00:00 Overview 00:34 Building 01:34 Cleaning up office 01:47 Join boards 02:08 Level 03:40 Stain and finish 06:41 Cable Management 11:00 Casters (Mac Pro) Wall-mounted laptop dock video kzfaq.info/get/bejne/qt2pZtZ13ruydJ8.html Tools in this video: LED Light: amzn.to/3oC0a1Q Anker Type-C Hubs amzn.to/30AOB2T and amzn.to/3FpoPxE 6-port charger with Type-c amzn.to/2YPBVV0 Fiio DAC amzn.to/3ovTFhb Stud Finder amzn.to/3cjpgNm DeWALT drill amzn.to/3CLC6zN DeWALT Impact Driver amzn.to/3CJ4pPu DeWALT Flashlight amzn.to/3CH1czZ DeWALT Oscillating tool amzn.to/3iIKurK DeWALT Sander amzn.to/37FsEzU DeWALT Circular Saw amzn.to/3F8Bftv
@simpawz20763 жыл бұрын
My guy really got extra pc cases to roll around on tf😂😂
@ToolsElectroDIY3 жыл бұрын
Mac, not PC :D
@xiledturtle7663 жыл бұрын
Them are Mac's.. and you find the case on Ebay.. and smack some rolling wheels on them
@eml99223 жыл бұрын
@@ToolsElectroDIY Still a personal computer
@ToolsElectroDIY3 жыл бұрын
@@eml9922 Yes!
@eevd350z3 жыл бұрын
Just missing the Mac trash can 😂
@stephaniebentley32122 жыл бұрын
Thank you!! I have been trying to figure out the most secure way to mount my floating crafting desk organizer - the brackets you used were perfect & easier than cutting a bunch of 2x4's down to create braces. I may even go a step further & hinge the desk part to save space!
@ToolsElectroDIY2 жыл бұрын
Glad I could help! Sounds like a plan! I look forward to seeing your project!
@MrAlexmorrissey3 ай бұрын
What are these brackets called?
@emmaberry1292 жыл бұрын
So helpful!!!! Thanks!! Love the coffee stain tip! I hate using toxic chemicals in my house
@ToolsElectroDIY2 жыл бұрын
I'm glad you find this video useful!
@scottpollock65492 жыл бұрын
Thank you for giving so much support about the chair! I will look into buying it! Here's an appreciative tip for being a great guy and content creator! Your consistency will pay off. Keep up the amazing videos and Amazon streams!
@ToolsElectroDIY2 жыл бұрын
Wow thanks a lot Scott! That's the largest tip I've ever received on KZfaq!!!
@scottpollock65492 жыл бұрын
@@ToolsElectroDIY You're welcome, you deserve it! Also, for some reason you're live stream ended in the middle of your sentence for me and there was no more chat or anything. Anyways, I'm just glad you saw this, have a great rest of your day!
@GottiRC3 жыл бұрын
man, this video really helped me to sleep, better asmr!!
@ToolsElectroDIY3 жыл бұрын
Glad I could help!
@raylawlor48872 жыл бұрын
"I built a floating desk for less than $50...!" Proceeds to use $1500 of equipment for the job...
@ToolsElectroDIY2 жыл бұрын
LOL at a bare minimal, you can do it with a drill and a circular saw.
@chilufyamatanda3 жыл бұрын
The b roll (rolling the cases) is hilarious 🤣🤣
@ToolsElectroDIY3 жыл бұрын
haha!
@theycalledherschool Жыл бұрын
Thanks so much for sharing this video. I'm planning to build a floating bar and I'm looking at as many possible ways to do it as possible.
@ToolsElectroDIY Жыл бұрын
Glad it was helpful!
