*Good price , Heavy duty Works great **MyBest.Tools** on cement and brick work.*

Thank you- bought this drill after watching your excellent straight to the point tutorial. REALLY HELPFUL THANK YOU

Really useful review. I’ve brought my first ever Titan as I’m renovating my flat and fixing shelving and cabinets to walls which have proved to be tough as nails on my old hammer drill. Feeling a bit apprehensive about using an SDS drill for the first time this review has show how they work and how good they are at getting the job done. 👍🏻👍🏻👍🏻

Great video! Just bought this Titan SDS and feel confident now after watching your video. I like your no waffle presentation. Thanks a lot. 👍

Very effective and useful demonstration of the drills ability in real world materials thanks for the upload I was just looking for a new drill went to screwfix saw this Titan drill then came to youtube and luckily you had an upload thanks for the work and the honest review that helped me make a buying decision .

Good review. I’ve had one of these for a while, as I have a series of wooden fence posts that are set in concrete and are rotting, and need replacing one by one. The Titan is brilliant at this and has served me loads of money. In addition, I’ve used it for cleaning off rust scale, and - not something I’ve seen much about on KZfaq , but incredibly useful - it can be used to crack nuts that are really stuck on. This is especially true of UK style immersion heaters. You cut a notch in one face of the big nut with a screwdriver or cold chisel, put the SDS chisel into it and it cracks the seal, with no danger of tearing the top of the tank. It can also be used on stuck tap valves. Altogether a brilliant bit of kit, especially for the price.

I've been looking for an SDS drill, your review has made my mind up, thanks.

What an honest, pertinent and wonderful review...

I bought this today after watching your review, very pleased thank you. £50 from Screwfix, with 5 x SDS plus masonry drill bits (6, 8, 10, 12 and 14mm), 2 x chisels (flat and point), pair of carbon brushes and carry case plus a chuck so plain drill bits will fit. 2 Year Manufacturer's Guarantee, Smashed up massive concrete lumps on the ends of concrete post. already paid for it's self.

Thank you, I was looking for something to help take plaster off a wall for my new restaurant to expose the brickwork. This is what i'll be buying this week!

Brilliant video Steve. Been considering buying this drill for a week now. After watching this at the price its a no brainer. 👍

I have owned one these drill for about 6 months and honestly is the most versatile tool I own. I tile remover attachment and it works great, also bought a paddle mixer attachment with M14 adapter and use it to mix full bags of cement and plaster. Also use this for chasing wall socket and wires.

Really appreciate this, i was looking to see if i should get this one and for precisely the curtain issue you mentioned so you solved two of my dilemmas. Spent all afternoon not understanding why i couldnt make a hole deep enough for a 6mm plug

I bought one of these from Screwfix about 10 years ago, it looks pretty much the same and is still working well with occasional use. Made many holes in walls for power sockets with it. Horrifically noisy - I always wear ear defenders!

I didnt want to fork out too much but needs something that will do the jobs, this is perfect, thanks steve

Fab Steve, I have this drill and this has explained a lot. Thanks! Subscribed, Nik 😀

Great review, with a variety materials tested for the drills capabilities, I shall buy one.

I bought this last week after watching your review and didn't really expect much for the low price. I'm genuinely surprised and impressed with it. My house has solid walls and this flies through them with precision every time. Bargain....

Best review ever, Thanks from ireland.

Brilliant straight forward review

Brilliant video, love my Titan power tools, and off to buy this one tomorrow. Thanks!

I've had mine a couple of years, done loads to our house and garden with it and its still solid. We bought a set of makita bits for it and it's a different animal. As a heavy duty home drill, its and absolute bargain IMO. Haven't regretted buying it for a second.

Very informative. Buying a 1930s semi that hasn't been touched since a 1970s extension addition, so I'll be needing this then.

Thank you! Just got my Titan SDS and was a bit intimidated tbh but youve shown its easy enough to use. Im off to chisel the rendering off an outside wall now

Top man Steve!, had some work being done and someone was using one, and i thought I'll get one, more for the chisel than anything else, couldn't believe the price of these things, amazing, anyway, good review, as lots of little functions i wanted to know about, Cheers

Best video on this model on KZfaq 👏🙏

I used one of these to brake up concrete around fence posts when renewing our fence. Contractors wanted a fortune to replace the fence so i paid £60 for this tool & done it myself. Worked a treat & paid for its self on one job.

Absolute monster of a drill

Thanks for that I'm gona pick one up tomorrow

Very good demo

Thanks for the review. I've made mind up to purchase one of these for a task have to complete in my garden.

Great review, I have lots of jobs to complete during and after renovation, with my usual cordless set which isn't doing the the job I was concerned I would have to spend ££££ lots of money to get the right tool for the job, but I think I've just find it Thanks very much.

