Tour Most Innovative 3D Printed House in the World With Head Architect

No video

Tour Most Innovative 3D Printed House in the World With Head Architect

Рет қаралды 12,590

Күн бұрын

This day was the highlight of my career to date! This project completed by PERI with a COBOD BOD 2 printer really demonstrates the cutting edge of 3D printed construction technology. There is a ton of responsibility on the architects to fully explore and utilize all the benefits of automation. Bringing this technology to fruition requires creative design, creating spaces people will be excited to live in.
Most innovative printed house in the world video: • The Most Innovative 3D...
It is such a unique opportunity to see this project while it's under construction. When the project is complete there will be some finishings like tile, cabinets and wall fixtures covering up the raw concrete. This timing gives us the opportunity to see what the raw 3D printed walls look like and I must say it is extremely impressive.
Waldemar Korte truly enjoyed designing this project and watching it become reality. They were able to get the rest of the subcontractors equally excited demonstrated by their willingness to work on this project without profit. It's very rare in the construction industry to get people who are willing to work without pay just for the sake of being a part of an exciting project and this is one of those rare examples.
Walk through this building with us and see all of the details brought to life through german engineering!
mense-korte.de/
www.peri.dk/
cobod.com/
Check out my site
automate.const...
Book an hour with me
Jarettgross.yo...

Пікірлер: 103

@80club45 3 жыл бұрын

Been in the construction industry for 10 years, this is the future no more wood structures

@automateconstruction 3 жыл бұрын

Right? Lumber is just getting too expensive and concrete will last longer!

@savarzei 3 жыл бұрын

Not so sure. Concrete is producing CO2 and new regulations will be put in place in favor of wood.

@80club45 3 жыл бұрын

@@savarzei that's why this is so interesting it's at its infancy How about recycled plastic 🤔

@enriko44 3 жыл бұрын

@@savarzei material science will advance like crazy in the next years. We'll have concrete mixtures that are CO2 neutral or even traps it somehow. Don't see how cutting forests can be more sustainable...

@thorfriis6284 3 жыл бұрын

I wonder if geopolymers could be an answer to the high CO2 emissions associated with the production of Portland cement?

@JohnDoe-gs1cb 3 жыл бұрын

I believe all this kind of projects should be open and free for the humanity... The company could win money for their services...

@HowToADU 3 жыл бұрын

Love what COBOD is doing - thanks for the great content. You're our guy on the inside of all these businesses!

@patrickmckowen2999 3 жыл бұрын

Very nice. For visual finish I am more of a Rammed Earth person but I also understand the difference in labor cost. Looking forward to seeing the place completed and decorated/furnished. Cheers

@thorfriis6284 3 жыл бұрын

Awesome video Jarett. Been waiting to see how this Beckum project was traveling. If ever there was a proof-of-concept for 3D printed buildings then this is it--a real building that is going to house a family.

@josephdruther5080 3 жыл бұрын

Great video jarett

@automateconstruction 3 жыл бұрын

Thanks!

@curtisthomas8935 2 жыл бұрын

Excellent great work

@budgetaudiophilelife-long5461 3 жыл бұрын

👍🤗. KEEP UP THE GOOD WORK 😍😍😍

@guitarlessonswith4480 3 жыл бұрын

I gotta have one!

@Enginomics 3 жыл бұрын

Great work Jarett! Exciting to see how your channel and the 3d printing technology is coming along.

@seanmichaelnugent1 3 жыл бұрын

great stuff!!!

@enriko44 3 жыл бұрын

Thanks for another great video Jarett. Also welcome to Europe! Have you heard of any commercial projects in the South of Europe (Spain, Portugal) or even in the East (Poland, Baltics)?

@automateconstruction 3 жыл бұрын

Commercial projects no but there are some really cool experimental projects in Spain and Italy.

@tailiu2525 3 жыл бұрын

would love to see the finished product and costs breakdowns/comparisons!

@automateconstruction 3 жыл бұрын

Coming this summer, it’s very difficult to get these companies to divulge cost information.

@westleywest7259 3 жыл бұрын

@@automateconstruction And that’s why we’re skeptical...

@mollyhohenzollernstewart7444 3 жыл бұрын

Lol 😂 you know why they don’t public cost to build the house ;) because it is way expensive

@frontbattles8090 3 жыл бұрын

summer is over where can i find it?

@michaelrascon3844 3 жыл бұрын

Sooo amazing!

@shawnsasser4001 3 жыл бұрын

Now I have to find away to buy a cobod2

@sigmata0 3 жыл бұрын

This is awesome. I'm surprised they haven't added explicit data points or wiring. I could imagine putting cat 6 points or even fiber in the same way as they have put in electrical plug points together with stations for wireless access points within the structure. Perhaps even 4G/5G repeaters as I doubt there is much permittivity though the concrete in various areas. Down the line I could even expect small SoC installations with microphones so that you could access digital assistants like Siri, Alexa, and Google Assistant anywhere within the house without having to have standalone devices exposed. Apart from the passive lighting, I wonder how they are going to do the rest of the lighting for the house? I'm guessing it will be conventional. I love the heat management built into the structure. Thanks for the video. I hope you get to show how it all turns out.

