TONEX ONE TUTORIAL ||| How To Use It? (Controls, Navigation, Editing Presets)

Рет қаралды 13,165

Күн бұрын

🔶 Get ToneX One Pedal: thmn.to/thoprod/586125?offid=...
➡️ My Tonex Presets: galtonestudio.bigcartel.com
Here's a part one of my ToneX One tutorial - focused on basics of ToneX One. I tried my best to keep it as simple as possible, but if you have any problems, feel free to leave a comment! Hope you'll enjoy it! :)
🔶ToneX One Quick Start Guide (IK Multimedia): www.ikmultimedia.com/products...
➡️Free Tone Models: www.tone.net/tonex/users/galt...
➡️Facebook: / galtonestudio
➡️ ToneX Presets: galtonestudio.bigcartel.com/c...
➡️ Kemper Profiles: galtonestudio.bigcartel.com/c...
➡️ Valeton GP-200 Presets: galtonestudio.bigcartel.com/c...
➡️ Line6 Helix Presets: galtonestudio.bigcartel.com/c...
➡️ Hotone Ampero Presets: galtonestudio.bigcartel.com/c...
➡️ Other Presets: galtonestudio.bigcartel.com/c...
Recommended Gear (Thomann):
🎸Support the channel: www.thomann.de/intl/index.htm...
🎸Gear That I Use: thmn.to/thocf/bpg7c9yz9v
🎸Recommended Cheap Guitars: thmn.to/thocf/0yckrip89a
0:00 Intro
0:17 IK Product Manager
0:58 Hooking Up ToneX Pedal and Opening ToneX App
1:29 Stock Presets Demo
2:48 Basic Parameters (Volume, EQ)
3:43 Additional Parameters (Gate, Comp, Verb)
4:16 Basic Preset Editing
5:43 Tuner
6:15 Performance Modes
7:26 Changing Presets on pedal (+ 3 preset HACK)
9:11 Global Setup
11:49 Safe Mode
12:09 Importing presets from ToneNet
14:10 More Preset Editing
15:27 Even More Presets!
17:11 Summary

Пікірлер: 87

@sootyfoot 20 күн бұрын

Hi. I have this pedal arriving tomorrow, is it simply just plug it into my pc and I'm good to go or have I got to download or install stuff on my pc for the pedal to work. Thanks in advance

@galtonestudio 20 күн бұрын

Hello! You need to register to IK multimedia, download IK product manager and proceed with the video :) I said update (for existing tonex users like myself - my mistake), basically you have to install ToneX LE (version of tonex that you'll get with tonex one). Apart from that everything should work exactly the same. I'll pin this comment just in case anyone would have the same problem. Cheers!

@sootyfoot 20 күн бұрын

@@galtonestudio so once the pedal arrives, I plug it into my pc. And it will have on my screen instructions on what to install/download etc, Is that right?

@galtonestudio 20 күн бұрын

@@sootyfoot no, you will have to follow my tutorial or manual. It will not guide you, unluckily.

@steveinman1512 14 күн бұрын

@@galtonestudio As I just posted in my comment, this video is a "must watch" tutorial, as the IK folks seem to not provide anything remotely helpful like this. I did find a link in the Product Manager's "Help" section called "Video Tutorial" and another called "FAQ" But when I click these -- NOTHING HAPPENS AT ALL. So. I have a very low opinion of IK's documentation at the present time. The TONEX ONE PRODUCT, however, seems very capable. Thanks for providing a video that helped me get things working -- at least to the point where I can start to use it -- load/edit/change preset choices, etc. Without your video, I would be soon returning the Tonex One to the vendor.

@justice100forwin2 3 күн бұрын

Great video really informative!

@HeathWatts Ай бұрын

Great video. Thanks!

@marcverstappen4990 Ай бұрын

Very clear and comprehensive explanation. I was confused on how to adjust the tones other than the dials. your video helped me solve that one, so thanks :) To bad it doesn't have a midi in. But for the price I'm really impressed of what it can do. Keep up the great work you do.

