TIG Welding: The 6 Torch Consumables That Can Handle Any Job

Рет қаралды 64,318

Күн бұрын

After spending a small fortune on all sorts of TIG welding accessories and consumables, settling on just a few has made things simpler for me.
***Affordable self-paced welding courses taught by me***
courses.timwelds.com
***Where to Buy Practice Metal and Weld Kits***
USE DISCOUNT CODE 'TIMWELDS' TO SAVE 10%
weldmetalsonline.com/?ref=048...
*** Shopping List For #17 Torch ***
(Discount code TIMWELDS will save 5% on your order)
Gas Lens, Collet & Furick Cup: usaweld.com/products/fupa12-c...
Tungsten: usaweld.com/products/2_percen...
Collet Body: usaweld.com/products/collet-b...
#5 Cup: usaweld.com/products/alumina-...
*** Shopping List For #9/#20 Torch ***
(Discount code TIMWELDS will save 5% on your order)
Gas Lens, Collet & Furick Cup: usaweld.com/products/fupa12-c...
Tungsten: usaweld.com/products/2_percen...
Collet Body: usaweld.com/products/collet-b...
#5 Cup: usaweld.com/products/alumina-...
***Easily Find Other Torch Consumables***
(Discount code TIMWELDS will save 5% on your order)
usaweld.com/pages/tig-torch-c...
*** Where to Buy Torches and Welding Machine ***
(Discount code TIMWELDS will save 5% on your order)
TIG Torches: usaweld.com/pages/tig-welding...
HTP Invertig 221: usaweld.com/products/invertig...
***More Videos You Might Like***
HTP Inverting 221 Review: • HTP Invertig 221 Revie...
Build a $20 Tungsten Grinder: • TIG Welding Tungsten S...
TIG Welding Basics for Beginners: • TIG Welding Basics for...
Aluminum TIG Welding Basics: • Aluminum TIG Welding B...
***Affiliate Notice***
Some of the links on this page are affiliate links which provide a small commission from sales to help support this channel and make these videos possible. Thanks for your support!
***Additional Description***
Gas Tungsten Arc Welding (GTAW), also known as Tungsten Inert Gas (TIG) welding is a complicated process with an incredible number of accessories available. While special applications may require certain setups, most general purpose work can be done with the 2 setups that I show in this video.

Пікірлер: 75

@Peter_S_ 2 жыл бұрын

That's 10 minutes I'm glad I spent. Thanks Tim!

@TimWelds 2 жыл бұрын

You’re welcome! Thanks for watching!

@trooper11c Жыл бұрын

Great job explaining what you use and prefer. I think you're a great contributor to the welding community.

@jamesb43 2 жыл бұрын

Awesome info as always! The explanation of your use of that flow tester at the end was particularly helpful to me (just picked up the same one and I hadn’t gotten around to googling the unit conversion). I get so much value out of the little details like that from your videos.

@Hey_Its_That_Guy 2 жыл бұрын

Great job! By far the best explanation of TIG welding equipment I seen yet.

@Thewatson77 2 жыл бұрын

Great basic tips Tim. Thanks for sharing

@wesmccarley9845 2 жыл бұрын

Great Video!! Thanks for sharing this information.

@bodeine454 2 жыл бұрын

My new 200 amp DC tig/stick welder just arrived today, I'm still learning about what I need for a good set-up and all this info is great, thank you 👍

@dougtenney1029 2 жыл бұрын

Thanks, Tim. Your videos are very helpful!

@nitrofish1974 2 жыл бұрын

Very awesome tim clear and to the point 👍 I'm just starting out and enjoying your videos 📹 😀 👍

@twentyninecycleworks 11 ай бұрын

Thank you for some excellent, usable tips

@mattaomartinez.9817 Жыл бұрын

I usually like sticking with an 8 cup on stainless most of the time. The color is great on the 10 plus cups but I like to save my gas when I can. I kinda hate running full post flow when I tack up stuff too. You can also use copper to create gas traps for your weld joints, good for absorbing heat too.

@kingfisher46 2 жыл бұрын

Great teacher Tim , thank you.

@floridasaltlife Жыл бұрын

Great videos Tim !!!

@drevil2783 2 жыл бұрын

Been awhile. Nice video. This exactly what us amateurs need...👍👌👏👊

@Cloud9999Strife 2 жыл бұрын

You make the best welding vids on YT

@brianbogan3363 2 жыл бұрын

Thanks for this!

@ke6bnl 2 жыл бұрын

A lot of good information

@TimWelds 2 жыл бұрын

Thanks so much for watching!

@user-pl1pj2ms1v 2 ай бұрын

Thanks you answered my question to a T !

@dr.feelgood2358 Жыл бұрын

looks about the same diamond coated disc for tungsten grinding that i use...only mine is mounted to the outside of the grinding wheels on a bench grinder. 100 grit works great!

@rashidbasheer1192 2 жыл бұрын

Good job man

@zayanzayan1293 2 жыл бұрын

Thank you very much

@Verificador119 Жыл бұрын

Thank you,good information in your chanel, Good luck!!

