Timing Chain Replacement Big Block Chevy

Рет қаралды 82,898

6 жыл бұрын

In this weeks video Budget Build Garage explains how to replace a timing chain on a big block chevy. Installing a timing chain usually requires a gear puller. In this video we use a snap-on gear puller to replace a timing chain, as well as a harbor freight gear puller. You'll the learn the right way to use a gear puller, and which gear puller is the best to use from the harbor freight 4 piece puller set.
Get some gear pullers here: amzn.to/3c7ytrt

Пікірлер: 56

@BudgetBuildGarage 6 жыл бұрын

What are your thoughts on this big block engine? Are you a fan of the red?

@charliegoldman4624 6 жыл бұрын

I like the red. I don't really like when people paint them orange.

@greggbarry4138 6 жыл бұрын

I like black but it is hard to find oil leaks so red is the second best choice.

@BudgetBuildGarage 6 жыл бұрын

Glad you like the red. I think Orange can be cool depending on the car.

@djhightopfade4940 6 жыл бұрын

The red is cool. If I was to build a motor, I would probably go with a matte red if it exist.

@BudgetBuildGarage 6 жыл бұрын

DJHighTopFade That would look really cool.

@nickrodriguez7293 21 күн бұрын

I like your style. Keep up the good work. You have saved many grown men who were in a jam with these motors. Knowledge is power.🤓

@racer67 5 жыл бұрын

67 thumbs up...like the year of my impala...67! Diggin the ducktales shirt,,used to watch it wen i was a kid!

@BudgetBuildGarage 5 жыл бұрын

Thanks man! I love the 67 Impala. I've been looking for a 4 door 67 off and on for a while now.

@greggbarry4138 6 жыл бұрын

I like that tool you use to press the gear on. It made it look easier than just hitting it with a hammer until its full seated.

@kirtv1 3 жыл бұрын

Very impressive. Love the detail and the recommendations along the effort. I'm working on a top end kit for my SBC and the detail you provide is essential. Great job.

@sheldonvanek9791 5 жыл бұрын

love big block chevy's and their orange too!

@jjmccloud 5 жыл бұрын

Red is always a win bro! Just painted my sbc 350 Red with chrome and alum parts

@truckandroll989 4 жыл бұрын

Im digging your video very well done. Keep it up. Im documenting a big block build myself on my channel and will need to swap the cam/timing chain/sprocket here shortly so this was a great refresher.

@stormwickham1675 3 жыл бұрын

This video is a great help even if its a big block and I'm building a small block 305.

@r.d.ontheroad-1094 5 жыл бұрын

great job,thanks,

@eastwoodisme Жыл бұрын

Awesome videos. Thank you for showing an up close detail. I noticed your block as the holes for a retaining plate. Have you considered a Gen VI step nosed roller cam? With the retaining plate you won't need to mess with the thrust button nonsense.

@mikejeffries7794 6 жыл бұрын

That is an awesome Duck Tales shirt!

@BudgetBuildGarage 6 жыл бұрын

Thanks man!

@ericstephenson9924 2 жыл бұрын

Do you have to take the oil pan off to replace the timing chain? Also, if the engine wasn't at top dead center when the distributor was removed could it cause problems? I'm doing these repairs on a motorhome with the engine in. Thanks and great job!

@beefcattle1543 Жыл бұрын

Putting a barebones lunati cam in my 454 mark v. 476-501 lift. Supposed to be a stage 2 rv cam. All stock valve train. Ever run one before? Thanks

@marshallgreen9183 2 жыл бұрын

Need to where to put transition fluid in a 2004 passage vw

@Zay-zr2tn 3 жыл бұрын

Where did you get the tool to push on the gear?

@alexjr5565 5 жыл бұрын

Building my first BBC 402. What's your thoughts on the double roller timing vs the gear drive? Going in short bed pickup and want it to be a weekend driver as much as possible. Not going to be a track truck. Good videos thanks

@peterbuilttough3406 3 жыл бұрын

Gear drive is louder I like the sound, some don't, I believe they're more expensive some say they're stronger too.

@togodbetheglory9725 Жыл бұрын

I would love to see you doing it inside the hood bro,,,

@nv1493 2 жыл бұрын

I prefer not to beat the snot out of the gear, not good for bearings especially thrust bearing. Good use of that tool, its worth it.

@johnnyohman8847 3 жыл бұрын

Notice the heads don't have the camel humps anymore. The yellow ones. Please explain why they are so cool there 202

@rob99rst 5 жыл бұрын

shouldn't both dots be @ 12 oclock for tdc number 1 cylinder compression?

@kevinheine2152 4 жыл бұрын

yes

@peterbuilttough3406 3 жыл бұрын

Nice vid! Easier way to adjust timing without taking off bottom gear. Lol!

@chrisdenisewood3384 5 жыл бұрын

This guy makes everything look hard, hahahaha

@VictorTorres-cj8we 2 жыл бұрын

Red and blue

@andrewmurray6772 6 жыл бұрын

hey guys, yep, the red is good, it's different. What are the plans for this engine again ? Cheers from Australia :)

@BudgetBuildGarage 6 жыл бұрын

We want to build it piece by piece. For now we are just doing the essentials to see if we can get it running in the El Camino. If it runs then we will replace the cam and see if we can make it faster. Then the heads and after that we will see.

@andrewmurray6772 6 жыл бұрын

well mate, if HRG can put a diesel in an El Camino, i'm sure a big block Chevy won't be a problem...lol :) Good luck ! :)

@BudgetBuildGarage 6 жыл бұрын

Thanks! Hopefully we will have this in and be doing burn outs very soon.

@space_pear4239 Жыл бұрын

Any input on why some crank gears are marked in the valley of teeth, others are marked specifically on a tooth. Can anyone point me towards information on this phenomenon, the internet returns nothing no matter the keywords used

@mrblanche 2 жыл бұрын

Of course there was a cam in it. Here's a lesson in listening to sellers. If he didn't say "a performance cam," all he was doing is telling you the bald truth.