Check-out all the other D-Max content here -> kzfaq.info/sun/PLloptHW8MGGhzVQRkJaMUeCIUh5ZEplfB
@adsmel58812 жыл бұрын
We got one of these colour coded and installed on our bt50 XTR for about 400 bucks more than a Hayman X bar installed so it was a no brainer for us.
@KPBoeck3 жыл бұрын
I awaiting for my D Max to arrive. Thanks to your video I will fit a TJM Rear Bar once it arrives
@Burden053 жыл бұрын
“In the bin” and “dak dak” - this guys a Might Car Mods fan 👍🏻
@VideoShowMeHow3 жыл бұрын
You know it 😉 Wondered if anyone would get those references :D
@waynem3638 Жыл бұрын
Hey Adam, mate I just recently installed my rear bar thanks to your video made it a lot easier and I did it on my own, great bit of kit. Cheers Wayne M
@lindseyarthur93052 жыл бұрын
Great video, very informative. Have saved for future ref. Thanks
@VideoShowMeHow2 жыл бұрын
Check-out the build series, there's a few vids there now 👍
@Warnut3 жыл бұрын
keep up the good work with the vids i like watching them its like a lil insider of how its done. also for people that do buy tjm as a lil bit of a help that arb and orher never do even though this video is very detailed and really well done. you can also download the installiation instructions straight off tjm if you need the extra assistance. as for me im still waiting on my tjm gear. but only coz i got them colour coded to the flares. Bit bummed out that the b-bar, rear bar and scrub bars from qld have been sent but have to wait 2 months for the side steps. and a wait on my under body protecting. alwell it happens.
@VideoShowMeHow3 жыл бұрын
Thanks for the comment 👌 Hopefully yours turns up soon
@sizlack0003 жыл бұрын
Another great vid thank you 👍
@PROCOPO3 жыл бұрын
Another awesome and informative video 👍🏻
@VideoShowMeHow3 жыл бұрын
🤘🤘
@t-strut81572 жыл бұрын
My man, awesome, liked and subbed. Keep up the great dmax content
@VideoShowMeHow2 жыл бұрын
Lots more on the way 👍
@JoeyDayeMusic3 жыл бұрын
Awesome vid! Thinking of doing the same to my territory.
@VideoShowMeHow3 жыл бұрын
Go the Territory!
@Drewderpderpderp3 жыл бұрын
Great work
@joshua-raymcnee22733 жыл бұрын
Can tell your single cause you have way to many tools haha legend well Informed cheers mate
@VideoShowMeHow3 жыл бұрын
Haha nah just a wife who understands my obsession 🤣
@joshua-raymcnee22733 жыл бұрын
She’s a keeper then mate looking at buying a couple of them cane toad tool boxes keep the videos coming I’ve got a 2021 dmax and rather do it my self 👍
@VideoShowMeHow3 жыл бұрын
@@joshua-raymcnee2273 noice. Yeah mate shooting for new vid every Friday arvo as a min :)
@kevwells3 жыл бұрын
I'm really enjoying your content, thanks for your work on these video's. That bar does look a little be more on the grey side then pure black, does it match the flares and roller cover?
@VideoShowMeHow3 жыл бұрын
Cheers! Definitely straight black, maybe just the video/lighting.
@andybryant9381 Жыл бұрын
Hi Adam, thanks for your videos. About to get one of these fitted to bt50 and I’ve heard there can then be possible space issues when changing the suspension and it’s shackles afterwards? Any thoughts on this please? Andy
@VideoShowMeHow Жыл бұрын
Nope no issues when I installed my outback armour lift
@Rcovry Жыл бұрын
Great video, I used it to find out how to remove the rear bumper section, so I could remove all my XT's sensors. Currently relocation them to my new tray. Just a question, you don't happen to know the hole size on tmyour new bar that the reverse sensors plugged into? I current don't have access to my tub to check.
@VideoShowMeHow Жыл бұрын
21mm, though mileage may vary depending on the paint thickness ☺️
@tylerjones38753 жыл бұрын
Did you notice any difference to the ride comfort between factory and the TJM rear bar? Did it make it any worse or better with more weight? Or no change?
@VideoShowMeHow3 жыл бұрын
Slightly better if say, little more weight settled down the rear a bit
@redbrickize3 жыл бұрын
You are super.
@MP-hf3jn2 күн бұрын
Hey Adam, I'm trying to find an extra bolt on recovery points for the tjm rear bar. Have you looked into it?
@VideoShowMeHow2 күн бұрын
@@MP-hf3jn I just use a recovery hitch 👍
@jackhewitt86144 ай бұрын
Hi mate I have fitted tow bar from Trailboss. I got it used from a car but the same car. But it used car didn’t have rear sensors I have thr model and harness fitted but now rear sensors fault when u discount Error go way. Any advise ?
