HOW TO INSTALL a Rancilio Steam Wand: Delonghi ECP 3420, ECP 3630, ECP 3120, Stilosa

Рет қаралды 45,873

Күн бұрын

In this video, I show you how to put a Rancilio Steam wand on the ECP Series of Delonghi home espresso machines. This will give your machine a nice steam wand to practice your latte art with. Product links are below.
This shall work for the ECP line, including: ECP 3120, ECP 3420, ECP 3630, ECP 35.31, ECP 33.21. Should also work for the Stilosa, since they're about the same machine.
How to Steam with Rancilio: • HOW TO STEAM MILK on t...
-- Products used/recommended in this video --
(these are affiliate links that help fund videos like this, at no extra cost to you)
► Rancilio Steam Wand:
🇺🇸 amzn.to/3a1Zakk
🇩🇪 amzn.to/3bG0Bpd
🇬🇧 amzn.to/3ywMEmj
🇨🇦 amzn.to/3yqFmj1
🇫🇷 amzn.to/3bG0NEX
🌎 geni.us/RancilioSteamWand
► Delonghi Kit: kit.co/tomscoffeecorner/delon...
► Grinder Kit: kit.co/tomscoffeecorner/grind...
► Casio 2100 Watch: amzn.to/3LE4s5M
► Tool Kit: kit.co/tomscoffeecorner/essen...
Join Patreon for early access and behind the scenes: / tomscoffeecorner
Machine source: received for free on the used market
Start time: Tuesday, 25 April 2023 (CEST), 6 a.m.
Chapters:
0:00 Intro
0:24 Disclaimer
0:46 Removing Facia
1:41 Removing Top Panel
2:23 Removing Boiler & old Steam Wand
4:22 Preparing new Rancilio Wand
7:15 Mocking up the Rancilio Wand
8:39 Getting the Hose over the hump!
8:55 Mistake! Ripped the hose
9:32 Getting the hose clamp back on
10:35 Installing the Prepared Rancilio Steam Wand
12:14 Leak Test
13:30 Tools Required
14:30 Steaming Demo
----------------------------
*DISCLOSURE: The above Kit.co and Amazon links lead to Amazon, and since I am an affiliate, help fund videos like this one, at no extra cost to you.
#TomsCoffeeCorner #Espresso #HomeBarista

Пікірлер: 222

@TomsCoffeeCorner Жыл бұрын

I suggest watching this, maybe twice, and reading through the comments before doing this mod yourselves. Thanks for watching, comments welcome! How to Steam with Rancilio: kzfaq.infoyAcH61XJHxA -- Products used/recommended in this video -- (these are affiliate links that help fund videos like this, at no extra cost to you) ► Rancilio Steam Wand: 🇺🇸 amzn.to/3a1Zakk 🇩🇪 amzn.to/3bG0Bpd 🇬🇧 amzn.to/3ywMEmj 🇨🇦 amzn.to/3yqFmj1 🇫🇷 amzn.to/3bG0NEX 🌎 geni.us/RancilioSteamWand ► Grinder Kit: kit.co/tomscoffeecorner/grinder-suggestions ► Camera Kit: kit.co/tomscoffeecorner/studio-gear ► Tool Kit: kit.co/tomscoffeecorner/essential-tools Join Patreon for early access and behind the scenes: www.patreon.com/tomscoffeecorner Chapters: 0:00 Intro 0:24 Disclaimer 0:46 Removing Facia 1:41 Removing Top Panel 2:23 Removing Boiler & old Steam Wand 4:22 Preparing new Rancilio Wand 7:15 Mocking up the Rancilio Wand 8:39 Getting the Hose over the hump! 8:55 Mistake! Ripped the hose 9:32 Getting the hose clamp back on 10:35 Installing the Prepared Rancilio Steam Wand 12:14 Leak Test 13:30 Tools Required 14:30 Steaming Demo ---------------------------- *DISCLOSURE: The above Kit.co and Amazon links lead to Amazon, and since I am an affiliate, help fund videos like this one, at no extra cost to you. #TomsCoffeeCorner #Espresso #HomeBarista

@MrsJC-iv1pw 5 ай бұрын

Hi Tom, can you please post a direct link here for the exact wand we need to purchase? I’m clicking on the link you provided & it just opens an Amazon page with many to choose from….’Old wand”, “V1/V2 wand”, etc.

@jsolomo5 6 ай бұрын

So I'm currently adding this. TO ANYONE WHO IS DOING THIS, USE BOILING WATER TO HEAT UP THE PLASTIC NUT! It literally took me 20 seconds to get this nut around the two bends. Thanks Tom, for showing us the way!

@TomsCoffeeCorner 6 ай бұрын

Thanks for that awesome tip!

@graysonkoehler9377 5 ай бұрын

Saved me 30 minutes this Friday🎉

@cassyaguilar3969 3 ай бұрын

How long did you leave it in the boiling water!

@michaelcampos7273 3 ай бұрын

@@cassyaguilar3969haha just came here to check on this as well

@ilhanates Жыл бұрын

I love how you showed the failed attempts and things that you experienced to be wrong (like using the needle tip pliers and not being able to put it back on, or that the wand got scratched using the wrench), absolutely amazing video!

@TomsCoffeeCorner Жыл бұрын

Thanks! I hope you guys can learn through my mistakes. Cheers!

@ManGuideVlog 11 ай бұрын

My machine is leaking and these are the best instructions for taking an ECP apart. You rock Tom.

@MaXim4mSpeed Жыл бұрын

To get the little bugger easier over the bend, put it on hot water for a few minutes. Little olive oil on the wand, twist over the bend and it goes on very easy.

