Tillotson 212 E-Start Budget Build + Rip | 7,000 RPM Torque Monster!
Рет қаралды 515,035
2 жыл бұрынWe build the Tillotson 212 electric start engine in Charles' Coleman CT200U-EX mini bike! Charles likes his Coleman mini bike to be torquey, so we chose a camshaft, carburetor, and other options for this Tillotson 21w electric start to reflect his tastes. In order to keep the factory flywheel with the ring gear for electric start, we have to keep the RPMs somewhat down. Thankfully, the MOD 2 camshaft makes power to 7,000, with lots of torque at the low end.
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: bit.ly/3T8njaF
----------------Go Power Sports Parts Used in Today’s Video---------------
Tell them CarsandCameras sent you at checkout:
Tillotson 212 electric start engine: bit.ly/2OAJQRe
Billet rod for Tillotson 212 e start: bit.ly/3NWnfsa
Mod 2 camshaft for Tillotson 212 e start: bit.ly/3LOD7eq
Mikuni 22mm carburetor kit for Tillotson 212 electric start: bit.ly/37iOoEG
Mikuni style throttle cable for Coleman CT200U-EX: bit.ly/37mTBeP
Coleman CT200U-EX exhaust: bit.ly/3xeyJ4l
Racing muffler: bit.ly/3uREG4g
420 pitch chain: bit.ly/2RL38UY
Go Power Sports: bit.ly/3QKyODE
Get $100 off any Langmuir Systems Crossfire CNC plasma table using this link, or use code CARSANDCAMERAS at checkout: store.langmuirsystems.com/disc...
Join the CarsandCameras Pit Crew: / @carsandcameras
Subscribe to our PODCAST channel: / @atthewheelwithcarsand...
NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandca...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.
@El_Chompo 2 жыл бұрын
Don't you guys have over like 30 running machines at this point? You should have 30 friends over and get them all running at once around the track for a glory parade to showcase all of the builds you have done in an epic celebration ride!
@mindovermatter3988 2 жыл бұрын
Doooooooo ittt
@mindovermatter3988 2 жыл бұрын
Just dooooooo ittttt
@w.nurmi58 2 жыл бұрын
or do a giveaway and get subscribers to do it
@Fearborne 2 жыл бұрын
@@w.nurmi58 nahh, im sure C+C doesn't exactly wanna give away expensive machines for free lol
@messybench 2 жыл бұрын
That would piss off the neighbors. Maybe a fleet playday at the OHV park?
@mikesbarn1858 2 жыл бұрын
Don’t forget each sticker adds 1-2 hp. Also if Charles blows on the air filter while riding he Could add 3 hp.
@cnmckenna 2 жыл бұрын
Especially a let's go Brandon sticker.
@thorstenhulser5008 2 жыл бұрын
But be careful with NOS stickers. Their power increase is really hard to handle.
@nolansprojects2840 2 жыл бұрын
Charles is better than a turbo for small engines
@kullijuusto 2 жыл бұрын
My friend secretly added too many stickers on my racing mower and the internals and clutch are suffering from the extreme power 😢
@brianwilliams1117 2 жыл бұрын
I've never had or worked on a go-kart or mini bike or anything and I've watched every video for like 2 years lol
@johnnickerson6522 2 жыл бұрын
Here's a tech tip: Keep a few golf tees in your tool box. They are a great way to quickly plug a fuel line during disassembly.
@Deucealive75 2 жыл бұрын
Yep. I cut mine down to about 3/4" long so it hits the taper a little.
@cheeznipsmagee2357 2 жыл бұрын
Use a pair of mini needle nose vice grips
@johnnickerson6522 2 жыл бұрын
@@cheeznipsmagee2357 Those will certainly work well but you can buy a whole bag of golf tees for the price of one pair of vice grips.
@Deucealive75 2 жыл бұрын
Hemostats also work well.
@twitchsix20five 2 жыл бұрын
@@johnnickerson6522 or, pick up broken ones (3/4 length) on your next trip to the links.
@eddyd.105 2 жыл бұрын
I had a snap ring puncture sheet rock when I was rebuilding the top end of my old yz85 definitely wear safety glasses when removing any sort of compressed snap rings
@vipervidsgamingplus5723 2 жыл бұрын
If it pierced some dry wall then make sure to have protection around your neck as well, eyes aren't the only sensitive place.
@jerryfallin1753 2 жыл бұрын
I didn't see him put the snap ring back on the piston, hopefully he didn't forget to !
