This new Diablo blade is so good you will BEG THEM to take your money!

Рет қаралды 541,425

2 жыл бұрын

It's no secrete that Diablo is my favorite blade manufacturer, but I didn't even know they Diablo Tools came out with this new 3" cut off tool blade until I seen it at the Home Depot. This new Diablo 3" cut off tool tile blade blade is so good that you will beg Diablo them to take your money
Buy Here
Diablo 3 in. Diamond Continuous Rim
Cut-Off Discs for Masonry
www.diablotools.com/products/...
Tool Review Zone Merch Store
Become a Toole Review Zone Channel Member for exclusive perks here / @toolreviewzone

Пікірлер: 675

@themeat5053 2 жыл бұрын

You were so cool walking through the Depot, that the other patrons seemed to be frozen in place. Nass...

@ToolReviewZone 2 жыл бұрын

Hahahaha, this comment is getting pinned 😆

@paedahe4975 2 жыл бұрын

I gotta get me my D-A-blow blade. Score.

@themeat5053 2 жыл бұрын

@@ToolReviewZone thanks

@davidstraussjr1553 2 жыл бұрын

@@themeat5053 :

@streetplatoon562 2 жыл бұрын

🤣🤣🤣

@jrod5113 2 жыл бұрын

It's funny how many guys use the city trash lid as a work surface. Mine has spray paint on the lid has well. The best work table is a free one.

@ToolReviewZone 2 жыл бұрын

Hahahaha, so true

@FunAtDisney 2 жыл бұрын

@@ToolReviewZone Same for me! Hey, I don’t own them so if they get nicked….oh well!

@thedude8976 2 жыл бұрын

Lol I was thinking the same thing, perfect height too

@fauxque5057 2 жыл бұрын

Nothing better than a trash dumpster recycle bin work table. Mine have saw cuts, drill holes, overspray all over them

@alanhutchings6713 2 жыл бұрын

@@thedude8976 been using two in the uk for years with a board with blocks on the back that drop in the bins to stop it moving ideal to save you're back

@kenball8526 2 жыл бұрын

I’m glad to see another guy use the wheely bin for a work bench.

@ToolReviewZone 2 жыл бұрын

Hahaha, damn right Ken 🤣🤣👊

@fixedit8689 2 жыл бұрын

Due to the clutter on the work bench so the trash bin becomes handy. Uh, I’m guilty of that too

@jimivey6462 2 жыл бұрын

By watching your videos, I learned how to walk real cool like through the store so that the ladies say, “Oh, he’s real nass like!” Thanks!

@ToolReviewZone 2 жыл бұрын

Hahahaha, be prepared to get swamped by the ladies Jim 🤣🤣👊

@stevegarcia1796 2 жыл бұрын

👍👀👌

@jimivey6462 2 жыл бұрын

@@stevegarcia1796 Steve, I bet you’ve put some swagger in your step as well. 🕺

@billysyms5761 2 жыл бұрын

I've been using these blades in the 4" version for many years. Just saw this 3" in Home Depot yesterday. Awsome!

@brois841 2 жыл бұрын

First of all, love the satire and editing. Takes a lot more work than people realize. Second, didn't even know a tool like this existed. I need to do some intricate cuts in my tile floor and could use one. I have all DeWalt tools, hope I can get the cutoff tool soon too. Thanks for mentioning it, looks like it was just announced.

@ToolReviewZone 2 жыл бұрын

Truly appreciate the comment BROis 👊

@rob-toolsandtech2521 2 жыл бұрын

Adding the ability to use the side to clean cuts up seems like a cool feature.

@taylorjams4845 2 жыл бұрын

Literally Every brand of diamond edge masonry blade has that “cool feature”. That being said, nothing compares to Diablos quality and longevity.

@peesmkr 2 жыл бұрын

I've been using the reciprocating saw blade where I have to cut 1/2 inch steel rod and am still using it. Cuts like butter !

@davidparker2173 2 жыл бұрын

Great New Information. The 3 inch angle grinders seem a little pricey now. The 3 inch would have an advantage with the smaller pieces, and curved cuts, but I think my 4.5 inch could do what I need it to. I see that Diablo makes a continuous rim 10 inch blade that will also dry cut and would automatically give me straight cuts on my miter, but my 4.5 inch could probably do the whole thing just fine. Just score them, and follow the line.