@ChrisKadaver3 жыл бұрын
Really weird mood to this video. XD Would wanna see how the ambient light from the led strip looked with the lights turned off though. :o
@ToolsElectroDIY3 жыл бұрын
Haha! I have the exact video for you regarding this floating table with LED lights kzfaq.info/get/bejne/oJ1gd9Zzpreaf6M.html
@ChrisKadaver3 жыл бұрын
@@ToolsElectroDIY Thanks! That really looks fantastic!
@redman27513 жыл бұрын
Nice setup. I just got done building my desk about the same way, though I didnt make the desk itself, I bought a butcher block counter top from lowes that is 10feet long, which is a few inches short of my room but I wanted a gap all the way around. I'm not done with my setup yet. Still working on the details.
@ToolsElectroDIY3 жыл бұрын
Sounds great! Looking forward to see your setup if you can share on KZfaq.
@redman27513 жыл бұрын
@@ToolsElectroDIY I may do that. Not sure. I’m not much of a KZfaq creator or anything. Maybe when it’s finished I’ll upload a short video so that others can get ideas similar to what I have done. If I do I’ll be sure to come back here and let you know.
@ToolsElectroDIY3 жыл бұрын
@@redman2751 Cool, thanks for sharing!
@zerosandones7013 жыл бұрын
How are you mounting the countertop if you don't have support on the sides? Angle brackets?
@ToolsElectroDIY3 жыл бұрын
@@zerosandones701 there are supports on both sides
@mpxz999 Жыл бұрын
Next time you need to make a cut with the multitool for an opening, I suggest applying painters tape on the surface to reduce the roughness of the edges made
@ToolsElectroDIY Жыл бұрын
Good idea, thanks!
@tequilalane6033 Жыл бұрын
I would love for my home to have these same tops, but used as floating countertops and an floating islands just like this.
@ToolsElectroDIY Жыл бұрын
You can do it! Smash the like and subscribe!
@oscargaribay14798 ай бұрын
Where did he get those brackets to support the desk on to wall???
@ToolsElectroDIY8 ай бұрын
Old bed frame parts. I think you can find similar ones from Home Depot.
@evanseu44523 жыл бұрын
100% going to bow in the middle over time If not sart moving with expansion and contraction and only such small brackets maybe a 4x2 timber from side to side underneath where the LED's where to strengthen the desk top over time I have built one my self at home but my desk has 4x2 timber under fixed to the wall
@ToolsElectroDIY3 жыл бұрын
There are metal brackets on each stud along the length of the desk, so far so good!
@user-ig6fj4ue4p3 жыл бұрын
I agree and i don’t trust the weight capacity in such designs
@drew2c6593 жыл бұрын
Hmmm...i think hes just thinking ahead because he knows hes gonna spill his coffee at some point
@ToolsElectroDIY3 жыл бұрын
Yes. And it smells great.
@drew2c6593 жыл бұрын
@@ToolsElectroDIY lol glad to hear it!
@cleangoblin2021Ай бұрын
Cleaning must be a breeze with that setup
@ToolsElectroDIYАй бұрын
Yes!
@jonathanazcoitia6423 жыл бұрын
i thought this video was a trailer for a movie... i just wanted to see a desk .lol
@ToolsElectroDIY3 жыл бұрын
See my latest video for EcoFlow with this desk and led lighting
@mohamedraghine83813 жыл бұрын
tank you very much
@ToolsElectroDIY3 жыл бұрын
You are welcome.
@shaneuniverse4965 Жыл бұрын
Not bad. won't hold up a whole lot, but if you attach all the heavy stuff to the wall (monitors, camera gear, etc), it'll be more than enough.
@ToolsElectroDIY Жыл бұрын
It's still going strong after 2 years.
@jahzy13612 ай бұрын
Plz add some foam to the macbook holder the sound of it dropping is making me go crazy
@ToolsElectroDIY2 ай бұрын
it's fine :)
@JahdielSaneo2 жыл бұрын
SO CLEAN!!!
@ToolsElectroDIY2 жыл бұрын
Appreciate it!
