Toyota 4Runner • A-pillar Grab Handle easy Install/ Step by Step Modification

Рет қаралды 6,536

Күн бұрын

• UPDATE (12/14/2023) •
Due to the poor quality and fitment of this aftermarket pillar trim piece,
I personally wouldn’t recommend it.
It has since been removed until the company decides to improve it.
-----------------
In today’s video I show you how to install Step-by-step the A-Pillars Grab Handle on your 5th Gen 4Runner by KTJO.
And still In Pursuit of the perfect OEM Spec!!
Read First:
trail4runner.com/2022/09/27/k...
Where to buy it:
www.ktjo4x4.com/collections/t...
This Video was NOT sponsored by KTJO
Vikings Garage Patch and Stickers
vikingsgarage.etsy.com
As always, I appreciate your continuous Support!!Thank you for Watching!!
#trdoffroad #toyota #trdpro #letsgoplaces #toyota4runner #4runnersdaily #4runnertrdoffroad #trd #offroad #4x4 #diy ##4runnermod

Пікірлер: 72

@Treetopflyer777 7 ай бұрын

The OEM piece didn’t have that bottom bolt. I wonder if that second bolt would interfere with airbag deployment? The fit and finish, and the uncertainty of airbag deployment makes this one a pass for me. But thanks for taking the time to put the video out! Great content as always 👍🏻 Ps if you end up removing it, can you edit the video to reduce the rating out of 10? An eight out of 10 might convince people to buy it when it really is a 4/10 after sleeping on it. Lol

@VikingsGarage 7 ай бұрын

My very good friend, you know me to well. Because of all those reasons and then Some, not only will I be updating that score In The description but it’s literally getting removed over the weekend. I still posted the video mainly to help other install it or perhaps not waste their money like I have. As always I appreciate your input!! (It’s most definitely a 4 as far as overall quality is concerned, poorly executed… not to mention it’s potentially going to affect the air bag operation. NOT GOOD)

@barrywiseman7012 6 ай бұрын

@Treeetopflyer. Actually, as I mentioned below, the Toyota 4Runner Forum had several posts of adding the Lexus 460GX OEM part to a 2020 4Runner. If I'm not mistaken in those posts, when they removed the driver's side trim piece to expose the holes, the top hole had the bolt in place (not connected to anything), There was a drilled bottom hole, but had no bolt installed. Either the OEM replacement came with a bolt for the bottom hole, or he got the appropriate bolt from Toyota or Lexus. He added it with no gaps perfectly done. I remember he commented about the outrageous price of the handle though. It may have been $130 or so. But you could always go on the 4Runner forum & search out this mod. Probably posted around Jan 2020

@Treetopflyer777 6 ай бұрын

@@barrywiseman7012interesting. Thanks for the info I’m wondering if maybe something changed on the 4R. Something we’re unaware of. Maybe updated or changed airbag that would preclude them from putting it on standard. I find often there’s a good reason for things even if they don’t seem obvious. 🤷🏻‍♂️

@VikingsGarage 6 ай бұрын

@Treetopflyer777 💯

@hahaitsjeff 7 ай бұрын

They should have came standard with the 4Runners, I got mine installed last week. Pretty easy to install.

@VikingsGarage 7 ай бұрын

I do agree!! Strange they didn’t include it.

@munday 7 ай бұрын

Sometimes I just dont understand it too. They came standard on the 07-13 tundra than they took it away on the 14-21 tundra.

@Jojo-ni2cg 7 ай бұрын

thanks viking-cool info!!

@VikingsGarage 7 ай бұрын

🤘🏻

@Mike-cu6gk 3 ай бұрын

Thank you for the video. I wasn’t sure how to use the tool and you’re the only one that actually showed the “how too” I installed the grab handle in my 2023 Tacoma everybody else was saying it was a nightmare. It was super easy I used a magnet on the screwdriver shank to hold the screw on the tip and used the top of my head to push the panel towards the windshield 😂. I was done in 27 minutes, that’s right I put the stopwatch on my phone haha

@VikingsGarage 3 ай бұрын

👏🏻👏🏻 It wasn’t all that bad right. 27 minutes isn’t bad at all

@Mike-cu6gk 3 ай бұрын

@@VikingsGarage thanks to you my guy.