@machninety7334 2 жыл бұрын
I gotta be honest, there is something about watching small engine mini bike builds and doing it to that makes it more fun and enjoyable than building car engines. It’s like we don’t have the stress that comes along with doing big money builds you know? This is where you find true enjoyment with the right people as you take turns trying it out and not having to worry too much about letting each other ride what you just built.
@billwilliamson9842 10 ай бұрын
I sold all my old cars a few years back and went hog wild into mini bikes. havin more fun then I have had in years with the old cars and hot rods.
@goodguy...badrep. 8 ай бұрын
@@billwilliamson9842 I'm leaning this way as well...
@billwilliamson9842 8 ай бұрын
@@goodguy...badrep. do it but careful, it can become an addiction lol I think i have about 4-5 finished bikes about 20 more rollers, a warehouse rack full of engines, parts, etc etc etc I got out of the old cars because my back went south on me and I couldn't work on them the way I used to. I sure don't trust any of my toys to someone else, so the cars went bye bye. On the minibikes though I can still do 100% of it all. I find the smiles per gallon are much better on them for me too.
@davidprice9135 2 жыл бұрын
Ike, we call it a "Geezus Clip." As it flies across the shop, we say "GEEZUS I'll never find that again !!!"
@jstephenallington8431 2 жыл бұрын
🤣
@joewebster3532 2 жыл бұрын
really liked the flow and style of this video and build. I liked the way you went and showed the whole process. you guys really are dialed in and work well together and it shows through the show. Watch all your videos, love the content. Thank you boys. Grats on the new build Charles!
@mitchthompson3246 2 жыл бұрын
I really appreciate the details in production. The sound design is well done, balanced, as loud as it needs to be to replicate their experience!
@skylinesolutionsmisguided_6721 2 жыл бұрын
Charles looked like a kid on Christmas morning from start to finish 😊. Nice build keep it coming 👊👊👊👊
@roadlife8973 2 жыл бұрын
Charles measurements are the best and most accurate
@la_plata3588 2 жыл бұрын
The boys skim over the most crucial point is to pre torque the rod bolts on the the crankshaft to check clearances out of the motor then assemble in the block
@SNELLERIZED 4 ай бұрын
Most of this build was done carelessly, IMHO.
@CarsandCameras 2 жыл бұрын
Can y’all spot the differences in our track?
@jeffrykopis5468 2 жыл бұрын
I'll be watching for that, thanks.
@dankrafted 2 жыл бұрын
spotted a few hay bales at the corners and the distance markers. you might want to stack the bales a bit higher because all they'll do at the moment is stop the bike and send the rider into the trees head first :D should help with the carts and buggies though 👍 keep it up fellas
@ronniewilliz153 2 жыл бұрын
yea nice job on the incoming turn notice an bails of hay
@WinzloCom 2 жыл бұрын
Can’t seem to locate the video on the making of these track changes that you referred to. Is that still coming or just not been published on the channel yet?
@ronniewilliz153 2 жыл бұрын
@@WinzloCom it's in this vid they put some hay on corners an some indicators that a turn was coming up.
@privatedata665 2 жыл бұрын
Great content & reminds me of my kart racing days . Season opener we showed up with a Harbor Freight engine with many upgrades on a Bad Maxx . Lots of people with Briggs engines were laughing at us in the line up for practice ...... they all had frowns after the night of racing . Thanks for the memories
@davolbc 2 жыл бұрын
This line by Isaac explains so much about him " this Sunoco gas smells so good" ROFL!!!
@timothyledger2930 2 жыл бұрын
Would love to see you make a rear swing arm and make it full suspension.
@ethanh3421 2 жыл бұрын
You mean do exactly what redbeard did??
@suavefpv1247 2 жыл бұрын
@@ethanh3421 Who's that? Not CarsandCameras!
@ethanh3421 2 жыл бұрын
@@suavefpv1247 damnit! You got me
@suavefpv1247 2 жыл бұрын
@@ethanh3421 😂 I only know red beard the pirate! 🏴☠️ argh Matey!
@synshenron798 2 жыл бұрын
Im doin that at some point
@sabrom 2 жыл бұрын
I like the way you did the Rod swap not removing Piston from the top but from the bottom Bore keeping the oil rings intact nice job Issac.😁😁
@jstephenallington8431 2 жыл бұрын
Isaac for the win!