@TomsCoffeeCorner Жыл бұрын

Thanks for that tip!

@jonathanmsmith Жыл бұрын

Thanks for showing the full process here and including the parts where things go poorly and frustration ensues. Too many how-to vids skip those bits, and to me, they make the final reassembly that much more satisfying. Plus it’s helpful to know which shortcuts do and don’t work. Looking forward to sweating and swearing through this upgrade myself!

@KooglaGK Жыл бұрын

Thank you Tom for providing us with the best guide on upgrading the ECP 3420/3630/3120.

@spartan9212 Жыл бұрын

My steam wand has arrived and the operation will begin. I purchase this machine and started my coffee adventure thanks to your channel because you made it fun. 👍🏼

@DenizDivine 6 ай бұрын

...was the operation a success? 😊

@pabloramirez8900 Жыл бұрын

Thanks so much for the video. I made it on my Delonghi 33.21, it took me more than an hour of suffering. A real pain but totally worth it!

@billtanthowijauhari2692 11 ай бұрын

I watch your reference about delonghi since before I bought one. your video is so rich of insight and also this one. But after watching full video and see the hard things that need to do, and thinking that I really lame at that point, so I better buy a new one. Thank's tom

@stevenmiranda073 Жыл бұрын

I did it! Works great! Seems to have fixed my steaming issue as well :)

@jeet-Seattle Жыл бұрын

Oh that's how it looks like inside,very nice video Tom thanks😊😊😊

@TreyJustice Жыл бұрын

Thank you for this. I just got the wand and will try today. I am trying to get the most of my little ecp3420 before I upgrade haha

@Denis_Kondratenko 6 ай бұрын

Great job! Thank you for sharing your knowledge.

@haytahurtatv8392 9 ай бұрын

This is awesome! Im excited to do this! Thank you for the video !

@ao6679 7 ай бұрын

You just convinced me to get teh ECP3420, not only because it brews coffe and steams milk pretty hot but is upgradablle on top of that. I know they are 120 on amazon right now but I will shoot for $50 used one. Grazie mille!

@ElvisCheung-xl5qg Жыл бұрын

When I was modding mine I used a hair dryer to heat up the plastic bit when I am pushing it in, it turns out to be way easier, just a gentle push and its in.

@TomsCoffeeCorner Жыл бұрын

Thanks for that tip!

@colinrandall8896 11 ай бұрын

3:22 "Did you put your name in the goblet of fire?", Dumbledore asked calmly. I found a used one of these machines and I will definitely be coming back to this video when I get it. Thanks!

@Johan_jm Жыл бұрын

Good looking shot!!!!!!!

@BigBenAdv Жыл бұрын

I did the same mod for my 685 back before I gave it away - getting the plastic ball 'nut' across the bend is insanely difficult just using your hands alone. What I highly suggest to make it easier is to oil the wand at the bend, and use pliers on the plastic ball to twist it whilst pushing/ pulling it across the bend. If you're concerned with scratching the ball 'nut', don't worry, it doesn't affect the performance if you do (I scratched mine up but it didn't matter). However, if you really want to avoid scratching it, just put a few layers of masking tape or painters tape onto the pliers jaws and use it that way.

@titeo281 2 ай бұрын

Thank you Tom for the Video, I just upgraded mine 10 minutes ago & it took me about 5 minutes to get the white plastic nut out. It’s a lot easier to soak the white nut in boiling water for 5-10 minutes and rub oil on the wand. The whole process took me about 30-45 minutes.

@TomsCoffeeCorner 2 ай бұрын

Thanks for posting your experience! Have fun :-)

@e12voltsdac 10 ай бұрын

Thank you for this amazing video Tom! It was helpful to watch through before performing the wand replacement. As other have mentioned, my ECP3420 (US model, bought in 2015) had metal crimps holding the hose between the wand and the boiler. I was able to carefully disassemble the crimp by prying the metal parts. I re-used the existing crimps by bending the metal to expand them with needle nose pliers and then re-crimping with large flush cutters. Others may want to look at small screw-on type hose clamps or buying a single ear metal crimp kit. The size is 9.5mm diameter for both clamps. One tip for getting the plastic ball onto the new wand is to lightly heat the plastic using hot air or stovetop. This made it much easier to twist and slide the ball past the curves of the new wand. Overall it's working great now and I have LOTS of steam with the new wand. Can't wait to start practicing my milk steaming the proper way :)

@TomsCoffeeCorner 10 ай бұрын

Awesome! I am glad to hear it, and I hope you have fun experimenting! Tom

@YoungLink18 6 ай бұрын

Hate to bug you, but I recently ran into the same problem, I was tempted to try anyways, however I had issues removing the group head which I assume I would have needed to do to get the old wand out. Any advice?

@arthurl.8899 6 ай бұрын

@@YoungLink18 had the same problem while adding my steam wand which I am currently in the process of doing, I would make sure you took oout all five screws and make sure that the steam wand knob isn’t going through the body of the machine

@ravenouspali Жыл бұрын

awesome vid

@DimHim7473 Жыл бұрын

At the 7th minute I’m sweating like crazy just watching you 😂😂😂😂😂. Well done

@hectorangellujanviera2553 3 ай бұрын

A powerful economical machine

@TealTechie Жыл бұрын

Interesting video! I was surprised it didn't start with the usual disclaimer.🤣

@Petercoffeee Жыл бұрын

It's time to make this modofication on my Dedica !

@bboymickey 6 ай бұрын

I have seen a reddit post adding a pressure gauge and dimmer to control flow rate. Was wondering if you could make a video on that? Love your content. Keep up the good work.

