I put a Thuren trackbar on my 08 in 2010. I have over 317k on it. Just recently I had an issue where my truck felt "drunk"…..i replaced the long tierod with oem and it felt different , but sitl "drunk"……I had a trusted friend steer my truck left and right while I was lying under the truck watching the track bar. The axle end had a very small amount of play in it. I just ordered another heim joinr end from Thuren. I realize just now that this is exactly the way my original track bar problem felt. Can’t wait to get my new heim joint installed……to sum it all up…..That Thuren track bar has handled close to 300k miles of abuse and its only gonna cost me $58 bucks to make it like new again.

Best move I made was getting rid of rough country and getting my Thuren Fab setup

Don going straight to the point and not over technical as always. The knowledge and time put into all of these products is awesome.

Couldn’t be happier with the thuren suspension I have on my rig.

I bought a kit from a buddy with the Thuren/King remote residence shocks, 2.75" front springs 1" rear springs, sway bar, track bar, and supporting little bits. The quality of this track bar in person is amazing. Pictures hardly due it justice!

Don is the man. I just took delivery of a 2021 Ram 2500 Cummins Limited and I will be checking his product line out for a front end level… I have eyes on the soft ride 2” coils, Fox shocks, steering stabilizer, and of course the track bar. 🤘🏻

If you people want the real thing ....This dude has it . Thuren knows his stuff like no one else.

KZfaq searched myself and found this - was not disappointed!

Awesome Video Mr. Don! Very much appreciated that you are doing this now!

Very nice Trackbar !

Excellent information Don!

Good tech info as per always from this guy. Didn't leave any stones unturned here. 👍

Great video! Awesome product! This was a great mod! Always great service with Thuren guys!!

Just got mine, and it’s going on this weekend 👍🏻

Great Vid, will be doing the rear 1st in my 2019. This will be next!

Thanks for the video! Good info.

Some nice information Don.

Ordered a trackbar and sway bar today! Can’t wait

Just ordered mine for my 05 3rd gen! Be here on Tuesday! I'm ready for better handling !!

Thanks for sharing, I only found about your products not long ago while trying do diagnosis the terrible steering characteristics of my 2011 Ram. I found your artical on wheel alignments which drastically improved the drivabily and with a little more fine turning should be great. I and I'm sure others would love to see a video explaining the wheel alignments. Thanks again for sharing your knowledge.

Great video and really helps explain the geometry and engineering reasons of how your product is beneficial compared to OEM. Thanks for posting this.

best suspension out there.....period!

Hey Don, can you do a detailed video on the front sway and one of it in action?

I just ordered the rear bar for my 2020. I hope it improves the poor handling!

Just added my EMF upper and lower BJ’s, ordering my Thuren track bar next. I use my trucks for Hotshot, so we beat the piss outta them everyday. I’m hoping to gain some control back. Great video

Replace this and only this on my 2015 and stopped my DW. Thanks guys.

I purchased and installed the 3" coils, shocks, control arms and track bar. My local shop was changing my oil and showed me my worn front end. The track bar showed "slop" in it. When I installed it, I used the measurement from the instructions. What could cause this "slop" that they showed me? Any help/suggestions would be appreciated Thuren Fabrication Inc. Thanks

will it clear aev differential covers? 2020 power wagon.

Just ordered a thuren trackbar for my 2012 dodge diesel. I have a leveling kit and the stock trackbar bushings are worn out every year resulting in the dreaded death wobble. I am super stoked to get the track bar on my truck!

I think my 04 3500 crew cab longbed is crying for a Thuren setup. Lucky enough only little ways away from Bend hahaha maybe have to come see what could be done for it, got a red goat fab bumper on front and definitely could ride better on these dang Oregon loggin roads

For a real wheel drive 3500, do I need a new trackbar if leveling , or factory is ok?

Why dont both sides have a zerk to grease like the core 4x4 track bar?

You said today you guys had one for the 95 3500 🤷‍♂️ I don’t see one ?

I have a AEV SC 3 inch lift. I smoked the track bar in Moab. AEV was nice and warranted it for us. And I will install the one they sent. But if this continues to be a problem? I’m gonna be looking for a replacement.

I’ve sent an email about getting replacement bushings, been waiting 2 days for a response..

what wheels are those?

Love your stuff but I hate those bushings

You just explained 90% of the issues with a solid axle front (or rear). Trackbars are HUGELY overlooked. Synergy's has some issues due to r&d. PLEASE start making Jeep JL parts.

6:37 isn’t that what causes dead wobble? 🤔 all that play

I have thuren fox 2.0 is to soft in my opinion ?!!

I have thuren fox 2.0 is to soft in my opinion