No video
Toyota Corolla EE90 2E Modified Head 0-100 Pulls
Рет қаралды 16,425
Күн бұрынPlease Subscribe, Like and Share Thanks
here's a link to my 2E/3E Facebook group / 3467573979944424
In this video, we do a few 0-100 launches and pulls the engine specs are a stock bottom end with a modded head with a 266 cam and performance valve springs with a home-job port-match thanks for watching.
all videos filmed on a private road
@ivanbarton4475 Жыл бұрын
I'm impressed on how high it revs.
@RuggedGarage 7 ай бұрын
thanks mate
@sergiynikulin2367 Жыл бұрын
15 years ago I had the same 1987 Corolla with 2E. A very cool car. handling like a kart. The quality of workmanship is at the level of modern cars. Such as vw golf, opel kadett and other classmates are rubbish compared to EE90. My most favorite car
@NekoCattoo 4 ай бұрын
the sounds dang!
@hddbc5787 Жыл бұрын
now it just needs some close ratio gears
@mohammednazeel3838 2 жыл бұрын
Sounds mean ...Great job mate
@RuggedGarage 2 жыл бұрын
Thanks 👍
@thymiosmantzaras7618 2 жыл бұрын
I need to modify my head to! ASAP!
@RuggedGarage 2 жыл бұрын
yea man defiantly worth the money
@calonyoutuber1399 2 жыл бұрын
My car was ee90 as well, but it have a trunk, the enggine and the front half are the exactly same, where do you live btw.. keep making the video pliss .. im not a good mechanic and have so litlle expirience and knowledge, so thank you for sharing 👍
@RuggedGarage Жыл бұрын
Yea yours will be a lift back ee90 I'm from new Zealand more vids will coming soon
@50cal974 Жыл бұрын
Do you know by anychance if they 4age c52/c56 would fit on the 2e engine? Thanks
@FuraiFuru 11 ай бұрын
same question here
@paddyladdd9395 9 ай бұрын
It will fit if u change bellhousing
@jeraldcanlas2492 Жыл бұрын
dang 4 gears awd drive thats fast
@RuggedGarage Жыл бұрын
this is a 5 speed fwd thanks
@shaunphillips4544 Жыл бұрын
Hello i need help with my 1986 corolla ive restored im having trouble with my carburetor
@RuggedGarage 7 ай бұрын
stock carbs are painful i don't really do much with them
@andrewdorasamy2832 2 жыл бұрын
Any idea what power /torque it's making at the wheel? What's mods are on it?
@RuggedGarage 2 жыл бұрын
not sure on power figures but it defiantly feels faster than a stock 2e mods are cleaned and rebuild head with a 266 regrind camshaft performance valve springs and a diy port and polished head
@kaiserdgreat 2 жыл бұрын
Hi mate, what size would you recommend for exhaust piping of stock setup of 2E engine. Thanks!
@RuggedGarage Жыл бұрын
2 inch for a performance engine and 1.75 for stock but use a resonator to decrease the drone
@holitic7535 Жыл бұрын
What did you modify exacrly ..the intake ?
@RuggedGarage 7 ай бұрын
i completely rebuild the head upgrade valve springs 266 cam and a custom port and polish that it done
@goranpavlovic9051 2 жыл бұрын
Are you planing to repaint/restore the car to some degree..?
@RuggedGarage 2 жыл бұрын
yes i have got all my bolt zinced and also my parts power coated and i have fully sanded the car down
@LakeShow2022 Жыл бұрын
Whats the highest mileage it can go the car
@RuggedGarage 7 ай бұрын
ive seen the stock with 500,000 kms on them depends on how you treat them
@pbloxDDx Жыл бұрын
What spark plug used and wire? Good job boss.
@RuggedGarage Жыл бұрын
repco spark plug wires and ngk plugs only
@holitic7535 Жыл бұрын
Where you can purchase this head
@RuggedGarage 7 ай бұрын
i made this head custom cant buy them you have to make it
@earljuliuslorenzo1899 2 жыл бұрын
2e clutch plate,pressure plate and release bearing can it fit to 3e engine?
@RuggedGarage Жыл бұрын
Not too sure I'll check when I start building my 3e engine
@serebbi 9 ай бұрын
How many HPs is your corolla right now ?
@RuggedGarage 7 ай бұрын
no sure but i would guess around 80-90hp to the wheels never been on a dyno feels alot better than a stock one for sure
@abrar_lowdamn 7 ай бұрын
You got some clutch plate problem
@RuggedGarage 7 ай бұрын
when i brought it the clutch needed to be changed that was 2 year ago 🤣🤣
@byTurBoHD 2 жыл бұрын
how you did that bro?
@RuggedGarage 2 жыл бұрын
cleaned and rebuild head with a 266 regrind camshaft performance valve springs and a diy port and polished head. It rips hard for a 1.3
@Ganjatraining 2 жыл бұрын
Wondering if I could do something similar with my 1E. About how much did it cost to get yours to this point?
@Ganjatraining 2 жыл бұрын
nvm, saw your comment on another video. 570NZD is about €350 which is quite cheap. Love your car man
@milkys3xy 2 жыл бұрын
hey I've got a 1e engine too do you have any ideas of any mods you could do to them?
@Ganjatraining 2 жыл бұрын
@@milkys3xy I've seen someone put old Honda CBR600 carbs on one, also probably a nice exhaust manifold for better flow & sound. Haven't tried anything myself yet though
@RuggedGarage Жыл бұрын
1e might cost a little bit more because not sure if the performance valve springs will work in it might have to get some custom made
@RuggedGarage Жыл бұрын
Get a cam regrind valve springs and do a diy port and polish add a Weber 26/28 and a Coby exhaust extractor. That should give it a good power boost.
@itzreza4547 Жыл бұрын
Which country
@RuggedGarage Жыл бұрын
New Zealand m8
@mustafakaranfil3163 2 жыл бұрын
damn this is 1.3
@RuggedGarage 2 жыл бұрын
yea man it rips hard i was quite surprised about how much of an improvement the new modified head is.
@mdshahidan1570 8 ай бұрын
Bering recing
奧特羅羅 Ultraman
Рет қаралды 6 МЛН