@TomsCoffeeCorner 6 ай бұрын

Well, I did do that for the Dedica - process is similar, at least for the dimmer. Pressure gauge should be just about the same, too. Cheers!

@davidmorrison2694 Жыл бұрын

Perfect Timing! The Ranchillo steam wand is on my counter waiting to go in my ecp3120. Waiting on a dimmer switch to install at same time so I can pre infuse. Hoping the wand helps with my frothing skills. I seem to get decent foam but my latte art skills are poor 😟. I’ll have spent more on mods than for the 3120 🤣

@TreyJustice Жыл бұрын

Can you share the dimmer switch info ?

@julih8425 7 ай бұрын

My rancilio steamwand was just delivered and I’m getting ready to attempt this! I accidentally lost the rubber valve from the stock steamwand on my ECP3420 when I was attempting to wash it! So I saw your video and that the upgrade was possible, but didn’t actually watch the whole thing until now. Probably should’ve done that first. Lol! What the heck I’m gonna try it. Thank you for this video and all of the others. you have pretty much become my go to source for any info that I need. I’m about six months in and still trying to get it right!

@TomsCoffeeCorner 7 ай бұрын

Thanks for the feedback and good luck with the mod! Tom

@julih8425 7 ай бұрын

So it took me two days of working on it here and there, stepping away each time I became frustrated lol. And everything that could’ve went wrong did, but I finally did it. It is definitely better than the stock steam wand, although still waiting for my milk steaming skills to improve. I also want to mention that for The first time in my six month journey of home espresso brewing, I was able to get a bag of fresh roasted espresso from a local roaster. Part of the problem I have had is that I do not have a grinder good enough for espresso. However, this local roasters website gave you the option to have them grind the beans for you. On the drop-down menu, I selected home espresso and figured I would have to make some adjustments regardless. Wouldn’t you know it came perfectly ground at the right size and I was able to brew the perfect shot of espresso for the very first time. I mean Crema,, tiger stripes, 36 g in about 30 seconds - the whole 9 yards! And it made the best latte I’ve ever tasted. For anyone wondering, it’s the miscela bar brew from La Prima in Pittsburgh. I always hear people emphasizing the importance of fresh roasted beans, but I sort of assumed that I had to be doing something else wrong and that was the problem. But it’s actually pretty unbelievable that it makes such a difference! Learning more every day. Now I just need to find a decent grinder on sale. Do you happen to know offhand the cheapest grinder available that would still give me the grind size I need for espresso? It seems to me that it’s going to be around the $200 range. Does that sound right? And thank you again, Tom for the great video!

@829Mc 6 ай бұрын

Julia- How did you work around the clamp holding the steam tubing? It is not a SPRING CLIP that you can use with a pliers!

@julih8425 6 ай бұрын

Improvised lol. That was definitely the worst part. And the most time consuming. I did see where someone mentioned these clamps in the comments, but hoping everything would be like Tom‘s video I wasn’t really prepared for them. But after some trial and error I was able to use needle nose pliers, and a flat head screwdriver to loosen it enough to remove. The only problem is I could not get it to tighten back up when trying to put it back on. I Later learned there is a specific tool for fastening them that I certainly did not have or even know about at that point. So I rummaged around in my garage until I found one of those old fashion hose clamps that you turn the screw to tighten it. However, even the smallest one I had was sort of big and clunky, and after about a week I could feel the steam wand lose a little bit of pressure. So I had to take everything back apart and saw that there was a tiny bit of moisture escaping the end of the hose where I used that clamp. So just for a temporary one time use kind of fix I removed that clamp and fastened the hose with two zip ties until I could get to the store and get an actual new spring clamp and a tool to fasten it with. I ended up purchasing a different clamp then what was on there originally but apparently it’s still considered the same type. Not sure how well I fastened it as I obviously am learning as I go, but since then, so far so good!

@829Mc 6 ай бұрын

@@julih8425 - Thank you for that information. I will order several different size spring clips and give it another try!

@diydermo 2 күн бұрын

More recent models of the Delonghi ECP 3420 (purchased new from Amazon as the seller and Amazon as the shipper in July 2024) have a red hose cover and non-removeable metal clips. Anyone who runs into this, you may want to make sure that you have a pair of clippers that can cut through a metal tiny zip tie sized metal clip + you'll want to buy a replacement hose clip.

@Barak121213 Жыл бұрын

hi Tom! I saw (and performed) you video about the Rancilio on the dedica and also there you had troubles putting the black grip in the wand. I didnt have gloves so I had to think of something else and eventually I did it under running water and it moved like butter. afterwards I squeezed it a bit and dried it for few second but it did the job perfectly.

@TomsCoffeeCorner Жыл бұрын

Thanks for that tip, and for sharing!

@roccol9093 5 ай бұрын

I must have got lucky. Mine slipped right around the curve, not heat, no hammer, no wrench. Just a little twisting and small amount of effort. Thanks for the video.

@martyg.5591 11 ай бұрын

Thanks for this guide! To get the white knurl piece over the curves, water didn't help me, but I cut a 1" section from a piece of clear tubing (the tubing itself was approx. 1" diam) and cut that ring of tubing, so that it could curl onto itself as needed (closing like a hand). With that wrapped around the white knurl, and using a channel-lock plyers, the piece moved pretty easily to its final position. My used ECP3420 did NOT have removeable clips on the hose for the old steam wand... they were "pinch" clamps, which had to be cut off. I found an adjustable clip at home depot that fit (1/4" to 5/8". A bit less forgiving for taking up a bit of space, but it all worked in the end.