@woodyx10 7 ай бұрын

man you were cracking me up in this video

@VikingsGarage 7 ай бұрын

😅🤘🏻

@ChiTown-Zal 6 ай бұрын

I put the grab handle on my '23 TRD Off Road Prem. Top bolt was a breeze, but after trying to find that bottom screw hole for almost half an hour, I took a 5 min. break. Then got it on the second try. Enjoy your videos. Getting lots of ideas for my new '23 4R.

@VikingsGarage 6 ай бұрын

That bottom bolt 🤬 That’s freaking awesome, enjoy!!

@Pozzer528 4 ай бұрын

Great video. I saw your review that you wrote to the company, so went look for this video right away. That for making the mistake so I don't have to.

@VikingsGarage 4 ай бұрын

I’m always glad to help.

@barrywiseman7012 6 ай бұрын

@Vikinggarage. About 2 yrs ago I saw a video using Lexus GX460 driver side handle installed on a 2020 4 Runner (same interior A pillar colour, OEM Lexus part). I believe it worked perfectly, matched colour, no gap. I believe several posts on this mod were on the Toyota 4Runner Forum site. As someone here mentioned, this part used to be on 4Runners in the past. Probably a cost saving decision; there were some comments then that it may have caused a visual blockage, but I feel if that was the case, they would have removed it from the Lexus I would think

@VikingsGarage 6 ай бұрын

If this is true I would love to know what the actual part number is. I do thank you for sharing that. There are folks Out there that really need this handle to aid them. So for them, we need a better solution then what this company is currently offering.

@ironmike92 7 ай бұрын

Installed this on my 4runner in the summer, i agree bottom gap bothers me as well but i force myself to look the other way lol. I didnt use rivet as ive seen forums where ppl complain it loosens over time... i used a small piece of scrap steel, bolted it over the hole and drilled a hole thru scrap steel and tapped it - 10-28 screw. Bigger bolt more secure for sure!

@VikingsGarage 7 ай бұрын

Very interesting method, didn’t even think of that. Thank you for sharing!! (I don’t know how much longer I’m going to look the other way 🤣, knowing myself… it’s probably coming back out soon)

@OGLewbaby 7 ай бұрын

My short self needs on of these...... LOL

@VikingsGarage 7 ай бұрын

Nah, I’m sure you’re not that short. 😅

@mtnbike099 7 ай бұрын

I just picked up a 23 4Runner and coming from driving a 04 I really miss the grab handle. However the gap is a concern maybe a 2nd release will come out in the future and with the tab removed. Excellent and very informative video! Any chance on doing a video on the RAV 4 side mirror replacement for the 4Runners so we can enjoy the blind spot mirror thats part of the mirror. I have heated mirrors and blind spot monitors as I’m sure your new 4Runner does, maybe a good segment for your next mod if it’s possible.

@VikingsGarage 7 ай бұрын

I have covered the RAV4 mirror one, I’ll have to find the link for you. 👍🏻 I appreciate your input and your support!!

@mtnbike099 7 ай бұрын

Awesome yes please link me when you find it. I didnt know and haven't run across it in your playlist yet. Thanks!@@VikingsGarage

@emilyn9324 6 ай бұрын

Grrrrrreat! Just received it in the mail. Let’s see if they accept returns and how much I wasted with restocking and shipping fees if they do. 😞

@VikingsGarage 6 ай бұрын

I’m sorry, I feel your pain. To add insult to injury not only did they start ignoring my emails but also, removed my right to leave a review. Complete total waste of money and time. AVOID

@pall5114 7 ай бұрын

Thanks for the video, definitely considering this, drives me crazy that Toyota didn't include the driver-side handle when other Toyota models have them. The question is does this void a new car warranty and does it in any way affect the airbag deployment.

@VikingsGarage 7 ай бұрын

Unfortunately we don’t have the proper testing to confirm the airbag deployment. As far as warranty, won’t void it, but they sure look for any reason to do so 🤷🏼‍♂️

@love4steel 6 ай бұрын

Hey I know you were trying to get miso door handle covers awhile ago.. I just got a notification that they are in stock again

@VikingsGarage 6 ай бұрын

I appreciate that!! I’ve actually ended up getting some. Thank you!

@douglasgray2620 6 ай бұрын

Learning a lot from you! I was wondering if you couod answer 2 questions please. Or tell me where i coukd find them? I am in the process of buying a very nice 2021 4runner tro premium. Like it a lot but i cannot get the remote start to work. Videos i have watched say 2020 and later have it and its theu the lock button on the fob. Press 3 times with last one for 3 sec. What is true? Second when i start from a stop wht does it have no pep? I have to romp in the accelerator to get it moving. Is that the way they are? For mist of my lige i havecbeen a jeep guy.,

@VikingsGarage 6 ай бұрын

No remote start on yours, only TRD pro or limited. The pedal feel is perfectly normal 4Runner characteristic.

