It comes with a eye cup also it doesn’t illuminate at all to be honest

Yes. Detection depends on the model of your sight which is displayed on the ATN website when selecting your device.

No sir it's a thermal only scope

No this scope does not have the option to adjust for windage and elevation. You are able to re-zero again if you don't like your initial zero.

ATN Corp. will this scope be easy to zero and hold a zero on a crossbow?

@@MrShark0890 Yes this scope will be perfect for a crossbow setup. Lightweight and easy to zero.

Twist the thing in the front

Possibly but you would not get a good quality video out of that. Take a look at our Thor 4 thermal scope. It has video recording capabilities.

@@AtncorpOptics ok I will have a look. Thanks👍

Hello Sir. The ThOR LT does not get firmware updates like our other Smart HD scopes.

Why would you need a mil dot reticle for something like this? It’s not like you’re gonna be shooting past 150 yards with this scope.

@@fishtopher8379 Because I generally zero at 40 yards and use the mildots as hold over and hold under at known ranges

And I use this with a .30 Caliber pcp air rifle,ballistics are far different then that of a traditional firearm

@@AtncorpOptics have a question Did I lose my warranty if i duracoat my scope?

Not with the Thor LT. Only the X-Sight 4K Pro and Thor 4.

It can be used in the daylight but you will still see a thermal image.

No Sir, this scope does not have video recording capabilities. You can look at our ThOR 4 line for a scope with video recording and much more: www.atncorp.com/thermal-scope-thor-4-384-1-25-5x

Off

Can you please send an email to gsmith@atncorp.com describing the issue. He can help troubleshoot this with you.

Please send an email to gsmith@atncorp.com with a good contact number and our CS team will reach out.

Same here, we're you able to get it resolved?

@@greggriffin5887 yes. After the third one they replaced for me I got a refund. They all broke in less than thirty rounds on my AR. Bought pulsar scopes AND the ultimate cheap sleeper thermal is the AGM TS19. It beats the brakes off the THOR LT

@@craesh1001 copy that thanks

Did you ever get an answer ? I am in same boat pos

@@roryschweitzer7921 Sent mine back to them. They sent me a new one that works fine.

I've got same problem

I don't think this is what you're looking for.

The crosshairs will stay where ever your zero is. It will not go back to the center. If your zero is so far off center you need to remount the scope and try to level it as much as possible. Then re-zero.

@@AtncorpOptics i have two other atn scopes and they are not doing this i moved them to this same gun and zeroed had no problems with them only this thermal does it could this one be defective

@@david42554 Please contact our CS team at gsmith@atncorp.com, they can help with this issue.

You can not save settings for different weapons.

The ThOR LT does not have that kind of capability. Our ThOR 4 model does. You would be able to save up to 6 different rifle profiles.

You can write down the coordinate points for each gun from right side of the zero setting menu.

It won't be perfectly centered. You need to remount and maybe use a boresight to zero in the scope. This may help get the reticle more centered.

francesco roggia I think he meant remount the scope itself because even though you may think it’s level it probably isn’t... I had to do this with my Thor LT... the more precise your mount is the more accurate your first shot will be.... meaning very small adjustments to height and cant of the scope.

have you ben able to fix your scope mine has done the same thing i sight it in and then when i go to shoot it after its zeroed its back to the lower right corner

@@david42554 I actually returned that scope and got the x-sight scope with digital night vision and a Pulsar Axion thermal monocular. I don’t have the same problem with my current scope even though it zeros the exact same way. I did find I was doing it backwards at some point but i’m not sure if that was my problem. Fyi, I like my current set up but really wish I still had a thermal weapon sight. It’s hard to find animals in the scope even if I have plenty of light in it.

Up button. A short press of this button will cycle you through your change in zoom (3-6x or 4-8x) Take a look at the Thor LT manual manual.atncorp.com/thor-lt/#idmain-operations

it's already available

Buy it...

No, this scope does not.

@@AtncorpOptics.. Ok.. Thank you..

This pretty much just gets your foot in the door as far thermal scopes,its basically like gen 1 night vision of thermal in my experience so far

You'll be pleased with it if you're a beginner or hunt at ranges like myself 200yds and in... I have nothing bad to say about it other than I wish it would tell you how much charge it had to go before full when on the charger... I promise you this coyotes will hate your damn guts as well as any other predators that you are trying to eliminate efficiently and you'll smile everytime you look through it... How's that for why don't go and buy one? You only live once. Like Mister Strait says, "I've never seen a hearse with a luggage rack."

No, the Thor LT does not have those features.

Sir, can you please send an email to gsmith@atncorp.com with a good contact number and our CS team will reach out. Thank you.

It is already available with our resellers.

Buy one...

thermalimagingcamerareviews.com/atn-thor-lt-thermal-scope-review/?fbclid=IwAR01-EO0EYR2LGh9jIrA08zO0tCfPQUvsBFIjeRlLxboPZwxGu-clf6dSMg

ATN Corp. That’s your review.We want real reviews.

@@fathertimencUSA That is a real review. It was done by Thermal Imaging Reviews. They review various thermal imaging devices for different applications.