@iLiekLemonade3 жыл бұрын
I wish I had a big workshop and power tools to diy my own ideas..
@ToolsElectroDIY3 жыл бұрын
I hope you get one too!
@MrGroyper6 ай бұрын
Did bro use a 5/8ths to tighten down a Philips head?
@ToolsElectroDIY6 ай бұрын
when? I forgot. See when it's posted?
@gerjaison3 жыл бұрын
Using coffee, that's clever!
@ToolsElectroDIY3 жыл бұрын
I'm glad you find it useful!
@gerjaison3 жыл бұрын
@@ToolsElectroDIY You also mentioned "blue wax paste", i presumed that's car wax for polishing?
@ToolsElectroDIY3 жыл бұрын
@@gerjaison Not car wax. It is Minwax for wood finishing.
@gerjaison3 жыл бұрын
@@ToolsElectroDIY Great, thanks! I'm going to try that.
@ToolsElectroDIY3 жыл бұрын
@@gerjaison Smash that like button :)
@e_souhil3 жыл бұрын
Great desk, planing to make the same!
@ToolsElectroDIY3 жыл бұрын
Go for it!
@javaholic5 Жыл бұрын
Looks Like A Nice Setup 😁
@ToolsElectroDIY Жыл бұрын
Thanks 👍 Smash the like and sub :)
@kw87863 жыл бұрын
Hey Guy you helped out with the Acer 5 Labtop for college. Listen to this guy hes got a heart and wants to help the public. Good dude right here. Thank you again for the help going to check that Labtop out right now. Saved me numerous hours today. -Kyle
@ToolsElectroDIY3 жыл бұрын
Thanks I'm Kyle too!
@shahibaaz3 жыл бұрын
Thanks for that idea man.
@ToolsElectroDIY3 жыл бұрын
No problem 👍
@jenherron73013 жыл бұрын
A PTI Office furniture image commercial ad. Ugh!! Crotchety.
@ToolsElectroDIY3 жыл бұрын
I don't understand your comment. Just in case you didn't notice, this is a DIY build with wood from Home Depot. Not a commercial.
@824Bluetube3 ай бұрын
Would love to do this, but live in apartment.
@ToolsElectroDIY3 ай бұрын
I see. makes sense.
@veramocor1 Жыл бұрын
Just saw you on Amazon. Love your setup and delivery\presentation!
@ToolsElectroDIY Жыл бұрын
Thanks so much! Smash the like and subscribe :D
@sam108182 жыл бұрын
Background music is like in some thriller movie
@ToolsElectroDIY2 жыл бұрын
Do you like it?
@darkangelw84723 жыл бұрын
Thank you
@ToolsElectroDIY3 жыл бұрын
You're welcome
@n8n8n8n3 жыл бұрын
This desk deserves a good custom PC build, not this crappy apple junk. oh man, you sound like tim cook, are you sick or exhausted?
@ToolsElectroDIY3 жыл бұрын
Hi Hubson, thanks for leaving a comment. I'm not sure if this is a compliment or an insult: 1. Tim Cook is doing a great job being the CEO of Apple. I'm sure he is a great man. 2. English is not my native language. What comes natural to you doesn't necessary come easy for me. It requires a lot of practice and hours of hard work to make this video too. 3. Could you please share your custom PC build or other projects you have done? I look forward to watching it.
@n8n8n8n3 жыл бұрын
Hi @@ToolsElectroDIY Well according to the desk - great job, about the apple: 1. Tim Cook is doing a great job being the CEO of Apple. I'm sure he is a great man. - diagree, you should have seen some of his interviews. He is an iDiot. No need to mention what is he doing by selling overpriced devices not including earbuds and such basic thing like wallbrick. But of course you as an apple fanboy will never see it. 2. Mine neither, I just found that you sound like tim cook - really exhaused or sick, that's why I asked, you english is fine. 3. I am going to purchase a new PC and I will need a custom desk workplace, that's why I am here to check others' ideas, I need something basic, like yours, but definitely not with anything from apple, I am a reasonable man spending my money reasonably (by not buying overpriced junk from apple). Please see some of these: kzfaq.info/get/bejne/rbWJhZCIzbeXgp8.html It's for fun, but explains easly what apple is up to.
