This ROBUS GOLF LED Bulkhead Surprised Me

Рет қаралды 8,758

Күн бұрын

Bulkhead lights are one of the mainstays of the electrical installation world, but with familiarity comes... well... familiarity!
And so it can be tough to get excited about them when one lands on your desk to review. However the Robus Golf Express has some really clever features to help make installing a breeze and your life as an electrician much easier.
Joe Robinson reviews and installs the Robus Golf Express demonstrating all its versatility and adaptability.
Learn more about the Robus Golf Express 👉 hub.efixx.co.uk/robus-golf-exp...
================================
Time Stamps ⏱
00:00 Joe lets you in on an eFIXX Secret!
00:35 One of the quickest fittings to install - here's why
01:47 The correct way to mount the fitting
02:17 Connecting up the conductors
02:50 Variations of the fitting
03:15 Changing the setting of the sensor
04:17 Settings on the LED control unit
05:22 A lot of thought has gone into the individual LEDs
06:08 Installing the lid and making it tamper-proof
06:50 Colour and trim options
07:03 Joe loves this bulkhead
================================
📹 Presented by
Joe Robinson - Technical Editor
#ledlighting #lightinginstallation #electricalinstallation

Пікірлер: 49

@sergiofernandez3725 2 ай бұрын

Nice bit of kit. Robus are onto a winner

@chrissharpe2106 Ай бұрын

I install almost exclusively robus golfs for bulkheads and this looks like a winner to me. Only manufacturer I’ve found that doesn’t like to use a different screw for every part meaning I don’t need 12 screwdrivers just to take the bloody thing apart.

@AndrewLumsden 2 ай бұрын

👍👌 Precisely what my church hall has been looking for, for underneath it's entrance canopy! Thanks.

@andyrutherford203 2 ай бұрын

All the other light manufactures should aim for this. NOT use the smallest screws known to man and needing 3 hands to hold it all in place when stood on a ladder in the cold

@efixx 2 ай бұрын

Brilliant isn't it? 😃

@chrisfs150 2 ай бұрын

You just need to man up. Or go be a plumber for goodness sake. 😂

@TheChipmunk2008 2 ай бұрын

Also, (again for other manufacturers) STOP INCLUDING PHILIPS SCREWS, we use pozidriv here...

@johnmilla358 Ай бұрын

Ksr 333 and the saxby 95542 are very similar. This one though seems to be built with the installer in mind more so over the others on offer

@Mike_5 2 ай бұрын

The fold up design of the LED PCB is a first for sure especially when you are attempting to install it on an external roof space like a porch

@AndrewStrydomBRP 2 ай бұрын

Definitely not a first, I've installed a couple of bulkheads that are like this, albeit with screws instead of a clip.

@efixx 2 ай бұрын

Clever isn't it? 😃

@Mike_5 2 ай бұрын

@@efixx definitely designed to make the install easy

@professionalineverything 2 ай бұрын

The merrytek microwave sensor, don't make it too sensitive as it will detect your neighbours movements (don't ask how I know.)

@TheChipmunk2008 2 ай бұрын

Yep, can see through stud walls/doors .... and also sensitive to wet vegetation unlike a PIR... (when the sensor is used outdoors)

@professionalineverything 2 ай бұрын

@@TheChipmunk2008 can it trigger if I put it in the microwave.

@efixx 2 ай бұрын

Sounds like an interesting back story here... 🤔😂

@professionalineverything 2 ай бұрын

@@efixx I didn't change the sensitivity as it works as a sensor light so if you walk up to the door the lights inside the home come on, no floods needed.

@Dog-whisperer7494 2 ай бұрын

Nice 👍

@leodavis5886 2 ай бұрын

These have been around for ages

@HeathenGeek 2 ай бұрын

Are there any rules / guidance recommending these should be installed facing downwards, not outwards from a wall? Asking because I've seen these used to replace the old rectangular fluorescent bulkheads in stairwells and these are blinding when fitted on a wall compared to what was there.

@TheChipmunk2008 2 ай бұрын

1:44, minor pedantry: not an end box, a through box ;)

@efixx 2 ай бұрын

Always appreciate minor pedantry! 😃

@ChrisWright7701 2 ай бұрын

Is there a maximum number of lights that can be controlled on the switched output?

@TheChipmunk2008 2 ай бұрын

Almost certainly but good question :)

@deang5622 2 ай бұрын

Manufacturer says on their website the maximum load is 400 Watts which is 20 standard luminaries.

@efixx 2 ай бұрын

Thanks Dean. 👍

@AndrewLumsden 2 ай бұрын

What is the refresh time? When it has been triggered, then goes off, how soon can it be triggered again? If someone walks under it while it is still on, does the time reset to the beginning of the selected duration?

@efixx 2 ай бұрын

I believe it can be retriggered straight away and will count down from the last movement detected. 🤔

@TheChipmunk2008 Ай бұрын

@@efixx Yes that is the behaviour of those Merrytek sensors, similar to PIRs

@paulasser1589 2 ай бұрын

What’s the IP rating or did I miss it ?

@ThangiahGopal-iy2hg 2 ай бұрын

சிறப்பு👍

@efixx 2 ай бұрын

Thank you!

@HeathenGeek 2 ай бұрын

6:09 Hmm. . . looks like you could drill a hole in the lid and use it as a dust catcher when drilling out downlights 🙄

@Xenon777_ 2 ай бұрын

Change the colour when it's on 😏

@efixx 2 ай бұрын

Such a rebel! 😂

@TheChipmunk2008 2 ай бұрын

Grary>>> LOL

@efixx 2 ай бұрын

😂 Bit of a running joke at events that Gary's name is spelt wrong on badges and such, no idea how it keeps happening... 🤣

@edc1569 Ай бұрын

4000k 15W and they should last a long time

@brotheradam 2 ай бұрын

shame it not available in 120v for this side of the pond

@efixx 2 ай бұрын

Start lobbying Robus! 😃

@gadgetman36 2 ай бұрын

4:42 It's 4000K that's Natural or Neutral White, not 3000K which is Warm White.

@deang5622 2 ай бұрын

Actually it is not. Natural white is daylight on a sunny summer's day which is around 6000 Kelvin. Some manufacturers might call that cool white, but that 6000 or 6500 is the standard temperature for daylight balanced photographic film which gives natural accurate colour rendition. It's up to each light manufacturer to name their colour temperature. Fluorescent tubes which are sold as daylight balanced are typically between 5000 and 6500 Kelvin.

@MVCuk 2 ай бұрын

Why ROBUS copy KOSNIC so much ???

@deang5622 2 ай бұрын

Because they don't have patents and therefore Robust can legally do it?

@blow0me Ай бұрын

And are all internal items, including the led array readily available for spare parts to repair when it goes faulty ? You know, to be environmentally friendly ?

@blow0me Ай бұрын

pity as well that most wall lights, led's especially, most light shines perpendicular to the wall, straight out....not so much to the ground. So light pollution always worse