How to Depressurize your Delonghi Dedica for free! EC685 EC785 EC885

Рет қаралды 166,503

Күн бұрын

The Delonghi Dedica EC685 comes with pressurized espresso filter baskets. In this video, I show how to despressurize them with a 1/8" drill bit, to allow a non-pressurized espresso extraction. This is a very easy mod to do, and can help to get a better extraction with minimal effort. Just be aware that once you depressurize, you will need to grind finer.
---------------------------------------Products used/recommended -----------------------------------------------------------
(these are affiliate links that help fund videos like this, at no extra cost to you)
►DeLonghi Dedica EC685:
🇺🇸 amzn.to/3p1t0tk
🇨🇦 amzn.to/3A1WygB
🇩🇪 amzn.to/3Ak7mFr
🇪🇺 geni.us/EC685 (EU/AU global link)
Impactful Accessories, starting with the most important:
► Double Basket by IMS (H26):
🇺🇸 amzn.to/3W6ihf2
🇩🇪 amzn.to/3H9lk1s
🇬🇧 amzn.to/3NmxVlS
🇨🇦 amzn.to/3H1MQyr
🇪🇺 geni.us/DeLonghi_IMS_Basket (EU/AU global link)
► Single Basket by Graef (only EU): geni.us/GraefSiebe
► Bottomless Portafilter, for diagnosing shots:
🇺🇸 amzn.to/3zA5k50 (alu) or 🇺🇸 amzn.to/3WoiHPu (wood)
🇩🇪 amzn.to/354PYZX
🇬🇧 amzn.to/3Voa6Mn
🇨🇦 amzn.to/3w18P1L
🇪🇺 geni.us/BottomlessPF (EU/AU global link)
► Calibrated Tamper, to compact coffee puck:
🇺🇸 amzn.to/3oLdsNd
🇩🇪 amzn.to/40TtgLp
🇬🇧 amzn.to/3VnZ0Hs
🇨🇦 amzn.to/3Hr30RB
🇪🇺 geni.us/51mmTamperCalibrated (EU/AU global link)
► Timed Espresso Scale, to measure shots:
🇺🇸 amzn.to/3M3jodT
🇩🇪 amzn.to/3p9YeBH
🇬🇧 amzn.to/42bYUFf
🇪🇺 geni.us/EspressoScale (CA/EU/AU global link)
Last but not least, a capable grinder is necessary. Here are some suggestions:
► Grinder Suggestions: kit.co/tomscoffeecorner/grind... (Amazon)
📖 Blog Article: tomscoffeecorner.com/delonghi...
🛠 All the Dedica Gear: kit.co/tomscoffeecorner/delon... (Amazon)
(*As an Amazon Associate I earn from qualifying purchases)
Join the coffee club! (subscribe): kzfaq.info...
AFFILIATE DISCLOSURE:
Some of the links used in the description will direct you to Amazon, as an Amazon Associate I earn from qualifying purchases at no additional cost to you.. Affiliate commissions help fund videos like this one.
#espressocrema #tomscoffeecorner #delonghidedica

Пікірлер: 184

@TomsCoffeeCorner 2 жыл бұрын

Hey guys, thanks for participating! Betül has been randomly selected as the giveaway winner! 🎉 Congrats to her, and thanks to all for participating! To everyone else: I can recommend these baskets, as worthy investments for your machine. They make the biggest difference in the espresso extraction. Generic Basket: geni.us/2CupBasket (Amazon link) Graef 2 Basket Set: geni.us/GraefSiebe (Amazon link) AFFILIATE DISCLOSURE: Some of the links used in the description will direct you to Amazon, as an Amazon Associate I earn from qualifying purchases at no additional cost to you.. Affiliate commissions help fund videos like this one.

@atm8600 2 жыл бұрын

I'm a big of fan of your videos, and have learnt alot of you 😍, You do it as a such easy way

@TomsCoffeeCorner 2 жыл бұрын

Thanks so much for your feedback, ATM. I do appreciate it!🙋‍♂️

@joseariasgarrido5601 9 ай бұрын

Muchas gracias. Con este video, me contestas a una pregunta que te había hecho en otro. Perfecto, probaré tu consejo.

