Installing Flush Mount Trailer Anchors Tie Down Hooks

Рет қаралды 194,510

5 жыл бұрын

Installing Flush Mount Trailer Anchors Tie Down Hooks
Installing Flush Mount Trailer Anchors
Installing Flush Mount D-rings
Product Link: amzn.to/2YVAeiX
Pit Posse Recessed Pan D Ring and Washer Kit (4pk)
✅ Kit includes 4 recessed pan ring plates, 4 backing plates (1/8 inch steel oversized) , and 4 hardware sets made up of 16 carriage bolts, 16 lock washers and 16 nuts.
✅ Made of heavy-duty steel with a breaking point of 6,000 lbs
✅ Simple installation allows you to secure your belongings in minutes
✅ Keeps your motorcycle from tipping over and your gear from moving around
✅ When not in use the D-rings lay flat in their pockets without getting in the way
Pit Posse brings you the perfect solution for tying down your gear!
Our set of 4 recessed flush pan D rings are designed to make the process of strapping down your dirt bike and gear easy and convenient.
No need to improvise and hope your gear will survive the ride, be reassured and relaxed with our long term solution.
Install the D ring fixed anchor point in your truck trailer, utility trailer, RV, SUV and keep tool bags, gear and equipment from sliding around while riding.
Set of 4
Trailer Ring
Our Best Anchor Rings Yet
Haul your heaviest cargo with up To 6,000 maximum breaking strength ranking.
corrosion resistant material
zinc plated steel
Lifetime usage
We Thought About All The Details
Utilize your space wisely
We included the hardware needed to easily install the D-Rings in your trailer!
Reliable & Durable, Always.
4 over sized backing plates
4 recessed pan ring plates
16 carriage bolts
16 lock washers
16 nuts
Tie Down Anchor
Anchor
Hardware
Low Profile
The low profile design makes these recessed flush pan D rings safer. When the rings are not in use, they lay flat in their pockets without getting in the way, allowing you to load and unload your gear safely.
Strong & Durable
Made from high-quality corrosion resistant material and zinc plated steel with a rating of 6,000 maximum breaking strength. These rings will not bend or rust and have the endurance to hold down the heaviest cargo.
Hardware Included
Kit includes 4 recessed pan ring plates, 4 backing plates (1/8 inch steel oversized) , and 4 hardware sets made up of 16 carriage bolts, 16 lock washers and 16 nuts. Have everything you need for quick and easy installation.
Hauling cargo
Focus on The Things You Love
Whether you're going out on the trail, or transporting precious cargo, leave it to Pit Posse's D-rings to keep your belongings secure.
Pit Posse
Our Story
Pit Posse was founded back in 2001 with the goal to provide the best tools and trailer accessories at the best value. Today, Pit Posse’s comprehensive product line includes garage-shop supplies, transporting, chemicals, hardware, bike stands and ramps.
We strive to give you the best products and the best service possible! We will do everything we can to make sure your experience with us is memorable.
Thanks for watching! Please like, comment and subscribe.
Video Produced by Thrifty Garage (Please Subscribe!)
/ thriftygarage
Find us on Facebook (Share!)
/ thrifty-garage-1571631...
Connect on Instagram (DM me!)
/ thrifty_garage
As Always, Thanks for Watching!
- TG (Thrifty Garage)
Business Inquiries:
2401 E. 32nd Street, 10-248
Joplin, MO 64804-3177
thriftygarage@gmail.com
#tiedown #trailer #tiedownhooks
flush mount tie down hooks,flush mount tie down,flush mount tie downs,tie down anchors,d-ring tie down,d-ring trailer floor anchor,flush mount tie down rings,flush mount tie down anchors,trailer tie-down anchors,trailer tie down anchors,Installing Flush Mount Trailer Anchors,flush mount trailer anchors,truck tie-down anchors,e track tie down system,d-ring,tie-down cleats and rings,trailer hitches,TG,ThriftyGarage
tie down anchors,flush mount tie down hooks,flush mount tie down anchors,tie-down anchor,tie down anchor,flush mount tie down rings,d-ring trailer floor anchor,tie-down anchors,flush mount tie down,trailer tie down,flush mount tie downs,flush mount trailer anchors,Installing Flush Mount Trailer Anchors,tie-down cleats and rings,trailer tie-down anchors,trailer tie down anchors,d-ring tie down,truck tie-down anchors,d-ring,e track tie down system,tg,trailers
enclosed trailer setup ideas,e track installation enclosed trailer,e track installation,e track

Пікірлер: 78

@DanielWStyles 4 жыл бұрын

Nice, clear, precise, tutorial on installation of D-rings. Thank You !

@ThriftyGarage 4 жыл бұрын

Your welcome! Thanks for the positive input.