@billybobjones4317 2 жыл бұрын

I bought the Diablo 4 inch blade for my Angle Grinder, made a huge difference to doing tiling, I can do nice straight as well as smooth edges, it's amazing how a single tool can make such a difference. I didn't even know there was a 3 inch version as I only see 4 inch blades or larger at my Hardware store except of course for the Dremel blades, but they are tiny :)

@eoghanfla6343 2 жыл бұрын

I’m with you on this one Clint, that’s also one of favourite tools in the stash. Don’t use it every day but when I do it’s a life saver. It’s just occurred to me though if you guys struggle to get new blades there is not hope I will over here.

@GrievenceCapitolist 2 жыл бұрын

Diablo have been my favorite blades since the "piranha" blades where discontinued or bought out my someone . The brand never disappoints me .

@billsomerset238 10 ай бұрын

I like that you spotted it across the bulb isle then picked it up in front of the paint dept. I have to commend you on how straight that cut was. Kudos

@JT-il3fe 2 жыл бұрын

While it may not require to be cut with water I would suggest you do use water for the cuts. Water creates two hydroxyl groups attached to silicon. As a result, the length of the crack grows by the size of the bond rupture. The water reaction reduces the energy necessary to break the silicon-oxygen bonds, thus the crack grows faster and breaks cleaner. However the experienced tradesmen can get a quite nice break (cut) without water.

@boots7859 2 жыл бұрын

Please provide a cite for this. I wasn't aware a tile saw was primarily chemistry in action vs simple mechanical abrasion.

@melgross Жыл бұрын

Umm, are these saws rated for use with water? I doubt it. I have tile saws specifically meant for wet or dry use. The bearings and other parts are sealed for the purpose. The last thing you want is an abrasive slurry being pulled into the cooling vents or on the bearings.

@lanejesse1453 2 жыл бұрын

I've heard cutting through a brick a few times I believe you need to use some water too. the brick dust and water. it makes a slurry that will help to sharpen the blade. By removing some of the metal and exposing more diamonds.

@IFIXCASTLES 2 жыл бұрын

YES!

@johnlittle5854 2 жыл бұрын

I always go for diablo blades in everything. They cost a little more upfront but save a lot of money in the long run. Nice little saw.

@paulshelley3770 Жыл бұрын

One thing I love about that M12 cut off is that it actually comes with a shroud and a vacuum Port. I wish the Ryobi one had that attachment I wouldn't even care if it at the vacuum Port just having that shroud guide like a mini saw should come with every single one of those three-inch cut off tools

@rkfarmranch8214 2 жыл бұрын

I don’t know how long this Milwaukee 3” grinder has been available but I’ve waited forever for it. I wonder if Makita has a mini grinder? My Makita grinders are my favorite tools in the world….I use a lot on concrete, I make a lot of stuff out of Arizona flagstone, etc and to have a smaller tool with a smaller blade and Diablo blades are awesome, you made my day Mr. Pittsburgh. My birthday is next week and my wife has just received this video to encourage her to buy me all this stuff.

@procrastinator1842 2 жыл бұрын

Great find. For cutting steel I found that Kango makes a 3" diamond rim metal cutting blade. Last ages and doesn't have the shrinking problem. A lot of the time I'm cutting out 16mm furring channel so with the stock abrasive discs you can only cut a few before the disc has worn away too much.

@debrachance4244 Жыл бұрын

First of all, I love your channel. Your presentations, and reviews of the products are yes.....like no other that I have ever seen. I am the DIY/Ryobi Queen, and have taken on new challenges, and projects, and am still learning. I own at least 30 Ryobi tools, and am looking for my next Ryobi dream tool. I have had the Ryobi Cutoff tool for quite some time. A few months ago, I purchased the diablo multipurpose cutoff wheels. I am remodeling our kitchen, and will be cutting porcelain tile. Upon watching your review on the Diablo 3 inch Diamond continuous rim cutoff disc, I called searching my local Home Depot stores for this product. There are 5 Home Depot in my area, only two of the locations carried the item. The location that I went had five....I bought three. I can't wait to try it. Thank you for sharing your knowledge!! Debbie