@Andriyapps Жыл бұрын
wow thats awesome
@ToolsElectroDIY Жыл бұрын
Thank you@
@willlane19693 жыл бұрын
Inadequate video of joining the two boards together
@ToolsElectroDIY3 жыл бұрын
I thought I covered every steps of the process. Which part of the joining was not clear?
@yelenaizgiyaev96319 күн бұрын
what are the mounts that are screwed into the wall called? where can I buy them? are they different sizes?
@ToolsElectroDIY9 күн бұрын
I repurposed them from an old bed frame.
@sub-lite580211 ай бұрын
Looks cool do you think a beginner can make this? Am trying to make my mom a floating table on an L shaped wall so we can add bar stool chairs then maybe some cabinets on the top, or some drawers on the side to save up some space. I have it all put tg in my head but idk how to go on about this but watching this made me wanna just try when i get some tools. I also love your MacBook set up on the wall that’s so cool that it connects to your monitor.
@ToolsElectroDIY11 ай бұрын
Yes you can do this. I was a beginner when I made this desk. You need some basic tools though, links in description. I also have a dedicated video for the wall mounted laptop dock.
@sub-lite580211 ай бұрын
@@ToolsElectroDIY Thank you When i get back home i will look at the tools and maybe watch your laptop dock i been wanting to make one for my iPad and i think it should be the same thing just a bit different.
@chiranjanshetty3 жыл бұрын
My man said he'll show us how to do this under $50 and goes on to use industrial equipments
@ToolsElectroDIY3 жыл бұрын
I meant material cost :)
@chiranjanshetty3 жыл бұрын
@@ToolsElectroDIY it was a joke 😔 didn't mean to offend king
@ToolsElectroDIY3 жыл бұрын
@@chiranjanshetty non taken.
@no_name68763 жыл бұрын
wonderful but i can't go for it bad luck. in our country the accessories devices you used may not be available to cut off and do this woderful desk😔 Take love from Bangladesh 🇧🇩
@ToolsElectroDIY3 жыл бұрын
Actually you can do it with a circular saw, which is pretty common.
@no_name68763 жыл бұрын
everything is s costly here
@kntwing23 Жыл бұрын
i saw your review on amazon i found u here also..i sub.
@ToolsElectroDIY Жыл бұрын
Thanks for the sub! Where on Amazon did you find me?
@CG-bc6zl2 ай бұрын
Does the desk flex in the middle? Does it need more support?
@ToolsElectroDIY2 ай бұрын
It does not fax in the middle. It has center support shown in the video if you watch again.
@mustache2295 Жыл бұрын
Thank you for the video. I recently purchased 2 6 foot butcher blocks and was going to use joist hangers with some wood as my mounting technique. Didn't even think about l brackets. I am concerned if the l brackets will support the weight property as the blocks are heavy but I suppose we will see. Also I recommend that you increase the sound of your voice when you edit. It was difficult to hear you.
@ToolsElectroDIY Жыл бұрын
Thanks for your feedback. I was inexperienced in video editing 2 years ago. Make sure you use heavy gauge steel brackets, it should be fine!
@mustache2295 Жыл бұрын
Thank you for the reply 😄 I'm also inexperienced. I only recently started editing videos, except it is my gaming clips that I upload to TikTok. Never thought I'd download that app. Anyways, I use something called CapCut. It's a simple editor but it provides a lot of useful functionality.
@yuvanbaldwinew92822 жыл бұрын
Yup coffee is good stain its smells good too.
@ToolsElectroDIY2 жыл бұрын
Exactly
@theawkwardturtle2 ай бұрын
Hi, great video! I'm just curious. Without using a frame underneath the tabletop, have you experienced any bending on the table over time?