@angkh1329 11 ай бұрын

If you don't have a drill bit to make a hole likes what Tom did professionally, you can also do that by hammering a nail through. But to make the job easier, a smaller diameter nail should be used first, then making the hole bigger by using a bigger diameter one. Placing the cup on a piece of wood with the bowl facing upwards, then hammer the nail down (This is to prevent the cup from being dented if bowl facing downwards) and any protruding burrs outside the bowl can be smoothed out easily by using a simple file or a dremel (if you have one).

@hiteshgurbani6570 2 жыл бұрын

This looks interesting. Thanks for sharing!

@rademenes80 2 жыл бұрын

I just bought the Delonghi Dedica. I ordered a distribution tool from Amazon and waiting for it to arrive. I would love the basket too. I'm in Cape Town, South Africa. love your videos! You're doing a great job!

@TomsCoffeeCorner 2 жыл бұрын

Hey Joanna, thanks for watching, and for your comment! I actually selected a winner a couple days ago. Shoot. You don't have Amazon down there, do you? What online retailer do you use? I could point you in the direction of a good basket.

@TomsCoffeeCorner 2 жыл бұрын

Btw, I think it's so cool, to reach someone in South Africa!

@rademenes80 2 жыл бұрын

@@TomsCoffeeCorner hi. I ordered from UK Amazon and my friend will fly here next month and deliver it to me. We normally use Takealot or Yuppiechef here as online stores. But they don't have those baskets

@TomsCoffeeCorner 2 жыл бұрын

@@rademenes80 Ah very nice. Thanks for sharing! I will have to check out those stores out of curiosity. Cheers!

@epmcgee Жыл бұрын

@@TomsCoffeeCorner multiple people.

@littlemisskate4254 11 ай бұрын

Thank you so much for this idea if it works so well.

@Pirelli. Жыл бұрын

I love these "tuning" videos. Thanks!

@TomsCoffeeCorner Жыл бұрын

Glad you like them, and thanks for watching!

@johnsnow2334 Жыл бұрын

I bought the delongi and i really like the coffee. I thought the coffee will be just okay, but its really good. Next thing is a bottomless Filter.

@manuelmelerovargas7232 2 жыл бұрын

Great video . Thank you 👍

@starrekip 4 ай бұрын

Great upgrade. Just tried it.

@user-md6dn9ni5o Ай бұрын

Dear Friend, I `m really appreciate for your advice otherwise I`ll bring this coffee machine to service and pay 20-50 pounds. Really the coffee was not pressurized and I clean these small holes and didn't make bigger the hole on the another sieve . Press start and the sound of preparing coffee was like in new machine. God Bless you, thank you so much !

@cirilothomasjrdonato3992 2 жыл бұрын

That is an awesome idea

@tysonjohn444 2 жыл бұрын

great videos bro! keep up the good work

@TomsCoffeeCorner 2 жыл бұрын

Appreciate it! Thanks for watching!

@ijontichy471 2 жыл бұрын

Thank You very much Tom! This tiny little hole, make espresso great!

@martinmacalintal4193 2 жыл бұрын

This is just cool, looking forward to some DiY. Thanks!

@TomsCoffeeCorner 2 жыл бұрын

Very nice, Martin! Have at it! 😉

@atlive1 Ай бұрын

thanks for sharing this nice explanation ...

@fernandocunha2139 2 ай бұрын

I will used the port filter thanks

@vivadecuervo 2 жыл бұрын

Nice tip...! Im in too!

@osoalvarenga9170 2 жыл бұрын

This is genius!!! Try it!!!!

@vercingetorix3.0 2 жыл бұрын

i cant resist a good coffee giveaway. im in

@dakalla Жыл бұрын

0:24 you can also just drill the first type of basket, just dont go too deep so you dont damage the inside filter holes. and btw. its nice that you notice to use personal protection equipment, but when drilling, never ever use gloves, as they might get stuck in the drill!

