TOOTH OF THE ARROW 3 BLADE: BROADHEAD TEST

No video

TOOTH OF THE ARROW 3 BLADE: BROADHEAD TEST

Рет қаралды 8,414

2 ай бұрын

This is a test of the 100 gr Tooth of the Arrow 3 blade.
Here is summary of my 2024 Testing Procedure & Scoring w/the scores of this head posted in parenthesis as well.
1. Flight Forgiveness (20%, 16 pts)
I'm using a Killer Instinct SWAT X1 crossbow, mounted to a BOG tripod, shooting a 670 gr Bishop Archery GOAT bolt (300 fps) at 30 yds. Field points consistently hit in the 10 ring & bullseye. I use the exact same bolt to shoot the broadhead. The only difference in the two shots is the broadhead's flight forgiveness vs that of the field point. A bullseye gets a score of 11/10, or a perfect score of 20 + 1 Bonus Point. The 10 ring gets a 10/10, or 20 points; a 9 ring gets a 9/10 or 18 points...& so forth, with each wider ring being 1/2" farther from the bullseye. Mechs are also given 1 Bonus Point for extra forgiveness.
2. Cut Size (20%, 12.85 pts)
The more tissue being cut, the more lethal the head, all else equal. The entrance cut, total cut, & width of the cut (a crucial variable for bloodletting) are all scored:
The entrance cut size is compared to a standard of 2.5" then that fraction is weighted to 7% of the score. (1.69" = 4.73 pts)
The max cut size is compared to a standard of 2.5" as well, then that fraction is is weighted to 7% of the score. (1.69” = 4.73 pts)
The max cutting diameter is compared to a standard of 2.0", then that fraction is weighted to 6% of the score. (1.13" = 3.39 pts)
3. Blades (20%, 17.62 pts)
Initial sharpness (9%, 319 grams = 8.81/10 = 7.93pts) & Edge Retention (9%, +73 grams = 8.54/10 = 7.69 pts) are measured using the Edge On Up Sharpness Tester. The pressure needed for a blade to cut thru a copolymer wire is measured in grams.
Edge Retention is the loss of sharpness after the head is shot in Penetration Test 1, thru 1/2" MDF & 2/3" rubber foam mat & Clear Ballistics FBI gel. For every 50 "grams" of sharpness lost, 1 point is deducted from 10.
What are some sharpness scores for common edges?
A butter knife takes 2000 grams of pressure to break the co polymer wire.
A new high end cutlery edge: ~ 375 grams of pressure.
A utility razor blade: 200 grams.
Based on the many broadheads I have tested, here is my scoring scale:
Out of the Box Sharpness:
0-200 gr: 10
201-300 gr 9
301-400 gr: 8
401-500 gr: 7
501-600 gr: 6
601-700 gr: 5
Ease to resharpen or replace blades is judged & given 2% of the score. (10/10= 2 pts)
4. Penetration (20%, 17.87 pts)
There are 2 penetration tests:
Pen Test 1: 1/2" MDF, 2/3" rubber foam mat, Clear Ballistics FBI gel. Depth of penetration is compared to a standard of 9" & weighted to 10% of the score. (8.5" = 9.44 pts
Pen Test 2: Layered cardboard. # of layers penetrated is compared to a standard of 70 layers & weighted to 10% of the score.
( 59 layers= 8.43 pts)
5. Durability (20%, 19.88 pts)
Each head is shot thru 1/2" MDF 3 times. Its condition is judged 1-10 & weighted to 12% of the score. (10/10 = 12 pts)
If a head survives that, it is then shot thru 22 ga steel plate twice. Its condition is judged 1-10 & weighted to 5% of the score. (9.75/10 = 4.88 pts)
If a head survives that, it is then shot into concrete once. Its condition is judged 1-10 & weighted to 3% of the score. (9.75/10 = 2.93 pts).
Steel plate & concrete are certainly not "realistic" mediums, but they do reveal the outer limits of a head's durability.
BONUS:
+.5 pts triangular holes in steel plate
TOTAL SCORE: 84.72 pts = 9 Golden Arrows
Price: $15/head using LUSK19 discount code of 10% off
Special Notes:
Please check out my sponsor, Stay Sharp Guide. staysharpguide... or @Innovative Outdoorsman They make excellent broadhead sharpeners. The support I receive from them has helped me improve my channel
I also have some Discount Codes I can share:
Accubow: LUSK10 saves 10%
Afflictor: LUSK10 saves 10%
Accubow: LUSK10 saves 10%
Afflictor: LUSK10 saves 10%
Annihilator: LUSK10 saves 10%
Bishop Archery: LUSKFIVE saves $5 on any order
Contact-Archery.com (formerly Method & Vector): LUSK10 saves 10%
Crimson Talon: LUSK10 saves 10%
Easton Bowtruk 2: LUSK25 saves $25 and Free Shipping
Evolution Outdoors--Jekyll & Hyde heads: LUSK10 saves 10% on any order
Exact Archery: LUSK10 saves 10%
Kayuga Broadheads: LUSK10 saves 10% on any order.
Lathrop & Sons Synergy Footbeds: Lusk1000 saves $10 on any order
Ozcut Broadheads: LUSK10 saves 10%
SEVR: LUSKFIVE saves you $5 on any order & can be used on top of any online sales.
Terra Firma: LUSK5 saves 5% on any online sales
Tooth of the Arrow: LUSK19 saves 10%
Toulou Broadheads: LUSK10 saves 10%
TRIFECTA: LUSK10 saves 10% on any order.
VPA: LUSK10 saves 10%
ZEUS & HERA Broadheads (New Era Archery): LUSKFIVE saves $5/pack

