Just had an Anton pro 1 delivered from Hamiltons today, upgrading from my old Anton, this will be my third Anton at this stage. We're not in a race indeed, I'm certainly not, headin' for 70 and still installing/servicing/repairing boilers. A very informative vidoe. cheers mate.

I’m renewing my gas certs, I’ve been out of the gas industry for around 3 years, all of your information is on point and easy to understand 👍🏻

Top tips from a top engineer! Fascinating video with features to please chemists, mathematicians and engineers. Love it! Learned so much. Thank you Derek!

I'm a gas tutor too and I love your videos. Thank you for producing such great content. Please keep going Derek, you're the best on KZfaq.

I've only been qualified for about a month, I always refer to manufactures. I was taught be Anton and love it, but my employer uses the Kane. Great video, great reminder of carrying out combustion analysis. Thanks and keep up the great work, looking forward to Parts 2&3.

This was an incredible teaching experience. I missed this section on the course I’m attending so this has bridged the gap. Thank you so much.

Excellent video Derek I understand it better now compared to 1 year ago when I watched it, After getting your training and watching your videos you making us professionals. Thanks 👍👍😀😁👌

Thank you so much for all the videos you put up,it's been a great help especially for those of us who have struggled.

Thanks for your videos. I just study gas save engineer and through covid we didn't could learn so much as normal regards we where not allowed to go to college and my house move made it much more difficult to learn because I couldn't turn up to the online meetings. With your videos I can catch up very well. Thanks again

Superb Video Derek. The results from the FGA are finally meaning something to me now. much appreciated Andy Thomas Trainee

An superb explanation of both how to use an analyser.

The boiler might get to temperature within the 15 mins . It can be a pain .

You are the first person I have seen do a sweep test

By far the best channel out there. Great video!

Thanks Derek for brilliant video, Explained in very details. Bilal M tomkat trainee.

This the best I have seen on FGA

Thomas Bradwell Thanks Derek

Very good explanation. Thanks Derek. Polish Peter - trainee at TomKat😀

If Carlsberg did gas training need I say more, I'm lucky enough to be currently doing my training with Derek at TomKat.

These videos are absolutely brilliant, really well explained. Just going through my training now and these are invaluable to me. Thanks so much Derek keep them coming Mick

Hi Derek very good once again. Very well explained! 😁

Another great video, a lot of important and very useful information. I'll have to watch this video a few times for it to settle in the mind best way to understand the procedure. Excellent.. 👍👍 Tomkat gas trainee.

Hello Mr Derek Can you please talk about Tracing Gas Escapes and the method we should follow

That’s a very easy to understand information. Great video buddy. Thank you 🙏🏼🙏🏼

Hi Derek, great video as always. How do you keep the boiler running at maximum rate long enough to adjust the CO2 without it reaching temp or modulating.

Great video. Just one question. Why bother with a flue integrity test with the boiler on min fire?

Hi Derek, another easily to understand video from your good self, just one little comment and that is at 14:25 you stated that the Co2 was 5.2 when in fact you meant O2. I’m not being picky but when you are producing educational videos which relate to the safety of the public, you must make sure that you are being 100% accurate with you descriptions as some students may remember this information and use it in the field. Apart from that keep up the good work, we need more people like you to educate the new coming engineers.

Fantastic video Derek cheers pal.

Your video is brilliant bro.All way respect ur hard work...

Glad they still use the same menu as the older models

Thank you Derek. Great teacher good at explaining and simplifying things

Thank you for your instructional video’s, your explanations are always easy to understand and very thorough, I am a gas safe engineer but mainly fit cookers, hobs and fires/removal of, do you do a short course where I can brush up on the carrying out landlord certifications ?.

Best video you have done mate. Keep up the great work you do.

Excellent video thank you Derek Anton is the best.

another brilliant lesson 👍

Awesome vid

Very goog derek well done.

Whitch O2 and CO sensors applicable for Kane 400 or Kane 940 anyzers? Many thanks

Hello, why low CO reading when there is low efficiency? CO is practically unburned fuel. Why noncondensing boiler have low CO readings?

Great video .. I am learning alot

Brilliant video. You made it very easy to follow and understand for us beginners. Great tip at the end about doing the sweep test last and we’ll never forget to close the sample test point! Definitely going to take up that advice. From the top of your head can you recall the common boilers that have a chimney sweep mode? Thanks very much Derek 👍🏻 Asian Jon. Training

Cheers boss Mohammed Ali

Great video!!!! Thanks for these.