I bought one of these after spending ages blunting and snapping drill bits, getting nowhere with a normal electric hammer action drill. I blew out a hole, I wobbled and made a hole to big, I sweated and I swore. The next time the Mrs asked me to put up a new blind I bought this Titan SDS drill, it sailed through with ease, no sweat no blood no swearing it's heavy but you only need it for 30 seconds :) best drill I've used when you can't get a decent dewalt drill bit to bite into the wall. Also been used to chase a wall for cables, cut out a back box and even tried to use in the garden recently breaking some concrete, ok it's 9" thick and this drill as a breaker struggled so will be looking at a proper breaker for this summer. Apart from that well worth £50

Thanks for the review Steve. Was looking to hire tool to drill a drainage channel in an exterior brick wall, but for the price of these Titans i'm gonna buy one. It's not that much more expensive than hiring one.

I bought a titan, wow should have got one years ago. Chiselled concrete and broke a wall down was easy. I've got cordless Dewalt powertools and was going down that route but i read the reviews 😢, so decided on the corded titan which generates a mighty 8J of impact energy which is 4x what I was going to buy. Glad I bought it, corded doesn't bother me as I'm a DIYer. Its powerful, reliable and cheap 👍 what more could you want

Lovely, thank you.

I have this one believe me it works excellent 👍

Great review Steve, just goes to show you don't have to spend £200 - £500 for a drill with decent power. Seems reliable enough from countless reviews and if stolen it's not going to break the bank. See it's an alternative to hiring, so after a couple of hires you end up with a tool which will inevitably be used in the future again and again.

Well cheap for the price, And good quality, And excellent Demo

Thanks. Can you put the chisel in rotated 90 degrees to the way youve shown. Would be better for taking tiles off walls

Excellent review. No babble. Im off to get one right this minute ;0)

Greetings, Thank you for sharing this. Regards, Christos

How do you change the head and want to see it dril solied metal what the gold one used fir and the metal one

Good review Steve! Thanks..it made my mind up to deffo buy one..and at the price from screwfix its a bargain!!

Yea great drill I too went out and bought this drill after watching this review. The problem I'm having is getting hold of the drill bits. Especially the smaller ones. There is a big difference between MAX DRILL BITS and MAX DRILL BITS PLUS . You can however buy the adaptor for your MAX drill to convert your drill to the MAX DRILL BITS PLUS which you can pick up the bits a dime a dozen. But once you buy the adaptor accuracy is no longer guaranteed.

Thanks for the video, very helpful. Does this model have "roto stop". Not sure what it means but many chisel bits require it. Screwfix were not vey helpful

Very nice video what drill bit do I need size and length I need to drill from.ouswd striaght thought inside of the house so I can install light fitting outside and cable wire to inside switch .also which thickness and protect wire I need it a general double lighting thanks

Thanks - great demo, in both senses of the word!

Ive been looking at one of these. Im a tradesman who occasional would need the kangoo side of this drill.. the 110v ones are a bit more expensive

Got to say I was trying to drill on one of these with a regular hammer drill I went through a couple a drill bits !!!! thought I was losing it !!!! then I bought a SDS ,,, its like drilling through WOOD

Hi thanks for this video. I've been looking at SDS drills online and been trying to find the best value for money one. I need to drill an approximately 1 m long drainage hole through concrete, so need a good drill and long bits to go with it. I also may need the chisel function. I see some drills need grease for the chisel function- is the titan the same? Is there a grease reservoir you have to fill? Cheers

I've got one of these. Can't fault it.

Would this be good for taking up ceramic floors tiles on my kitchen floor plus the old adhesive?

do you need titan specific chisels for it? id like a wider chisel and dont know if it has to be only titan ones that fit. thanks.

I have used a Bosch since 2005. It's like a knife cutting through butter. Normal drills are like, scratching with a tooth pick.

Great video 👍 I wanted to ask if you would recommend this drill to remove bricks from chimney breast. If so, will I need to buy any additional attachments/bits?

I'm hoping to dig some old fence posts out which are in a lump of concrete post mix. Do you think the breaker function will be up to it?

Hoped to see the standard chuck supplied with the drill being used. Oh well....

Thank you for the video Steve. I'm a rookie when it comes to drilling concrete etc. If I need to drill a hole through concrete, stone or brick, what can I do to ensure that the brick/stone/concrete doesn't break apart upon the drill exiting the material? For wood I was told you have a backing piece to stop the tearing/splintering, but obviously you can do that with walls. Cheers!

Great video...just bought one from screwfix

I had something similar and it gave up after good few years of heavy work. I like this one except for weight. Is there anything else more expensive but with similar power? I need chisel power more than drilling. Good review by the way.

Very capable.

I've bought this specifically to chain drill.Then, I will use the breaker to break apart the roof, its an old pre fab shed that has double thick roof.

Stupid question, but in hammer mode to chisel/break through concrete, without the chisel bit connecting to the concrete does the bit move up and down or only when it’s pressed against the concrete? I just got a similar one and want to make sure it isn’t broken before using it

I bought this but the yellow leaver that changes from normal to hammer fell out

Hi Steve great review thinking about getting one , il be drilling into concrete gravel boards if it hits the steel in the concrete will it still penetrate through it …thx

Where is it manufacturered?

