No video

Transmission Cooler Install On 2020 Toyota Tundra

  Рет қаралды 75,831

NitroZ18 Fishing

NitroZ18 Fishing

Күн бұрын

step by step instructions on installing a transmission cooler on my 2020 Tundra Platinum, including how to check fluid level/temps...highly debated topic on why Toyota removed it from our trucks, this will keep your transmission temps much lower than stock...you can reach Nick at genuinecoolingsystems@gmail.com, or order directly from his website listed below
genuinecooling...
Veepeak OBD Module- amzn.to/35XfcXM
Fluid Pump- amzn.to/3ftaQLk
App used in this video is called OBD Fusion
***Don't forget to remove pin from thermostat after checking levels!!
Channel Partners/Discount Codes
xtrusion-overl... Code- NitroZ18
LASFIT lddy.no/qnhl Code- JUDGE10
ESP Truck Accessories- www.esptruck.co...
Discount Code- NitroZ18Fishing
carlinkitcarpl... Code- Z18
carpuride.com/... Code- Z18
screenprotech.... Code- Z18
www.tufskinz.com/ Code- Nitro10
cupgrip.com/?r...
Ultimate9 Throttle Controller- bit.ly/NZ18-evcX Code- NITROZ18
www.setpowerus... Code- NitroZ18Fishing
Cobra RAD 700i Radar Detector- shrsl.com/4g29d
blackbeardfire... Code- IFISH2248
www.YOLOtek.co... Code- NitroZ18
billettiedowns... Code- NitroZ18
www.shinearmor... Code- Judge20
versatrax.com/ Code- NitroZ18Fishing
coverado.com/?... Code- JUDGE10