@akaredcrossbow 2 жыл бұрын

I bought the Milwaukee cut off tool and a masonry blade to do some brick repointing grinding work and the cut off tool failed miserably. Not enough power to handle soft mortar. The tool heated up to fast and kept on cutting out and overheating, plus the tool goes through batteries quickly. Had to use the good old trusty angle grinder to do the job. However I am going to keep the cut off tool to cut smoke pipe and sheet metal, because it shines doing that job. 👊🏻👍🏻👍🏻

@PeterYurkins 2 жыл бұрын

i was in a jam today so i picked up the 3in m12 milwaukee mini cut off tool, i didnt even bother with the blades that it came with, i picked up this Diablo blade for tile it did job just great!! better than i expected! ty for the suggestion!!

@utid1957 2 жыл бұрын

Awesome review. Thanks!

@markmatuszewski3713 2 жыл бұрын

The tool can switch directions, but those diamond blades are all directional. If you look at them they have arrows printed on them showing which way they're supposed to go. Could be your other blade failed from being run the wrong way and knocking off all the diamonds...

@ghiagoo 2 жыл бұрын

Sweet. Exactly what I need. I have a small bit of tile i need to cut.

@tonzellia 2 жыл бұрын

That’s real nice like Clint. Thanks brother for letting us know, I just got the cut off saw.

@ToolReviewZone 2 жыл бұрын

How do you likenit Rob?

@tonzellia 2 жыл бұрын

@@ToolReviewZone love it

@rawknee04 Жыл бұрын

Awesome video! I’ll definitely pick up one of these for my new cutoff tool. Cheers!

@gehringer37 Жыл бұрын

I just found this channel...I love it so much!!!

@ToolReviewZone Жыл бұрын

Awesomeness!!!!

@Extort713 Жыл бұрын

A channel you can trust, brother has a dip in the whole video.

@train3827 2 жыл бұрын

Nice thanks for sharing. BTY you have the same work bench I use outside.

@geneticdisorder1900 2 жыл бұрын

I’ve been buying Diablo hole saws, to replace the old ones I’ve had for 20 plus years. They are pretty good, except for the quick change chuck, which is a cheap POS. I’ve gone thru like 6 chucks in two years because they fall apart or the center point bit won’t stay locked in. I’ve also killed 6 Milwaukee hackzalls in two years, but Mill has given me back a brand new one every time. So thanks for that Mill !! Would still like to slap the engineer who designed the hackzall planetary gear shaft for it.

@dlowe2785 2 жыл бұрын

Genuinely my favourite Milwaukee tool and it just keeps on giving! Only ever used for cutting old stainless pipe or Boiler Flues but after this, some tiles are gonna get it. I’ll keep an eye out for ‘Diablo’ in the UK but I’m pretty sure its just Freud. Reeeeel nice vid pal

@ToolReviewZone 2 жыл бұрын

I believe they have the 3" as well. Would be just as good 👍

@robertrada4783 2 жыл бұрын

Unless Freud has a plant in Indonesia….. 😂. The Bosch-Diablo stuff is all over the map, especially now with the rebranding expansion. They’ve brought in Scintilla, SIA some US partners and, of,course, a lot of Chinese stuff (owned by Bosch or a manufacturing partner? I don’t know). The biggest selling Diablo saw blades actually say Made in USA on them now. Freud USA in house? Licensed partner? I don’t know. The 3” stuff I’ve seen is from all over the world: Indonesia, China and a “cuts everything” blade from Switzerland. Region locking and marketing are weird. I’ve got six or eight bosch blue italian (freud) saw blades from the UK market and some of them have the same exact designs as the Diablo, but the blue blades are closer to the branded Freud “industrial” (not putting them down, but they ain’t industrial blades) in carbide and plate thickness.

@patrickscahillii9365 2 жыл бұрын

Great presentation, great sense of humor, don't change a thing.

@robertlee4172 2 жыл бұрын

Freaking nice! Diablo makes the best bits, blades and cutters in the industry. Dollar for dollar you'll get your money's worth buying Diablo products. By avoiding any guess work, you'll save on frustration too.