@TomsCoffeeCorner 11 ай бұрын

Thanks for posting your tips! Tom

@martyg.5591 11 ай бұрын

@@TomsCoffeeCorner My pleasure. Tom, what is the size and style of screwdriver needed to remove bottom base screws from ECP3420, please?

@TomsCoffeeCorner 11 ай бұрын

@@martyg.5591 Just a flat head screwdriver. You have to find one that fits between the bit in the middle, and the outsides.

@martyg.5591 11 ай бұрын

@@TomsCoffeeCorner Ah, I wish it were so! This used 3420 I picked up on ebay seems to be ancient and unique... from what I can tell from inspection, photos and trying a thin craftsman flat head, the bottom screws on this one doesn't (seem to) have a center slot or outside edge slots... hmmm. (As you may recall, I mentioned my hose clamps were non-removeable "pinch clamps"), and it wouldn't surprise me to find out I'll need a more specialized tool for the bottom screws. If you happen to figure out what the actual tool type and size required is, I'd love to find out. Thanks for your response.

@martyg.5591 11 ай бұрын

I take the above back! I DID find a small-enuf flat head to fit in the "valley" of the bottom screws, and they did begin to turn. Yay! Thanks.

@michaelcampos7273 3 ай бұрын

Do you have a video on how to steam using the Rancilio Wand after install? I just installed one and using the 3 hole cap. Having a difficult time producing creamy milk . Thanks!

@andypemberton4560 7 ай бұрын

Great video, but knowing my record of stripping things down then building back up, I'm going to give this a miss, or get a double female connection and cut externally!

@ritaweygint4038 9 ай бұрын

Wow, that’s a lot of trouble for a steam wand! Makes me happy I don’t like milk drinks. So much easier to open up the Gaggia!

@redfox05nl Жыл бұрын

Thanks for the video, really good, but sadly not enough close up shots of how the different bits fit together. In future if unable to do it on video, I would suggest trying to take photos with a good camera and splicing that into the video later for extra detail.

@TomsCoffeeCorner Жыл бұрын

That's a good idea for next time. Should be clear enough though, as there really isn't much you need to disassemble.

@apigtooter5727 2 ай бұрын

Heat the white nut in hot water and cool the ranchero in the freezer. It goes on way easier

@kellydavis3108 Жыл бұрын

I'm imagining my wife's reaction to me buying a $400+ machine and then getting out tools and a mallet 😅

@HHHPedigrees 8 ай бұрын

This machine is not $400

@squishyflac 3 ай бұрын

If you bought this machine for $400 usd or cad you got swindled

@markbrown9018 9 ай бұрын

You need to do the manometer mod on this machine if possible.

@gianlucaugolini3796 5 ай бұрын

Hi Tom! Nice video like always! Did you try to install a dimmer and a manomether on the ecp 35.31 or another similar model? Thank you so much!

@TomsCoffeeCorner 5 ай бұрын

Nope, not yet I haven't. Maybe in the future. Cheers!

@thercworld4363 Жыл бұрын

Tom, I would light to see closer video capture…. But I love how you explain the procedure. Vielen Dank

@TomsCoffeeCorner Жыл бұрын

Thanks! I have been experimenting with multi camera setups. The one above is not ideal, because I cannot see its screen, and also sometimes my head is in the way. But I will try to make that better next time. If that's what you mean?

@thercworld4363 Жыл бұрын

Yes, from your camera angle is not so good to see the details. But thanks for inspiring us to improve our espresso machine. Nur weiter so😊

@vapoureyes Жыл бұрын

Would it better to warm the end of the hose in hot water to make it easier to get over the hump .🤔

@gizmo1252000 Жыл бұрын

luckily i bought 31 21 with this already done ,by the previous owner :)

@TomsCoffeeCorner Жыл бұрын

Haha, even better!

@user-ph6nb8ib5e 8 ай бұрын

Met some problem with my ecp3420. The iron clip that hold the tube is different from the video, which is so hard to put it back. So I use cable tie as an alternative. The steam is good at first few second but gradually declined without seeing things leaking.

@TomsCoffeeCorner 8 ай бұрын

Hmm, well it might be leaking if you're losing power, or your boiler could be running out of steam. You can sometimes reuse those hose clips, or you can look for a small hose clamp from the hardware store.

@MrSinghYYZ 7 ай бұрын

Pro tip: if you are not able to slide the white plastic ball, just make a cut on side, it becomes 1000x easier

@timothyleonard5056 9 ай бұрын

Thanks for showing us this mod. I was frustrated and annoyed just watching you perform it. I will never ever attempt this. LOL!

@TomsCoffeeCorner 9 ай бұрын

No worries!

@rkm9100 16 күн бұрын

Hi - I have just done the mod and am struggling to get any pressure out of the wand, any ideas or hints would be appreciated??

@ericbaluya361 Жыл бұрын

It puzzles me that Delonghi is not including a proper steam wand when its obviously an easy fix.

@noahmn4985 Жыл бұрын

Standard one is easier for most of this machine buyers who are beginners

@richardt5472 3 ай бұрын

I plan on doing this mod thanks Tom. Has anyone done a mod to add a small LED inside pointed at the water tank that would illuminate once the machine is switched on? I find it difficult to see the amount of water remaining

@ds-yn4bp Жыл бұрын

Hi Tom! I love your content. Do you think it could be posible to mod de Delonghi Dedica with a 3 way solenoid valve? I believe its the only thing missing to make this the perfect machine for small apartments

@Max-wl5ll Жыл бұрын

Wouldn't that be insanely hard to do? I think saving up for a second hand breville bambino would be way better

@TomsCoffeeCorner Жыл бұрын

Honestly, I wouldn't install one. It's one of the things that draws me back to the Delonghi's, even after using much more expensive machines. Since Delonghi has no 3 way valve, the pressure stays on the puck, and you have to wait about 60 seconds to remove it, BUT, the pucks knock out cleaner than ANY other machine I have ever used. That is such an ergonomic advantage for me, that I keep coming back to the Dedica, ECP, and so on.