@automateconstruction 3 жыл бұрын

They probably have done something along those lines for the smart home system and just didn’t mention it.

@sigmata0 3 жыл бұрын

@@automateconstruction Understood thanks.

@davidhronowski5114 3 жыл бұрын

I want that house built in Maryland for $ 120,000.

@westleywest7259 3 жыл бұрын

Dream on...

@mariospizzaandwinebar 3 жыл бұрын

The average cost of building a home in the U.S. is $150 per square foot. What’s the average cost building a 3D home?

@automateconstruction 3 жыл бұрын

Great question but there’s not enough data and the location matters too much in California construction is $350/sqft

@carlwatts1230 3 жыл бұрын

I have been following Apis Cor but they don't have a very active online presence. I think they have a couple a projects in the usa. Would be great to see some of these buildings up close like we saw this house in Germany.

@automateconstruction 3 жыл бұрын

No they don’t, they tried to but Apis cor hasn’t built anything in America yet. Hopefully they will soon.

@carlwatts1230 3 жыл бұрын

Too bad. I have high hopes for them as it relates to cost efficient housing solutions. It seems their setup with the portabe printer might be able to quickly print many small houses (if regulators and regulations don't prevent it which sadly seems to be a big if). Do you have an estimate yourself on the bottom price for a small 3d printed house? The small house Apis Cor built a few years ago (in Russia it was I think) cost 10k dollars in total if i recall correctly. It was supervised by two people and seems to have taken a total of 2 days to be fully printed. Do you think that price is realistic? Do you know more about what was and was not included under that price? Given your familiarity with the space do you think it is possible to build a small house for under 20k if existing technologies like 3d printing are maximally leveraged in the process? Thanks for doing the work you do shedding light on these projects. I discovered your channel today but I'll be checking out previous content. Cheers

@automateconstruction 3 жыл бұрын

Carl Watts at the moment you can expect a printed house to cost 20-40% more than traditional construction because it’s so new. There’s potential for savings but the industry needs to reach a big enough size to achieve efficiency though economies of scale. It’s probably another few years away before printing a house is really cheaper than normal construction but the increase in lumber prices brought it much closer.

@just..someone 3 жыл бұрын

The quality on this "print" looks great, but keep in mind that usually to get sth new certified for human use is quite heavily regulated. (Which is why it took them a year to get this project going.) A good analogy is how you can drive a car in the US vs the TÜV. I think jalopnik has a video on that .

@just..someone 3 жыл бұрын

Also great content btw!

@duanebromfield8602 3 жыл бұрын

I would love to get into this industry, what would first steps be like?

@kendallnavstar 3 жыл бұрын

*I HAVE THE SAME IDEA BUT DON'T KNOW HOW TO GET STARTED.*

@automateconstruction 3 жыл бұрын

Raise money and buy a printer!

@automateconstruction 3 жыл бұрын

Do you have any relevant experience? If not no problem! You can learn everything as you go! A bit of 3d printing experience would help a lot!

@duanebromfield8602 3 жыл бұрын

@@automateconstruction what would you recommend i buy?

@automateconstruction 3 жыл бұрын

@@duanebromfield8602 The printer that built this house is very good. What are you looking to print?

@scottmichael2004 3 жыл бұрын

Any info on insulation and energy use? Sure, a concrete wall is great thermal mass, but solid from the interior to the exterior is major thermal bridge! (Not an engineer or architect, just a fan of innovative and green design✌️)

@garyjohnson1050 3 жыл бұрын

Looks very promising. My question is what happens if you have a problem in the walls, like a pipe leaking?

@automateconstruction 3 жыл бұрын

You can cut in if need be the printed parts of the wall aren’t structural anyway.

@irkiIIer 3 жыл бұрын

the hallway size is very conservative that a norm in europe i recon

@Gromic2k 3 жыл бұрын

8:32 six centimeters sick? Poor concrete

@carlwatts1230 3 жыл бұрын

Familiar with Apis Cor? They have a highly portable printer (meaning a large pickup truck could be use to transport it) They printed a small house a couple of years ago in about 2 days if i recall correctly.

@automateconstruction 3 жыл бұрын

Yes I’ve met with their founders on multiple occasions.

@TheRaviShanghavi 3 жыл бұрын

How is insulation handled? I am interested in switching our stick frame to 3d printed construction.

@bayan6325 3 жыл бұрын

Amazing video Jarett...please let me know if they experienced any safety issues on site? Also i recommend you visit the Dubai Expo 2020 site as they have a full pavillion dedicated to 3d printing from October 2021- Feburuay 2022

@automateconstruction 3 жыл бұрын

I’m planning on visiting Dubai in August, I don’t know of any safety issues experienced.