@ToolsElectroDIY2 ай бұрын
No bending. The center is fully supported by a few brackets.
@SacrilegeGamingGodz2 жыл бұрын
It looks super nice but idk man, 3 brackets I dont think is enough. Those are some really long pieces. Its probably going to warp in the middle over time unless he puts rails along the bottom
@ToolsElectroDIY2 жыл бұрын
There are 8 brackets. It's not going to sack in the middle, as it as sufficient support. It's been a year and it's still works as new.
@louplay6 ай бұрын
Might of missed it but were you able to calculate the total weight the desk could hold?
@ToolsElectroDIY6 ай бұрын
No, it’s really hard to get that number unless I damage my wall or studs
@louplay4 ай бұрын
@@ToolsElectroDIY thought so that's all good. Another question, where would I find the brackets you used to fasten the desk to the wall?
@ToolsElectroDIY4 ай бұрын
@@louplay I recycled some hardware from my old bedframe. I’m pretty sure you can find lots of those L-shaped brackets from hardware store.
@KayzChannel100003 жыл бұрын
I LOVE IT !!!
@ToolsElectroDIY3 жыл бұрын
Thank you!
@cjsmith3 жыл бұрын
Clean Design 👍
@ToolsElectroDIY3 жыл бұрын
Thank you! Cheers!
@ninghir3 жыл бұрын
8:12 creepy AF
@ToolsElectroDIY3 жыл бұрын
haha!
@Polerface7743 жыл бұрын
Can you make adjustable desk DIY PLZ
@ToolsElectroDIY3 жыл бұрын
OK, you might wanna watch this one with standing desk kzfaq.info/get/bejne/n9hzrcqp3Ne-oHk.html
@bilalhussain39663 жыл бұрын
Where is part 2?
@ToolsElectroDIY3 жыл бұрын
kzfaq.info/get/bejne/at1po5eJqqfFkYU.html -- and I updated it again recently. see my recent videos.
@sethweirauch3 жыл бұрын
Super clean look, nice work. About how heavy is the desk it self? Looking to do the same design with hidden brackets like yours but worried about sagging without supports running the depth of the desk. Thanks
@ToolsElectroDIY3 жыл бұрын
Thanks for your comment! 50 ~ 80 lbs maybe? Put an Ikea Alexa drawer unit in the middle could help.
@shankarbn2 жыл бұрын
It's been a year since the video was uploaded. Did the desk sag at all? I'm planning a similar build and want to use 3 inch angle iron across the length and width of the board on three sides. What is your opinion?
@ToolsElectroDIY2 жыл бұрын
No, it didn't sack. The center is well supported by the studs. It will be fine. Go ahead with your plan.
@shankarbn2 жыл бұрын
@@ToolsElectroDIY Thanks. Appreciate it!
@stephaniebentley32122 жыл бұрын
The angle boards was the way I almost went before watching this video. His is so much cleaner & takes up minima space underneath the desk.
@sayiangod94043 жыл бұрын
My boy need to narrate on Animal Planet with that voice
@ToolsElectroDIY3 жыл бұрын
Thanks
@Year-tk9ii3 жыл бұрын
Sweet!
@ToolsElectroDIY3 жыл бұрын
Thanks!
@akhan9992 жыл бұрын
1. How is this a year on? Any bend in middle? 2. What wood is this? 3. How wide is the desk and how thick the wood? 4. Just down using metal brackets? I’ve seen people make wooden frames all the way around?
@ToolsElectroDIY2 жыл бұрын
1. No bend, no sack. Well supported in the middle. Watch my recent videos (laser level) e.g. you will see the desk in multiple recent reviews. 2. Pine. 3. 117 inches wide. 1.5 inches thick. (2 by 12 from Home Depot) 4. Right. L shape brackets are the only thing used.
