Tiny Cyberdeck Made With The Atomstack X30 Pro

Рет қаралды 27,381

Күн бұрын

Today we'll build a tiny cyberdeck from plywood sheets using the Atomstack X30 Pro. This is Atomstack's new flagship gantry-style laser cutting and engraving machine with a powerful 6-core, 33W laser module. The Cyberdeck uses a Raspberry Pi and Hyperpixel 4 display along with a repurposed Blackberry keyboard and trackpad.
ADDITIONAL INFORMATION
---------------------------------------------------
Check out the new Atomstack X30 Pro on their web store - bit.ly/3EX29GU
Visit my blog for the written build guide and to download the CAD files - www.the-diy-life.com/make-a-t...
Visit my blog for my written review - www.the-diy-life.com/atomstac...
PURCHASE LINKS
---------------------------------------------------
Raspberry Pi 4B - amzn.to/3l9uZNm
Hyperpixel 4 Display - bit.ly/3EZUS9D
32GB Sandisk Ultra MicroSD Card - amzn.to/3Qe6ObL
Blackberry Keyboard & Controller - bit.ly/3yfnPdS
M2.5 Button Head Screws - amzn.to/3XzMtQO
Short USB C Cable - amzn.to/41LqNnS
Tool & Equipment Used:
Atomstack X30 Pro - bit.ly/3EX29GU
Atomstack Honeycomb Bed - bit.ly/3Youk8w
Power Meter - amzn.to/3JIRWB7
Some of the above parts are affiliate links. By purchasing products through the above links, you’ll be supporting this channel, at no additional cost to you.
CHAPTERS
---------------------------------------------------
0:00 Intro
0:47 X30 Pro Unboxing & Setup
3:50 Test Cuts & Engraves
5:55 Cutting The Cyberdeck Components
7:29 Assembling The Cyberdeck
10:48 Testing The Cyberdeck
12:13 Other Materials
13:52 Final Thoughts
If you've got any ideas for Raspberry Pi, Arduino, or other Electronics projects or tutorials you'd like to see, let me know in the comments section.

Пікірлер: 48

@dav1dsm1th Жыл бұрын

Very cool. If you added a LiPo pouch battery under the keyboard (with a deeper enclosure) it may balance the weight of the screen better - and make it completely portable.

@MichaelKlements Жыл бұрын

Yes, I think some form of battery pack to make it truely portable would be a great addition

@ParshvaPatel-ib9lm Жыл бұрын

@@MichaelKlements I have an old smartphone lying around in which I installed raspberry pi os but is it possible to add gpio pins to it using an otg board like ft232h as getting your hands on raspberry pi si very hard

@user-ko4zb1lp3y Жыл бұрын

@@ParshvaPatel-ib9lm which phone do you have and how did you did ? Can you make an tutorial of it

@user-ko4zb1lp3y Жыл бұрын

@@MichaelKlements you could add an smartphone battery 5000mah or tablet battery if it could fit..

@ParshvaPatel-ib9lm Жыл бұрын

@@user-ko4zb1lp3y Jai shri ram . The raspberry pi os is not available anymore but this is ubantu based on bullseye therefore it is almost same kzfaq.info/get/bejne/oNylqMmBvLGqY58.html

@kenrq63 Жыл бұрын

Very cool, Michael, well done 👍

@haydenc2742 Жыл бұрын

Build a box under the honeycomb thing..then run a vaccum/shopvac into that enclosure...it will pull the smoke down into it then outside...instead of it just blowing it around your shop Cool upgrade and it does well! Keep em coming!!!!

@MichaelKlements Жыл бұрын

Thanks for the suggestion Hayden. This works if you're cutting all the way through the material in a single pass but for thicker materials that require multiple passes, the smoke doesn't make it to the bottom until the laser breaks through.

@haydenc2742 Жыл бұрын

@@MichaelKlements It still should create an airflow that will pull the smoke down and out...But yeah, if not cutting thru it blows smoke all over huh

@X-zy5fe 5 ай бұрын

Idea, wrist mounted cyberdeck

@anicetomaldonado Жыл бұрын

I likes it. Only change I'd recommend is some stain for the wood to add character and warmth.

@-someone-. Жыл бұрын

Everything you make is awesome. If you wanted to tweak this, I’d add some sort of led rgb lightening around the bezels (for night time recon missions) and a lithium battery to make it truly portable. Oh, and there’s always room for a camera...somewhere 😅👋

@MichaelKlements Жыл бұрын

Thank you, yes a battery to make it truely portable would probably be my first upgrade!

@williamalbertson78 Жыл бұрын

nice!!!!! love it nice work

@billnoname8093 Жыл бұрын

I like that a lot, definitley a battery, I have a pi 4 siting , it had another purpose but I did something else, so I may think about doing something similar.