@galtonestudio Ай бұрын

Thank you!

@jackprice7828 6 күн бұрын

Thank you for this video! I just purchased the ToneX 1. Having used a Line 6 HX Stomp for about 6 years. It took some education to get used to the ToneX app. Your video helped. I interfaced the ToneX thru my HX loop. The capture models available sound incredible. Still learning

@lukaslmguitarcorner Ай бұрын

Very helpful video. Cheers

@phatlam9064 Ай бұрын

Great video!

@CharLessMajor7Music Ай бұрын

I just watched this video to learn how to use my tonex one and then realized that the mayer pack that I actually liked using was your preset. Wow, it was one of the best cleans Ive tried in tonex. Thank you for that!

@galtonestudio Ай бұрын

Thanks a lot! :)

@BLVDKnight Ай бұрын

Easiest video to learn from! Well Done!!

@galtonestudio Ай бұрын

Thanks!

@ElricX Ай бұрын

Thank you for this! I just bought the ToneX One this afternoon and was getting a little frustrated.

@Stratman5150 Ай бұрын

Great demo, it answered some of the questions I had about the pedal. I'm going to stick with the full size pedal, there's just a little less that you have to remember with the dedicated on board dials and such. If they ever come out with a Tonex with built in delays and modulation effects, they can take me money! I've also tried some of your captures, they're great! Thanks so much for sharing them.

@galtonestudio Ай бұрын

Thanks! :) I'm also waiting for a bigger version with even basic delay, but to be honest - One is great for me, mostly because I can take it anywhere and it's way more advanced than I expected (but it has it's limitations that may be a dealbreaker for some people). P.S. To be honest, navigating was kinda confusing but after a few hours they are actually quite easy to remember :)

@hexoflexo Ай бұрын

Just got my Tonex One and this video helps me a lot, thank you! I agree that the stock presets sound kind of boomy especially when playing lower notes. Got some free captures from tone net that I already prefer. Might try some of your presets as well. Cheers

@hexoflexo Ай бұрын

I just noticed, that i first downloaded your mayer preset, which i immediatlly liked so much more than the stock presets :D

@steveinman1512 14 күн бұрын

This tutorial video is a true lifesaver for initial Tonex One users. This was my first pedal that required computer interface and the IK folks have done a really poor job of providing any sort of helpful context and a simple video like yours as a "jump-start". THANK YOU!! I was starting to feel very much like @benspeeds with his colorful comment added a month ago, and I am no stranger to computers or software, having spent 43 years in an engineering field -- enough time to be confident when judging this product documentation as NOT being user friendly. I was seriously considering returning this product until I watched your video. Well done.

@galtonestudio 14 күн бұрын

Thanks a lot! :)

@JimmyKay1976 29 күн бұрын

Great tutorial! Where do you set the knobs on the pedal when editing a preset for further tweaking when its used with amplifier or FRFR. Would they be in the middle, for example, if I wanted to add or subtract bass, treble etc. Thanks again! Liked & subscribed

@benspeeds Ай бұрын

I have never been so confused and overwhelmed when entering into a new software ecosystem. ToneNET?Amplitube 5? The fucking Librarian? Ik product manager? TONEX SE OR AMPLITUBE SE? HOW BOUT AMPLITUBE 5 CUSTOM SHOP? WHAT IN THE ACTUAL FUCK IS EVEN HAPPENING!??? This is TRULY a CLUSTERFUCK!

@jacobbutt6091 Ай бұрын

Completely agree! Their instructions are so unclear 😖

@ralphmuller6040 Ай бұрын

I'm with you!

@steveinman1512 14 күн бұрын

A very accurate description of exactly how I felt until I found this video. And I still need to go read a hundred plus pages of manuals to start to feel remotely comfortable. But without this tutorial video, I would definitely be returning this product.

@caimribamusic 6 күн бұрын

🤣🤣

@liamhemmings9039 3 күн бұрын

I agree, I was totally lost.