@akhan9992 ай бұрын
Yeah just those brackets scare more, especially if you have a big 49inch ultra wide monitor not sure it can support it.
@akhan9992 ай бұрын
I might do a wooden frame and then in the very centre put a metal bracket for extra support maybe. But I have brick walls not studs so I got better support that way
@akhan9992 ай бұрын
I’m in UK
@Bodzilla00111 ай бұрын
How much load can it support though?
@ToolsElectroDIY11 ай бұрын
I didn't do a loading test. I think it should handle more than 200lbs.
@davidinzunza78043 жыл бұрын
Looking great, Thanks for sharing !!! On a previous message you mentioned the length of 116 in. on your wall. I'm designing something similar except on 98" x 24". And does the desk sag in the middle at all?
@ToolsElectroDIY3 жыл бұрын
Thanks! No it won't sag, I have enough brackets along all edges including the middle.
@triskeleassassin92033 жыл бұрын
@@ToolsElectroDIY what brackets did u use tried looking online cant find them
@ToolsElectroDIY3 жыл бұрын
@@triskeleassassin9203 bed.
@TheAdrenaline852 жыл бұрын
Bro said 50 dollars. But I bet most of us don’t have many of the tools he used 😅
@ToolsElectroDIY2 жыл бұрын
Basically it can be done with a circular saw and a drill.
@reactorleak74323 жыл бұрын
nice looking desk. I was watching the video closely, especially when you mounted the desk to the wall. Are you just hanging those with the brackets you installed to the wall? maybe i missed a step and I was curious where those brackets came from? Considering something similar.
@ToolsElectroDIY3 жыл бұрын
The L shape brackets are secured to the studs behind the drywall. They are recycled parts from a bed :)
@rdubw890429 күн бұрын
Did the boards bow over time?
@ToolsElectroDIY29 күн бұрын
No, it does not bow over thanks to the center support. If you watch the video again, you’ll find it.
@wondertwins22223 жыл бұрын
Beautiful! Excellent craftsmanship. What did you use for the stud finder exactly?
@ToolsElectroDIY3 жыл бұрын
Thank you. The stud finder I used is geni.us/oZeNPo It is basically has two very strong magnets (perhaps I forgot to put it under the video description.)
@jeremyhunter23192 жыл бұрын
Did you watch a different video?
@r.p481811 ай бұрын
I have 22 ultra snapdragon, it's worth paying 300 € more, I'll get s23 ultra, what do you suggest, master 
@ToolsElectroDIY11 ай бұрын
I don't know. Never used it before.
@dchiniwal Жыл бұрын
link to those brackets please
@ToolsElectroDIY Жыл бұрын
Those are recycled from an old bed.
@rayray31583 Жыл бұрын
Did you build that jig @ 0:47 ? How does it work? Would love a jig for jointing. I have a similar table saw
@ToolsElectroDIY Жыл бұрын
Yes I build it using a flat MDF board. You can find plenty of tutorials on KZfaq.
@violetvalentine64513 жыл бұрын
nice! I was skeptical at first but the coffee looks good on that fir. If you don't mind me asking, how wide is that wall? And does the desk sag in the middle at all? I'm designing something similar except on an 11ft wall and its got to come out 30in.
@ToolsElectroDIY3 жыл бұрын
116 inches long. somehow I'm having trouble posting reply to your reply.
@devgabriel68983 жыл бұрын
Awesome! Really beautiful desk!. Question: Is not going to curve the table with the time?
@ToolsElectroDIY3 жыл бұрын
Thanks! It doesn't sag at all thanks to brackets along the wall. You might be interested in this video with that floating table too kzfaq.info/get/bejne/oJ1gd9Zzpreaf6M.html
@Blanchy1018 ай бұрын
Where did you get the wall brackets?
@ToolsElectroDIY8 ай бұрын
old bed frame.
@abdelkadersefraoui2 жыл бұрын
3:41 I love the idea of coffee staining. Very interesting! Does it come off tho?