@dipeshpankhania 11 ай бұрын

Great video! I just did the mod to my Stilosa, far easier than this machine. Did have the same issue with the white plastic bit but a little warming with a heat gun, went over very easy. The power of the steam is crazy in comparison. Heats milk so fast! I need to tune back into using this wand to get my milk perfect. Great modification! Interestingly, the prices of these wands vary by about 50%. I got the more expensive one and the finish was perfect but I do wonder if the cheaper ones are of the same quality.

@TomsCoffeeCorner 11 ай бұрын

Thanks for sharing! I agree, steaming like this is way better! Cheers, Tom

@justincu3541 7 ай бұрын

Hi! I;m currently trying to switch out my steam wand and I'm having trouble even opening the facia. How did you open yours? Is there anyway to contact you to help more?

@graysonkoehler9377 5 ай бұрын

Let’s go upgrading my stilosa in 2 days just ordered it on Amazon glad to hear it’s a bit easier. I’ll heat up the ball and should be set cheers

@d4rk_entityy 10 ай бұрын

hi tom, got an idea, i think there's a potential to increase the steam pressure even more by changing the thermostat to a higher one. what do you think? i want to be able to temp surf like in gaggia. however i think the temp is too low to be able to do that. ecp probably only could heat up up to 125 degress

@TomsCoffeeCorner 10 ай бұрын

I don't know about that. I mean you could. I get a TON of steam power in its stock configuration. Just start steaming before the thermostat is met, and then you will have more than enough steam power.

@TreyJustice Жыл бұрын

Tom will you do a dimmer switch demo on this machine

@TomsCoffeeCorner Жыл бұрын

I am thinking about it...most dimmers are so large. I am looking for a more discrete one. Do you have a suggestion? Which market are you in? Dimmer designs differ based on country.

@tuomaslindroos5225 Ай бұрын

I did it but now the steam wand is really loose. what can i do to make it firm again?

@dingnextstop Жыл бұрын

Hi Tom, would you say this Delonghi range is “better” than the Dedica? Also is the portafilter similar size and could I use the IMS basket from my Dedica?

@TomsCoffeeCorner Жыл бұрын

Hi Andrews, I like the ECP range better, if I am honest. I get a real kick out of the ECP 35.31 that I have. Yes, the IMS basket fits in ALL Delonghis: Dedica, ECP, EC, La Specialista, etc.

@Dracula6789 8 ай бұрын

Hey Tom, would you recommend the 3630 the most? I'm just assuming that the higher number means "better"? Is there any other machines within the same price range you would recommend or rather go for?

@TomsCoffeeCorner 8 ай бұрын

The ECP3630 is an ECP3420 but with metal sides. Yes, I still very much like this little machine.

@lizpadilla2760 Жыл бұрын

Hello there Tom!! Would ir be possible to change the wand on a La Specialista EC9335BK, with the same procedure here??? Have a wonderful week🤗

@TomsCoffeeCorner Жыл бұрын

Hi there! The newer versions of the La Specialista already has the nicer "Arte" steam wand, but the older ones didn't I guess. The procedure will likely be both similar and different. I made a video on how to take apart a La Specialista, maybe that will help: kzfaq.info/get/bejne/hNenpZSWstivl2w.html

@panoskar224 5 ай бұрын

Great Video !!! I have 2 questions : 1) I have the Delonghi ECP 35.31 , very similar to yours, Can I also upgrade the steam wand as well ? 2) I also want to upgrade to portafilter but I don't know which is compatible to ECP 35.31. Do you have any suggestion ?

@folmore7627 Ай бұрын

1) ECP 3420 = ECP 35.31, they are the same 2) all of delonghi's machine use 51mm afaik

@kimbryan32 Жыл бұрын

Hi Tom! I have a 1Zpresso J-Max and I'm looking for a bang-for-the-buck espresso machine. Which one do you recommend, Delonghi ECP 3420 or Delonghi Stilosa EC260? I'm also planning to make the "Advance Mode" in whichever. TIA

@TomsCoffeeCorner Жыл бұрын

I give the ECP the edge over the EC260, but they are almost the same.

@porcovacco193 6 ай бұрын

I have the 33.21 model, can the advanced mode be done? I noticed that the panarello is shorter than all the other models. Thank you and Merry xmas Tom!

@TomsCoffeeCorner 6 ай бұрын

You can do it, but that shorter nozzle requires a little more finesse in the frothing.

@hersheyphoto2011 10 ай бұрын

Nice Video! Is the Rancilio Steam Wand going to get a lot better results Vs. your other method of simply removing the Panarello part and add the Zip Tie? I'm getting goos milk results with the simple method of just removing the panrllo. Thanks!

@TomsCoffeeCorner 10 ай бұрын

No, if you get good results like that, you can leave it. The Rancilio allows you to get deeper into the milk pitcher though.

@hersheyphoto2011 10 ай бұрын

Thank you! Also easier to clean the rubber built in one ( without panarello )

@spartan9212 Жыл бұрын

Hi Tom one more question for you. After seeing your review I was considering upgrading to the Breville Duo temp pro from my ECP 3121 which I got for $20 on market place and have enjoyed pulling apart & playing with. In your opinion is it a worthwhile upgrade? Does the duo temp Pro pull a better shot or steam the milk better?