@nevereasyranch7315 2 жыл бұрын
Dudes, I hooted a hollered when I saw that y’all added that laser timer. I’m so glad y’all heeded my suggestion to do so. Now y’all can get some awesome accurate times on your laps. 👍👍
@patrickhartman6818 2 жыл бұрын
Great show and also the short clip at the end with Charles accidentally moving the light away. Love when people have fun
@glennmurray423 2 жыл бұрын
I'm so glad you bought Charles into the crew he's a legend. Book of knowledge general all around nice guy but brings a laugh to your videos as well good choice guys! Goofy but we love ya Charles!
@TXH1138 2 жыл бұрын
Good to see Charles getting his name on the board. I have a feeling he's been sand bagging so as not to show up the 2 OG's.
@aaron_brown7324 2 жыл бұрын
Charles has been sandbagging for sure... he can out ride them all
@contraband1543 2 жыл бұрын
@@aaron_brown7324 Yeah dude has more cahones than both combined
@davolbc 2 жыл бұрын
@@aaron_brown7324 not sure about that I think Isaac might have an edge on him only because he's crazier.
@FarmerFpv 2 жыл бұрын
@@contraband1543 How old are you, dude? If you're still young, get rid of that narcissism now before it's too late snd ruins your social life,
@aaron_brown7324 2 жыл бұрын
@@davolbc nah... maybe when Ike was 25... not anymore and especially not after what he did to his shoulder... Charles can beat them both and he knows it but is too nice to just straight up embarrass them.... he is still just the employee and is being smart about it
@jamesmcgee9279 2 жыл бұрын
Well done fellas! I'm glad your rear end is alright Charles. Congrats on the new track tech gear. Thanks for sharing guys!
@madmaxsmotorcycles 2 жыл бұрын
You guys are an inspiration. I have been seeking out the oldest Briggs & stratton's and Motors that I can find for years. I can rebuild cars but I find it far more satisfying to build small stuff. I appreciate your guys's videos and wish that I could do what you. unfortunately I've been in a relationship for 2 years wouldn't allow me to go out and work in my shop that I built just for that reason. But on the positive side that relationship just ended and now I have plenty of free time to get back out in the shop and it feels good. I can say it feels very rewarding to find an old motor they hasn't run in years and get that baby running again. Much respect. I don't know how old my oldest motor is but it's a two and a half horsepower Briggs & Stratton 4 stroke with a horse hair that you have to oil air filter and a 2:1 gear reduction supposedly it was for a water pump at one time and it's the oldest piece I have. As a side hobby I rebuild riding lawn mowers and build racing lawn mowers to ride on the beach which bypass the street legal laws. My fastest lawn mower does over 30 and rides huge wheelies.
@madmaxsmotorcycles 2 жыл бұрын
For years.
@TheUncleRuckus 2 жыл бұрын
I wish my old lil Indian mini bike wasn't destroyed when our house burnt down 20yrs ago bc I would've loved to do this to it. 😖 Looks super fun, congrats Charles 👍👍
@JustinMFCurry 2 жыл бұрын
Coming from someone who is learning small blocks you guys are the best and most informative !!!
@donaldhalls2189 2 жыл бұрын
That's the first time since trade school that I've looked into a small engine enlightened I am now a bit more clued into the rocker set up thank you all the best to yous and your loved ones
@einblutwolf5356 2 жыл бұрын
That little piggy is a "hang onto Your helmet" ride! I'd almost want a dish soap dispenser on that rear tire... haha. Have any of You guys in the garage seen any 2x2 wheelers before? I remember an old farmer here in Indiana had a 2x2 called a Rokon that he bought back in the mid 1970's. He had an entire assortment of the product upgrades. One being a short snow plow blade, a water pump set up & some other farm implement equipment. He'd always say. "Go get the mototractor, it'll do all the work for us" This was a great video here.
@SuperBongface 2 жыл бұрын
30:06 My best friend always said "If you're gonna be dumb, you gotta be tough." lol. Hope you're alright Charles ;) You guys rock!
@theupscriber65 2 жыл бұрын
I helped bring the cracked rod to the 7.3L Powerstroke diesel. It's great from a manufacturing standpoint and the cap only fits one way, fits perfectly and is a more stable connection to the main rod body. I had concerns about replacing the old 4140 forged rods with a powdered metal rod. The forging was stronger and able to bend in hydro lock situations where the powdered rod would break. But we never had a bunch of engine failures due to the change to fractured powdered rods.