@ToolsElectroDIY2 жыл бұрын
No, it doesn't come off. If it does, re-apply!
@galaxygames9635 Жыл бұрын
wont it bend tho in the middle due to the weight?
@ToolsElectroDIY Жыл бұрын
no. the middle is fully supported by the same metal bracket.
@Doc_McStuffins3 жыл бұрын
Can't tell how you made the power cord sleeve and do you use some sort of docking station for your MacBook? This is so clean. Come make one for me please!
@ToolsElectroDIY3 жыл бұрын
Yes you can search for MacBook dock in my KZfaq channel. I have a very detailed video about the making of the dock.
@christopherortiz87132 жыл бұрын
Looks great.. Never seen someone use coffee as a stain. Looks good though. Did you have some kind of support so it would not bow down in the middle?
@ToolsElectroDIY2 жыл бұрын
Yes I have. it won't sack.
@xnrv2 жыл бұрын
What happends, when someone sits on this table? Or try to put large printer on it?
@ToolsElectroDIY2 жыл бұрын
printer is no problem.
@xnrv2 жыл бұрын
@@ToolsElectroDIY Ok, thanks for answer.
@JoseLopez-ob4is Жыл бұрын
jajaj quiero dos mac para hacerlas banquitos
@ToolsElectroDIY Жыл бұрын
sounds good
@manuelavendano38913 жыл бұрын
By having the frame attached to the wall, the desk doesn't wobble at all, am I right? Have a good one!
@ToolsElectroDIY3 жыл бұрын
No it doesn't wobble at all, nor does it sack.
@virginiademelo Жыл бұрын
How much weight does is stand?
@ToolsElectroDIY Жыл бұрын
Never tested.
@maziz802 жыл бұрын
Would those wall mounts be able to hold the weight? Looks like it’s a plaster board wall, right?
@ToolsElectroDIY2 жыл бұрын
Pine wood studs behind the dry wall.
@realvanillahair Жыл бұрын
where did u get the metal studs/brackets to hold the table top plz? i am googling but only small pnes are coming up
@ToolsElectroDIY Жыл бұрын
Recycled parts from an old bed frame.
@abhishekkumarsingh42843 жыл бұрын
Music name plz
@ToolsElectroDIY3 жыл бұрын
Sorry I forgot. It's from KZfaq "Audio library"
@peternguyen64583 жыл бұрын
i know you did not just use a mac pro as a chair
@ToolsElectroDIY3 жыл бұрын
No I didn't.
@ladiviniiisimagarza3 жыл бұрын
Hello, my name is Luz. A couple of weeks ago you gave me some shopping recommendations to start my music & movement class streaming. I am no longer able to find the list you Kindly made for me. Would it be possible for you to provide me again with the list? greetings!! Luz Elena Romano
@ToolsElectroDIY3 жыл бұрын
Sure Luz, here you go, they are under the "Streaming Gears" of my amazon profile page www.amazon.com/shop/toolselectrodiy Please also bookmark it and come back to my live stream (when I'm live, the video is displayed on this page. usually after 7PM EST.)
@ladiviniiisimagarza3 жыл бұрын
@@ToolsElectroDIY Hello!!! thanks for answering back!! you are of great help!!! greetings!!!
@ToolsElectroDIY3 жыл бұрын
@@ladiviniiisimagarza Enjoy! Let me know what your choices are. I'm curious about your setup too.
@Raghav-ww1bt2 жыл бұрын
What's stud finder, is it used to find concrete beams and columns? Can I just drill in brick wall, my wall's 12 inches thick .
@ToolsElectroDIY2 жыл бұрын
In USA, we have wood beams behind the dry wall. Therefore that magnet is used for finding them based on nails. If you have a brick wall, you can drill wherever you want to mount this desk.