@charpero65 Ай бұрын

This video was extremely helpful. I installed six D-rings in my cargo trailer this morning and your video gave me a huge head start. The tip about putting something heavy on the top side was super useful.Thank you.

@ThriftyGarage Ай бұрын

Glad it helped!

@MikeDQB 11 ай бұрын

I drill part way through from the top, then part way through from the bottom. Gives me a clean edge on both sides.

@leeackerson2579 3 жыл бұрын

You got the tie down right the second time. Crossing the straps like yachts are roped gives a better hold down and protection against shifting. Thanks for the video.

@buckan8r999 4 жыл бұрын

One of the items that I purchased was the shockstrap, which prevents straps from becoming disengaged during travel. Regular straps, the vibration can loosen straps, but with shockstraps, they don't. Thanks for the video. I have e-track on the sides and wanted to avoid putting them on the floor mainly because they would get gummed up with mulch when filling. I thought about using the ones you demonstrated in the video.

@ThriftyGarage 4 жыл бұрын

Love my ShockStraps! Especially the overbuilt military grade ones.

@eightyfivefingers 4 жыл бұрын

Drill from top to bottom half way, then bottom to top and you'll get no splintering on either side.

@brianshanahan3878 4 жыл бұрын

Excellent video and GREAT work on the video editing! Short, concise, clear with great camera angles! Keep up the great work bud.

@ThriftyGarage 4 жыл бұрын

Thanks Brian!

@biteandsip 3 жыл бұрын

Super helpful. Thank you 🙏

@ThriftyGarage 3 жыл бұрын

Awesome! Glad to help.

@louisbringhurst1299 4 жыл бұрын

Great info

@tonyalways7174 3 жыл бұрын

Thanks for sharing from UK 👍🏻🍻

@ThriftyGarage 3 жыл бұрын

Absolutely! Thanks for watching!

@freedomfighter2911 4 жыл бұрын

Thank you ....great vid

@ThriftyGarage 4 жыл бұрын

Thanks for watching!

@Pbaglio21 2 жыл бұрын

Definitely helped brother, thanks for the video!

@ThriftyGarage 2 жыл бұрын

Absolutely, thanks for watching!

@ronstum9095 4 жыл бұрын

You can buy the d-rings through Northern Tools stamped with the 2000/6000

@JT_70 2 жыл бұрын

I added them to each corner of my utility trailer which has 2”x6” floor boards. I wanted them flush with the boards so I routed out the shape of the upper plate. It was a pain because I did not want cut a hole completely thru the boards as you had done.

@ThriftyGarage 2 жыл бұрын

Sounds like a nice clean install!

@MrBIGTEE504 7 ай бұрын

Great job as we all know sometimes we learn as we go over all great job thanks for the video liked and a new subscriber

@willr612 4 жыл бұрын

Drill top to bottom, starting with smaller drill bit and stepping up to final size.

@ThriftyGarage 4 жыл бұрын

Thanks Will!

@JP1970 4 жыл бұрын

Excellent video! Liked and subbed--thanks!

@ThriftyGarage 4 жыл бұрын

Thanks for watching!

@CooterScooters 4 жыл бұрын

You need a separate strap on each corner. The way you had the single strap run through the eye of your anchor point allowed the strap to slide.

@ThriftyGarage 4 жыл бұрын

No issues with the Shock Strap. One in front and one in back.

@drabun1959 3 жыл бұрын

Good video I sprayed the bottom of trailer with Rhino liner it went on smooth with no exposed metal or wood

@ThriftyGarage 3 жыл бұрын

That’s a great idea!

@andrewbratos6907 4 жыл бұрын

try a Brad point drill bit ( wood only )

@arisafghanzada 5 ай бұрын

Nice tutorial! Suggest taping the plywood with masking tape to help minimize/eliminate splintering.

@ThriftyGarage 5 ай бұрын

Great tip!

@kcirmusic1 4 жыл бұрын

I just purchased an Aluma MC10 aluminum trailer to haul my 2011 HD Road King. The trailer has tie downs but they're located out on the perimeter of the bed. Your trailer has a wood floor... Do you see any problem installing these flush mounted anchors in an aluminum floor? Thanks for a good video.

@ThriftyGarage 4 жыл бұрын

It would depend on the thickness of the Aluminum but I would guess aluminum to be stronger. I would suggest installing near frame supports as I did as well as possibly adding additional brackets or support to ensure it doesn't pull the floor up or the anchor from it's mount. I'd highly recommend ShockStraps as well for your application.

@Jay_Hall 3 жыл бұрын

Rick,,get a quality front wheel drive in wheel chock! Then use tie downs,,bike will go no where.