@svenabend360 2 жыл бұрын

Looks like there is pressure being built up in the dual wall again. You can tell since the flow diverts to the sides rather than straight downwards like at the start. So I think a larger hole is better. Gonna try this! Thanks

@red1004 18 күн бұрын

Is a larger hole better? Did you try it. Please let me know

@sebastianwette11 2 жыл бұрын

Would be a great motivation to buy that new grinder xD

@maddalenavertolone4881 5 ай бұрын

thanks my friend

@Am-qv2oe 2 жыл бұрын

not too bad bro..can try it

@thorstensund6649 Жыл бұрын

Thanks

@ajmckay2 2 жыл бұрын

Awesome idea! I think it's important to point out that once you do this you must grind fine and you cannot use pre ground coffee anymore. For this reason I opted to purchase a non pressurized basket (and a good grinder) like the one you showed. That way if I need to use a coarser grind sometime I'm able to.

@TomsCoffeeCorner 2 жыл бұрын

Hello AJ, you are definitely right! If you depressurize the filter, then you have to grind finer. I’d mainly recommend doing this, if you have extra baskets to experiment with, or don’t want to wait for a new non-pressurized one to arrive. Cheers, ☕️ Tom

@SH1FTER 10 ай бұрын

So this will allow to dial in finer grinds?

@angelrodriguezdiaz9156 4 ай бұрын

Thanks for sharing, and what about the temperature?

@tonystark-yb7l 4 ай бұрын

Tnx for this it happened to me no water coming out to this baskets

@postoffice233 5 ай бұрын

Dear Tom, can I use new hand-made non-pressurised basket with original Dedica portafilter or I have to cut the bottom or remove black plastic, etc? Thank you

@wbwright79 2 жыл бұрын

the pressurized basket can often deliver more crema. for my dual-wall basket, i ended up grabbing an acetylene torch and burning the stuck grounds out. it mostly melte out the mess, and you can hear it and see it coming out from the openings. rinse and repeat about 3-4 times until you no longer hear the old grounds melting any longer. bye the way, if you don't clean out the junk then you will eventually destroy the pump.

@TomsCoffeeCorner 2 жыл бұрын

Thanks for your feedback and tips! Everyone's taste is different, so if you prefer the pressurized baskets for your coffee, then that's good too! Thanks for your great video on changing the pump on the Dedica by the way. It took the uneasiness away for me to open up my machine. 👍

@wbwright79 2 жыл бұрын

@@TomsCoffeeCorner yeah, i probably sound a bit negative. everyone does have different taste for sure. this video and others will help people out. it will also prevent premature pump failure (among other things) for sure too.

@lucasvialle6836 2 жыл бұрын

I’m in for the giveaway ! Thanks for your videos

@TheJamesMReid 2 жыл бұрын

Nice! Thanks for the giveaway!

@TomsCoffeeCorner 2 жыл бұрын

Noted!

@chekauk7596 2 жыл бұрын

Hey! That’s a nice idea. Especially now, when I finally bought eureka mignon specialita. (Mostly because of you using it, heh). Now it would be great to have a depressurised basket because the grinder is capable for it. Nice vid! Thanks!

@TomsCoffeeCorner 2 жыл бұрын

Yes, actually I got the idea from a commenter on a forum I believe. Cool experiment, I agree! Should I jot you down for the giveaway?

@chekauk7596 2 жыл бұрын

@@TomsCoffeeCorner I am thinking of buying a depressurized basket right now, but I don’t have any ideas… I doubt whether there are good portafters on aliexpress, so I would really love you to write me down)

@TomsCoffeeCorner 2 жыл бұрын

@@chekauk7596 Sure, you are noted. But, I would suggest to everyone to just go with Amazon, not Aliexpress. I have included Amazon links in the description box. With Amazon, you get quicker delivery, a rated product, and you can return it if it doesn't fit. Cheers!

@chekauk7596 2 жыл бұрын

@@TomsCoffeeCorner oh, ok. I’ll watch through those links you attached! Thanks!

@AkramSays Ай бұрын

i bought an open portafilter, but doesn't get any cream, what I'm I doing wrong?

@nazlimammadli3777 10 күн бұрын

Hi I get new one. I’m interested in orginal tiny basket will destroy my coffee machine?