@Raghav-ww1bt2 жыл бұрын
@@ToolsElectroDIY thanks that helps. I cut down an old thick Neem tree on my property a year ago because it had developed a rot cavity inside its trunk near the base. I'm soon going to get it milled into planks (it will be a lot of them) in few days. So I'm going to make some diy furniture out of them and save the remaining materials for when we decide to make new or expand our house.
@judgepage6605Ай бұрын
What anchors did to you use?
@ToolsElectroDIYАй бұрын
Repurposed bed frame
@judgepage6605Ай бұрын
@ToolsElectroDIY ahhh that explains it lol
@krishnasharmacool3 жыл бұрын
Could you also share the dimension of that table?
@ToolsElectroDIY3 жыл бұрын
117'' x 21.5''
@Orbzmaster112 жыл бұрын
Can I have a link to the brackets pls
@ToolsElectroDIY2 жыл бұрын
Recycled from an old bed frame.
@Orbzmaster112 жыл бұрын
@@ToolsElectroDIY where can I buy them so y know pls
@AnaMarcu Жыл бұрын
Are the wall studs made of wood or metal?
@ToolsElectroDIY Жыл бұрын
Wood
@Azzy1183 жыл бұрын
You sound like Christopher Walken 😅
@ToolsElectroDIY3 жыл бұрын
You like?
@kntwing23 Жыл бұрын
nice looking desk..make me 1 for free.. i buy the wood..
@ToolsElectroDIY Жыл бұрын
It took me a week to build! LOL
@baljazz2 жыл бұрын
What is the max weight each bracket can hold?
@ToolsElectroDIY2 жыл бұрын
I don't know. Recycled material from a bed frame.
@shadainbond3 жыл бұрын
What's the dimensions of the table
@ToolsElectroDIY3 жыл бұрын
117'' x 23''
@Harry-fd6ih2 жыл бұрын
Hi just wanted to ask about cable management, ddi you leave a gap between the table and the wall for the cables to run though? Or just you just cut one hole?
@ToolsElectroDIY2 жыл бұрын
a little gap. and a hole.
@WORK-HARD.PH.992 жыл бұрын
Ohhhhhh
@ToolsElectroDIY2 жыл бұрын
Yes!
@shawnthomas853 жыл бұрын
Where can I get the brace you use on the wall
@ToolsElectroDIY3 жыл бұрын
They are from an old bed. I didn’t buy them.
@shuyangzhu40953 жыл бұрын
It looks great! Could you share what brackets did you use?
@ToolsElectroDIY3 жыл бұрын
I didn't spend a penny on brackets, they are recycled components from bed or cabinet brackets from ikea I guess :) I'm sure you can find similar ones from your local hardware store.
@shuyangzhu40953 жыл бұрын
@@ToolsElectroDIY haha. That's why they all look different. Thanks.
@ToolsElectroDIY3 жыл бұрын
Shuyang Zhu a true DIYer, build things from scratch, with scrap.
@ToolsElectroDIY3 жыл бұрын
I hope you enjoy this video, please click like, it really helps my channel and KZfaq algorithm so more people can see it, thank you! I have more interesting videos in my pipeline!
@shuyangzhu40953 жыл бұрын
@@ToolsElectroDIY Definitely clicked like, and hope to see more videos.
@curiousskipper3 жыл бұрын
How much weight can hold by your desk?
@ToolsElectroDIY3 жыл бұрын
I didn't do a load test. I think it should hold more than 300lbs.
@hasandeniz66123 жыл бұрын
Great work! What is the desk size?
@ToolsElectroDIY3 жыл бұрын
117 inches by 23 inches.
@dkfresh6656 Жыл бұрын
Where did you get the wall mount hardware?
@ToolsElectroDIY Жыл бұрын
Repurposed bed frame.
@TheWesman452 жыл бұрын
Sure 50$ plus the 10k in tools.
@ToolsElectroDIY2 жыл бұрын
If you are on a budget, it can be done with a circular saw and a drill.