I'd be impressed if it wasn't timelapse.

That's a sweet sounding 250!! You really paid attention to the detail I admire that.

lol, I was not expecting that last part about sponsors not getting back to you that was classic!!!!

Just came across this build video. Super practical, top-to-bottom build. Very impressive and satisfying to watch!

So awesome dude! I thought I was a badass putting an 18 inch wheel and a bigger tank on my yz😏 makes me want to start tearing down!

Great build video...a lot of the same upgrades I put on my YZ. Love my Flexxbars!

The time spent polishing everything out for that new finish was awesome. Great build

I think that's one of the most satisfying videos I've ever watched! Thanks!! I'm sure it does great in the woods too!!

I have a yz250 too love it so much power I had a 125 quad like your past video so relate able

came out killer, congrats man looks awesome!!!!

The way you secure the crankshaft to install the clutch basket is extremelly clever!! Nice bike!!

Wow that was awesome, very mechanically talented and what a nice bike build.

Fascinating! Wished had your skills! 👍🏻👏🏻🙌🏻

My 1999 kx250 came with a clarke 3.3 gallon tank and I love it

Wow bro… sick build! Also good music choices. Loved every song 👍

It is always such a pleasure to watch. I wish it was so quick an easy.

Good job, thanks ! Greetings from Poland

Incredible vry smooth job ending wid vry healthy rich stroke feels d best

you are a Wizard! absolutely unbelievable! well done! ty for the vid

You're one of the few likable dirt bike guys in KZfaq land. Thanks again and thanks for your responses to my questions. Oh and great video!

Sweet build. I have an 01 yz250 with 2005 yz250 front forks, flywheel weight, fmf gnarly pipe, and some other goodies that make it a trail monster. The yz 250's are by far the easiest Japanese 2 strokes to turn into woods/enduro bikes.

Absolutely love this bike

best work!!! looks amazing.

Awesome build brother! Digging your channel 🤘🏻

Awesome content! I really enjoyed watching this video. I think you should do another YZ250 build. And make sure you hold onto the new one!!

Great job, thanks to share!

Great build. Very nice

Great work fellow throttle jokey!!

Inprecionante what you do. Chingo

MASTER Artisan!!!!

Well Done!

Aye nice build, Found you by looking up swing arm removal as mine is seized. Also live right down in pueblo working on my 2013 yz250. Appreciate the info i got from it.

Righteous! Sick sick sick! Love it man! Excellent video! Love the fake out at the end, haha! \m/

YAMAHA 💙! you are to be congratulated 👏

DUDE!. awesome build video! love it.

That was awesome...props to you.

Amazing work.

Coolest video I've seen in a while. Sweat bike.

Awesome!!!!

Awesome skills bro! salute!

would be cool to see a list of what was done. Did you change the fork springs, use 2.5wt oil, etc

Love it! I want to refurbish my 07 rmz250f.

thats a dream build. nice dude

Cool video! Nice build.

Such a cool build! Now let the battle scars commence

Excellent man. Saludos desde Santa Marta. Colombia

That was fascinating. If that was a “woods bike” build, I think my mostly stock DRZ will stay whatever it currently is out of the box. “Woods bike” looks hard 😅.

If it were only that fast in real life. You had me cracking up with that ending!

Sweet restoration 👍🏿👍🏿

Sick build 👌 keep it up!!

Such a beatyfull bike 2 stroke excelent quality job

Turned out nice ! I had a ‘99 fully rebuilt it it was fast, quicker than my ‘03 CR 250

that was AMAZING

Satisfying 😍

Very cool.

Wow nice work. Subscribed.

Sweet build.

Inspirational

Bro the quality of these vids deserves the same views that rocky mountain gets.

Great video

That would be my dream job. I am smashing that like button!

Awesome build. I was hoping you would keep polishing on that pipe :D Try a polish called simichrome out on the next one! Anyway, subscribed!

Your bike looks amazing cuate

Nice channel! I'm rebuilding a '92 yz250 for trails and this is definitely helpful

Perfect...

Your awesome. I'm stoked. I'm thinking hard on buying a new 250x when the shop opens back up (virus)and keeping my current bike for my homies that want to ride with me.

Serviço de restauração top

Nice! How's everything holding up after 2 years on the polishing, etc?

Dude sick build! What year is it? I rebuilt a 2000 yz250, not near as much detail as you put into it, but i did all the motor work. I didn’t love it for trail riding, so i sold it and bought my KTM 300. Oh and also, I’m super jealous of your engine stand. I just wrestle with them on the work bench LOL And your garage is too clean haha

Glad to see you're back, that was a sweet build, love the ending. What did you like about the Flex bars? I've been looking at them just can't pull the trigger on the cost, at 50 years my shoulder and wrist joints need all the lovin they can get.

Хорошая работа.

Anyone that I reached out to that didn't get back to me? lmao... Great job on the build

2:25 You don't show it for long, but that damage to the piston on the exhaust side (crown edge wear above the top ring, and maybe even the upper ring groove getting wider.), is due to not letting the water warm up enough before taking off for the ride. The bike is running rich stock, and that takes longer for the water to warm up. Don't be impatient when warming up your bike. The tops of the radiators should be pretty hot to the touch. Warm enough to be uncomfortably hot with no gloves on.

good job 👍 tood

Hi there, from Portugal, congratulations for this bike 👍 The plastics is what year?

Nice

Very cool! May I suggest maybe heating up the cases in an oven so that they expand uniformly to insert the bearings. I'd be too worried about the propane torch causing warping. What type of material did you bolt onto the glide plate at the bottom?

Wow very very nice work. Better than new. Meticulous attention to detail. Are you a motorcycle mechanic by trade? Thanks for sharing.

What type of wheel are you using on the bench grinder for polishing?

how long have you been repairing 1 unit of yz125 motor

Super super impressive good work man

Dang what is that song in the beginning because I like it

Hi. How much were the rim and spokes

Did you change the oil in those forks and rear shock? Thinner oil is better for woods. I use PJ1 2.5 weight.

Ive been thinking about doing this same build, but I think im just gonna find a nice used 250X and go play!

Молодец чувак, привет из Москвы

Amazing job - was great to watch! Just curious what type of buffing wheel you used on the exhaust?

How are those TUSK rims holding up? Is the Lectron worth it and did you try a JD kit or anything else before the Lectron? Those bars look nice and tall.

Looks like an amazing job but how do you build a YZ 250 Woods bike without adding a flywheel weight.

Hi mate........great video! it was very useful for me. If you are reading this...........what is the exact description(name)of your swing arm bearing removal tool....

Good Job I would like to know about how much you spent to bring the YZ to that point? And by the way a new subscriber writes you

Im going to get my 2017 yz450f and put that engine to ltr,and going to put 250 yamaha 2 stroke into 450

Nice work! Where did you get that engine stand? I need to buy or make one!

Did you make that engine stand or did you buy it .... that's pretty rad I could have used that a few times info on that stand ?

hey dude. i was wondering if you give us the link on what parts did you put in the bike i just bought a run down 05 yz250 and this pushed to upgrade it to next level hope for your reply.

What gears did you install? 250x or wr? 1-5 or just certain ones?

Really cool to watch the build but we didn't really get to see the Bike at the end of the video?

Great build brother!!

I’ve wanted to do this so many times, but I’m overly intimidated to try it... I wish I had the knowledge as I have a lot of trails in northern Utah...

Hi if possible do you have a link to the crank pulling tool you used thanks 👍