@gusc6785 2 жыл бұрын

Bosch

@robertlee4172 2 жыл бұрын

@@gusc6785 No, I got wacks of Bosch bits and blades. They work quite well for what I do. Not knocking Bosch. Just saying the technology behind Diablo products is "cutting edge".

@markcraig3702 2 жыл бұрын

You got me sold, I am going to try and grab one today.

@jbstepchild 2 жыл бұрын

Most diamond edged blades are really recent along as u keep em cool simple cutting like this is perfect so it should last a long time an it's very versatile cut just bout anything

@kattfranklin6933 2 жыл бұрын

Thank you 😊

@beeftec5862 2 жыл бұрын

Do the tiles get any fine chipping on the edges, or very clean cuts?

@stevetipton7151 2 жыл бұрын

thanks for the info...gonna give them a try on my own backsplash...real nice like

@carlmetzger3971 2 жыл бұрын

I love this guy! And.....He has the most fantastic videos. Very informative.

@ToolReviewZone 2 жыл бұрын

Thank you so much Carl!!!!!!!

@AllTattedUp13 2 жыл бұрын

FINALLY!!!!! A yt video of somebody actually using that milwaukee cut off how it's intended lol...a lil at a time, not going all balls out from start. And then complaining that the tool it self has no balls cause it went into protection mode lol.. Hats off to u brother for keeping the balls where they need to be. 👏👏👏🤳

@ToolReviewZone 2 жыл бұрын

Hahaha, next video I should try to cut down a maple 🌳 🤣 thanks for the comment Brennen!!!

@johnjingleheimersmith9259 28 күн бұрын

The milkwaukee cutoff is kinda the worst of the ones out there, in power and value. Seriously the ryobi version is even 50 bucks cheaper and still cuts harder than the red boy. Harbor frieghts model is only a little worse and but like... it's only $50 so, for the money... yikes.

@mhack9881 2 жыл бұрын

Thanks Clint.

@CowsGoM3ow 2 жыл бұрын

Great use of the kids play-kitchen as a bench when cutting those kitchen backsplashes lol. *very nass*

@ToolReviewZone 2 жыл бұрын

Hahahahahahahaha 🤣👊👊👊👊👊👊👊

@popeyeandy959 2 жыл бұрын

That sounded so cool I went out and spent my money and bought some of those blades, and I don't even have a 3" cutoff saw...

@debrachance4244 Жыл бұрын

OMGoodness, no 3" inch cutoff wheel? That it too funny. I guess you'll have to invest in one! Have a great day!

@ivtec845 2 жыл бұрын

I just saw these online have wanted them to make Dimond blades for years,!!

@ryobiguydiy 2 жыл бұрын

Man, I really need buy one for my Ryobi cut off tool! Great review, brother!👊🏾

@ToolReviewZone 2 жыл бұрын

Will be awesome 👌

@frederickshipp8013 2 жыл бұрын

I bought 3 DIABLO DEMO blades to cut up the the roof of a 30x40 building which had multiple layers of roofing on it into pieces I could handle easily. It only took one to get the job done. I also used it to cross cut most of the lumber to fit in my wood stove. BUT after I used it to open the ridge on my house wider for the vent, two cuts 59' two layers of architectural shingles,well I'm afraid that done it in.I'm on blade two now. I DEFINITELY RECOMMEND DIABLO BLADES!!! I was very impressed with how it held up to what I put it through.

@mikemcnamara4326 2 жыл бұрын

Clint, thanks for dressing up for your videos. Clean tank tops are a plus.

@ToolReviewZone 2 жыл бұрын

🤣👊

@kbbb4227 2 жыл бұрын

Thank You.

@williamlabryer8386 2 жыл бұрын

Saw that blade the other day at the Depot. They had that one and a wood blade also.

@ToolReviewZone 2 жыл бұрын

I may need to try the wood one 👊

@siamaklighvani3951 11 ай бұрын

the important thing is that the Milwaukee and diablo blade is speak for itself. Thanks for showing .

