idosa também tem utilidade é um diamante valioso se não tivesse o idoso não teria mocidade

Not wearing cutting chaps? Awe man, thats not too wise.

All you 372 husky guys. Its time to switch to a Echo 7310 hot rod... longer stroke more torque better filtration no auto tune, more ccs and cheaper to maintain....

I got to say this video is the first time iv ever seen anyone run powersaw in yoga pants!! Lol

Hi Tinman yes super great saw 372 XP I purchase this saw because Buck’in recommended that saw Was is favourites best one ❤✊✊✊🪵🪓