Great explanation 👍good man

Top vid.. nice one Derek 👍

Thanks again all good Deggsy.

Hi . I’m currently doing my ACS , I just want ask , what happened in situations where I cannot use the analyser because the flue point is inaccessible due wood frame or tight cupboard space ?? How you dealing with this situation? ID or AR ?? 🤔🤔thanks

Really enjoy all the videos' there's always something new to learn when you're doing gas. Love Tom's sense of humour .

Great video as usual 👍

Hi Derek great video ….will you always get some measure of CO in flue integrity checks ? I take it anything higher than 5 is a problem

have been watching your channel for a long time, I have baxi solo 2 pf the overheat lamp lights up and he does not want to turn on thanks for any help, pump ok work.

Do you have anything on fga testing on a gas cooker

Small but important point. The analyser should never be placed on the boiler case when taking full combustion test. Flue gas temperature. Gross minus ambient = net. By placing the analyser on case distorts the ambient temperature due to analyser measuring the case temperature instead of room ambient temperature.

Will you do course on boiler installs at all for new entries into Gas?

Had so many troubles with kane I've got 2 machines and from new nothing but troubles . This afternoon got to buy a new one as both machines can't be trusted.

Nice video that derek👍

Great video 👍👍

Enjoyed it 😊👍👍

Where in the regs does it say about condensing boiler being 0.004 and a non condensing being 0.008? I thought it was 0.004 for all appliances and 0.008 was a British Gas procedure applying to a boiler that's just been serviced.

Top man great for revision

What CO ppm is permitted during a sweep test? Thank you

What causes a highly efficient appliance to produce more CO than a less efficient appliance, given that CO is a product of incomplete combustion?

Please if you get 1 or 2ppm on sweepts test is that ok or not? Please let me know 🙏 Thanks Excellent video

Hi Derek, Is the co2 spec for this boiler not 10.0% +or Minus 0.2 ? you are at 9.1

Brilliant.

Great video👍🏼

Very helpful 👍🏼👍🏼👍🏼

Why does a more efficient boiler give a higher CO reading?

Hi Derek a reading of 0.0022 is usually high on a new boiler?

this teaching, explain really good. Bless you .

Do you find the tube from the probe on anton analysers becomes stiff over time? Mine is really rigid but I'm not sure if a new one will be any different...

Derek what if a reading of CO2 was higher than allowed tollerance in MI An engineer told me if can't adjust just note as NCS

great video really helped me out wish i found you earlier

hes so good

Be awareed! Some numbers been changed..... I. E combination boiler reading

Marcin Masalski 👍

Hi, where can the bluelyzer be purchased from? the website has no shop or prices. It’s almost as though they don’t want to sell them. Keep up the good work.

10/9=1.11/10000 is it 0.00011 or 0.0011,anyway great video,best tutor

Amazing

Hey, thanks for good videos full of new knowledge, does this analyser show the results of CO or CO2 ‌‌on weight basis or molar basis?

Is there any point in the NOx reading when doing domestic flue gas analysis?

Great video. Can you do this test with the boiler casing off? I’ve seen comments saying it affects the test and causes oxygen to be taken from the room or is this nonsense? Maybe they mean with the combustion chamber open rather than the case or are all boilers different?

Jon-Paul Ward 👍

Great video. I've not yet to get any 02 Readings of less than 20.9 anywhere . However did you get 20.6 ? Thx

👍👍

Great video thanks 👍 I've recently got some new service / report pads one box asks for CO% would you get this on a flue sample test?

Flueless appliance - how do you find ratio?

Hello thanks for video I’m in weeks 3 gas training course and I’ll believe you are the number ☝️

Great lesson - only undermined by the incessant background music which is unnecessary and distracting

🙏👍

I prefer do flue integrity test before doing hi and low Combustion tests as the analyser has been freshly purged. Doing it the way in the video the analyser sensors are not clear from Combustion and more likely to miss any small co in the inlet flue.

Chris taylor

steve ward

Marcin Masalski

Sorry! Im working on these boilers on LPG Your probably using Natural Gas

Watched 🙂 Ben Hogan - Currently Training ... 4 Adverts 🤬

Tomkat👍🏻

Bhima Logan

👌🏽

Natnael