@crazymayne69 2 жыл бұрын

This is just what I been looking for! Metal blades I can find in abundance, but always had a problem getting the tile blades. Do you know of any good places to get plastic/vinyl/vct cutting blades for these saws?

@debrachance4244 Жыл бұрын

I'm thinking that maybe you would use the all purpose metal/blades.

@mrkrause3 2 жыл бұрын

Thanks for sharing

@Julian-do7bv 2 жыл бұрын

I love their metal grinding cut off wheels they will cut through anything and last forever so maybe I need to do some tile work now ;) lol

@markgonzalez8828 2 жыл бұрын

I want to know how it does on a 1/4 inch marble tile. Right now I’m doing 45s edges and it doesn’t fit on the regular wetsaw (dewalt) . And the Milwaukee grinder might be a bit uncomfortable after a period of time. This would come in handy.

@jamesjorquez6774 2 жыл бұрын

I tiled a bath and laundry using a a 4" diamond blade mounted on an angle grinder. It is sort of eire that you can scribe and cut a straight line without a guide. Cutting a hole for the closet flange was stupid easy! I had borrowed a tub saw; for the job; cut one or two tiles with it and handed it back.

@PawOfRizzo 2 жыл бұрын

Nice. Your video makes me want to randomly pick some part of the house to tile, just to use this blade.

@ToolReviewZone 2 жыл бұрын

Hahaha, I think I'm going to do my fireplace just because of the same reason 🤣

@BrianWingard 2 жыл бұрын

I am really glad you showed this. This will be perfect for me for tile cuts around radiuses and such. I looked on the diablo site and can not find them yet but hope they will be available soon. I have a larger cut off from diablo I just did a video on to cut pavers and love it!

@ToolReviewZone 2 жыл бұрын

Check the link in the description 👊

@BrianWingard 2 жыл бұрын

@@ToolReviewZone I did hit the link but no sellers online and nothing available local to me either. My area always takes longer for some reason to get the newer items. Pittsburgh area just like where you said you were from originally. I like that Milwaukee cut off too! I just started using some of their products also and really like them.

@ToolReviewZone 2 жыл бұрын

I just heard that these are not really rolled out yet. I'll post as soon as I find them on line

@BrianWingard 2 жыл бұрын

@@ToolReviewZone Thanks for the fast response! . Will certainly come in handy.

@ericdiesel33 4 ай бұрын

Can this cut thru glass mosaic tile?

@tinman1955 Жыл бұрын

Is a cut-off tool same as a mini angle grinder? Are they used for grinding on the flat surface of the disk?

@Martin1519 2 жыл бұрын

Have you tried using it to sharpen the carbide teeth on a saw blade? Just curious if it would work.

@jackdolphy8965 2 жыл бұрын

I’ve had success making circles in porcelain tile with 4,1/2” blades with a regular size angle grinder. This 3 incher looks like it’s a serious upgrade to my technique.

@cerberus2881 2 жыл бұрын

You free-handed that radius "real niiice like."

@chrisfyfe9212 2 жыл бұрын

I , for sure want to try one !

@sweat319 2 жыл бұрын

Your the best 👌 👍 thanks for your information 👍 and video 👍 📹 I appreciate you 👍

@SurviveTheDay Ай бұрын

Damn.. No garbage can lids were harmed in making this video.

@shaffer4220 2 жыл бұрын

Now that’s a great tool! Excellent video as always! Btw, kitchen looks fantastic, what’s the name/style of your countertop?

@ToolReviewZone 2 жыл бұрын

Thanks Windmill!!!!!

@FassEddie Жыл бұрын

That’s amazing! I am amazed! That’s the first time today! I’m expecting this is the only time to day for amazement, so thanks, Clint! Yinz did good!

@danielconaway2055 2 жыл бұрын

LOVE this -- will totally work on my RIDGID version of your Milwaukee saw

@ToolReviewZone 2 жыл бұрын

Sure will!

@debrachance4244 Жыл бұрын

I loved your chill walk through Home Depot!

@TonyFontanesi 2 жыл бұрын

This video was suggested in my feed. From on Pittsburgh guy to another - you just got a new subscriber haha. Gotta support folks from da' Burgh.