@thedr309 2 жыл бұрын
glad to see Charles wheel something, he is good and has a good understanding of how to apply the power, John on the other hand........lol I also was wondering what Isaac was smokin, he couldn't remember squat....lol but it did add tho the humor. good job Charles!
@JohnHill-jm7tm 2 жыл бұрын
Another great video guys. 2am and enjoying with my coffee. Ike really enjoyed talking to you Tuesday morning. Hope we get to do it again. This Old Man loves you guys. 🛵🧔💝💝💝
@rebelcat420 2 жыл бұрын
Trick for removing studs: take an extra nut that fits the stud and make a “clamp nut tool”. Take the spare nut and cut through a flat all the way through to the threads. Now spin the nut onto the stud and squeeze it using vice grips etc. the nut will grip the stud on all sides equally and not damage them. Also works for gripping a threaded stock/bolt etc in a lathe to cut etc.
@theoldfartschannel3692 2 жыл бұрын
Interesting build. I installed a NR Racing 280 series marine cam, #26 springs, and billet rod in both of my neighbors boys Coleman EX and tweaked the governor to 4800-5000 rpm with carb re-jetting and header. Installed torque converters. Beast up to 5000 rpm. I still advised not to hold it at full throttle for more than a few seconds.
@leadgindairy3709 2 жыл бұрын
Fracture-split conn rods are cheaper to produce too, they're stronger, and have a longer service life than separately machined caps. I think that is so cool! I love engines!!! They are the best invention in human history by far, and yet barely even considered by anyone, who literally depend on them every day to work flawlessly.
@WyFoster 2 жыл бұрын
Only downside is that you can't resize them.
@WestiePaul 2 жыл бұрын
Well hello to you all .. Much to my amazement.. this episode of car's and cameras..(It'll be fine) was one one of the best stage 2 installations I've actually watched in roughly a 1 year and a half.. Most excellent keep up the fantastic footage.. Paul ✌️
@steveskouson9620 2 жыл бұрын
About 5 years ago, I was working at an auto repair shop. Just me, and the owner. His wife also did paperwork and stuff. One lunch, I was reading a Hot Rod mag, and they were discussing rod big end types. they mentioned the cracked ones. 2 hours later, we were dropping the oil pan, on a car with "rod noise." Boss said, let's see if it is just bearing noise. Removed the rod cap, and it was a cracked rod, which neither of us had ever seen. (Except in that Hot Rod Magazine.) The rod bearing and the rod journal "looked" OK. Put the oil pan back on, oiled it, and it ran, just fine, for about 3 minutes. The car was a cheap, used up, econobox. Wasn't worth pulling the crank, and getting it turned and more bearings. It was worth the hour we put in. Funny thing, seeing the article in HRM, and then seeing our first cracked rod. steve
@alexlacroix8127 2 жыл бұрын
The timing set up / lasers is awesome. Now yall will be receiving data. That's night and day compared guessing. Good job that is a professional move.
@californiahighdesertpreach2261 2 жыл бұрын
You're a very good sales men, and very slick at getting people to order parts from you're source.
@lbbork 2 жыл бұрын
New building. Improved presentation. Good job guys!
@GodschildinNC 2 жыл бұрын
Like the intro with professor Issac! The game out of removing the governor was funny. My friends and I used to compete on everything like that! The bike sounds and performs great!
@MotoDeSoto 2 жыл бұрын
If Charles ever starts his own Channel, that would be a great name for it, “Charles Loves Torque” 😎
@matthewharr6372 2 жыл бұрын
Really enjoyed this video. Thank you for not using background music all over the video.
@daviddeal90 2 жыл бұрын
hey guys, 30 year marine tech here.. AWESOME BUILD !! they are called fractured cap rods. used on outboards, learned to line them up using a pencil.
@grassy-qb6qc 2 жыл бұрын
Lol I sneezed exactly the same time Ike sneezed haha. Good ole south east pollen is already floating around.
@gelsol 2 жыл бұрын
Gotta try the pen light on the cap bill trick, thanks Charles!
@toddtedder2059 2 жыл бұрын
Nice to see how you removed the old carb bolts. That’s the way my dad showed me years ago to remove a fan from a water pump
@CLCIII 2 жыл бұрын
Great informational video for new builders! 👌 👏🏻 👍🏻
@other_fake_name2866 2 жыл бұрын
I'd love to see one of the old go karts converted into a designated wheelie go kart, that'd be sick. Keep up the awesome work!