Hi Steve, thank you for this informative video. I have watched a few of your videos and I really appreciate how helpful and well made they are! I have an Einhell TC-RH 900 (900W) and its 4.2kgs. I have used it to drill 16mm holes in flat beach stones (3 to 6 cm thick) 6 to 15 cm dia. The rotary hammer drill does the job easily. However it often chips off a layer at the end. Is there a way to prevent that? Any other tips you may have to drill holes of 16mm through beach stones would be very welcome. Thank you!

Only thing im not sure about is how much pressure to you put on the drill when you're using the chisel? Do you force it into thing you're chiseling or just use some light pressure? I think too much pressure can cause them to burn out.

How do you access the grease pot. The manual says use a wrench ... do you wack it with a wrench? Do you heat the wrench up and us it to melt the grease pot's plastic cover? Do you wave the wrench at it and chant a magic spell? ...

Whats the size from tip of the chisel to the housing, I'm building a fence but there is blocks of concrete less than 100mm from the soil. Any advice is welcomed

I'm thinking of buying one.if you were buying again would you still go for the titan or another more expensive model?

would it be a good idea to clean and grease the old drill bit shaft slots?

Hi, I'm trying to drill a small hole in a (presumably concrete) wall which my normal hammer drill won't go through. The instructions for this SDS drill say that the chuck cannot be used with the hammer function. Does this mean I'll need to purchase a small SDS drill bit to do the job?

i often use mine to break up concrete in bottom of fence posts, works fine, take a about ten minutes,

Just been bought this. It's for general home use and thought it too much for my needs, but I have a small cordless drill/driver for normal use and was planning to use this sparingly when the need was there. Looks like concrete lintels are no problem, but I'm concerned that it may be too big and cumbersome for normal DIY use but a comparable non SDS hammer drill is either not very powerful, or way more expensive. Is this drill overkill for home use? Or ok seeing as I have a small one to complement it?

bought one of these ,,i,ve noticed when i take the bit out of the chuck especially after i,ve been using the chisel function theres oil on it ,any idea if this is naturally or is there something wrong with it ,,cheers

Hi Steve I need a new SDS drill and was Looking to use this product with a 40mm diamond tip core piece would you recommend it’s up to the job?

Very nice review. Have you found that the weight (6kg I think) is a bit much when you're drilling or chiseling horizontally where you have to take all its weight?

does the drill get hot and what is the differences between the new one a this one because they both have 1500w and 8 j of power

Titan is a brand of ScrewFix and should not be confused with Titan Pro, who make garden tools like lawnmowers etc. Titan tools are usually grey, green and orange/yellow coloured. Titan Pro tools are usually red in colour.

Nice video! I read reviews and some people complained about that chunk had been broken because too weak. Is it true?

My dewalt impact driver would not put bolts into the brick. Got peeed off and used this. Put in seconds and still standing 2 years later. Be careful tho. It's a monster.

One request when you shorten the sequences - put a little "time taken: 12 seconds" type of message on the screen. I completely agree with cutting things down when you're drilling for 10+ seconds, but it would be nice to know how long it took

A great drill which made light work on my wall, the instruction manual mentions keeping an eye on the lubricant (the 4 screws on the top of the drill) after approx. 5 hours use yet no video mentions it? Is this something you need to keep an eye on

Great video, would you say this drill was suitable for core drilling into concrete blocks?

Hi which one would be better for knocking off render the bigger one or smaller one ? Thanks

Would you recommend this for diamond core drilling?

Is there a means of altering the angle of a flat bit? My Draper breaker is fine with a pointed bit but its usefulness is limited by not being able to adjust the angle of flat bits and you end up having to hold the (heavy) drill at awkward angles.

Hi mate is it possible to dig out a small channel into concrete

hmmm yeah.. but what did you think of the book of words?

It can do the Demolition !!!! you just have to be gentle with it using it just occasionally for that

Good review. I like Titan tools, is the drill still going?

The switch goes faulty after a couple of uses, replacement can be found on ebay as bq refused a repair due to as what they claimed was use on a construction site!!!

Great review, really helpful. Only thing I'm left wondering is how is it using overhead? I understand it's very heavy, listed at over 6kg! Does this make it impractical employed overhead or have you found it still manageable? Many thanks.

Hi Steve, really good video. I have 3 rotten fence posts set in concrete. I want to remove 2 sides of the concrete socket, insert a new post and add new concrete. I have enquired about renting a larger 110 volt machine to do this and its about £50 per day including transformer etc. I really want to buy a Titan SDS drill but worried it won't be man enough to do the job. I only need it for this job of concrete breaking as already have a heavy duty drill for drilling holes. Do you recommend the Titan SDS drill for this task? Thanks very much.

I notice that you didn't show the addition of the drill chuck at approx 3:30

Have you used any cordless version and would you recommend any?

Can this be used as a core cutter for 1 job?

I always find the inclusion of spare brushes reassuring. It means the manufacturer has confidence that the machine will survive long enough to wear out the original pair. I use titan cordless drill, cordless multitool a 9" and 4.5" grinder at work. Never had a problem with them. Good tools to be fair!