Here/s a tip that several videos I've watched have missed. When doing the low beam bulb on the passenger side, before removing the dust cap you first press those 2 small tabs where the windshield wash filler tube connects to the body and lift the tube up slightly so you can move the filler tube to the side for easier access to the dust cover. That's actually why the filler tub neck is " corrugated"| so it can be bent to the side. 'Also if the new LED seems a little hard to get into the "socket" for the bulb just remove the smaller thinner rubber gasket from the old halogen bulb and put that one in place of the one on the LED. It will still seal the inside of the headlight but being thinner it will fit into the :"mounting tab slots" in the housing a bit easier.
@DansWay Жыл бұрын
Thanks for the tips! I'll try that next time myself.
@Babyology1017 ай бұрын
Super helpful, thank you!
@jandmarycastaneda3276 Жыл бұрын
Thinking of replacing headlights and maybe convert to LED in the process. Appreciated the walkthrough to help get us in the right frame of mind. 👏
@DansWay Жыл бұрын
Glad I could help. Did you do this yet?
@scottrose5922 Жыл бұрын
Same here, I just watched this video. I'm changing them on my wife's Highlander tonight. Thank you
@DansWay Жыл бұрын
@@scottrose5922 let us know how it turns out!
@sharonp44462 жыл бұрын
We owned a 2012 Highlander, a very good auto. Thanks for your knowledge
@DansWay2 жыл бұрын
Hey Sharon, I appreciate the comment.
@KyryllHaponenko2 жыл бұрын
Thanks for the previous video. Loving my lights now
@DansWay2 жыл бұрын
Thanks for the feedback! Did you do both headlights and high-beams?
@digitopdeals1398 Жыл бұрын
Piece of friendly advice for anyone trying this: Make sure not to drop the moisture cap inside engine bay. I dropped the right side cap and had to remove panels underneath to recover that in 20 degrees cold in the dark of night.
@DansWay Жыл бұрын
Oh man! So sorry you went through that! In the process, did you notice how easy it would be to upgrade the fog lights? I have a video for that as well.
@digitopdeals1398 Жыл бұрын
@@DansWay Exactly. I should have been ready with the fog lights upgrade. I was right in there.. :)
@curiositycurator173 ай бұрын
Great vid. Is it safe to touch the halogen bulb with nitrile gloves? Vinyl gloves?
@jdogtag5674 ай бұрын
This was a couple years ago. How did these lights work out for you?
@DansWay4 ай бұрын
Still going strong! No problems, and I continue to recommend Auxito for all my upgrades, family and friends.
@jdogtag5674 ай бұрын
@@DansWay thank you for the update!
@jimmyalguera74282 күн бұрын
do these bulbs need a conversion kit? or are they straight forward swap?
@DansWayКүн бұрын
These are direct swap. Nothing else required.
@rokimanful Жыл бұрын
could you please also provide your feedback on the fan noise level? Is it noticeable when A/C was not on? Also, because it seemed that the moisture cap did not completely seal the unit, there is a possibly dust and water could go into the unit and decrease it's life span.
@DansWay Жыл бұрын
I really can't hear the fan when these are on and the car is running, they are really quiet tiny fans. I have not noticed any water getting inside due to the cap not closing completely. The gasket is still sealing the opening, so unless I submerge the truck, they shouldn't get much moisture all the way up there inside the hood.
@akhl7195 Жыл бұрын
got it, and thank you, i just bought for my highlander 2019, my lasfit is broke,but lasfit was perfect for highlander but is expensive why i bought this led h11, so we will see how long can work this led light, lasfit worked around 1 year
@DansWay Жыл бұрын
Ah man, it should last longer than that... Warrantee on Auxito bulbs is 2-years if you purchase from their website. Not sure if you purchase from Amazon...
@jeffabug8397Ай бұрын
Have a question, I bought led lights, but it's a bit longer and wider therefore I cannot put the cap back on, what do I do in that situation?