@r.j.7898 2 жыл бұрын
So happy for the laser addition finally. Good job guys
@Tacosgalore24 2 жыл бұрын
Lol finally got a laser setup.. Been saying for years you can get IR lap timers for dirt cheap, but I'm glad to see you guys are going for better precision 😉😎
@neonnerd1364 2 жыл бұрын
I think you guys should find a nice day where the track is dry and run every vehicle on the gp list again so all the times are accurate. Also we'd like to see that video no matter how long it is.
@Kuzify 2 жыл бұрын
I know I can't prove it but I totally guessed 1:05. Awesome video. Thanks y'all!
@justinlee2415 2 жыл бұрын
I loved this video! Thanks for taking the time to explain the tips thoroughly!
@evank8459 2 жыл бұрын
Absolutely! I really appreciate the explanations
@BennyTygohome 2 жыл бұрын
The inner workings and your explanations are interesting and helpful
@DustinDegler 2 жыл бұрын
Miss the small engine days when I raced go karts, guess I better find a cheap kart again haha Bring more of the T4 kart videos!
@rodzillagene8525 2 жыл бұрын
Finally get to watch it on time guys usually I can't get enough service to watch till later
@ccgarage5869 2 жыл бұрын
Ike mentioned fracture rods aka crack rods it’s absolutely amazing the new engine building techniques that have come out the past few years
@justindeloach6732 2 жыл бұрын
This was a nice refresher video. Thanks bruh
@hunterconley2988 2 жыл бұрын
The new track addition is awesome!
@andrewzaleski8636 2 жыл бұрын
Charles did not wanna give up that governor to Ike when they were trying to remove it 😂😂 I love the enthusiasm
@cconnon1912 2 жыл бұрын
Great lighting on the new vids!
@matthewkrueger6493 2 жыл бұрын
Yeah, the fractured rods are crazy.They come whole as a replacement part. I get to crack them then install. Seems sketchy but they are beasts.
@MadsWorld34 2 жыл бұрын
i just tried sand for the first time ever today on my little trail 125 and i made sure to hit it all. and it did great at least to me but i never ran sand on a bike before. and that mini bike is bad ass good all around.
@thepiedish903 Жыл бұрын
I see that buc-ee's sticker on there. As a Kansas boy when I visited my fiances family that was my one demand that I had to see it. I was not let down. Oh and that drag cart looks cool hanging up there. It would be cool to have some lights under it. Like some LED strips. Call it production effects or something Hollywood.
@richardsteele6776 2 жыл бұрын
Excellent episode. Looks like a fun ride.
@BenjySparky 2 жыл бұрын
C and C y'all rock! Love the channel and content! I'm here for the algorithm! Peace
@crazylife6319 2 жыл бұрын
thank you ike! i now know how one of those governers work and ive wanted to know that for years lol lil peace of mind goes a long way when you tinker a lot of your friends bikes n what not. love yall chemistry. dont change!!
@Questionable_creations 2 жыл бұрын
i had a stock 168f with a mikini on it , it was a beast and ran way longer than i expected, until the rear seal blew out and it siezed from lack of oil,
@holleyciggy 2 жыл бұрын
When checking/adjusting your valve lash, keep a bottle cap of oil close to dip the end of the feeler gauge in before you check lash.....the resistance you get using the gauge dry vs. With a coat of oil on it can and sometimes will put your adjustment out.....
@cliffcorbitt9494 2 жыл бұрын
I wheelie my Coleman 2021 mini bike all the time. I even put pegs on it like a bicycle so I can balance it better than putting knees on the seat but all I really need is a lower gear sprocket so the centrifugal clutch will kick in faster and do the wheelies correctly
@CRAZEDX100 2 жыл бұрын
The clutch engages based on engine rpms and has nothing to do with the rear sprocket
@billymanilli 2 жыл бұрын
8:45 ish.. Just want to throw a quick warning out to everyone who uses a hammer to remove flywheel. DO NOT hit the flywheel, itself. It can crack it, and it becomes a ticking time bomb, just waiting for that "special" day. If you must use a hammer, do EXACTLY like in the vid and take care to not make any contact with the flywheel. (and if you can, try a block of wood/hammer or SOFT hammer , such as brass, lead, etc... That usually works, too... just need "mass"). Keep up the great work fellas! Can't believe how this channel grew! Well, I can, actually.... it's great stuff!! Thanks! :D
@jstrawse 5 ай бұрын
use a dead blow hammer
@darploin5071 2 жыл бұрын
I just saw that wheelie out of the corner of my eyes where it basically folded in the back Fender that was awesome Charles
@bigjay6743 2 жыл бұрын
I have the same bike. I bought some after market tires and it made it so much better gave it so much more control those tires that come with it they kind of suck.
