Install and adjustment for the armamentusa.com A.L.B. Adjustable Locking Bar
Пікірлер: 48
@christineharris91832 жыл бұрын
We should all buy frt's to support rare breed
@wilhathaway19878 ай бұрын
You guys need to start making these again! The people desperately want them! PLEASE!!!
@TheyLive-20242 жыл бұрын
Balls of steel 👌 💪
@bap21392 жыл бұрын
How did you get that lock bar pin out so easily?
@CaptainNato2 жыл бұрын
Note to everyone installed with 2 washers trigger was hard to pull. Realized the locking bar was being pushed too far forward. Removed both washers and it works perfect. “PSA BCG”
@jorgealonso65 Жыл бұрын
Need some more
@j.angelis69342 жыл бұрын
Very cool stuff man, preciate your ingenuity. I've been holding off on the FRT(S) until I saw this and realize you solved many of the issues I was concerned about... so can I just send you a new one and have you do your magic? Or some other alternative? Anyway all good and thanks again
@barryarmsfflsot2 жыл бұрын
No need to send it to me anymore, these new parts are drop in.
@j.angelis69342 жыл бұрын
@@barryarmsfflsot would you mind if I had you do the work because I'd be more than happy to purchase and send you a new frt to customize... and pay you of course whatever you need
@rusdonmills55362 жыл бұрын
How can I purchase one of these? Have a FRT-15 gen 1 and need it. Thanks for any info you have.
@warymartinez68212 жыл бұрын
That’s what I’m asking! Idk why it gets quiet all the sudden lol
@Justin-oe9fs7 ай бұрын
Do you guys still make these?
@picklerick95782 жыл бұрын
How does this compare to the Alamo 15 Roller?
@barryarmsfflsot2 жыл бұрын
This is adjustable
@picklerick95782 жыл бұрын
@@barryarmsfflsot Well yes, but isn't the idea behind the roller that it is self adjusting? I'm not saying their product is better. I'm just curious how it compares. The reason why I'm asking is because I have, as of right now anyway, the quint essential FRT. I have a Tommy Triggers Ultimate Trigger Upgrade that has the spring loaded disconnector, their overstop screw modification, a JP Roller Trigger style modification, their selector switch, your positive reset bushing, and the Alamo 15 Roller. I wanted to know the advantages, because if that's the case thay it is better, then I'll get this and put it in my original Tommy Triggers housing.
@smokingcrab22902 жыл бұрын
@Pickle Rick, how did you come across an Alamo roller and a JP roller style mod?
@picklerick95782 жыл бұрын
@@smokingcrab2290 You know the right people
@barryarmsfflsot2 жыл бұрын
@@picklerick9578 the roller is NOT self adjusting. I’m fact, I’m working on different diameter rollers for this exact reason. There’s no way to change the tangent point in that roller unless you change its diameter/radius. My locking bar lets you adjust that contact point with a .105 range.
@joseph3952 жыл бұрын
Are these for the first generation frts or for all of them ?
@barryarmsfflsot2 жыл бұрын
All
@joseph3952 жыл бұрын
@@barryarmsfflsot ok thanks, what are all the upgraded parts that you recommended for the FRT fresh out the box?
@dangerousfreedom49652 жыл бұрын
Couldn’t slow the rate of fire on a 556 rifle?
@barryarmsfflsot2 жыл бұрын
Technically, it could.
@noelignacio71232 жыл бұрын
Is this the offset version?
@barryarmsfflsot2 жыл бұрын
Yes
@hightiersnobs2 жыл бұрын
Any thoughts on making bushings that will make the triggers fit 80% lowers?
@blueeyeddevil12 жыл бұрын
Why don't they fit 80 percents? Aren't the TCG dimensions the same for 80 percents as for any fully finished OEM lower?
@barryarmsfflsot2 жыл бұрын
Um, you’ll just have to make the lower right, to spec. The trigger will fit then…
@richardputko54102 жыл бұрын
how can i get 1
@barryarmsfflsot2 жыл бұрын
armamentusa.com
@shitpostcentral99202 жыл бұрын
Website says you're not making these parts anymore or selling them. Huge bummer.
@ercly93822 жыл бұрын
Yes. Wasted video post for most.
@rsebrin12 жыл бұрын
They aren't doing the trigger service where you send them in and they do the work. They only sell the parts for you to do it yourself.
@barryarmsfflsot2 жыл бұрын
That’s not what my website says at all, please read it again.
@barryarmsfflsot2 жыл бұрын
@@ercly9382 No, that’s not what my website says at all. These are shipping daily….
@barryarmsfflsot2 жыл бұрын
@@rsebrin1 Bingo! And WHEN stock is depleted on these parts, we won’t be making more. Until then, these are shipping. They WILL sell out soon…
@MeGaLilCe5ar8 ай бұрын
These are gone huh
@dustinmooring6982 жыл бұрын
Imagine having to buy something to make it comparable to the competition.
@barryarmsfflsot2 жыл бұрын
Like what competition? NO ONE makes and adjustable pet like this.
@dustinmooring6982 жыл бұрын
@@barryarmsfflsot the Powered By Graves doesn't need it boi
@rilianriggs46202 жыл бұрын
@@dustinmooring698 Tell us more about how many different lowers you've run a Graves in? Tell us how many lowers you've run a RB or WOT in? This guy is making parts to help an FRT run in a gun that probably has multiple out of spec parts.
@dustinmooring6982 жыл бұрын
@@rilianriggs4620 it's to replace the crappy rarebreed design that Mr. Graves sold to Wolf tactical.
@rilianriggs46202 жыл бұрын
@@dustinmooring698 You didn't understand a word I said, did you..I've got one that works great as is and so do many others.
@youtubeisinconsistent91692 жыл бұрын
Gone 👎
@barryarmsfflsot2 жыл бұрын
Yep. We sold ALL we had. We made it known from the start these would be a limited run and that they would sell fast.