@ToolReviewZone 2 жыл бұрын

Haha welcome to the channel Tony, and GO STILLERS!!!!

@Michael_78 2 жыл бұрын

I love this cutoff tool too! I actually just used it with the plastic cutting wheel that it comes with to install 600 ft of lvp. Worked awesome! The only thing I don’t like about this tool is I have a hell of a time getting the batteries off of it.

@kevinm.6855 2 жыл бұрын

May I ask why you didn't just score and snap?

@ToolReviewZone 2 жыл бұрын

Yeah bro, mine gets snagged too sometimes 👊

@Michael_78 2 жыл бұрын

@@kevinm.6855 For my end cuts I use my Crain wood cutter. If you don’t know what it is it’s basically a blade that presses down on the material with such force it snaps it. It’s an amazing tool if you do a lot of floors which I do for a living. But for length rips you can’t always score and snap those. It worked for those really small rips that you can’t quite score and snap and it also works really good for cutting around walls and other things. Using a jigsaw also works for those things but LVP really destroys those jigsaw blades. So really the only reasons I used it was to see how well it would work for this application and because I was installing on a second story today and didn’t feel like lugging up my tablesaw to the second floor lol.

@imnotanalien2948 2 жыл бұрын

All the m12 tools are hard to get the batteries out when they are new. I have taken a pair of pliers to mine a few times.

@thedude8976 2 жыл бұрын

@@imnotanalien2948 Yeah like the bit case's you need pliers to get the bits out. Great case's but a little extreme on the holding power

@YukonDemon 2 жыл бұрын

I wish I had one of these when I tiled my bathroom floor and tub surround.

@rye1315 2 жыл бұрын

Little late to this but great video my question is how long does the batteries last using it for tile?

@E.L.RipleyAtNostromo 2 жыл бұрын

Great tip, thanks! Home Depot online only seems to have the 4” and larger sizes, so I’ll go by the store but it looks like I’ll have to buy somewhere else. Right now I only have an air cut-off tool, but have your Milwaukee M12 on my wish list.

@ToolReviewZone 2 жыл бұрын

They still aren't on line for some reason? My store had a hole bunch on the shelves though 🤔

@E.L.RipleyAtNostromo 2 жыл бұрын

@@ToolReviewZone Good deal, and MSC and some other places also show them available.

@marktibbetts3799 2 жыл бұрын

DANG,I am impressed...you convinced me. Yes Sir I am buyin one of those 12 inch floor tiles

@trojunhorse76 2 жыл бұрын

This video made be buy a tool I didn't know I needed.......I use this cutoff tool to open my Amazon Packages!

@ToolReviewZone 2 жыл бұрын

Hahahaha 👊 🤣

@jimmysthegreek 2 жыл бұрын

I got one since they came out and I have done so far 3 bathrooms 6 backsplash kitchen and still keep going 👌🏻

@ToolReviewZone 2 жыл бұрын

They are awesome. Thanks for the feedback jimmy!

@timelwood2555 2 жыл бұрын

Would that tool and blade work on coping crown ?

@timrocheleau858 2 жыл бұрын

I can't find them online.... I even went to the link you posted, and it doesn't show where to buy them online, only in person...

@dondiego124 2 жыл бұрын

Cool rotozip carries something like that for their 90° cut off wheel attachment that used to come in the older kits mine lasted probably 12 years. IDK if they still sell them maybe you can do a comparison

@curlymaple42 2 жыл бұрын

Dangit!!! Another M12 tool and blade I NEED to get!!! I usually just throw my Makita corded 4" angle grinder in, but well, battery? Uh YASSSS!!!

@tk-zb6br 2 жыл бұрын

I was sold on Diablo blades the first time I put one in my 50 year old model 77.

@glorygloryhallelujah 2 жыл бұрын

My work bench is literally a garbage pail. And it works great

@ToolReviewZone 2 жыл бұрын

🤣👊

@kdautoks 4 ай бұрын

You are absolutely hilarious!!! Great product review, I bought one!!!! Diablo is in everything I own!!!!