@hhhhhhnnnnnnnnnnnnnn Жыл бұрын

awesome idea! please do a tasting competition between a purchased basket and the drilled one. Also how many millimeters is the drill? what would happen if you make the hole bigger?

@TomsCoffeeCorner Жыл бұрын

Some people drill the hole larger...it is your choice. Cheers!

@manuel-uq5mt Жыл бұрын

Hi Tom. Your videos are always excellent. Not only your mastery in coffee but the way you explain things make them very special. I enjoy them very much. Thank you. One question about this one. What was your reasoning to choose a 3mm drill instead of a bigger one (5, 10, 15mm) and get closer to the no bottom filter case?

@TomsCoffeeCorner Жыл бұрын

Well, the larger the bit, the more the tip is tapered, and then you'd run into the inner basket part with the drill bit tip, before piercing the basket with the outer radius of the drill bit.

@manuel-uq5mt Жыл бұрын

@@TomsCoffeeCorner If I understand correctly that should not be a problem in my case because the inner part is renovable (I have a Dedica Arte).

@manuel-uq5mt Жыл бұрын

@@TomsCoffeeCorner My question was more .... Would a 10mm or 15mm hole be better than a 3mm one to be closer to the bottom less filter support case?

@frantic9332 8 күн бұрын

Hi Tom! I follow your channel from southern Italy, and I love your videos. A question: according to you why is so important to make basket unpressurized? (Or using not prezzurized basket) Because i use both of two, but sometimes seems not to be differences. Sorry for my english, and thank you so much

@patrickbennett439 Жыл бұрын

😆😆The hacks never stop.

@686alb Жыл бұрын

I did this, but with a ⅛ drill bit. Now my dedica will pre soak but only pull a shot for 3 seconds. I tried reseting my settings, that didn't fix it. What is interesting is without the depressurized portafilter on it will push water out no problem, it's only when I but the basket on.🤔 I'm wondering if I need to drill my hole bigger? Any thoughts? Thanks!

@TomsCoffeeCorner Жыл бұрын

That sounds counterintuitive to me. The larger the hole that you drill, the more relief there should be for the pressure. Maybe try a larger hole?

@powers14sj90 2 жыл бұрын

With the delongi baskets the tiny holes aren’t always all drilled out properly, any tips to fix this or should I just buy a new-higher quality basket

@TomsCoffeeCorner 2 жыл бұрын

Howdy! The baskets are pretty affordable, and allow larger doses, so I would recommend picking up an aftermarket, non-pressurized one. Cheers!

@emiloles9873 Жыл бұрын

Hi Tom I’ve just purchased a Dedicated Arte could you please recommend a bottomless portafilter also a Electric grinder for mainly espresso. Thanks Emil

@TomsCoffeeCorner Жыл бұрын

Sure, here are two options: geni.us/Normcore51mmBottomless or geni.us/BottomlessPF

@ODINCODES Жыл бұрын

Hello Tom, Thank you for your great videos! I wonder if we can hack ese basket instead, is there any way to depressurized that basket since i dont use pods?

@TomsCoffeeCorner Жыл бұрын

Sure, that should work too, I would think.

@ODINCODES Жыл бұрын

@@TomsCoffeeCorner the only thing to concern is that I can't just push drill in to the hole. becuase I may end up making a hole into the entire basket...

@LUKEFIGAMING 2 жыл бұрын

hello, I need your Support, I have the dedica 785, and I have trouble getting the coffee out with the double basket,, I grind the coffee with the grinder kg 79 modified. so I grind it as fine as possible, but the coffee does not come out,how many grams of coffe use from one cup, and that from two? Thanks

@TomsCoffeeCorner 2 жыл бұрын

Hey Luke, are you using the pressurized baskets? If so, you cannot grind too fine for those. They will get jammed quickly. I would really recommend one of the non-pressurized baskets that I have listed in the description.

@Davide-zb9ji 2 жыл бұрын

One question, I bought a non pressurised filter but no matter how fine coffee is, extraction time is always the same and always too fast. How can I change that?