@mub3ady 11 ай бұрын

Thanks You clarified and simplified a really confusing matter to beginners like me. Oh well, no I need to know what to do with my newly bought dc tig welder that I specifically for welding aluminium 😂 Sometime you learn the hard way. 😅

@lassekaasinen2981 10 күн бұрын

Great video!

@TimWelds 9 күн бұрын

Thank you! I appreciate it!

@JeffinTD Жыл бұрын

Great video. What are your thoughts on clear cups? Say Furick Fupa 12 clear with gas lens, and the Furick Ally 5 clear kit that comes with a stubby non-gas lens collet body….

@marksleeper9385 Жыл бұрын

great vid

@riccardodannazioneHC 2 жыл бұрын

Love your vids

@ivanmykhailov8767 10 ай бұрын

Hello Tim. Have you got any expirience with jumbo ceramic cups? If so it's very interesting to know your opinion. Thank you in advance.

@bernardmauge8613 2 ай бұрын

there is a caveat with #5 on Aluminium is the cup max amperage, You will need a bigger cup for anything over 160 amps.

@Chevroletcelebrity Ай бұрын

do you have proof of this? 🤨

@WilliamRNicholsonLST-1195 2 жыл бұрын

I have enjoyed watching your videos for the last week or so. They are very good & enlightening. I am now convinced that this is all too complicated for ordinary humans like me. You'll only have to change your name to George for my planned projects to be completed properly . I've decided you are worth every penny that I can pay you & just keep your ears up so you can hear me when I say " Hey GEORGE ! Come Here I've another project for you ! " Thats what George Foreman always says when he asks for help & I'd NEVER Argue with George Foreman or ........... George ............. or George ............... ALL His Sons are Named " George " .............

@kravselj 2 жыл бұрын

I do 90% of tig with ck20 and standard 5 or gas lens 6 cup. Titanium #8 gas lens. People tend to use big cups for no reason at all. You dont need #20 cup to do nice welds, you just need to know how to control heat input. For that you need some theoretical knowledge and a lot of hours under mask.

@Jesusislord-zt5xu 2 жыл бұрын

thanks

@DustinApple 2 жыл бұрын

so ive read a argument that large gas coverage on AC will result in a wider arc. where theres gas, there can be arc. So if you arc longer than you should it will allow the arc to be less controlled. For this reason the argument says NOT to use gas lenses. But i think this argument may be outdated because now you can get 4,5,6 cups that neck down around a stubby gas lens when before all you could get was 8,12,14,25. with 1 yr of aluminum tig experience I mainly run #8pro stubbys but i do find that i struggle when small precision is important. Im going to drop to ally5 furick & see if it will narrow my beads. interested to see your reply.

@swarfmonster3998 2 жыл бұрын

Brilliant

@timothysmirz2160 5 ай бұрын

I have the torch that came with my YESwelder 2050 (WP-26) that I would like to replace with a smaller one. I don’t need the on off controller as I bought a foot pedal, but I really WANT to try the much shorter gas lens.

@TimWelds 5 ай бұрын

The short gas lens will fit on a 26 and it helps a lot. I really like the CK torches. A 17 will be a bit smaller but still share consumables with the 26. A 9 is much smaller, but uses different consumables and has a lower amperage capacity.

@timothysmirz2160 5 ай бұрын

@@TimWelds Thank you, I want to get rid of the big clumsy 26 that it came with. I had always used a water cooled 17, with a #5 cup. Years ago I was a professional welder specializing in SS, but learned on Aluminum using a oxy/ acetylene torch. I still prefer SS and aluminum to this day

@diggindiggenit6540 2 жыл бұрын

Just subbed, very educational Tim, I bought a tig welder but it came with out consumables, so I have never even tig welded before and been trying to figure out what I need, what a nightmare trying to figure this stuff out, first I needed cord plugs 100 amp that's done then I needed consumables, not knowing information I tried to get a pack of 5 of each items so I got that except for the tungsten something I forgot when ordering, I got the tanks of argon but there to small for the welder and it's the biggest my local welding shop would sell me, I ended up buying the lincoln precision tig 275 k2618-1 it came with the roller stand and water cooler etc package, so all I have left is the tungsten, larger argon tanks (if I can find them) and upgrade the electric in the garage to 130 amps min. looking towards more of your neat videos.

@GiovanniGiorgo 2 жыл бұрын

What size tank did you get?

@GiovanniGiorgo 2 жыл бұрын

Most places should sell you a 120 or 150cu ft tank no problem

@diggindiggenit6540 2 жыл бұрын

@@GiovanniGiorgo The biggest one they would sell me otherwise I would have to just rent a larger tank for a year and I wanted to own. Now the issue is my house is only 100 amp service so I will have to upgrade to 200 amp service just to use the welder.