@dr.benjaminbird7631 Жыл бұрын

For a more seamless design, you can use the USB C (USB 2.0 on he broadcom processor) input on the pi for the keyboard, and power it from the gpio header :)

@C4mpblor Жыл бұрын

These open style lasers freak the hell out of me. A stainless sheet provided?! Bouncing that light all over the place no doubt

@MichaelKlements Жыл бұрын

An enclosure is definitely something you'd want to get if your using one of these often - for safety and ventilation

@shaneliu-2023 Жыл бұрын

If you use it for a long time, it is recommended to buy a closed protective cover - FB2

@Ch1cago_Bears Жыл бұрын

Maybe make the bottom thicker and add a battery for that portable use. Then the power can plug in the bottom half and still use as desktop.

@AhmadHossamMahmoud Жыл бұрын

Great ❤

@PeterHedenberg-wi7mm 6 ай бұрын

soooo very cool

@vynayakin 10 ай бұрын

is there any way to get that casing online ? i cant afford the x30 pro ..

@iblackfeathers Жыл бұрын

the hyperpixel requires spi and i2c pins so i could not use it with my project that required dedicated and exclusive spi and i2c. i too have the square version lying around for over a year. my other rectangular one is on the rpi 400.

@MichaelKlements Жыл бұрын

You should still be able to use I2C devices with the Hyperpixel display, but yes it uses all of the GPIO pins so you'll lose the SPI interface as well.

@NoChoke Жыл бұрын

Where do you get the laser protection glasses you showed in the video?

@MichaelKlements Жыл бұрын

The ones that I have are from Dioptika

@jqegermv3592 11 ай бұрын

The x30 pro is a powerful machine but is not very sharp engraving small letters as the A5 pro +. I have both machines and i notice this problem.

@Elementorandmore Жыл бұрын

Will the laser cut 0.5 mm carbon fiber? It would be great to see if it will cut it. Thanks for the videos!

@MichaelKlements Жыл бұрын

I doubt it, you’d probably need to use a CO2 or Fibre laser to cut carbon fibre sheets

@Elementorandmore Жыл бұрын

@@MichaelKlements Ok thank you. My s20 pro will cut 0.4 carbon but takes about an hour to cut a small 2 inch square part.

@repairestore Жыл бұрын

I don t understand, the trackpad from the keyboard works?

@MichaelKlements Жыл бұрын

Yes the trackpad and keyboard both work

@cameronrich2536 8 ай бұрын

Can I pls have your old laser

@Tamay. Жыл бұрын

Repurposed blackberry keyboard? Sad to see the phone itself be gone

@MichaelKlements Жыл бұрын

Blackberry have ceased all support for their software as of January 2022 so these are essentially paperweights

@Tamay. Жыл бұрын

@@MichaelKlements Blackberry world and Blackberry maps is gone, these were shit, you can still make calls, texts, even browse the web with Opera Mini. Blackberrys are still useful at least to a collector like me

@Apperrxx Жыл бұрын

Can you make a gaming setup with raspberry

@MichaelKlements Жыл бұрын

What would you like to see in a Pi gaming setup?

@Apperrxx Жыл бұрын

@@MichaelKlements play genshin impact gameplay and a video edit if possible

@MogoVFX Жыл бұрын

I DONT RECOMEND TO BUY ATOMOSSTACK AT ALL GUYS!! I HAVE THE PRO 20 MODEL AND I CAN SAY ITS BAD!!

@MichaelKlements Жыл бұрын

Can you share what you don't like about it?

@MogoVFX Жыл бұрын

@@MichaelKlements Honestly whats not good hmm: Long list of bad stuff is coming so read it. 1: The strucker itself is bad and how all cables etc are blocking etc! 2: No software to use the Laser and they have is like for kids! No advanced options etc! 3: if you remove the sd card during print it stops! 4: Hard to find the starting spots!! specially small objects etc! i wont recommend to pros! 5: cant even cut in one pass the 4 mm !!! i have tried many times in full power!! 6: Super noisy! 7: lowering the laser to right level etc !! ill do video of this soon so be tuned bro. your videos are great but not the product bro!

@MichaelKlements Жыл бұрын

Thanks for sharing your thoughts on it, it's always good to get someone elses perspective on what issues they have run into. I agree that the cable management on the X30 (and other Atomstack models) could definitely be improved. The other issues you've listed are common to all of these style machines, do you have a brand/model that you use that you think does a better job? In my experience, no-one likes the software bundled with any brand's machines - which is why software like Lightburn has become so popular.

@MogoVFX Жыл бұрын

@@MichaelKlements bro trust me no improvements!!! only laser is more powerful but if x20 pro couldn't cut 4 on full power!! it supposed to cut in one pass 15mm!!

@parshvapatel8484 Жыл бұрын

@@MichaelKlements I have seen that it is possible to install linux on old smartphone but is it possible to make it into partial raspberry pi by adding raspberry pi pico to the phone or add adafruit ft232h