Nathan at Kenton Equipment, Northern Kentuckys Premier 5-Paw Kioti Dealer and Cub Cadet Elite Dealer, going over the Trailblazer TB Max front loader mounted hydraulic rotary cutter setup and prep for a Kioti Tractor.
Пікірлер: 16
@stephentucker3837 Жыл бұрын
Keep filming. You are a 5star teacher
@shanegriffith78382 жыл бұрын
Look forward to using this on the dk4210se.
@silverrussell19782 жыл бұрын
What size hydraulic lines are you running? I have the TB-1 and the power pack. I recommend flat face couplings. I use it on a CK2610. I also have the RX7320 which is plumbed for it with sump return. It is pretty amazing how much clearing you can get done with it.
@kentonequipment46872 жыл бұрын
These need 5/8id lines mated to 1/2 couplers. It's a little weird, but it's what they suggest!
@user-eh9uy3cr2p Жыл бұрын
The tractor in the video looks like the loader is racked. I’ve heard stories of the loader on the 2610 getting permanently torqued or racked having a offset implement. Run into this ever????
@silverrussell1978 Жыл бұрын
@@user-eh9uy3cr2p I don't run it offset so no issues with the loader. Only out front of the tractor. I mainly use it to get into the woods where I can't get my bigger tractor
@user-eh9uy3cr2p Жыл бұрын
@@silverrussell1978 gotcha. Appreciate the response!
@stubblejumper31252 жыл бұрын
With most of the weight on the one loader arm, especially when extended, wouldn't that cause issues?
@kentonequipment46872 жыл бұрын
It's definitely something to consider. The good thing is that the unit weighs less than 500lb, and the TB MAX JR is less than 400, so they're not as destructive as it might seem. On tractors smaller than the NX (2,700lb loader lift) we recommend the TB JR.
@Scott-cu4ol2 жыл бұрын
Interesting. i have the CK3510se. which model would fit?
@kentonequipment4687 Жыл бұрын
I'd put the TB Max JR on it. It's not nearly as cumbersome up in the air with the reduced weight.
@Scott-cu4ol Жыл бұрын
@@kentonequipment4687 Will the Junior run off the third function I have a little over 9 gallons per minute flow.
@kentonequipment4687 Жыл бұрын
@@Scott-cu4ol You have the GPM, but you DON'T want to use a 3rd function. That system tends to restrict flow over time and will create heat/backpressure, while also being inconvenient. If you're going to run it off the tractor, use the rear remote to send, and a sump drain to return. Even so it's right on the line of what these ask for hydraulic-wise. Ideally they get 11gpm.
@Scott-cu4ol Жыл бұрын
@@kentonequipment4687 Thank you that’s good info. My tractor is rated for 11.5 gallons per minute but when you take into account everything else I believe the true rating is around 9.6 GPM.
@paulkendrick6911 ай бұрын
I am the owner of a new Kioti RX7320 PC Tractor and I’m interested in purchasing Brush Hog mower how much?
@kentonequipment468711 ай бұрын
Hey, Paul. You should plan between $5k-$6k for a unit like this with all the hydraulic plumbing needed. Since the release of this video we've got even more options for units and hydraulic plumbing, so the cost may change depending on how fancy you want to get!