@kendallnavstar 3 жыл бұрын

*I WOULD LOVE TO BRING THIS TO AMERICA BUT I DON'T KNOW HOW TO START. I WOULD APPRECIATE ANY HELP I CAN GET ON THIS.*

@automateconstruction 3 жыл бұрын

What do you want to build and where?

@kendallnavstar 3 жыл бұрын

@@automateconstruction *SINCE I DON'T HAVE THE SLIGHTEST IDEA HOW TO BUILD ANYTHING I DON'T THINK I WANT TO GO BROKE TRYING TO RUN A BUSINESS LIKE THIS MYSELF BUT I DO THINK MONEY CAN BE MADE IN MY AREA OF MISSISSIPPI AND WOULD LIKE TO BE A SILENT PARTNER IN THIS.*

@just..someone 3 жыл бұрын

@@automateconstruction i just love that you want to be a silent partner and constantly write all caps

@markjhermen 3 жыл бұрын

I know you mentioned the lack of air bubbles, but additionally, what makes this the most innovative house you've toured? How does it compare to the house that will be for sale in New Jersey, or the Printed Farms build in FL, or houses from Icon in TX? I can see your excitement on the tour. Trying to match that with what looks like other COBOD builds you've shared. Maybe I'm missing something? Size, 2 stories, speed, cost? What made you so excited for this build? Also, there was no mention of cost or time to complete. A little more opinion or summary from you would be appreciated.

@automateconstruction 3 жыл бұрын

Thanks!

@markjhermen 3 жыл бұрын

@J M You are correct, he does mention all of those things. Guess I was just hoping for more specifics. We never heard the square footage, time to build, cost, or what the innovative design elements were. Perhaps in the follow up for the finished project, he can highlight more of those specifics. Really appreciate the content.

@SylvieLooks Жыл бұрын

Oh, great. I assume that this type of construction would be cheaper than traditional construction. Or that houses can be built quickly for people who live very poorly. I'm from Argentina, journalist. I would like to have some photos of the machine. Where or to whom do I write?

@automateconstruction Жыл бұрын

You assume wrong unfortunately. I haven’t seen any compelling evidence that 3dcp makes construction cheaper.

@SylvieLooks Жыл бұрын

@@automateconstruction Oh what a pity It would have been a hope for the construction of houses for so many poor people who in my country live in very, very precarious houses.

@ErwinSniedzins 3 жыл бұрын

We are trying to build affordable housing and as the technology and techniques become more refined 3D concrete printers will become more affordable which will help NGOs to build 30% or cheaper houses for the homeless and financially challenged. This is our goal for Ontario and Canada

@abdulrahmaan1355 3 жыл бұрын

Will it be beneficial doing M.Sc. Construction and Robotics from RWTH Acchen University , Germany?

@automateconstruction 3 жыл бұрын

Certainly

@kenmcdougal97 3 жыл бұрын

I just want a 4 car garage 12 foot high with a full bath How much $

@automateconstruction 3 жыл бұрын

Where?

@darinbasile6754 3 жыл бұрын

What about the acoustics though? So much slap back in a concrete structure.

@automateconstruction 3 жыл бұрын

Some curtains and carpet would improve that dramatically. Pretty much any flooring would actually help.

@darinbasile6754 3 жыл бұрын

@@automateconstruction yeah, that makes sense. Thanks.

@darinbasile6754 3 жыл бұрын

@@automateconstruction And if you have any insight into Apis Cor’s system, would love to see it. Thanks again!

@ErwinSniedzins 3 жыл бұрын

The big concern now is getting governments and especially local permit departments on board to approve 3D printing in Canada. I hope it does not take 1 year to make it happen.

@williamhuang5329 3 жыл бұрын

Hanzhen harmonic drive gear , industrial robot arm gear reducer, factory automation joint gear

@HDTube101 3 жыл бұрын

Every house should come with ugly layers lines..lol

@thutchaipuengsupa5665 2 жыл бұрын

Love the video, I have a quick question where is the load-bearing part? I don't see a colume so I would assume the printed wall is a load-bearing one. Is that correct?

@automateconstruction 2 жыл бұрын

There are vertical columns with poured concrete which are the load bearing elements of the structure.

@thutchaipuengsupa5665 2 жыл бұрын

@@automateconstruction thank you very much

@thutchaipuengsupa5665 2 жыл бұрын

@@automateconstruction Are these columns the one mentioned at about 8th minutes, that they are actually not required, but they are for getting an approval from the regelator?

@automateconstruction 2 жыл бұрын

@@thutchaipuengsupa5665 Yes, it is a bit misleading to say they aren't required. There would need to be extensive testing and documentation of the compressive and tensile strength before I could confirm that to be factual.

@thutchaipuengsupa5665 2 жыл бұрын

@@automateconstruction Thank you bery much, that helps a lot with my understanding.