@diggindiggenit6540 2 жыл бұрын

@@GiovanniGiorgo Yeah I think I got the 150 they are about four feet tall

@GiovanniGiorgo 2 жыл бұрын

@@diggindiggenit6540 ok cool, that 150 cu ft is big enough for you to use.

@ke6bnl 2 жыл бұрын

can you put a 9 head on a wp17 hose? are the heads interchangable?

@Fab2Mc 2 жыл бұрын

Super 🎉👍

@TimWelds 2 жыл бұрын

Thanks a ton!

@anilgc8539 2 жыл бұрын

Can this cup handle brass weld

@windywaz 3 ай бұрын

Word of caution. Lanthinated tungsten is slightly radioactive. Not as bad as Thoriated, but you still dont want to be breathing grind dust.

@Chevroletcelebrity Ай бұрын

there is no evidence of people getting sick from tungsten electrodes

@cc2x4 2 жыл бұрын

Hello, Tim! I got a cheap stick welder that has a TIG lift function. What kind of equipment would I need to test this out?

@joseph_seed. Жыл бұрын

I have a question about tungsten. How do you cut it apart? ☺️

@TimWelds Жыл бұрын

You can use a diamond wheel to cut it, or just make a nick in it with a grinder, clamp it in a vise right at the nick, then bend with pliers NDI it will snap off. They can split when you snap them, but mine usually don’t.

@joseph_seed. Жыл бұрын

@@TimWelds thanks for the answer 😇

@ZILAwelds 2 жыл бұрын

👍

@melgross 2 жыл бұрын

I also advise people to just get a CK. I’ve tested a number of Chinese versions from eBay. Some of these are no more than $10. What I found with a couple of the really cheap ones that they’re not made from copper. Some are made from copper plated brass, which is not great. But I found a couple that heated up so quickly I couldn’t understand why. When I cut them open, I found that they were copper plated-zinc! Zinc! I mean, really now. That’s just dangerous. Also, for most anything, 3/32” electrodes and 2% lanthanated. That makes it simple for those new to this. Just grind a longer point for thinner materials, and a blunter one for thicker.

@alientech5112 2 жыл бұрын

What cnc plasma cutter do you use?

@TimWelds 2 жыл бұрын

I have a Premier Plasma table with a Hypertherm Powermax 45. The Hypertherm is awesome and they have great customer service; I would definitely recommend them for plasma cutters. As far as the Premier Plasma table goes, it works pretty good for the price, but I had some quality issues early on that would lead me to pick a different brand next time.

@alientech5112 2 жыл бұрын

@@TimWelds thank you

@rosahearn6132 2 жыл бұрын

What is K-TiG

@TheRitchieLeeShow Жыл бұрын

I watch the f dude, I watch the p guy, i watch the j dude, i watch the k guys and many more. Thanks to all, but i got an understanding that has never sunk in before. 😊

@SukardiKardi-gm4rf 5 ай бұрын

0:36 0:38

@yourfriendlyneighborhoodla2091 2 жыл бұрын

And of course, the damned pink cup that everyone removes off the welder and refuse to put back on it

@JamesSamples 2 жыл бұрын

I really like your videos. I'm a master electrician and a certified firefighter. I like seeing the fire extinguishers accessible. However, I fear that as your channel continues to grow the number of people that decides to install an extinguisher on the same stud as the light switches will increase as well. That stud generally has wires running up and down it on the inside of the wall. I fear an increase of house/shop fires by your viewers following your lead on that one. Had I been able to watch your videos prior to my welding years that would have been nice. As I'm learning from you, I'm remembering the struggles. Thanks!

@nhhandyman 2 жыл бұрын

I keep quiet on things I have no solution to. I saw them mounted there - thought it was an interesting choice because if their was smoke -odds are the people in the room know where the light switch is and could find them easily. I also thought they could be knocked off easily because there are always hands there. However your statement implies that they should not be mounted on studs where you know electrical wires exist on. I could infer from that: 'electrical wires inside of walls can be a source of/cause of a fire' And yes, of course they can be - if installed incorrectly or damaged after installation (for example shorting out the RX wires when you missed the stud while you are hanging a fire extinguisher :-) ) Where should they be mounted to avoid this issue?

@JamesSamples 2 жыл бұрын

@@nhhandyman It's always best to use a voltage sensing pen from Lowe's... to find a stud that doesn't have wires running along side or through the center of them. We drill holes through the studs to run wires through that are are far enough back to avoid sheet rock screws but not far enough back to avoid longer lug bolts. Even without a voltage sensor pen, you can rest assure that those studs have voltage along side of them / or even through the center of them. I can see why the location is attractive from a response/accessibility stand point. 🙂The problem is that It's fire hazard that looks attractive.

@GiovanniGiorgo 2 жыл бұрын

You can hit wires no matter where you mount things, this video won’t increase the odds of anyone doing that or starting a house fire. It’s a million times more safe to mount that fire extinguisher on a stud then hanging a hundred pictures in random places on the walls all over the house.

@zayanzayan1293 2 жыл бұрын

If I wanna build a boat aluminum boat