@trumpfancardanostakepool4737 2 жыл бұрын
Really cool format to watch.
@OLDMACK 2 жыл бұрын
Charles "Shaggy" did a butt bump and was really shocked, Cars and Camera has a winner with Charles because he reminds me of my 5 boys before they joined the military,, they could build anything with just pliers and a vice grip
@drgti16v 2 жыл бұрын
Charles with his dank nooners!!!!!
@handiman5001 2 жыл бұрын
Very enjoyable video guys -- nice budget build
@davidowen888 2 жыл бұрын
Great Job guys 👍
@eugenesbackyardrepair4593 2 жыл бұрын
Ok you say you like the Go Power Sports fuel lines.Wait until you get whatbu sent you because it might be second on your list of favorites. Love the build video and can't wait for drag of the mini bike and that 670 two stroke gocart beast
@bensymington5550 2 жыл бұрын
Awesome very good build
@straightvaping4190 10 ай бұрын
What a great video good job guys
@Chris-cq5dy 2 жыл бұрын
Nice fast bike great video Great show
@edsonkidwell2522 2 жыл бұрын
Great video guys I would add a tiny tach to see but rpms maybe just bumped 5k like twice
@badcompany3057 2 жыл бұрын
Nice work!
@jstephenallington8431 2 жыл бұрын
You guys make this look soooooo easy! lol! I'm loving the details that you're putting into the video about the engine work, it gives me an idea about how to do one of these myself. Great work as always! ( p.s. who's the new camera monkey? they're doing a great job!)
@nickmyguy8232 2 жыл бұрын
i love these videos so much
@Mustangguy9702 2 жыл бұрын
Ike @14 minutes you talked about cracked rods. It's a 90s technology for the powered steel rods. It's called Cracked Caps. The big end of the rod is broken. That break means the rod can only go back together the way it was broken. Down to micro scope level the various cracks make the rod stronger. When the rod is assembled you can't see the seam like you can on CNC stuff
@lactosefarts7963 2 жыл бұрын
Ikr you were talking about the one piece rods. I have those on my 2j. When I first got them in I was so confused. But yes they are very cool
@spicydeath82 2 жыл бұрын
you guys should get one of those front disk brake kits from gps for his coleman. while gps only has the mb 200 kit, it apparently works also on the coleman from what the reviews on the site have said. i'm planning on snagging one for my coleman before i do any engine swaps.
@fusoya777 2 жыл бұрын
It looks like they took my suggestion and got rid of the lap time by hand. This is great. More accurate by far
@tristanmcnabb2741 2 жыл бұрын
Wow 😳😲 that motor sure has got some good power
@Z_732 2 жыл бұрын
Good vid guys!
@andrewklahn7899 6 ай бұрын
Get the timing marks lined up you can pull the gear out you can also put paper towel shop towel stuff them in there it will hold them in place
@liameverything4444 2 жыл бұрын
Best channel ever
@LoftechUK 2 жыл бұрын
So cool. Let’s upgrade more
@jameswarren423 2 жыл бұрын
Pretty sweet little beast 👍🏼🤩💪🏼
@michaelblacktree 2 жыл бұрын
I like how you setup the track with braking zones and apex markers.
@Cereal_Killr 10 ай бұрын
That's the cam sayin... "hold my beer!" on that wheelie lmao.
@stevenanderson8212 2 жыл бұрын
Awesome! Torque monster!
@user-dc5ql3jf7j 2 жыл бұрын
Wow they finally have charge system for 212 i seen them befor on those dtv shredder things but were hard to find. redbeard had video on it to
@davekauffman8727 2 жыл бұрын
That Coleman minibike looks like a beast, I love it, the only thing I might try is a 440 cc snowmobile engine. That would be even more scary :-)
CarsandCameras
Рет қаралды 416 М.
CarsandCameras
Рет қаралды 557 М.
CarsandCameras
Рет қаралды 564 М.
CarsandCameras
Рет қаралды 1 МЛН
Антон Маляр
Рет қаралды 1,8 МЛН
ПОТОК AI
Рет қаралды 3,5 МЛН
Макс Ващенко
Рет қаралды 1,2 МЛН