@TomsCoffeeCorner Жыл бұрын

Hmm, the Duo Temp Pro is a nice machine, with a PID (non settable). But to be honest, I do not find the espresso or milk steaming much better. I have gotten excellent shots from the ECP. I'd have to experiment more with the Duo Temp Pro however. I think it would be more of a side step. Your next machine should be one in which you can adjust the PID temp to whatever you want, like the Lelit Grace.

@spartan9212 Жыл бұрын

@@TomsCoffeeCornerThanks Tom 👍🏼

@redfox05nl Жыл бұрын

I thought these also had PID controlled temp? I've got the ECP35.31

@TomsCoffeeCorner Жыл бұрын

@@redfox05nl No. Thermostats.

@p_dubski Жыл бұрын

Tom, great vid! This is my exact setup (paired with a Kingrinder K4). I can confirm that the mod was harder than expected, but worth it. I’m very curious - how much better is espresso from fancy machines like the Lelits you recently tested? I’ve reached a point where I feel like I need to spend 10x more on my setup, to (maybe) get 10% better results. Is this right? The only things I feel I’m missing are pre-infusion and better temp control, which would help with shot consistency.

@adamnealis Жыл бұрын

Is there a PID solution for your machine? My Ms Silvia PID does pre-infusion and temp control.

@p_dubski Жыл бұрын

@@adamnealis not really looking to mod my machine further, I’m quite happy with the coffee it makes. I’m just interested to hear how much better I can expect my espresso to get if I go all-out and upgrade to a prosumer machine. Tom is (literally) using the exact setup as me, so I’d love to get his thoughts

@davidmorrison2694 Жыл бұрын

@@p_dubski I’ve also got this exact setup with the K4 grinder and a ecp3120. The rancillo steam wand is on my counter and plan to do dimmer mod at same time to be able to pre infuse.

@TomsCoffeeCorner Жыл бұрын

Hi Patrick, well that probably depends on your palate. I think you get get really good shots out of the ECP, if it is heated up for a while, and if you have good puck prep and good beans - but that goes for all espresso machines. Does the espresso get markedly better in my opinion on a $500 or $1000 machine? Not really for my palate, no. But the $20k machines that are heated up all day and have temp and pressure profiling do make a more syrupy and sweeter espresso. In the end, I think the bean is the most important, then the pressure (shouldn't be too high), then appropriate heat. These little machines do damn good for their size and price.

@p_dubski Жыл бұрын

@@TomsCoffeeCorner Much appreciate the reply - as with most hobbies, it's easy to get carried away and constantly look for the next shiny object. Keep up the good work!

@peggychen90 6 ай бұрын

Do you have experience in changing the steam wand for Breville Roma espresso machine? I’ve looked everywhere to know if I can change the short wand to a good long legit one. Thanks!! 😊

@TomsCoffeeCorner 6 ай бұрын

Nope, sorry!

@peggychen90 6 ай бұрын

Thank you! Your videos are very helpful. 😊

@alonsorobles599 Жыл бұрын

Any tips for getting the white nut off the original steam wand? I literally feel like I'm going to break it. I've resorted to whacking with a hammer and trying to twist it off.

@TomsCoffeeCorner Жыл бұрын

You could persuade it with a wrench, and pry it off.

@heatherdainas7905 6 ай бұрын

I have the replacement Rancilio Silvia wand, and took it apart today. The line that’s connected to the wand looks different on my ECP 3634. I’m afraid I’ll do more damage than upgrading so I just put everything back together. I’m afraid to try again.

@TomsCoffeeCorner 6 ай бұрын

It might be a braided hose. I think those require a new hose clamp to reattach. Cheers!

@Ms4uva4ok 2 ай бұрын

Красавчик

@moose234a56hy Жыл бұрын

Thanks Tom. Do you think this will work on the EC 260?

@TomsCoffeeCorner Жыл бұрын

Yes sir!

@kieranju Жыл бұрын

I just did this mod to my EC260BK after seeing many recommendations for it on similar machines. It is indeed just as painful of a process to get the white plastic nut up into the correct spot. In fact, I tried sanding down the inside of the nut to open up more space but I would highly recommend not doing this because it’s important for the wand to sit snug in the nut so it can spin and rotate properly. I think olive oil and nitrile-coated work gloves are mandatory… Also you may find that the hose in the EC260 has a red braided sleeve to help protect it from damage which is nice! However mine had PEX clamps instead of spring clamps securing the hose. After removing those I wasn’t able to reuse them… I ended up buying worm gear clamps but would much prefer those spring clamps if you can find any that fit properly. But it’s truly a night and day difference from the stock steam wand… good luck!

@moose234a56hy Жыл бұрын

@@kieranju thank you so much for your input/thoughts. I might one day draw up the courage to do this. Tom’s hack with the cable tie once you take of the pannarello wand is working sufficiently.

@justincu3541 7 ай бұрын

@@kieranjuHey! Did you purchase the same steam wand replacement? On Amazon, there is an “Old” and “New” version of the Rancilio.

@user-rf9xe6fs8f Жыл бұрын

how do you fix the frother not working? Delonghi ECP 3420. will replacing it do the trick? I am also not sure which wand to choose when I clicked on the link you have.

@TomsCoffeeCorner Жыл бұрын

If your machine isn't steaming properly, it could be the pump, the OPV, or the steam valve itself.

@TheHamburglar7 Жыл бұрын

Hey Tom - thank you for the awesome content as always. I currently have an ECP 3630 with stock wand (in "advance mode"). After pulling a shot, I switch to steam mode and just before ready light comes on, I purge valve for a few seconds prior to steaming milk. I noticed that even after I purge for a few seconds, a little bit of water continues to come out for up to 25 seconds with steam. Is this normal? I have measured that comes out with steam AFTER purging for a few seconds and steaming for 35 seconds, and it's about 25 ML that get's added to milk. Water coming out with steam is also a little intermittent, almost like stuttering. My milk comes out watery at times and I feel this may be contributing to it. Any help is appreciated!