@rodneymiracle3224 3 жыл бұрын

How did you know what size hole to drill

@ronhorton21 3 жыл бұрын

If you use the hole saw from the bottom until the drill bit goes through and then go from the top down you won't have splintering.

@ThriftyGarage 3 жыл бұрын

Great idea!

@human1513 Жыл бұрын

Those lockwashers with the spurs, points on them will break over time. I cut off the extra bolt length or get shorter carriage bolts. Then I cover it all with undercoating on the bottom.

@timd7947 4 жыл бұрын

what did you use for the undercoating of your trailer? Thanks!

@ThriftyGarage 4 жыл бұрын

I'm pretty sure it's just black paint. It's whatever they did at the factory.

@MikeDQB 2 жыл бұрын

What track system / mounts do you have on the wall for those trimmers? I just got a new enclosed trailer and I'm trying to get it set up ;). I'm so used to an open trailer.

@ThriftyGarage 2 жыл бұрын

Check out the 2020 Solo Lawn Care Setup video. I have several videos on the e-track.

@rodolfoplasencia9739 Жыл бұрын

Whenever you can, try to tight down to straight points forward and backwards using 4 straps or chains. If you do it this way, if you lose one point, one strap or one chain, your tighten down will not move or be lost. If you tight down any other way, your vehicle, load, equipment will swing, slide, move if you lose a strap. Always tight down forward as straight as possible or parallel, like if you were drawing 4 lines like making an H and the center of the H (-) is your equipment, vehicle or load, and the (l l of the H are the 4 straps, going each from a corner point towards the front or back, as straight as possible. This is the best way of strapping. For your zero turn, have the straps ready to be hooked to the zt, and tight them. Don't sacrifize safety and security for speed, or you'll waste more time and resources.

@ronstum9095 4 жыл бұрын

One other thing..the D-Rings from Northern Tools comes with all the hardware. I also bought FLEX spray to seal the bottom.

@ThriftyGarage 4 жыл бұрын

Flex spray for an undercoating is a great idea!

@SteveZ-yd6em Жыл бұрын

Do you think this is stronger than bolting the e track trough the steel frame? And using rings e track clip on’s?

@ThriftyGarage Жыл бұрын

I would think bolting to the metal frame would be stronger.

@MarkDulisse 2 жыл бұрын

Need to do same on snowmobile trailer. Problem is that in winter, water freezes inside anchor tie down, and impossible to use.

@ThriftyGarage 2 жыл бұрын

That sounds problematic! I’d probably drill out the center so it had a larger drain hole. Snow might still get packed in it though.

@istvanmeissler2238 4 жыл бұрын

How much was the set of four tie-downs? Thanks. Good video.

@ThriftyGarage 4 жыл бұрын

Current price is $32.95 for a set of four. I left a link in the description.

@vicpetrishak1077 2 жыл бұрын

The backing plate needs to be fabricated longer with 4 more mounting holes and eliminate the large bore hole . This backing plate needs to be bolted through a X-member or welded to .

@motodrummer 3 жыл бұрын

3:30 bolt holes seem dangerously close to the 3-1/2" hole? seems like they should make them a little further away.

@ThriftyGarage 3 жыл бұрын

So far they have held up well.

@TheMausymaus 4 жыл бұрын

How did you secure the wood down to the trailer frame? I want to do it as securely as possible

@ThriftyGarage 4 жыл бұрын

The wood is secured with self tapping screws. However, I did not do this, rather the trailer builder performed that install.

@jayragoonanan2598 3 жыл бұрын

Putting down making tape 1st helps with tearing the wood

@ThriftyGarage 3 жыл бұрын

Thanks for the tip!

@GoatZilla Жыл бұрын

Why don't you guys lay down a big sheet of kydex on top of the wood to serve as the floor?

@scottdahlen8006 2 жыл бұрын

A better and quicker strapping method is using one short strap that hooks to the center front and a second that hooks to the center rear of the mower.

@ThriftyGarage 2 жыл бұрын

Sam, after some adjustments I now use one strap in the front and one in the rear. Unfortunately the machine doesn't have a good central tie down point, plus the ratchet strap length would be too short so I hook it up in a V shape to the machine.

@jeffstieren4474 Жыл бұрын

Your straps came loose because you anchored them to your front wheel castors. Anchor them to the solid frame since there is no suspension and it won’t go anywhere.

@benny8300 11 ай бұрын

Did it come with the bottom plate ?

@ThriftyGarage 11 ай бұрын

Yes

@ilovesunoco 4 жыл бұрын

Ratchet straps will stay taught trash your old ones.

@ThriftyGarage 4 жыл бұрын

Another issue is that there is not a good place to secure the hook on the mower. I'm using the large loops on the Shock Strap ratchet straps and they are working great!