@DansWayАй бұрын
That’s a tough one. You could cut out the back just enough to allow it to stick out, but you don’t want dust/debris/bugs getting into the lense body showing up inside.
@vhtx946326 күн бұрын
@@DansWayJust FYI @AUXITOLED posted this exact video on their channel, not sure if you gave them permission to do so. I noticed a few other reviewers posted on their channel as well. kzfaq.info/get/bejne/fdh1nbKArrSpk6M.html
@princegorman2979 Жыл бұрын
You need to install rear bumper fog lights too
@natesmith51282 жыл бұрын
I wish showed us how the Daytime running lights look like. I hope not like candle light anymore😀
@DansWay2 жыл бұрын
I don’t see flicker when looking directly at the lights, but looking away you see a flicker. I like that this attracts attention which is the whole point of DRL. Looses some minor style points but it is ultimately safer to be noticed.
@stuartkurtz85134 ай бұрын
agreed...daytime running lights don't need to be bright, but it is annoying that they look "old" & yellow.
@marcotedeschi20462 жыл бұрын
I purchased the AUXITO LED whole package. How do you resolve rapid turn signal blinking for the 2019 Toyota Highlander?
@DansWay2 жыл бұрын
On the driver side I had to install the resistors they can provide. Sorry that wasn't made clear in my turn-signal video.
@cawv98 Жыл бұрын
how do replace the 2022 toyota highlander xle headlight bulb?
@DansWay Жыл бұрын
I'll have to investigate that model year. Does it look significantly different than my 2017 on the inside of the headlight assembly?
@marcotedeschi20462 жыл бұрын
I installed the AUXITOLED whole package on my 2019 Toyota Highlander. How do I resolve the rapid turn signal blinking??
@apostolllos2 жыл бұрын
I really like your channel, keep it up
@DansWay2 жыл бұрын
Hey Thanks man!
@sirseacow4462 Жыл бұрын
I have a 22 highlander platinum the headlights move side to side when turning the steering wheel, I'm not sure if I could I use a different bulb or would I need to get something special?
@DansWay Жыл бұрын
I honestly have no idea... If you check the Auxito website they might offer a part based on your year/make/model
@whoispradeep Жыл бұрын
Mine is 2008 highlander and looks quite differnt from yours.
@joedunne94922 жыл бұрын
Since switching to these led headlights is technically illegal in the states do you get harassed by the police or at yearly safety inspection?
@JDrwal22 жыл бұрын
Do that in the 2022 model!
@DansWay2 жыл бұрын
Is the 2022 really different?
@JDrwal22 жыл бұрын
@@DansWay Totaly different. Try to find out how to do it in the 2022 model. Good luck. It’s either permanently sealed and requires special tools, or the entire headlamp needs to be replaced, which would suck, and it would be a turn-off for me. The manual says: replacing the low/high bulb must be done by your dealer. After 3 days of searching I gave up. If you find any info on that, I’d appreciate the link. Also… can’t find how many lumens the low/highs give out. I called Toyota - they did not know. Can you believe it????
@bittertruth201 Жыл бұрын
question is this light heats-up please give your reviews
@DansWay Жыл бұрын
It does get warm, but the fan keeps it cool enough to last.
@curiositycurator173 ай бұрын
Great vid. Is it safe to touch the halogen bulb with nitrile gloves? Vinyl gloves?
@curiositycurator173 ай бұрын
Great vid. Is it safe to touch the halogen bulb with nitrile gloves?
@curiositycurator173 ай бұрын
Great vid. Is it safe to touch the halogen bulb with nitrile gloves? Vinyl gloves?
@curiositycurator173 ай бұрын
Great vid. Is it safe to touch the halogen bulb with nitrile gloves?
@curiositycurator173 ай бұрын
Great vid. Is it safe to touch the halogen bulb with nitrile gloves?