@Clive007 24 күн бұрын

Just a note: Only need to "download the Drivers" if you are using Windows. They are not required for Mac.

@sootyfoot 20 күн бұрын

Do the drivers open up on the screen once I plug the tonex one into the pc, and from there I install them

@BobbyHarrisonGuitar Ай бұрын

Great tutorial. Thank you. My Tonex One arrived yesterday and I'm already considering returning it. For some reason, I'm unable to edit presets with the software, which means I'm stuck with just one reverb or compressor parameter on the pedal itself. All I can do in the Librarian is switch between whatever I have assigned to presets 1 & 2. Seems like driver issue, but there aren't drivers available for Mac (I don't think they're needed). It's already a really bad user experience.

@galtonestudio Ай бұрын

That's very weird. Probably your best bet would be to wait for IK support, but that sucks. Unluckily I can't really help since I'm a windows user. Overall I think it's worth the hassle but i totally get the frustration. It's really annoying software when you're starting out.

@BobbyHarrisonGuitar Ай бұрын

@@galtonestudio Yeah, it's frustrating. I spent a bit more time with the Tonex this afternoon and managed to get a couple of very useable sounds, while doing all my editing on the pedal, but it's baffling that the software doesn't appear to be working properly. Maybe I should reinstall it.

@ralphmuller6040 Ай бұрын

I've just started editing with my new Tonex (arrived yesterday) but I'm finding it REALLY hard going. I'm a actually a Fractal/Line 6 user. This is a fly-rig backup for me. The editing software leaves A LOT to be desired. Not intuitive at all. Your video is helping, thanks.

@koscharoehre 15 күн бұрын

Hi, how do you connect your guitar an pc and set the audio settings to hear both what is on your computer and on the padel?

@steveinman1512 14 күн бұрын

I'm not certain yet, but this may be helpful: Once you download and install the Tonex SE software, you will find an icon in the upper right corner of the main display window (3 parallel, horizontal lines). When you click this, the pop-up window that appears has an "Audio Settings" tab that has options which appear to control these settings. I believe you can select "the right options" (whichever these are), then plug your guitar into your Tonex, and (hopefully), the sound will then come out of your PC speakers. Use good monitor speakers for better results. Good luck, and please reply back here if you find this to work for you, so others will know my guess is correct.

@formercakid Ай бұрын

If you are using the Tonex ap and you make modifications at the Tonex One pedal to the BASS/TREBLE/ETC. do those changes propagate over to the preset that may be stored in a folder or where the preset resides in the 20 presets area?

@galtonestudio Ай бұрын

I will have to check it since i'm not in a studio currently, but if i remember correctly if you create a folder and drag/drop preset from tonex one librarian to that folder on PC, those 'new presets will have a setting that you created on device. But I'd have to check it out to be sure, to be honest editing presets on tonex one is quite painful. To be honest the best way to edit presets right now since there's no real time editor (sigh) - is to basically use any audio interface, Use Line Out 1 or 2 to send signal from tonex to poweramp, FRFR or return of tube amp depending on setup, and edit presets in real time from PC (and later transfer them to tonex one). I'll probably make a video about it next week.

@formercakid Ай бұрын

@@galtonestudio IK Multimedia replied with this: You need to transfer Tone Models to and from the software, it is a Librarian not a live editor.

@thisisme4858 15 күн бұрын

Hello again. So when the pedal isn’t plugged into the computer I cannot browse the 20 presets?. When using the pedal only I have a choice between 3 slots?

@steveinman1512 14 күн бұрын

It looks like you typically can chose the A/B mode (2 slots) or stomp mode (on/off, one slot), except that this video shows a clever trick I was unaware of, that lets you access three slots instead of 2. I saw another video where they showed a somewhat cumbersome way to select from the 20 presets that can be stored in the Tonex One, but there is no display other than the colors of the 3 micro knobs to indicate what you are selecting -- that and your ears. So you would need to use some clever combination of the colors you assign to various patches, or a clever ordering of the 20 memory slots, as a mnemonic device, to help you find what you want. However, this procedure is a bit time consuming -- slower than simply stomping the foot switch.