@2-old-Forthischet 7 ай бұрын

I really don't think about these things so I paused your video to look at my 2003 Limited 4Runner and discovered it has a factory pillar handle on the driver's side.

@VikingsGarage 7 ай бұрын

Isn’t that wild 😉.

@bobblack1132 7 ай бұрын

Where does that handle go if the airbag deploys? I thought the reason why Toyota didn't have a grab handle there was because of the airbag. It does look cool however, I usually grab the steering wheel when I get in but a grab handle would be much better!

@VikingsGarage 7 ай бұрын

I’m right there with you, hence my disclaimer at the end. I can’t say with certainty but when you remove the A-pillar on the opposite side the air bag is routed exactly the same as the drivers side, so technically it should work but without proper testing I’m merely speculating. 🤷🏼‍♂️

@richardstone5241 7 ай бұрын

Wow! I used to build off-road vehicles from street queens to serious rock crawling and I DO NOT recommend the use of K&N Air Filters. They DO NOT, in my opinion, filter the air good enough!

@VikingsGarage 7 ай бұрын

Believe me, I am actively trying to find the stock air box for this thing. I bought the car with that monstrosity already in there. I agree with you Sir, very little filtration going on.

@MartinezFAMHawaii 4 ай бұрын

Nice ..is this fit 2013 4Runner?

@VikingsGarage 3 ай бұрын

It should. 🤘🏻

@ammartaqi87 3 ай бұрын

How I can I get one to baghdad

@Cylon333 Ай бұрын

Do you also work in the tv series on Netflix called Warrior?😅 you look like one of the main characters 😂 not offense

@VikingsGarage Ай бұрын

No offense taken, I’ll take that as a compliment

@toddcraft6919 7 ай бұрын

Vikings Garage do you find it’s in your way for your line of sight out the windshield?

@VikingsGarage 7 ай бұрын

excellent question, it’s only in the line of sight if focusing on it. You got used to it. it’s not bad.

@jeffmclinn3168 7 ай бұрын

Do you think the bottom fitment could be molded out a little bit with the use of a heat gun? Obviously before final installation?

@VikingsGarage 7 ай бұрын

It’s very possible, I didn’t even think of trying… honestly at this point I can’t loose. The tip portion of the panel already looks awful

@WilfredCruz 7 ай бұрын

Nice video. They should fix the fitment issue and add the SRS. I'm a little concern about the functioning of the airbag. I would need to look at the joint closely.

@VikingsGarage 7 ай бұрын

I’m right there with you. Honestly it’s gotten really cold this past few days and the bottom gap is even more noticeable. I’m taking it off, most likely, I’m too OCD to ignore that

@WilfredCruz 7 ай бұрын

@@VikingsGarage I know you are. I would remove it also.

@amirchar 7 ай бұрын

Is the airbag still supposed to be functional?

@VikingsGarage 7 ай бұрын

I can all certainly hope so. That being a small company, proper testing was not performed. 🤷🏼‍♂️

@collinosborne4478 7 ай бұрын

@@VikingsGaragehey could I buy it from you then? I need a grab handle!

@OSAbsolam 4 ай бұрын

Hmmm I would like to add this to the Passenger side. But I just don't like the look and fit.

@VikingsGarage 4 ай бұрын

If you’re referring to your 4Runner, it does come stock with that pillar handle.

@Johnnydammit 7 ай бұрын

Would the nutsert instead of that anchor be better?

@VikingsGarage 7 ай бұрын

Honestly anything is better then what was sent to me 🤣🤣

@4Runner21 6 ай бұрын

I wish the 5th gen had these grab handles for the second row ?

@VikingsGarage 6 ай бұрын

Absolutely! There’s a few options out there to install handles where the front seat headrest goes.

@Johnnydammit 7 ай бұрын

Can't find the hole? Put some hair on it!😂

@VikingsGarage 7 ай бұрын

Send it!! 💨😅

@36allisona 7 ай бұрын

Such a Bummer that your cover got damaged during installation, seems like a flaw in the design 🤷🏼‍♀️

@VikingsGarage 7 ай бұрын

100 agreed