Пікірлер: 90

@cosmogervasi4496 2 ай бұрын

Didn't expect the concrete to break apart like that, that's one tough broadhead ... 😎🏹 🐗🦌PS, Glad you're doing well and back to doing videos ... 😎👍

@caseysmith544 2 ай бұрын

I like how for some in places with rocky landscape or very hard super packed clay ground, a head like this is going to serve people well.

@LuskArcheryAdventures 2 ай бұрын

Well, I won’t be able to do vids for another few months. But I have vids complete and scheduled to post thru September

@charleywalker2982 2 ай бұрын

Thanks for sharing your knowledge and keep your videos coming please.

@LuskArcheryAdventures 2 ай бұрын

Thank you Charley. I really appreciate the encouragement.

@Lethal1160 Ай бұрын

Love tooth of the arrow, for my trad setup I've been thinking of checking out ozcuts 2 blade, and was very surprised you haven't made a video on those yet! I research every head I consider through your testing! Lol

@LuskArcheryAdventures 21 күн бұрын

I just finished testing the new Ozcut Hurricane and the new Ozcut elite three. I have the elite twos as well, but they will not make it into this year‘s testing. I just have so many more Broadhead testing? I could possibly fit in.

@Lethal1160 21 күн бұрын

@@LuskArcheryAdventures fair enough, I appreciate your response buddy! And all your testing videos. You do a great job truly testing each head in every way imaginable.

@drewriggs812 2 ай бұрын

I expected it to excel in the zero stop test, but that exceeded my expectations!

@LuskArcheryAdventures 2 ай бұрын

Yep. It’s tough that’s for sure.

@InTheYear 2 ай бұрын

Awesome content! Love them Tooth of the Arrow

@LuskArcheryAdventures 2 ай бұрын

Nice

@frankbrowning328 2 ай бұрын

I really like that pyramid tip, penetration, and the holes it put in that sheet metal. This is a nice design. I'm sure it could be sharpened a little better at home.

@LuskArcheryAdventures 2 ай бұрын

Yep. Well said Frank.

@hikingwithaviking8529 2 ай бұрын

Would like to see a comparison video of it sharpened up.

@LuskArcheryAdventures 2 ай бұрын

The only thing that would change is the sharpness. Sharpness has almost zero effect on penetration, believe it or not-at least in the mediums I test with. I’ve dulled heads with a steel file and had them penetrate almost as well as razor sharp heads of the same model.