@TomsCoffeeCorner 2 жыл бұрын

Hey David, check out this video for extraction tips. If it is still too fast, normally it has to do with beans that have not been freshly roasted. What kind of beans do you use? You'd be surprised just how much difference freshly roasted beans make, if you haven't tried them yet. kzfaq.info/get/bejne/ZpZ-hqpqmZudkWw.html

@maringcoffee Жыл бұрын

Hi Tom, is it safe to consume after drilling? I'm afraid that some pieces will fly inside and get stuck. But I didn't open the all the way because of the sediment, but just enough so that there is no pressure and it works great, I just don't drink yet until I'm sure there are no pieces

@TomsCoffeeCorner Жыл бұрын

Hi there! Well on my basket, I could remove the insert, and clean everything thoroughly with water, and made sure it was totally clean before using. Cheers! Tom

@maringcoffee Жыл бұрын

@@TomsCoffeeCorner Hi, yes I know, but I did it on the cialde basket so that I can knock my coffee out, because I don't wash that filter every time :) cheers

@toddt0606 5 ай бұрын

Great video series, love the porn music overlay (haha), just got a new Dedica and it's already struggling to produce expresso, had to run it like 8 times to get enough to call it a double so obviously there is an issue with the filter, will try some of your troubleshooting ideas, thanks !

@yiannisanton21 2 жыл бұрын

Gheers from GRECCE !!!

@TomsCoffeeCorner 2 жыл бұрын

Awesome, thanks Yiannis! Hey we have a basketball player on the Milwaukee Bucks from Greece, with the name Giannis Antetokumpo. Do you know him?

@yiannisanton21 2 жыл бұрын

@@TomsCoffeeCorner YIANNIS IS THE BEST PLAYER IN THE WORLD!!

@TomsCoffeeCorner 2 жыл бұрын

@@yiannisanton21 👍🦌😉

@alexzay9637 8 ай бұрын

Tom is a great idea 😄 Ребята, просверлили, результаты есть?

@francorossi7695 Жыл бұрын

grazie molto utile

@nidarahman2305 Жыл бұрын

can we not make the hole bigger, like thrice or four times bigger

@TomsCoffeeCorner Жыл бұрын

Hmm, yes I don't see why not. It will just be a little harder to drill through the metal, but should be doable.

@GodGotHigh 6 ай бұрын

Can you use a standard filter with the portafilter the machine comes with? (EC885) or do you need a bottomless portafilter too?

@TomsCoffeeCorner 6 ай бұрын

You can, but then you have to remove the plastic insert in the OEM portafilter.

@marcellomassimiani8933 Күн бұрын

Ciao Tom, sempre belli i tuoi video. Vorrei proporti una cosa da frae se vuoi.Vorrei depressurizzare il cestello de longhi 685 per le cialde ese, pensi sia possibile?Potresti fare un video a riguardo?grazie

@harchihiarchi 2 жыл бұрын

Hi Tom. I have a separate question that i was hoping you may be able to help us with. We have an older EC680 that, without any modifications, we were so happy with that we bought a second..., as a kitchen colour change...; the problem we have is that with identical grinds on fresh roasted beans, the newer EC685 is very poor by comparison. We are using identical medium heat, and same water hardness, and same water volume, as we set from straight water flow.., and the newer 685 is never as good, and has never been as good. Any thoughts ? Rgds, Mark

@TomsCoffeeCorner 2 жыл бұрын

Hey Mark, well that's a tough one. I have a 5 year old EC680, and a newer EC685. I measured their compressions. The newer machine had a max of 11 bars, and the old one maxed out at 7 bar. Perhaps you got used to extractions at a lower pressure? Otherwise, maybe the new machine is defective?

@harchihiarchi 2 жыл бұрын

@@TomsCoffeeCorner - Thanks Tom. Maybe you are correct on both points.., however Delonghi have offer to have it brought in... I will let you know the outcome. Ta

@TomsCoffeeCorner 2 жыл бұрын

@@harchihiarchi Ok, well I am curious how it works for you. Keep us posted. Cheers!