@TomsCoffeeCorner Жыл бұрын

Hi there! Well, if you wait for the steam to become completely dry, it's gonna take a while, with ANY boiler machine in my experience. I'd just go for a happy medium, and purge out the majority without having to spend too much time doing so. Cheers!

@michaelflanders2876 5 ай бұрын

Howdy pall! I have been using my ECP3630 for a month now. What I have found is that the first run of steam after going from shot mode to steam mode is weak and wet. What I have been doing is the following “hacking” process. Start by pulling your shot, then switching to steam mode. Wait until the temperature light turns green telling you the boiler is up to temp. Now, open the steam valve while holding a rag beneath the steam wand. Let it purge until it completely is out of pressure and the green temperature light turns off. This should take about 30-60 seconds. Now, turn off the steam wand and let the boiler come back on. Wait an additional 30 seconds until the green temperature light turns on a second time and then, get to actually steaming. What you will find with this method is that the steam pressure will be SUBSTANTIALLY higher and will run at this high pressure almost indefinitely. The steam the second time the boiler fills is also very dry, and will not spit out water. Why this works is beyond me. Possibly the heating element is not strong enough in these little machines to turn all the water already inside the boiler at “shot temp” and heat it up to “steam temp”. Perhaps when you purge all of this water out of the system the boiler is able to actually get screaming hot and subsequently turns every bit of water introduced to it by the pump into high quality dry steam. Whatever the case may be, it works if your patient. Some day I hope we will both be able to upgrade to a Rancillio Silva. Until that day, hack until you break the thing!

@carlosrsosav 7 ай бұрын

Hello, I would like to know if, this change can be applied to the Delonghi Stilosa EC260?

@TomsCoffeeCorner 7 ай бұрын

Yes, it ought to be just about the same.

@splithammond 8 ай бұрын

I want to do this to my two day old Magnifa S Smart - Is this possible? I really really need a proper steam wand

@TomsCoffeeCorner 8 ай бұрын

Boy, I'm not sure about that one. Could be similar but the build is different. You'd have to take the housing off and have a look. Cheers!

@ericbaluya361 Жыл бұрын

How about a mod using compression brass fitting female to female connector.

@TomsCoffeeCorner Жыл бұрын

Hey Eric, what would you use the fitting for?

@ericbaluya361 Жыл бұрын

@@TomsCoffeeCorner I saw in another video they replaced the magnifica steam wand using rancilio and a compression connector.

@Phantoma3 Жыл бұрын

Could this machine handle a 3-hole nozzle on that Rancilio steam wand?

@TomsCoffeeCorner Жыл бұрын

I think so. This thing pumps out the steam, at least my model does!

@m.e.9299 5 ай бұрын

There are multiple wands listed on Amazon, none for the ECP 35.31 any suggestions on which wand to get? I think it is the V1/V2

@TomsCoffeeCorner 4 ай бұрын

That's true, it is confusing. AFAIK, both V1 and V2 will work. This is the exact one I ordered here: amzn.to/3ThdRCS

@mltamarlin Жыл бұрын

Thank you!! Can't you just cut the plastic ball a bit? Its function is only to let the wand rotate, right?

@TomsCoffeeCorner Жыл бұрын

I wouldn't recommend altering the plastic holder, it's a press fit.

@mltamarlin 11 ай бұрын

@@TomsCoffeeCornerThanks! I followed your directions, but did cut the plastic holder. This made things much easier, and ,as far as I can tell, had no ill effects.

@zookini 6 ай бұрын

So much effort for little change in result

@bryanabraham34 4 ай бұрын

Looks like the steamwand tips has 1 hole. Can the delonghi machine power handle the 3 holes steamwand tips?

@TomsCoffeeCorner 4 ай бұрын

I think the ECP could, yes.

@captainfach 11 ай бұрын

I may be unknowledgable, but what is the benefit of changing the steam wand?

@TomsCoffeeCorner 11 ай бұрын

You can just steam milk a bit better, and get deeper into the pitcher.

@zdrett 10 ай бұрын

Hello there! I wanted to know, just in case if I'd break the plastic nut, if we can find this single part on internet? I couldn't find it anywhere

@TomsCoffeeCorner 10 ай бұрын

If you live in Europe: www.juraprofi.de/DeLonghi-Ersatzteile/Milchaufschaeumer/Gelenk-Dampfrohr-fuer-DeLonghi-Espressomaschine::19771.html

@zdrett 10 ай бұрын

@@TomsCoffeeCorner thank you very much, you're amazing 🙌

@adamnealis Жыл бұрын

I was wondering if and when the hammer would appear...

@TomsCoffeeCorner Жыл бұрын

Just a little love tap... :)

@MekaalGodhwani Жыл бұрын

Can I do this to my Delonghi Ecam 22.110.b ? 😁

@TomsCoffeeCorner Жыл бұрын

You might be able to. I have not opened up one of those yet.

@IRISHTRETTO Ай бұрын

Hey Tom! Great video thank you! I am new to espresso machines, I bought this one and my stock steam wand was not producing good steamed milk, so I just installed the Rancilio this evening, and I realized the issue is more than just the steam wand. When the machine is ready, it does not put all that steam like yours does! A little bit of steam comes out and then it’s basically hot air. It also does not have the same power that yours has. Any ideas what’s going on?