@user-ii8up3jx8b Ай бұрын

@@LuskArcheryAdventures Hi John, really interesting observation. I see someone further in the comments related this head to the Ozcut 3 blade. I'm interested in seeing your review of the more recent stainless steel version of the Ozcut Hurricane - I just picked some of these up and they appear to be different in construction than the earlier version. I've found sharpening both versions to be doable but challenging - may not matter much if indeed it doesn't affect penetration significantly. Thanks for all you do for this community - it is important work.

@josephr1198 2 ай бұрын

Sound is a little funky on this one. Thanks for the test.

@LuskArcheryAdventures 2 ай бұрын

Sorry about that. Not sure what happened.

@josephr1198 2 ай бұрын

@LuskArcheryAdventures no problem just wanted to make you aware if you were, though sometime it's just my set up as well.

@vfonte218 2 ай бұрын

I was surprised with the accuracy and sharpness

@LuskArcheryAdventures 2 ай бұрын

Yeah, the sharpness can be easily fixed, with it being so easy to sharpen on any flat surface.

@JohnTomasella 2 ай бұрын

I shoot the 4 blade and love them. Fly exactly like my field tips.

@LuskArcheryAdventures 2 ай бұрын

Yeah, those four blade 1 inch heads fly incredibly well. One of the best flying heads on the market.

@critter852004 2 ай бұрын

I’ve tried their solids and vented. I prefer their vented series. Just way easier to tune and better grouping for me. The solids might be better for someone else, but when you’re playing the 25 yd and in game with white tails. The sound the vented makes doesn’t matter.

@LuskArcheryAdventures 2 ай бұрын

Thanks for sharing your experience.

@mdk62 2 ай бұрын

John Lusk, what are the top 5 3 blade heads you have tested. Like everyone else, im on a budget. Love the videos I've been watching for years. Keep them coming

@LuskArcheryAdventures 2 ай бұрын

Man, it’s hard to say. They’re are at least 50-maybe 100 that I’ve tested. There are the one piece 3 blades then the replaceable blade models. So many different cutting diameters, blade thicknesses, lengths, materials, etc. I just tested the new Kayuga that is probably the best penetrating. The Exodus is probably the best all round. The Bishop Holy Trinity is probably the toughest, the Cutthroat is amazing, as are the Valkyries. Just too many to pick the best.

@markb8360 2 ай бұрын

Go with exodus. You won’t be disappointed. Or consider a two blade Magnus like the stinger or black hornet with bleeders - while not a 3 blade, Magnus warranty and customer service is unbeatable. They do make a 3-blade but I prefer their 2 blade designs.

@garrettschienschang7898 2 ай бұрын

Another great test. Any chance of you testing the Simmons safari?

@pathfinder5804 2 ай бұрын

I hope so!!! I’d like to buy some if I could see a review.

@LuskArcheryAdventures 2 ай бұрын

I love testing Simmons. With my recent back surgery I doubt I can add it into 2024. I already have 40 more lined up to test and another 20 already done and scheduled to drop

@garrettschienschang7898 2 ай бұрын

@@LuskArcheryAdventures it was just an idea. If you get around to it eventually that’s great if not that you anyways for all the other fantastic information you give out

@markb8360 2 ай бұрын

Not a fan of solids. I get more shots out of replaceable blade broadheads because damage is easier to sharpen out and you can swap blades if too far gone. To each their own though. This does look like a tough head. Love your testing, btw.

@LuskArcheryAdventures 2 ай бұрын

Thanks for sharing your thoughts.

@David-vi6qx 2 ай бұрын

Thanks for the video. I have some and curious am to the diamond plates. Do you need to buy the guide to assist in sharpening?

@LuskArcheryAdventures 2 ай бұрын

It makes it easy to hold the head, but not necessary.

@David-vi6qx 2 ай бұрын

Thank you.

@155michaelx 2 ай бұрын

awesome

@LuskArcheryAdventures 2 ай бұрын

@tracysegraves9965 2 ай бұрын

They put out an impressive head no doubt about it but that sevr 1.75 is just my preference.

@LuskArcheryAdventures 2 ай бұрын

I love that head as well.

@stick__shooter 2 ай бұрын

Not bad, but I like the Ozcut 3B design better. Thicker blades and blades have more support at the ferrule. The weak connection where the blades meet the ferrule is a major design flaw on the TOTA 4 blades and this one doesn't look better.