@ToolReviewZone 4 ай бұрын

Thanks brother, I appreciate the comment 👊

@dumdiversaspapalbull1452 Жыл бұрын

I bet that cutoff tool would be great on some vinyl flooring. That’s what I’m gonna use it for. She’s been wanting me to put some in the basement and her parents’ house. Heck yeah.

@kirkyorg7654 2 жыл бұрын

back when Makita had the 9 volt they had a 3" cut off saw that was great for tile they had a corded model as well as the cordless one and they had a water bottle attachment for it was the cats ass for tiles the continues rim ones are worth the money

@ypaulbrown 2 жыл бұрын

subscriber here from Florida, cheers, Paul

@wm973 2 жыл бұрын

Well... I can't start to tell you how much I hate tool reviews. Some of them think we have as much money as they do or sponsored like they are or daddy helps ya. But I was just thinking of a new blade a couple days ago and this popped up. Glad I did cause first you made me smile... then giggle... then the big laugh. Thank you. Made my day and I learned something to. By the way... you cut straighter than most carpenters I have seen with a straight edge! New sub and looking forward to see more vids. Thanks!!

@ToolReviewZone 2 жыл бұрын

Haha, awesome. Welcome to the channel and truly appreciate the comment W M!

@MovieMakingMan Жыл бұрын

I don’t come to this site for information or new gadgets. I come here for the comedy. It’s especially good when he starts weeping uncontrollable. He’s one of the best dramatic actors anywhere. Ok, maybe I do visit his site for info 😂.

@michaelcummings6178 2 жыл бұрын

Internet is where you find the best reviews - thats where I look !

@justinhc123 2 жыл бұрын

Put that dust shroud and a vac on the saw for a 90% dust-free cut indoors. Also, I feel the cut off tool is underpowered with the 2ah batteries but packs a better punch with the 6ah

@bradjohnson9671 2 жыл бұрын

BTW, it's pronounced Dee-Ah-Blow , Spanish for Devil. Diablo is pretty much all I use anymore for general cutting. There construction blades are top notch. Obviously not meant for fine finish work but sure do rip though anything for general use.

@drkline69 2 жыл бұрын

His pronunciation throughout the video was driving me nuts!

@silvergrizzly316 2 жыл бұрын

It's humor, my man! 😄

@bredenis5 2 жыл бұрын

Did you ever think that maybe he is mispronouncing it for comedic effect? Don’t be a jagoff.

@ToolReviewZone 2 жыл бұрын

🤣👊👊👊

@gusc6785 2 жыл бұрын

Bosch owned

@blueovalfan23 2 жыл бұрын

no tile work needed here but they make some wicked reciprocating saw blades for metal. think i have a diablo blade on my skill saw as well and it's pretty decent for screwing around in the back yard.

@electricalron 2 жыл бұрын

I'm a subscriber because I'm entertained each and every time I see a new video! Diablo 3" cutoff wheels are great!!! Also, as an electrician, when the tile installer screws me and doesn't cutout my receptacle/ switch box to size for a decora style switch/ GFCI receptacle devices, the 3" Milwaukee cutoff tool saves the day. Do it right the first time and get paid immediately! switch boxes along a countertop or bathroom,

@procrastinator1842 2 жыл бұрын

Yep, mine is used for when the tiler fucks me or the plasterers put their furring channel where my lights are meant to go. Wouldn't need it if people could do their job 😂

@ToolReviewZone 2 жыл бұрын

Thanks brother 👊👊

@jdreynolds29 2 жыл бұрын

Thanks Clint I'm going to try one

@ToolReviewZone 2 жыл бұрын

Let me know how you like it Jason!!!!

@Prevailingbucket 2 жыл бұрын

I looked, nothing available Home Depot or online. Except 1 on eBay. Sorry that one is gone :-) Thanks for the tip. Looking forward to its arrival.

@lonedesertfox 2 жыл бұрын

Great job Clint

@Lifeinthewoods99 2 жыл бұрын

Clint, your from Pittsburgh. I'll watch you alot more often now.

@ToolReviewZone 2 жыл бұрын

Hahahaha 👊 👊 👊

@vincentcloutieryes 2 жыл бұрын

It will be a nice addition to my little ridgid, I don't know if the fact it's on the 18v mean a bit more power than the milwaukee for sure its less compact