@Stardustparadise418 2 жыл бұрын

@@harchihiarchi how did it go? :)

@harchihiarchi 2 жыл бұрын

@@Stardustparadise418 Thanks so much for following up. Delonghi replaced the machine with new, however was identical in performance to the one I was complaint about..., so we bought another product. We still have the other older ec680 ( I think that's the model ), which continues to be great. Maybe they changed the pump or tubing / water flow in the ec685..., but I really don't know.

@marincatalin309 Жыл бұрын

Hello Tom. I recently bought an ec685. I use the standard pressurized filter. I haven't bought a grinder yet, so I use pre-ground coffee. The problem is that whatever settings I tried, the coffee always comes out very bitter. What can be the problem? Maybe pre-ground coffee can be too finely ground, the type of coffee, the settings of the machine? Do you recommend the depressurized filter for pre-ground coffee? What type of grinder do you recommend? Thank you.

@TomsCoffeeCorner Жыл бұрын

Hello there! Yes, your beans are probably too old - or in other words roasted too long ago. These videos may help: How to extract the perfect espresso: kzfaq.info/get/bejne/ps9_acZnnpuzoGw.html How to Get Crema: kzfaq.info/get/bejne/ZpZ-hqpqmZudkWw.html Why Supermarket Coffee Beans are RUINING your Espresso! kzfaq.info/get/bejne/a6iXgK6i2p7Ken0.html

@moskitoh2651 7 ай бұрын

Is the extraction time linger than 30s, than you need to reduce it. As you can not grind coarser, try less coffee and less water.

@JuanManuel-kj9fu Жыл бұрын

is it possible for you to cut the bottom of the basket ? i'm thinking of drilling the tiny hole, but i think i will get better result, cutting the hole bottom.. my pressurized basket has a metal screen, not like yours its rubber...

@TomsCoffeeCorner Жыл бұрын

Yes you can cut the bottom off, but it's not easy to do. Good luck! It might be better just to buy a new basket: amzn.to/426MajF

@JuanManuel-kj9fu 11 ай бұрын

@@TomsCoffeeCorner its for an oster 6601

@rovshanakhundov6143 4 ай бұрын

I did it , now no problems with clogged hole

@neildavison8065 2 жыл бұрын

Does de-pressurizing the basket actually make much difference I'm relatively new to all this.

@TomsCoffeeCorner 2 жыл бұрын

Well, it allows you to grind finer, so that you can achieve a better extraction.

@neildavison8065 2 жыл бұрын

@@TomsCoffeeCorner thank you for your reply I think this maybe something I'll have to look into, I have already followed you video on upgrading the steam wand and that has been successful.

@TomsCoffeeCorner 2 жыл бұрын

@@neildavison8065 Oh, that's very cool! 😉 Good luck with the mod!

@edwinbaaij7772 2 ай бұрын

Hi Tom, What is the taste difference when using a depressurized filter?

@TomsCoffeeCorner 2 ай бұрын

You can grind finer, and get a traditional extraction, where the crema is caused by the bean, and not the turbulence created via pressurized basket.

@sanchezgedgare 7 ай бұрын

Can you use depresurized filter in the original two hole portafilter?

@TomsCoffeeCorner 7 ай бұрын

Yes, but you'll have to likely remove the plastic insert.

@DocHoliday596 Жыл бұрын

Hello Tom. My double basket seems to not fit very tightly. It sometimes stays into the machine when I unscrew the portafilter, and when I'm trying to clean it by giving it a slight hit it falls off. Is this is a deal breaker? Should I sent the machine back? It's a hassle. Do you think If I just buy another basket or portafilter it would be better?

@TomsCoffeeCorner Жыл бұрын

Have you tried a non pressurized basket, like this one? amzn.to/3JBHEC1 I have never had an issue with these sweet IMS baskets.

@DocHoliday596 Жыл бұрын

@@TomsCoffeeCorner thank you Tom I will try it. Do you have any portafilter recommendations too, in case that's not the issue? If that doesn't do it either I guess I'm gonna have to look into the gasket?

@TomsCoffeeCorner Жыл бұрын

@@DocHoliday596 Hey there, I have some listed in the video description. Cheers and good luck!