@LuskArcheryAdventures 2 ай бұрын

Thanks for sharing your thoughts. I’ve never seen a weak connection where the blades meet the ferrule, personally.

@stick__shooter 2 ай бұрын

I snapped blades clean off the ferrule on a standard 4 blade and XL, and talked to others that have had it happen as well. I don't think it would happen in a hunting situation but still a weak point.

@TheArrowBuilder 2 ай бұрын

I'm a huge fan of 3 blades but I don't understand the intent of this design outside of ease of sharpening... however the F4 sharpener fixes that. If you really need penetration go with their 2 blade single bevel. Otherwise I prefer the 4 blade regular solid (or vented) as this head is going to fly worse than it for most, cut less for a marginal improvement on bone. Ashby actually says that a 4 blade is better on bone. 2 planes of splitting vs 3. I really wish they kept the same total length of the 4 blade XL making the head have less surface area on the blades. Then added some thickness into the blades to get the weight right. The weakness of the XL version is the blades can snap off. This design has more surface area than needed and doesn't fix that issue. Doing something 1.25" cut but shorter would have flown like a 4 blade reg solid (great) but had Exodus size cut at 1.875" TOA Reg = 2" cutting surface. Pen Test 1 8" & 72 layers Pen Test 2 TOA XL = 2.375" Cutting Surface. Pen Test 1 7" & 63 layers Pen Test 2 TOA SB = 1" Cutting Surface. Pen test 1 9.5" & 65 layers Pen Test 2 TOA 3b = 1.6875" cutting surface. Pen test 1 8.5" & 59 layers Pen Test 2

@LuskArcheryAdventures 2 ай бұрын

Thanks for sharing all that. Good thoughts.

@jamieyarbrough5229 2 ай бұрын

Question, how does the four blade 1” do on whitetail Deer

@stick__shooter 2 ай бұрын

Does well. I shot a doe with one, double lung, she went 40 yards and crashed. Similar size hole to a Exodus 3 blade.

@LuskArcheryAdventures 2 ай бұрын

I’ve taken a good number of deer and hogs and even elk with them. They’ve always done well.

@williamkantzler1619 2 ай бұрын

Love your videos , only thing I would like to see is you go back to testing accuracy with a bow not a crossbow. I understand trying to take human error out of it , but crossbows just shoot fixed heads more accurately in my experiences.

@LuskArcheryAdventures 2 ай бұрын

Thanks for the feedback. Honestly, I have found just the opposite to be true. The crossbow is much more difficult to get fixed blade heads to fly well out of. So due to the consistency and repeatability, I really like using it for the accuracy testing. And overall, the heads that flew well out of my vertical Bell also fly well out of the crossbow. So the results are consistent.

@scottm2244 2 ай бұрын

What do you think of the new Annhilator hypo 2 being released here soon?

@LuskArcheryAdventures 2 ай бұрын

I got to look at it at the ATA. I’m eager to test it when it comes out.

@scottmyers4802 2 ай бұрын

Love the durability of their heads but sharpness is unacceptable from a new out of the box broadhead in my opinion. You should not have to sharpen a broadhead before use. 😒

@LuskArcheryAdventures 2 ай бұрын

Yeah, I hear ya. My honest take on it is that these are plenty sharp to hunt with very successfully. But for those who want extra sharpness, a 3 blade one piece head is the easiest there is to sharpen.

@Tyler_Lyons 2 ай бұрын

You should sharpen every broadhead out of the package, regardless of price. If you shoot them into a target, sharpen them. The difference is crazy once you know what a truly sharp broadhead is. I don’t think there are any, maybe iron will, that are hunting ready sharp for me out of the box.

@greekmaster1001 2 ай бұрын

@@LuskArcheryAdventures that is true all you need is a flat stone

@floridaguyoutdoors6325 2 ай бұрын

Did you try sharping it after the test? If so how well did it sharpen back up ?

@LuskArcheryAdventures 2 ай бұрын

I did not. But I know this steel well enough to know it will sharpen very easily; especially with the 3 blade design.