@BenMitro3 жыл бұрын
Cool, did the grip plates come with the kit or were they taken off the original plastic bumper? What is the advantage over the standard plastic/metal bar (except for tow hitch)?
@VideoShowMeHow3 жыл бұрын
Came with :) Much more protection
@Candesce3 жыл бұрын
The hitch is also much higher up on the TJM bar. A few inches of extra clearance for offroading. If you're not going to be offroading... It's probably not worth the cost/weight.
@VideoShowMeHow3 жыл бұрын
Nice solid bar work under the tub too :)
@BenMitro3 жыл бұрын
@@VideoShowMeHow OK, I get the picture..thanks.
@Big_Boulders Жыл бұрын
Hey Adam. How did you get the paint off the 2 sensors or did you end up rubbing them back and painting them?
@VideoShowMeHow Жыл бұрын
No just have them lick over the top 👍
@julmanjumanaustralia42163 жыл бұрын
Great
@robertarmbruster56502 жыл бұрын
Another great video Adam, thanks. I am watching this vid again because I just damaged the RH side bumper on my October 2020 model LSU dual cab. I bought my vehicle with the IUA supplied canopy, tow bar and Isuzu branded electric break controller for towing our van. I am being weight sensitive now looking at gross GVM for towing. What do you think is the weight difference between the TJM rear step bar and the IUA tow bar assembly?
@VideoShowMeHow2 жыл бұрын
Hmm well the TJM bar comes in around the 66kg mark from memory, so you're probably adding around 30-35kg compared to the factory hitch assembly on the MY22s
@tylerjones38753 жыл бұрын
Hey Adam, roughly how long did it take you to do this install? Thanks
@VideoShowMeHow3 жыл бұрын
All day with filming haha. Normally though I would allow 3 hours. 😁
@tylerjones38752 жыл бұрын
@@VideoShowMeHow yeah it’s hard to tell with videos. Seems like it only take a a couple minutes but I can see why it would take ages for creating a KZfaq video. I’ll probably allow myself 5-6hrs because I’m a numpty. Wouldn’t attempt it but because your video is so easy to follow I’m giving it a go! Crossing my fingers I don’t f**k anything up 😂
@VideoShowMeHow2 жыл бұрын
Ahh you'll be fine mate 👌Just limit the beverage intake and you'll be sweet 🍺😬
@tylerjones38752 жыл бұрын
@@VideoShowMeHow ha yeah, good advice!
@jdoubles3 жыл бұрын
How the hell did you get one that was built in March??? I had a delivery date of May, and now I'm being told sometime between August and October, and then they can't even promise that! I'm being told I might have to wait until after October. When did you order?
@VideoShowMeHow3 жыл бұрын
Ah sorry to hear mate. I waited about 6 long months, ordered mid Nov Brisbane
@jdoubles3 жыл бұрын
@@VideoShowMeHow Good to see that the turnaround from build to delivery was rapid though. Loving the series. Will be catching up with the last couple of vids now. Cheers mate.
@TheScrawley13 жыл бұрын
Was wondering what this bars weight is , do you know. Cheers
@VideoShowMeHow3 жыл бұрын
66kg mate :)
@TheScrawley13 жыл бұрын
@@VideoShowMeHow thanks mate
@defyingravity84 Жыл бұрын
Hey Adam, loving the videos mate, super helpful! Do you know much the original step weighed? Wondering how much extra weight this bar puts on the vehicle? Cheers
@keironmeakin6733 Жыл бұрын
Hi Great video, do you have access to any more of the corner bumpers and parts, for 2022 Sappire blue mica code 565, as i have corner damage, many thanks Ron
@VideoShowMeHow Жыл бұрын
Cheers. No sorry gave away a while ago
@leonovlee2062 жыл бұрын
I really need the part... 😭
@muhammadfirdaus39683 жыл бұрын
nice modification..do you want to sell stock rear skirt?
@VideoShowMeHow3 жыл бұрын
Already given away sorry bud
@muhammadfirdaus39683 жыл бұрын
owh,ok..how to get new stock in your country? i'm from malaysia..malaysia and thailand market don't have the parts for x terrain model
@VideoShowMeHow3 жыл бұрын
@@muhammadfirdaus3968 new stock would be through a dealer over here, but they turn up on Facebook Marketplace etc. The X-TERRAIN is a bit different over there isn't it?
@scottfreeman3804 Жыл бұрын
I just installed mine today. I noticed that it was a very very tight fit for the plug that goes onto the radar unit, i had to modify the plug a little bit. Is that normal?
@VideoShowMeHow Жыл бұрын
Hmmm was a bit ago can't really remember sorry! Get it on ok and radar working?
@scottfreeman3804 Жыл бұрын
@@VideoShowMeHow yeah, had modify plug a fraction cause the bolt holding cover on was in the way. Yet to test it out