@longnailsareok Ай бұрын

I took this to church the day after I got it. I'd worked with a bunch of presents and thought it was good. When I opened it up at church it was blinking and I freaked out, thought something was wrong. Relieved to see it still worked, but then when I messed with my EQ I couldn't understand why it kept sounding worse. Then I finally realized it was alt mode from this video and I'd cranked the reverb to 100 🤦🏻‍♂

@galtonestudio Ай бұрын

Haha, sorry to hear that, but i can imagine the terror! I think if i'd take it to gig i'd try not to mess with any controls, both tonex units are kinda meh in terms of "ease of use" onstage.

@TheOfficialManuelBurnett 29 күн бұрын

Sweet sounding guitar. Samick Malibu?

@galtonestudio 29 күн бұрын

Yeah, it is actually my first guitar, quite heavily modified :)

@TheOfficialManuelBurnett 29 күн бұрын

@@galtonestudioit definitely has a super silver sky vibe to it, if that’s a thing.

@colbyclark8069 27 күн бұрын

Also. I can’t seem to figure out how to change settings on tonex and have it be real time. No matter what I do I can’t adjust anything. I can’t change reverb types or anything. Nothing goes to the pedal while being connected. Even though I can get preset amp changes to work

@galtonestudio 27 күн бұрын

Have you seen 5:00? As i said there's no real time editor in tonex, it makes no sense to edit presets with tonex plugged in to be honest. Check out my newest video about editing presets.

@colbyclark8069 27 күн бұрын

I’ve seen other videos where they are controlling the pedal and tonex one in real time. I’m confused

@sootyfoot 27 күн бұрын

Hi where do I get the tonex librarian that's in front of you. Is it an app I've no idea. Thanks

@galtonestudio 27 күн бұрын

Yes, in a standalone app there's a librarian tab - it will open once you plug your tonex one with usb C cable into PC.

@sootyfoot 27 күн бұрын

Many thanks. The pedal costs £179.will I need to pay out for anything else after that

@galtonestudio 27 күн бұрын

@@sootyfoot No, to be honest tonenet has a lot of great tones that you can download for free. I sell 3rd party packs of my presets, as well as many other people but they are not necessary. But I'd highly recommend downloading tones from ToneNet for free - they are WAY better than stock ones. Cheers!

@sootyfoot 27 күн бұрын

THanks for the info. And where do I find tone net

@daves_not_here_mannn Ай бұрын

Does it connect to a regular usb port on a computer? Mine doesn't have usb c

@galtonestudio Ай бұрын

I don't have usb c port as well in my pc: ) You need a good quality usbC-usb cable, basically a Basic charger cable. Cheap ones (at least in my case) don't work, but most of good quality ones work ok :)

@daves_not_here_mannn Ай бұрын

@galtonestudio wow thanks for that quick response! My tonex one was just delivered but im at work waiting for 5 and thought about that usbc port lol

@galtonestudio Ай бұрын

@@daves_not_here_mannn No problem! Cheers!

@colbyclark8069 27 күн бұрын

Hey. I followed your video. I still can’t connect the pedal to the library

@galtonestudio 27 күн бұрын

Have you tried different USB cable? In my case only 3 out of 10 of my phone cables worked.

@colbyclark8069 27 күн бұрын

@@galtonestudio just tried a new one and it worked. Thanks

@thisisme4858 23 күн бұрын

any videos on how to use with IPad. It’s confusing and I don’t know how to download presets on to tones one?

