Transform Your Velotric Summit 1: Upgrade Guide

Рет қаралды 1,112

22 күн бұрын

Velotric Summit 1: alnk.to/3ybyrE8
Save $60 with "SCOTT60"
Are you looking to upgrade your Velotric Summit 1? I show you all the upgrades I have made to mine. Tell me what upgrades you are doing to yours!
MARZOCCHI BOMBER Z2 27.5 E-OPTIMIZED 140mm. $419
amzn.to/3XJCwne
Custom Marzocchi Bomber Z2 Decal - $41
tinyurl.com/bdf522y6
Maxxis Minion DHF - EXO, Dual Compound, Tubless Ready. $62 -Front
amzn.to/3XLmr0l
Tubless Presta Valve System 40mm - $14.99
amzn.to/4eKRAqH
Fifty-Fifty MTB Mudguard - $9.99
amzn.to/4cqFhhS
Wolf Tooth Anodized bling Kit - $34
amzn.to/3XJCwne
Hidden Conch Bicycle Bell - $16
amzn.to/3xD9Ce2
Trail One - Hells Gate Grips - $27
amzn.to/3zsWYyU
Fooker MTB Pedals - 3 bearings- $22.94
amzn.to/3VJwy3f
Maxxis Agressor 27.5x2.50WT. Dual, DD, Tubles Ready - $98.97 - Rear
amzn.to/3zxSdUs
Shimano altus rd-m730-SGS (9 Speed) - $30.92
tinyurl.com/5n8ma7sh
FoldyLock Compact Bike lock - $89.98
amzn.to/4czH8ka
Flatout - Sportsman Formula - $19.99
amzn.to/45U8P51
LINKS USED IN THE DESCRIPTION ARE AFFILIATE LINKS
By using the affiliate links I earn a small fee for your purchase, it does not cost you anything extra to use them. They help me to be able to create more videos for you. Thank you for the support!
velotric summit, velotric summit 1, velotric emtb,v elotric, velotric review, velotric mountain bike

Пікірлер: 22

@1fsttoy 14 күн бұрын

I added a rear view camera and screen to mine because I ride on the road mostly. Works very nice

@scotthardesty 14 күн бұрын

Nice. I've seen those. Where does the screen go?

@1fsttoy 14 күн бұрын

@@scotthardestyI put mine to the left of the normal display. It’s a 4.3” screen. It kinda takes up a lot of handlebar space

@corykayhoe1033 20 күн бұрын

Looks sick Scott!!!!🤙

@scotthardesty 20 күн бұрын

Thanks!

@tonygiancoli9626 18 күн бұрын

Scott, I've got a conundrum here. My new Cannondale Moterra Neo3 is in the shop with a warranty issue on my brakes, so they'll have my bike for 3-4 weeks & will be installing a new chain (a better one) after just over 100 miles. In the meantime, my wife has given clearance for me to get another bike, and I am deciding between the Summit and the Ramblas. The Ramblas, of course, has better components and is definitely more torquey. I could really feel how much torque it had in trail and boost. The Summit's motor is extremely quiet (Ramblas has a high-pitched whine), but, while it says it has 90nm torque, didn't "feel" near as torquey. I do, though, like that I wouldn't have to spend money on chains as much as the mid-drive, but I've really gotten used to mid-drive motors (2 of my bikes have them). This new (other) bike is more of a back-up for me, and will also be the bike that I loan out to friends when they say they don't have an e-bike or have another excuse. I rode them back-to-back, which was nice but also left me in a quandary. I'm torn, Scott. Any guidance here?

@scotthardesty 18 күн бұрын

If the main purpose of the bike is to put it on trails then I would go with the Ramblas. If your back up bike would be to ride around in the city and maybe some off roading now and again then the Summit would be my choice. Like you, I wanted an extra bike for friends to use but since I know that will be on single track, I purchased a 2nd Ramblas.

@tonygiancoli9626 17 күн бұрын

@@scotthardesty Thanks. I'm still torn. I'm going to ride both again today.

@scotthines5834 15 күн бұрын

@@tonygiancoli9626 I was considering selling my Summit 1 and getting a Ramblas. However I'm a little put off by reports of the noisy motor. If only there was a way of programming the motor for more power to the pedal assist on the Summit 1. The Summit 1 definitely has the power. And the motor is nice and quiet.

@scotthines5834 15 күн бұрын

@@tonygiancoli9626 I was also considering changing to a larger cassette for a lower gear to help with climbing with the summit 1. I'm not sure what that entails but it seems like something to consider.

@tonygiancoli9626 15 күн бұрын

@@scotthines5834 There is definitely a whine factor with the Ramblas. It's much louder than the Summit, but it's got a lot more torque (at least, it felt like it).

@0321ReconMan 16 күн бұрын

Hell ya so the rims can be setup for tubeless?!?! That’s great to know, also like the decals mine are red but I may get the orange decals looks way better! Nice job, looks good! Thanks for the video!

@scotthardesty 16 күн бұрын

I haven't put this bike under testing yet to see if the tubless setup will hold, but riding in the city it is no problem. I plan on getting this thing out on trails one more time to see if the tubless setup will hold.

@scotthines5834 16 күн бұрын

Great video. I've been riding my Summit 1 on steeper trails and I find that even in boost mode level 5 there are some trails I cannot get up without using the throttle. It seems like the motor has enough power but not in pedal assist. You have to use the throttle. Has that been anyone's experience?

@scotthardesty 15 күн бұрын

I think I have noticed that as well. when climbing, no matter what level you are on, the moment you hit that throttle, you can instantly feel more power.

@Sir_Dab 14 күн бұрын

Same here I am using the throttle a lot while riding technical sections uphill.

@scotthines5834 14 күн бұрын

@@Sir_Dab I prefer to not use the throttle so much and therefore have order a 40t chainring. It now has 44t. That should help. I took a couple of the links out of my chain. If that does not do the trick a new cassette with lower gears would probably do it. If I change the cassette with a higher tooth count, I'll probably have to add a few links to my chain.

@tomolryify 10 күн бұрын

Exactly. I like the bike but it currently has a problem with any significant hills. KZfaq search "Velotric Summit 1 Problems" for my experience. Velotric support has acknowledged and said they will address with a firmware update. We'll see. Others have complained about overheating on big hills. I'm in the process of updating the chainring and cassette - hopefully that will also help.

@scotthines5834 10 күн бұрын

@@tomolryify yes I have experience and overheating issue as well. I put on a 36 Tee chain ring and it helped a lot in climbing. I bought a new 11-40 cassette but I have been waiting to put it on. It would be easier to address the issue with the chainring. But at least it's good to know that the motor has adequate power. As you said it is either a firmware update and or a gearing issue.