It's not a traditional semi-auto. It is a double reset system. It is completely different than a standard disconnector system.

I contacted tommy triggers about the problems people are having with safe, frt, frt. He is aware of the problem. He also said he added a longer disconnect to the future triggers. But did not acknowledge how he was going to fix the problem for the people who have the messed up parts.

What an amazing explanation of how these parts interact. I don’t own any of these products as I knew what was coming and a 400 dollar trigger was out of my budget, but this information is very cool. Cheers 🍻!

Thank goodness for you. I know a guy who knows a guy who has had a very similar problem that stumped him, which you just explained. I thank you very much!

OR you can flip the tommy trigger safety upside own, add a detent, mill a slot with dremel and you have a stealth selector. Remove left side lever and rotate, reinstall lever and you will have semi, frt and safe. Reverse process and you are back to compliant safe, semi, semi. OR you can use a standard safety by adding a detent between the two existing detents, mill a little material for clearance and then you will have a stealth safe, 45 degree frt, semi. End game is to appear compliant to observing eyes, make the detents shallow enough so that most people would not even notice the detent when rotating the safety.

YES, 3 POSITION M16 SAFETY WILL WORK. I know someone who did it. He used an FRT15 upgrade in a WOT and an M16 3 pos/auto safety. Said all he did was grind the center nub until it was half the thickness.

Killer vid!! Nicely done. 🇺🇲🇺🇲Happy 4th weekend🇺🇲🇺🇲

I'm slowly building an XM177 clone and this is the setup I want in there!

It does have a traditional, sear. It’s the disconnect that is different/missing.

I never had a chance to buy one :) please supreme court rule these are just normal drop. In triggers cuzz they are... Single pull single shot. Not a machine gun

Good information

This is exactly what I needed. My buddy put the tommy trigger and hammer in the frt and we couldn't get it to work on the 3rd selection, it was like another safety. He just needs a new safety he has some weird one with channel cut all around it from factory. I've never seen one like it but it's nkt the right one obviously. He needs the gunbroker safety

Anytime you're drilling on a round surface use a center punch and the drill bit won't walk off

I have a question, where did you learn how to do this yourself?

Question for ya, in position 3, it’s another safety. So I’m assuming the part that pushes the disconnect down is also pushing the trigger down. Thoughts ?

Out here doing God's work. I'm a po boy so having hard time even get enough for the trigger so hopefully soon I'll get a chance to do some milling (despite being broke I do have a mini mill that was gifted years ago ha, go figure)

I got a WOT and put the Tommy triggers FRT kit on it and it was the biggest headache to get working. It took a lot of filing to get work. I wouldn’t recommend using the WOT period. It is a knockoff of the FRT, but not a 100% knockoff. Only the hammers are the same.

So what’s the difference between the Tommy and GB one? Which one is better

I got my gb center piece but the selector lever hits the notch when going into 3rd position. If I tap the safety from the opposite side, the lever will clear the notch and go all the way into the 3rd position. Any idea how to fix this with having to keep tapping the safety?

Can you make a video on how a frt would work on a mpx and what modifications need to be done

I am solely interested in the mechanical function of how one would work in theory. But why would you suggest the powered by graves over the frt-15? You literally spent the lion share of the video explaining the frt-15, which is very impressive. It seems that the FRT-15 is the superior trigger for people who like to theoretically enhance operational abilities. If a person had a stock Bushmaster M4 patrolman’s rifle , what theoretical upgrades could be useful in an alternate universe?

The TT upgrade for Alamo comes with a spring (not the one already installed in the trigger). Where does that go?

So if i was looking for something close to an frt but for a 9mm ar pistol, what might you recommend? I see the echo 2 is compatible, but are there any that may take the cake?

Sorry for a stupid question, what levers are you using on the GB safety?

Amazing info. Is there a safety that works with the WOT?

Would a Full Auto 3-Position Selector Lever work?

will this concept be the same with an original alamo 15?and if so have you found these anywhere else?

What's the cheapest way to get 3 select for alamo?

Can you tell me what levers and screws you got for the GB safety?

Is the Alamo 15 a plug-n-play setup? Do I need a 3 position safety to retain safe, semi, frt? Or what if the lower already has cuts for a third mode or is that just cosmetic?

Hey man still waiting on my anti walk pins but is there any way you can show how to install the Tommy triggers Alamo upgrade kit on to an Alamo 15 trigger, I can’t find instructions anywhere and I’m still pretty new to the trigger mechanisms.