@TomsCoffeeCorner Ай бұрын

Make sure not to wait until the light comes on. Just switch to steam mode, wait 10 seconds, and let her rip!

@mfarhansj 26 күн бұрын

Hi, I also the same issue with my EC230.BK machine. The steam is not as strong as Tom's. I tried to follow Tom's suggesstion by not to wait until the light comes on. I found that there's a slight improvement on the steam power, but still not powerfull enough. Also, I notice that the steam is getting more stronger after like 30-40 seconds. Unfortunately, I can't continue frothing as the milk/jug become too hot for my palm. Any other tips that I could try to improve the steam?

@IRISHTRETTO 25 күн бұрын

@@mfarhansj I called the company, they sent me a new one

@mfarhansj 24 күн бұрын

@@IRISHTRETTO a new machine or steam wand? Anyway, after several trial and inspection for any leaking/blockage, I decided to reinstall the original wand as (in my case) it produces a better result (due to stronger steam flow). However, prior reinstall the original wand, I noticed that the hole at the tip of the original wand is smaller a few micrometers. Perhaps this has some impact to the steam flow...Nevertheless, my replacement steam wand is a rancilio-like one, definetly the quality not as good as the original one 😅

@829Mc 6 ай бұрын

Tom- The 3240 does not have spring clips to remove the steam hose. It has a crimp clamp! How do we work around it?

@TomsCoffeeCorner 6 ай бұрын

Some vintages have different types of clamps. You might have to pry it off. If you're lucky you maybe able to re-use it, otherwise you'll have to find a small hose clamp. Good luck!

@ze_ep 3 ай бұрын

The single-ear clamp comes off easily, just wedge a small flat screwdriver blade into the end near the little tabs and twist. Not sure what to replace it with though..

@lowrencetheko1652 8 ай бұрын

Hi Tom can I fit it to a delonghi laspecialista

@TomsCoffeeCorner 8 ай бұрын

Hmm, I don't think so. Not easily anyway. But the newer Specialistas have good steam wands anyway. Cheers!

@Decipher34 2 ай бұрын

Does this work on EC260BK model?

@TomsCoffeeCorner 2 ай бұрын

It should - I did it to the ECP31.21, which is almost the same.

@richiesantos789 9 ай бұрын

the rancilio wand is also fit in delonghi ec3121??

@TomsCoffeeCorner 9 ай бұрын

Do you mean ECP 3120? If so, then yes.

@hectorangellujanviera2553 3 ай бұрын

I imagine that if I had a machine just for fun, I removed the internal machinery and made its drawer out of wood, I would customize the entire machine in wood.😅

@awesomemanspiff 8 ай бұрын

Would this work for the delonghi 3630 as well??

@TomsCoffeeCorner 8 ай бұрын

Yes, it's just the same.

@awesomemanspiff 8 ай бұрын

@@TomsCoffeeCorner awesome thank you! May just need to try this out!!

@chedda8210 9 ай бұрын

Im in a pickle, the collar piece that keeps the steam wand in place so it swivels is broken!! I even super glued it and everything and i tried to screw it in again and it snapped, idk what to do anymore :/, but if theres nothing to be done than so be :(

@TomsCoffeeCorner 9 ай бұрын

I found the part here: www.juraprofi.de/DeLonghi-Ersatzteile/Milchaufschaeumer/Gelenk-Dampfrohr-fuer-DeLonghi-Espressomaschine::19771.html

@rherrera209 7 ай бұрын

Can this mod be done for a Delonghi Stilosa EC260 machine?

@justincu3541 7 ай бұрын

I was looking for this comment, I got the Stilosa as a gift and would LOVE if i could upgrade it too!

@TomsCoffeeCorner 7 ай бұрын

Yes, it's basically the same.

@eagleofnight7760 6 ай бұрын

Any suggest for stilosa ec235.bk? Can i setup your new steam wand on ec235.bk?

@TomsCoffeeCorner 5 ай бұрын

That should be possible too. Very similar machines.

@eagleofnight7760 5 ай бұрын

thx a lot @@TomsCoffeeCorner

@micoreyes856 8 ай бұрын

Can this be done to EC260bk?

@TomsCoffeeCorner 8 ай бұрын

Yes, should be very similar.

@diagarcia59 6 ай бұрын

Mane a video of this with a Stilosa

@TomsCoffeeCorner 6 ай бұрын

It's really about the same. The machines are mechanically just about the same design. Cheers!

@hafj9939 Жыл бұрын

My EC155 ruined trying to change the wand and i had to buy a new machine 😅

@TomsCoffeeCorner Жыл бұрын

Oh crap!

@JAYETRUCKING 8 ай бұрын

What kind of espresso machine does he use!

@TomsCoffeeCorner 8 ай бұрын

I use all sorts of espresso machines. I have too many!

@GetRevived3 Жыл бұрын

Before I watched the video I wanted to do the change, after I watched the video, I decided to not to do it. LOL

@TomsCoffeeCorner Жыл бұрын

Haha, I purposely left some of my mistakes in, so you guys can learn from my blunders. Maybe watch it once or twice more, and then you will feel confident to do it. I could probably do it in like 30 minutes now, after having learned from my mistakes. It took me 75 minutes the first time. But that includes making video adjustments, grabbing tools, etc.

@martinMAY15 Жыл бұрын

someone knows if it works on a delonghi stilosa EC260BK

@TomsCoffeeCorner Жыл бұрын

Should be very similar, but the housing is likely a little different to open up.

@mfarhansj Ай бұрын

it works with EC230BK. However, the power of the steam seems reduced very quickly; so I can only get strong steam for about 4-5 seconds. Im wondering whether this is a kind of EC230BK's minus point or there's something that I need to tweak