Awesome Mr. Don! I was hoping to get some videos done soon in the future as well for you guys! Super excited to see the new shop as well! Looking forward to more and upcoming videos.

I’m loving the videos from the man himself! Keep it up! I’m more than pumped to get the rear bumper on my 2018 to match your beast of a front!

Don, you rock! Getting ready to order your kit in the next month or so. SO PUMPED.

Thanks for the schooling on taking the proper measurements. I personally like a slightly nose high truck or dead level at the least. Got a 98 12 valve on Thuren shocks and coils💪, love them. Wish they made more component parts for the ol 12valves 😢.

I like how all the "negative" comments were deleted😂😂😂 Just leaving the "wow" "thanks" "very informative"

So this is one of the most informative videos I’ve seen on here for this exact topic. Thanks!!!!

That’s why when I put the 2” leveling kit on my truck I also did 2” leaf spring blocks as well

keep em coming maaan love these videos

I love the Dead level look. Nice truck.

Good to see the videos! I have a 2005 Cummins with some of these goodies waiting in my ‘shopping cart’ online. Debating on doing remote shocks and keep factory leafs vs overland shock and full leaf replacement. I’m leaning towards full lead replacement. A video may tempt me...

Keep em coming !

Don dropping the knowledge for all the people out there. Thank you sir!

The most important consideration is caster angle, if you're going to do this you must ajust caster, or drop your control arm rear mounts. Not fixing caster induces high risk of death wobble. I have built many trucks.

I agree with you Sir, I like the look and I want a dead level.

Good looking rig. I’m either getting y’all’s or a carli. . Quality matters !!!!

That is a beautiful rig 👌🏼

VERY good looking truck

Good stuff man. Keeping it simple. Those gold hub caps though! Lol

I added 17x9 wheels with correct offset on 35 inch toyo mt. For ride quality i chose 1/2" taller front coils, adj front track bar, rear track bar, and new shocks front and rear. 2020 pwr wagon. Ride improved, about 1/2" rake. Love it.

Great looking truck... I especially like the wheels don't stick out their Even with the body

I even prefer the front a tad nose high, great products by the way! 🇺🇸🥃

I’m not most people, that truck is perfect!

Good video....when do I get a tour of the new place ??

What is the set up on this truck? I think it looks perfect and is what I want. Is that the .5” lower in the rear and .5” lift in the front? Looks great!

I really wish you guys offered a shorter coil option for 2nd gens. I want softer coils and a bit of leveling in the front (1.5" would be ideal), but I believe your 2.5" coils will put it dead level and with any moderate load it's going to be squatting, and I really don't want to add any lift to the rear, the truck is already tall enough when it comes to using it for truck things.

Great topic and information. What is the tire size and wheel size on this Ram?

What size wheels and tires? That setup is clean.

Looks great to me.

Most people do not want a DEAD level truck ?? aaaa yes i do and so do most of the people i know ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, And as a follow up . I got the thuren kit with remote res foxes, added 37" Toyo AT3s. and it is day and night difference in ride . I could not be happier. There counter people are awesome and helpful . I got the front and rear track Bars. and rear foxes as well. all i think i need is the factory rear dual rate springs in the rear are stiffer than my new fronts. so i think I will upgrade. I have the 2020 power wagon and i also run airbags in the rear with the daystar cradles from Thuren. They work perfect.

Hey brother, what’s your set up? I just picked up the same truck and I like your set up.

Thank you

what size tires are those?? great look!!.

love the wheels what brand are they?

I think the hood height vs. bed height at actual level messes with peoples eyes / perception. Looks perfect the way you've got it IMO......

What’s the wheel and tire size? Also who does installation for you guys in central CA near Fresno

On the 2nd gen would it work if you measured from the ground to the quarter panels front and rear of the truck since the wheel openings are different front and rear?

Any weight capacity reduction with the 1/2" lowering springs in the rear?

