I use a cheap chinesium dc/dc converter. The variable voltage goes in and constant out. 10a-12v to 80v in and adjustable 36v to 120v out. Only the amp's varies now and my grid-inverter runs longer and starts earlier by low winds.

Keep up the great educational vids very interesting.try 6 volt golf cart batteries there deep recycle they last longer.

Thanks for sharing, I am setting up a 24 volt system with solar. What I want to know, what can I set up using a VAWT to use more as a trickle charger to maintain my batteries during the night and on cloudy days?

Hello, if I may allow myself to tell you that I also connected everything as you did but however I eliminated the relays I go directly with the dry contact to the inverter switch🙏

your a legend bro

Great Set ~ Up ! Love the way U presented it ! I’ve created a self-sufficient power supply ! “ It’s Mind~Bending Out/Of The Box workable ! But you need to be able to improvise with electronics and use pieces which would not be used for what you doing , but will Work ! A Car Alternator originally create Ac Current and it swaps the Ac Current into Dc , U following me ? Good I know you are , I’m a Gm man you can investigate which alternator is easier to convert over I thinks it’s a Jeep Alternator from around 1986 it’s high Amp at low turn / Low R.P.M for peak Amps , but here’s the thing you’re not going through the output on the alternator because the power has already been converted to DC you have to on the alternator when you takeoff the back cover the cage if the copper winding which goes around the inner part of the case on most alternative this three terminal leads which come on from the copper wire winding Ford has a Ford Master escape 150 amp alternator with five copper leads coming off what I understand every wire that comes off is another phase ! You use Romax wire because I had my voltmeter on one of my GM alternator AC current I recorded 1100 W that’s One Kw & 100 W’s now the amperage I have not checked , I’ve heard the Current is 115v @ 90A but I am not able to confirm that ! No I’m not you , you have 3 Alternators all powered by Dc motors with the speed controllers to dial in the proper RPM to get the Highest Volts & Amps my big block Chevy alternator low turn is about 2,000 rpm I’m hitting the 115v at 1,100 W = 1 W = 1,000W + the 100W you know you’re house conservatively used maybe what 500 hour ! I charge my battery banks 48v my Daily BMS ‘s are 48v 120A , I use a separate breaker box , I wire over all the main electricity pieces I will want to power if the grid goes down Kitchen, furnace, sump pump and a few bedrooms but running low - To ~ No Electricity , Solar panels & Wind Turbines charge controller to keep the battery banks full Lithium 3.2v 280Ah 2 48v Banks ! Great set~Up !

Can I get your link to those relay viltage switches please

You have a blue and yellow wire going into the controller. Where do they connect? And where do they go? Also the blue and yellow wire on the top of the relay...what screws are they on in the controller? Thanks Curious on how you connect the cicuits.

I have some of those inverters too, I keep them in the shed away from the house too. I don't trust them!! LOL

Any issues on the output or AC side of those inverters? Power Co non the wiser ? No issues with the KW hour meter?

Hello. I screwed the inverter to the aluminum plate. The heat from the inverter dissipates perfectly.

If your wind turbines are 3 phase A/C you can buy a similar grid tied (cheap chinese ) inverter ( I have one)which allows a 3 P AC input and a GT/Mains connection + a DC Dump load output (could be Bt bank) etc. Can make a more simple setup. NB bit tricky finding the inverter supplier. the DC input ones which Do NOT seem to oftent like a Batt bank input over a PV cell input I have a lot of Dead inverters also re Direct Batt connection onliy

Ha so you charge a 48v bank but split it and discharge it as a 24v, I thought about doing this but had no idea if it would damage the battery bank if some drained faster than others, very interesting. the problem I found when using a grid tie off a battery was the battery voltage restricted the amount of wattage the inverter could pull, if i remember mine was 37w when the battery was at 28v and as the battery drained it went down to something like 28-30w. the inverter I tried this with was a 1000w wind turbine grid tie with input voltage of 22-60v.

I’m trying to run solar and a wind turbine together on a 24v system! solar is great until winter time that’s why I’m trying to run a wind turbine together as a power top up any suggestions would’ve greatly appreciated on how to do this the easiest way, I’m storing the power to run lights at night.

I am extremely jealous of your setup, but it did make me wonder two things: 1. is there any contraption you could build/buy instead of a bridge rectifier? They have a max efficiency of 81.2% right? So aren't you losing a fair chunk of the power you produce? 2. Could you get several GTI's, parallel them (or use a relay to move higher voltages), and have each with a higher voltage input range and thus be able to handle the full Voc from even the heli?

I installed on my Windturbine several PWM Limiter. The Turbine can't exeed a specific voltage. Works great but in high Winds i don't get the full Power cause the PWM Limiter kills the Turbines speed^^ but it is cheap way 😅

Can you post links for the relays and Chinese controllers?

Can I conect to the Solar Grid a wind enery system like wind generator ?

Do you have links of where to buy these items?

why dont you use 36 volts, for all the setup, all the wind turbines? the inverters will work nice , for sure

JUst wondering what happens when the electricity goes out and the inverter wont send electricity to the grid. Where does the electricity go?

We can make a sworn contract if you help me but I can't give you any information about the invention I can only tell you that it is about force with perpetual gravity and electrical systems

I am an inventor, artist and engineer in systems, I have an invention that I would like to make in the United States, so I want to know if you are interested in working with my invention, we can make a spoken contract, but I cannot mention anything about the invention before it is registered.

Those are crap inverters to start off with 😂

Hi buddy i am from South Africa a friend need a wind turbine connected to his Solar batteries 12 kw Lithium batteries with grid tie inverter it do not produce enough power when it rains he also got a Victron charge controller. His solar system is also 12 kw. I can help him with a 48 volt wind turbine 1500 - 2000 watt i can put a 150 Amp rectifier in then from there i need guidance i can see in your videos you upset a lot of solar companies that think we cant connect Inverters to a wind turbine. if i can buy a good relay for him and a good inverter what will your advice be. He dont have money to buy expensive batteries and it wont charge in a week of bad weather. Please help tell me what to do save his system he is also from the grid. You do very good buddy like your ideas that few will try. We have to survive.