@wesr1490 2 ай бұрын

For a head of that small of a profile I would have expected much better accuracy and definitely one of the worst out of the box sharpness wise. Amazing durability though.

@LuskArcheryAdventures 2 ай бұрын

Yeah, I hear ya.

@timbow50 2 ай бұрын

Appears to be lacking on sharpness right out of the package? Hoping people would notice that and touch up the blade. Overall, IT IS A WINNER! 👍👍👍👍

@LuskArcheryAdventures 2 ай бұрын

Yep. Super easy to sharpen up a 3 blade single piece head.

@littlewoody5539 2 ай бұрын

👍👍

@LuskArcheryAdventures 2 ай бұрын

Thanks

@elncalls 2 ай бұрын

I feel the missed the mark on this one. I am sure it is fine, but it seems it underperforms on killing prowess.

@LuskArcheryAdventures 2 ай бұрын

Yeah, it is what it is. Many people wanted a 3 blade that they made a solid one.

@pedropistolas8497 20 күн бұрын

Top 3 3-blade one piece broadheads?

@LuskArcheryAdventures 20 күн бұрын

They’re good, but there are some really nice ones-like the SS3, Ozcut Hurricane and Ozcut Elite 3. All those tests are coming up in the weeks ahead.

@pedropistolas8497 20 күн бұрын

@LuskArcheryAdventures i got the ozcuts based on your last review of them, looks like they went all stainless? Will be tuning in!

@douglasvaughn9530 2 ай бұрын

Could've been sharper out of the pack. It's not going to be as forgiving as a vented 3 blade either. I haven't liked the flight characteristics of any solid non vented 3 blade I've shot.

@LuskArcheryAdventures 2 ай бұрын

Thanks for sharing that experience.

@charleywalker2982 2 ай бұрын

👍 ❤

@LuskArcheryAdventures 2 ай бұрын

Thanks for watching.

@KTMsoldier1988 2 ай бұрын

Sharpness wasn't on point but that could be improved before you take it hunting

@LuskArcheryAdventures 2 ай бұрын

Yep

@Lawnfella 2 ай бұрын

Flight not that great and pretty dull. But it’s tough

@LuskArcheryAdventures 2 ай бұрын

Yeah, flight was pretty good, comparatively. Sharpness can be improved, and is super easy with this head.

@matthewyu3531 2 ай бұрын

Hi, do you use lighted nocks for hunting? If so, do you use them in the rain? Many people said that lighted nocks were unreliable, they said lighted nocks sometimes lighted up and sometimes didn't, and they also said lighted nocks introduced shooting errors. Do you think they work reliably?

@LuskArcheryAdventures 2 ай бұрын

Yes. I only use lighted nocks-in practice and hunting. Rain and temps do not affect them. Different brands have different reliability. But they are usually effective.

@matthewyu3531 2 ай бұрын

@@LuskArcheryAdventures Thank you very much ! 🙏🙏🙏

@user-ve2fs6rq2x 2 ай бұрын

Not sharp or accurate even in video

@LuskArcheryAdventures 2 ай бұрын

The accuracy was fairly good, as the score indicates. The sharpness is something that is a weakness, but is fairly easy to fix.

@davefisher5196 2 ай бұрын

Other heads that were this dull got a worse score and yes it is a easy fix but for that price it should not have to be fixed

@Tyler_Lyons 2 ай бұрын

@davefisher5196 2 ай бұрын

@@Tyler_Lyons there are a lot of none, designer aka expensive heads that are super sharp right out of the package. Exodus, Stingers Thunderheads etc Of course you need to re-sharpen a broadhead if you shoot it in to a target if you are going to hunt with it. If I shoot a broadhead into a target it becomes a practice head. Everyone on AT says you need to sharpen IW's when you get them in the mail.

@bobstoddard1796 2 ай бұрын

Not sharp or accurate

@LuskArcheryAdventures 2 ай бұрын

Well, pretty average for accuracy; and at least it’s extremely easy to sharpen. But yes, those were the weaker areas of the testing. Excellent on durability; a bit above average on penetration.

@bigg9101 26 күн бұрын

I do not like the way these fly….