Can’t wait for the E3 to drop

Will the rare breed upgrade kit work in the WOT? tommy triggers said no but the factory components between both can be swapped around.

Will a m16 3 selector switch work? Arms unlimited has them for 25 bucks.

Will the tac con 3mr on Tommy triggers website work in the sig mcx/mpx with PMM FA upper parts?

can a 3 position safety act like a single

that group is awesome, search out mealteam 6 group as well

Have u tried the newest rare bread yet ? I’m sorry I got 10 minutes of knowledge on these trigger , do your opinion still stands on the Alamo is better than the other one?

So I have the Alamo and the TT upgrade kit and it will work just fine in safe and semi mode but in frt it will maybe fire 1-3 shots then light primer strike. I’ve tried different lowers, every buffer weight/springs etc. I will say that when the trigger is out and no selector is in I can drop the hammer without the roller needing to be pushed down. Any idea what it is?

With the new ruling does anyone have a reliable source to the Alamo15 being sold

I can't wait to get one

What is the make of the safety from gunbroker? ... there are many manufacturers of safeties.

Can you help me. I have the alamo 15 and tommy upgrade kit. I bought the saftey. The lower works and functions exactly how it's supposed to. When I put the upper on the lower, it shoots safe, frt, and frt. Please help

Is there a way to use a 3 position switch with WOT?

Will these safeties work w/ the Alamo as well or just the Rare Breed?

where can i find one that works with the selctor switch? The only one I can find is on gun broker, and it doesnt look the same

Sorry to bother you again but you have been helpful and I really appreciate your helpfulness but I don't know anyone to ask about this. I don't feel good about Gunbroker. They are making me send pictures of two ID's and a third picture of myself holding a picture ID so I can activate an account with them so I can buy something. My question is, does Gunbroker make everyone do this to activate an account? This seems very weird. Gunbroker looks like a Fed operation to ID people to me. Do you think Gunbroker can be trusted? They won't answer the phone and they are slow at responding to emails.

What brand of safety do I need to modify for the Alamo. I haven’t been able to find the propitiatory safety on gun broker for it. I was going to buy the trigger on the 15th but if there’s no safety what’s the point. Please help

Are the tommy kits ever going to be back in stock?

I’m sorry but how do I make my Alamo a 3 pos? I currently have it running with a geisselle safety.

What's the deal with Alamo triggers? They've been out of stock for months. I've been checking their website for some time now. Thanks

Is the selector still available? Searched it and could not locate it.

The ambi on gun broker is no longer available

Guess I’m too late to the party these aren’t available on GB anymore. And I can’t seem to find the group on FB

Would you provide a link to the Gunbroker website that shows what you have?

What's the name of the safety selector on gun broker?

Possible to have a more info of how much you removed or anything?

Can you contact me I need help with my rare breed Tommy trigger upgrade somethings wrong with it

I can't find that Facebook group, could you help

I can’t get my Alamo to fit into my lower. Any suggestions?

where do you get these?

i for one for my socom 458 frt 15 alamo 🍻

Are the Tommy kits still available for the Alamo 15?

Wot actually has a better design and the guy that makes it is from rare breed so it's kind of his design in the first place

Nice video. For a friend - Alamo with tommy upgrade and gunbroker safety. Safe Is safe, semi fires only one shot then it’s like it’s on safe again. If I move the selector to safe and back to semi, fires only one shot again. frt shoots frt fine. What is wrong with the semi position that I can only fire one shot. Please advise. Truly appreciate the info! Thanks!

Do they still sell the Alamo ?

What's the make/brand on the safety on gunbroker

This work with para 15 as well?

Is ENHANCED RESET TRIGGER any better ??

Any updates on lawsuit?

Rare breed doesn't look anything like that anymore...

Dude what's that fb group called?

Please link gunBroker safety

Will it work for 300blk?

Will this drop in a POF revolution

Are these still legal?

Your FRT is different than most. Possibly an older model? I’m not talking the casing. Most have a solid back fin and it is not separate like the one in ur video

great video but please stop calling the disconnector a "sear".

damn. nice machine guns.

Anyone messing with weights and springs is a fool... Get an adjustable gas block since thats what you need to adjust...

DO NOT SUPPORT these companies ...$350 for a trigger is insane.

It was the other way around. FRT was a rip off of an existing design. Lawrence is a snake.

Yeah but can't fucking get any of them !!!

good video. get a tripod please. I'm having trouble with which gunbroker listing it is. I cannot seem to find it. any help would be appreciated. you can also contact me at freedom firearms here on youtube. thanks man