@DocHoliday596 Жыл бұрын

@@TomsCoffeeCorner thanks a lot!

@katemajore5602 7 ай бұрын

Hello! Helpful video! Related to the coffee machine EC685, the machine is newly bought yet for single shot and double shot, it barely produces any coffee and stops after 3-5 sec max. Is it due to grind size or is there something wrong with the filter?

@TomsCoffeeCorner 7 ай бұрын

Try grinding coarser, especially if you're using the included presurized filter baskets. Cheers!

@josiahberry6531 2 жыл бұрын

Would this be compatible with the portafilter provided by Delonghi?

@TomsCoffeeCorner 2 жыл бұрын

You betcha!

@josiahberry6531 2 жыл бұрын

@@TomsCoffeeCorner Nice! I've been looking for a solution that didn't involve buying an entire new portafilter.

@zack20012 3 ай бұрын

Hi I tried to do it the coffee comes out like the moka do I need to grind finer?

@TomsCoffeeCorner 3 ай бұрын

Yes, and make sure to use fresh beans.

@JuanManuel-kj9fu 11 ай бұрын

hace you tried to make the hole 2 o 3 cm wider ?

@TomsCoffeeCorner 11 ай бұрын

Nope, I don't have an ideal drill bit for that.

@rovshanakhundov6143 4 ай бұрын

More safe way to do the hole a bit bigger is to use dentist drill bits

@fabioferreiradasilva6088 4 ай бұрын

Tom, have you seen the version of Dedica called EC680R?

@TomsCoffeeCorner 4 ай бұрын

Yes, it's the red EC680. Cheers!

@betulluk 2 жыл бұрын

I have just bought Delonghi Dedica EC685 and now I am very wondering how those basket affect the taste of coffee👀

@TomsCoffeeCorner 2 жыл бұрын

Hello Betuel, thanks for watching! Should I enter you in the giveaway?

@betulluk 2 жыл бұрын

@@TomsCoffeeCorner Oh! Yes please. thank you☺️

@TomsCoffeeCorner 2 жыл бұрын

@@betulluk Ok, I used a random number generator, and Betül Türkmenoğlu is the winner! Congrats to Betül, and thanks to everyone for participating! Betül: contact me at tomscoffeecorner@gmail.com for further details regarding shipment.

@betulluk 2 жыл бұрын

@@TomsCoffeeCorner What good news!🤩

@eliekazzi190 2 жыл бұрын

I would love to have them pls

@TomsCoffeeCorner 2 жыл бұрын

Oh I’m sorry Elie, but the winner has already been drawn. Thank you for watching! 😉

@l4zyturtle479 Жыл бұрын

Couldnt you just cut off the second wall with the hole in it? As to make it an actual bottomless basket?

@TomsCoffeeCorner Жыл бұрын

It's not really easy to do. I have done it with a Dremel, but it was a pain in the butt.

@l4zyturtle479 Жыл бұрын

@@TomsCoffeeCorner wow, thanks for the quick reply! Does it work properly tho? I will do it then but didnt know if the little screen would leak on the sides or something.

@l4zyturtle479 Жыл бұрын

@@TomsCoffeeCorner Does it work properly? Does the little rubber seal properly seat?

@wazzup105 9 ай бұрын

Interesting... Does that work also on a ECP 3420?

@TomsCoffeeCorner 9 ай бұрын

Sure. It should work to depressurize any baskets like this.

@deyoviC 2 жыл бұрын

Will creating a lot of smaller holes improve the extraction?

@TomsCoffeeCorner 2 жыл бұрын

Boy I don't know...but you'd have to deburr a lot more holes. I think one is enough to just depressurize it.

@deyoviC 2 жыл бұрын

@@TomsCoffeeCorner Thanks for the reply. I will try with one for now. Have a nice day. :)

@deyoviC 2 жыл бұрын

@@TomsCoffeeCorner I tried and the coffee now comes with a very bright shallow crema on top. Tastes better than stock, very smooth. I think the crema texture is what needs tweaking now. I use Lavazza Rossa, temperature on High, water hardness Medium with the stock handle, except the black plastic from the inside (nipples) are removed. Any recommendations to get a better, thicker crema? I buy coffee from my local coffee shop, the owner grinds it freshly so what should I ask for next time? Thanks and have a good day!