I just measured my 21 RAM 3500 Diesel. Spring rear - no airbags. I got 25-1/4 front and 26-1/2 rear. All stock.

Is this a thruren leveling kit? It looks perfect I would even like it if it was a little nose higher not exaggerated but it wouldn’t bother me.

do you need to account for older leaf springs when measuring on a 7.3 diesel? thank you.

I appreciate the DROP in the rear end with a 2" front for the leveling system you showed here, the rear of these trucks are so dang tall, getting moto bikes in and out has become a chore. The last thing I want to do is to raise the rear even further. Any chance of you doing a Carli vs Thuren video to show pros and cons of the two systems?

How or where can I find a discount code for when checking out?

Sick rims. True beadlocks?

14 2500 single wheel crew diesel. Level is 2" front with 1" rear or 2.75" front with 1" rear?

How do you fix highway vibration after leveling kit

How well do the 37s fit? Any rubbing?

What’s the suspension set up you have on this I’m browsing your website

1-1.5" rake is fine, especially when your loading it up for overland trips

Going to do 2.75" springs on a 2018 ram 2500 do I need the track bar?

If you measure off of the bottom of the rocker does it still measure level?

Air bags: I go from ugly squat, to good looking level, to awesome looking normal truck.

Your truck sits at a perfect height

What size wheel and tires you running?

Just estimate? Great insight.

I like that truck, that is just level kit and 35" tires?

I have seen enough Carli vids, let's see some more Thuren vids! ....please

Always want a 1 inch rake for towing unless y'all got air bags.

Size tire & rims on this truck? What the offset to

On an 06 QC/LB dually with alien arms and 3.0s are the Xtra soft coils a better match with the long travel leafs or are the 3" coils the best option?

I don't want my truck level because what it's used for .. it's not a pavement princess it's a work truck but also made for play too

is there a spring settling time? like when you install the springs brand new will they sit high at first and after sometime they come down to the actual advertised height?

I like the dead level look. Maybe I'm just weird I guess.

So I have a question, I just got a 22 2500 with factory ram self leveling air air bags in the rear. What I like is I can lower it one inch in the rear for a leveled look or for a trailer. I want to do 2 inches in the front and 1 inch links in the back. Will I still have rake? So when I hit trailer alt height I still get a dead leveled look?

What is the rim tire size?? You must have the alien radius arms installed to clear those things but it looks amazing

I tow with mine so I want the rear a little higher.

What size and offset are the Innov8 wheels you're sporting on this truck? Thanks!

Size wheels & tires & off set?

Wheres videos of 19+ ram 1500?

What do you sell/recommend to get this look on a 2020 Power Wagon?

How are yall able to price your parts cheaper than carli ? Lol Looking to do a 2.5 rear, 3.0 front

Innov8 wheels?

You guys need to hurry up and figure out what is needed for the new ram 3500's.

Ah, the ol' Carolina squat. Looks like there's a load of moonshine in the back. Hopeful wishing.

I went 3in on the front and it's nose high. 2022 ram 2500 hemi.

I was told to measure from ground to bottom of wheel well. Most are a 2.5-3 inch difference from front to back. I have not measured a new 2500 with airbags but my new 3500 is about an inch to 1.5 difference from front to rear. I would like to raise it more to have space between the wheel wells

Here's an insiders take: Don't level lift your truck. Ever.

I actually haul heavy items in the bed of my truck like bags of cement and lumber, as well as towing a skid steer. I didn't by a 3500 to pose or jump berms. I have an ATV for that. I hate the look of a sagging rear when a truck is doing what is designed to do.

Dang man u have to b persice on when ordering from yall 😒

🤦🏻‍♂️

that's bullshit. nobody wants lower in the front

"motos"

This was painful to watch. I feel mo dumb now Darrel

Most useless video ever, can we get someone who doesn't complain and actually talk about the products?

This truck sitting on 37s or 38s. I'm thinking about this settup for my 23 dually auto air assist