@galtonestudio 23 күн бұрын

Hello! Basically if you're using it on ipad, the only way is to use a ToneX app here (not the pedal). I made a video about that a while ago. A couple of things: - You need an audio interface that works with ipad --> irig or something similar. - You can't import TXP files into iPad. Only use tonenet tones or ik multimedia partner collections. kzfaq.info/get/bejne/odR2f8uotNmXl6s.html

@thisisme4858 23 күн бұрын

@@galtonestudio that’s incredibly annoying. Iv literally just purchased a tonexone so that i can download my presets on to it. So basically i need a mac/pc to use my tonex one pedal?

@thisisme4858 23 күн бұрын

Also i thought i could download 20 amps or stomp models from there catalog but the app is only letting me select a small portion of there amps?

@galtonestudio 23 күн бұрын

@@thisisme4858 Yeah unluckily IK sucks at user experience. It's worth it though, I ditched my kemper for tonex, but it has a steep learning curve. Yes - you need to use PC. You can also watch that video. To be honest it's the best workaround for not - use app to create tones that you like, edit them and then transfer them to tonex one. kzfaq.info/get/bejne/Z9yhgtacsMq2XYk.html

@galtonestudio 23 күн бұрын

@@thisisme4858 Make sure to register LE version. You're probably still on version CS.

@mikecashmusic Ай бұрын

My Tonex One software does not recognize the pedal.

@galtonestudio Ай бұрын

Have you tried different usb cable? I was unable to use a provided usbC-usbC and out of 5 usbc-usb cables 2 worked properly. Try changing it.

@mikecashmusic Ай бұрын

It worked! Thanks

@LIKEFUNK Ай бұрын

Those little contraptions are subject to providing only the tones supplied into it via its library samples (captures) of the guitars used at the time of capture, it's not going to replicate for the buyer to suit if a different guitar is being used replay such...end or report!

@galtonestudio Ай бұрын

I am not sure if i understand correctly, but profiling process uses a DI file provided by IK with multiple guitars played in multiple styles. So that comment makes no sense, guitar has nothing to do with a profiling. Anyway in my experience, unless you are using a different pickup type, differences between guitars are marginal.

@benspeeds Ай бұрын

Oh yeah...The only option for the TONEX ASIO drivers are for windows so i can't even get into the librarian. I'm using a mac mini. This truly sucks! Sent an email to support and got no response.

@benspeeds Ай бұрын

Found out that the ASIO drivers are only for windows. There is no additional step needed for Mac OS. I finally got things to start working today. Initially, I was just overwhelmed by the complexity of the world of IK. Hopefully, it all ends up being worth the time and effort in the long run.

@duniajole Ай бұрын

From my experience with tonex pedal, you need tonex max to access the librarian

@DBIIIStudios 7 күн бұрын

how the hell do you bypass this pedal

@galtonestudio 7 күн бұрын

@@DBIIIStudios 7:00

@leventopoulos 14 күн бұрын

That must be the worst software i 've ever seen in 38 years of working with computers.

@galtonestudio 14 күн бұрын

@@leventopoulos i totally get it :) Once you get used to it it is actually very easy and quite logical (compared to older versions), but starting is insanely infuriating for many people.

@leventopoulos 14 күн бұрын

@@galtonestudio It's strange that the hardware and the sound part of the software are so great, and the GUI is so unpractical! Your video helped a lot by the way!

@galtonestudio 14 күн бұрын

@@leventopoulos well i have no idea why they made it so tough, especially being a SOFTWARE company lol. But it is worth the hassle. Thanks!

@steveinman1512 14 күн бұрын

For me, it is the worst collection of terribly documented software that I have seen in 43 years of working with computers in an engineering field. Truly abysmal, IK. If not for THIS TUTORIAL VIDEO, I would be returning your product to Sweetwater.

@RattlersMusicAdelaide 13 күн бұрын

I’ve been a software developer for 20 years and I was stunned when I realised how this works. The experience is totally ass backwards. I have the Helix, the Bias FX and eventide H9 software (Bluetooth iOS app) and they all are way ahead of Tonex user experience. It also feels like bloatware to use (same as Bias FX) very slow to start, c’mon guys..