@TomsCoffeeCorner 2 жыл бұрын

@@deyoviC Well, the next step would be to get your own grinder so that you can grind on demand. Timing is paramount, since grounds lose their freshness quickly. Your local roaster will provide much better crema than Lavazza, since it is the CO2 escaping, which is creating the crema. On old supermarket beans, the CO2 has already escaped.

@deyoviC 2 жыл бұрын

@@TomsCoffeeCorner I am looking for some grinding machine sales and will purchase one in foreseeable future. I will try with fresh coffee tomorrow and if there is a difference then I know it's the grind. Thanks a lot for your reply.

@jackmesiha960 8 ай бұрын

I think if I made a bigger circle than that, it would be better? what do you think؟

@TomsCoffeeCorner 8 ай бұрын

Sure, it could work as well.

@jackmesiha960 8 ай бұрын

@@TomsCoffeeCorner thx alot

@gizmo1252000 Жыл бұрын

i tried this method and managed to cut both my arms off and both my legs ,i also breathed in metal shaving ,and had to have my lung removed . not only that .one of the metal shaving got into my eye and snap ,had to have to eye removed . stay safe everyone .im using mind control to write this comment . 😂🤣😅

@user-Zi9 3 ай бұрын

@@kg-Whatthehelliseventhatесли он тебя не послушался в тот день, то со дня на день у него может родиться ребёнок.

@eduardscooper4719 Жыл бұрын

My question is: Why do manufactures made pressurized baskets in first place?

@xTaCTiger Жыл бұрын

ita for corser coffee like store bought pre ground coffee

@TomsCoffeeCorner Жыл бұрын

I think because a lot of people use preground Lavazza coffee...

@eduardscooper4719 Жыл бұрын

@@TomsCoffeeCorner Thanks !

@WillNewcomb Жыл бұрын

I tried depressurise the basket on my Delinghi ECO310 and it definitely made the coffee taste worse!!!

@TomsCoffeeCorner Жыл бұрын

Well, beware that if you depressurize your basket, that you have to grind finer.

@EwCoins 2 жыл бұрын

Me me me!!!

@albagerfpv5883 Жыл бұрын

should have watched this earlier..... 🥳

@SheikhAlladeen Жыл бұрын

🌋🌋🌋🌋🌋

@TomsCoffeeCorner Жыл бұрын

What do volcanoes mean? Is that good?

@Bl4CKDevil5 2 ай бұрын

But why?

@freedomforbrave6527 Жыл бұрын

I did same and it ruined my coffee, I just discovered that I must grind fine, I am sad

@TomsCoffeeCorner Жыл бұрын

Do you have a grinder yourself? If not, the Kingrinder K4 is the best for the price.

@andresmiami031681 2 жыл бұрын

I did it and now not crema in my espresso be careful if you don't know what you doing

@TomsCoffeeCorner 2 жыл бұрын

Well now you need to grind finer, and use fresher beans. Cheers!

@CaptainRamius 2 ай бұрын

Soooo the obvious....WHY ?would you depressurize

@calleblomquist 6 ай бұрын

That's nonsense, a sieve costs 8 euros.

@ostinpawers9442 Жыл бұрын

Я думал только русские дырки сверлить умеют и главное могут додуматься до этого))) А он же ещё и дно рожка похоже сам отпилил)))

@alexzay9637 8 ай бұрын

Том, красавчик👍, он сказал, что прочитал об этом на форуме. Может и без узких не обошлось😂 Пс, просверлили, результат есть?

@netfixconjunta 24 күн бұрын

these is a disastre is better buy a new canaste

@hawksights 3 ай бұрын

A mask for drilling a small hole into a sheet metal? Sorry, glasses ok. Can make sense, gloves not so much. You don't wear gloves when handling power tools. But a dust protection mask? Really not nessecary. Even for the deburring afterwards this is overkill. You also have to consider that protection also disturbs and can interfere with your vision thus an accident is more likely to happen especially if the person is unskilled