Пікірлер: 479
@citytech7637
@citytech7637 3 жыл бұрын
I have been a Transmission mechanic for 30 years now and I sold coolers to all my customers could not believe Toyota eliminated the cooler on my 19 but it does say I have one on the window sticker maybe one day I will get reimbursed for installing a cooler on my Tundra Great video I watch all your videos
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thanks for the support and feedback!...and I totally agree, still can’t understand why they removed something that has been there for years, and now all of a sudden they claim it’s not needed...makes no sense...thanks for watching!
@talisikid1618
@talisikid1618 3 жыл бұрын
Get a lawyer.
@WAUCE7
@WAUCE7 11 ай бұрын
It's because the government made them change which kind of refrigerant they used, because global warming lies. I heard they had to make a bigger condenser and it didn't leave room to have the cooler, and maybe they didn't want to spend on redesign or whatever the fix would be, after all being the last couple model years.
@highplainsdrifter9849
@highplainsdrifter9849 3 жыл бұрын
Toyota owes customers trans cooler that was labeled on sales sticker. Class action needed. Nice video.
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Yea I’ve heard the class action idea mentioned a few times....surprised someone hasn’t pursued it yet, I’m still scratching my head on why they would remove such an inexpensive part!
@GunSnob
@GunSnob 3 жыл бұрын
To sell more transmissions and transmission components. Lol
@PaulSter
@PaulSter 3 жыл бұрын
@@GunSnob yes. I'm sure that's why they did it. 🙄
@fsb_-bf3th
@fsb_-bf3th 3 жыл бұрын
@@NitroZ18Fishing because this is the beginning of toyots downfall when it comes to reliability. Don't know what made them think "hey!! What IF we take out all the trans coolers!" Then the rest of toyota starts cheering
@gamebredduramax71
@gamebredduramax71 3 жыл бұрын
@@NitroZ18Fishing of Toyota wants to sell more trucks then Chevy, Ford, and Dodge then they have to do away with quality control.
@geraldwade5455
@geraldwade5455 3 жыл бұрын
Really detailed. Very good for folks having doubts on how to install the kit . This is a really great example for people who put up how to videos.
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thanks man, I really appreciate that!… It’s great to know people are benefiting from my videos, thanks for watching!
@jeremystinnett4642
@jeremystinnett4642 3 жыл бұрын
Just added Nick's cooler to my 2020 Limited. High quality kit and excellent install video. Definitely worth installing IMO. My temps, while towing, sit at 195 degrees like they should.
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thanks Jeremy!...couldn’t agree more, this kit is well worth the piece of mind, my temps have been MUCH better since install!...thanks for watching!
@dangray5948
@dangray5948 2 жыл бұрын
This video is fantastic!!! I have a 2008 5.7l with an AB60F trans. I live in Maine and one of my transmission cooler lines rotted out. I used this video as reference to replace the cooler lines and get the fluid level correct. I bought the Veepeak and the OBD Fusion app. Amazing how much easier these repairs are these days with reference from great contributors like yourself. Thanks so much!!!
@NitroZ18Fishing
@NitroZ18Fishing 2 жыл бұрын
Thanks for the feedback Dan, much appreciated!!…glad it helped out, thanks for watching!!
@garywaddle7235
@garywaddle7235 2 ай бұрын
Thank you very much for posting this very thorough video! You referencing the hard line mounting locations as well as the orientation of the lines from the thermostat was super helpful. It's people like you making videos like this that make the world a better place.
@jkuoverland8507
@jkuoverland8507 Ай бұрын
Thanks to you and your time an effort in this video, I Completed this mod on my 2021 Tundra and the results were outstanding! With the thermostat pinned open I was unable to get a temp greater than 187 while in tow/haul mode with an outside temp of 95 here in South Carolina. Now I was trying my best and driving hard. With it unpinned in normal thermostat mode, 190 degrees was the highest I could achieve. As comparison to yesterday before the install is was 94 degrees outside and I would achieve 209 degrees in normal around town driving. I ordered the parts OE parts from Sparks and a Derale Hyper cool from eTrailer. As far as I could tell, the fan didn’t cycle until I pulled in my driveway and put it in park and heat soak finally triggered the fan thermostat which is set for turning on around 185 and off at 177. Would of bought the Genuine Cool kit, but a day late and dollar short. Great mod what ever route you go. Thanks
@freshjamproductions9336
@freshjamproductions9336 3 жыл бұрын
Really appreciate the video . I put the cooler in Today . Pulling my 3000lb travel trailer in March from Page Az to Flagstaff I saw 270. My tacoma even with a small cooler (same trailer) never saw those temps. People that don’t think it’s needed for towing have no idea what they are talking about . Cooler FTW! 🙌
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Totally agree, I respect everyone’s opinion but this is a topic I absolutely think is a no brainer...heat kills transmissions, so why they took this out is mind boggling to me...thanks for watching!
@marcnemergut9490
@marcnemergut9490 3 жыл бұрын
Thanks for doing this. I feel much better about installing it myself now. Make sure you pull the thermostat pin!
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thanks for the feedback Marc!...yea I realized after I finished uploading video that I forgot to mention that last step, so I wrote in down in the video info section...thanks for watching, much appreciated!!
@drcoffee5588
@drcoffee5588 2 жыл бұрын
The holes in the right side of the transmission where the ATF flows into the heater are threaded. You can remove the factory heater, and thread in two 3/8” nipples, run the hose to the front and connect it to an aux trans cooler. A Derale 13011 bypass will keep it from over-cooling the fluid in winter temps. And much cheaper than the factory kit.
@knightandfog
@knightandfog 3 жыл бұрын
I've watched this video several times because it is so informative and well done......and I already have a transmission cooler lol
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thank you, I appreciate that!!…that’s awesome to hear!!
@jperello001
@jperello001 3 жыл бұрын
Just did this today on my 2019 Tundra. A few things were different, but pretty straight forward. I bought the aluminum cooler and I didn’t have a bracket or ground for the horn. I just moved it to another location... thanks for this video....my kit had no real instructions.
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
No prob, thanks for watching!...yea he upgraded the cooler to a slightly better option after I did the video, glad it was an easy install for ya!
@BillyGoatsAdventures
@BillyGoatsAdventures Ай бұрын
Great video, thank you. I just shook hands on a 2019 limited, very low mile Tundra, I've built an 80 series Land Cruiser from scratch. We currently use a 2007 Tundra to tow we've had for years, but cross country and longer trips. The 2007 4.7 struggles I was blown away. Toyota did not have a transmission cooler on the 2019 to 2021 Tundra.
@bryanlarrimer138
@bryanlarrimer138 2 жыл бұрын
My Scan Gauge II showed 230 degrees yesterday not towing in South East Texas . Outside temp was 100 F . We tow a 5xxx travel trailer and seeing these temps with no trailer has made me want to do this kit . Thanks for the info / video .
@NitroZ18Fishing
@NitroZ18Fishing 2 жыл бұрын
No problem, thanks for checking it out!… Definitely a worthwhile addition if you tow a lot, my temperatures were much improved, gave me peace of mind!
@tonyellis6383
@tonyellis6383 2 жыл бұрын
Just finished nick's cooler install on my 2021. Using his install video, zero issues and turned out to be a fun project. Thanks Nick!
@NitroZ18Fishing
@NitroZ18Fishing 2 жыл бұрын
Thanks for watching Tony!
@mikejager9548
@mikejager9548 Жыл бұрын
Do u know what the part number for the metal lines
@HeCute_
@HeCute_ 3 жыл бұрын
I don’t even own a tundra but I heard about how Toyota removed the trans cooler off their trucks. Was watching while snacking on chips. Great video!
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thank you, I appreciate it!…yea it’s crazy, I don’t care what they say, I think they made a mistake when they removed it from our trucks…thanks for watching!
@dominica2765
@dominica2765 3 жыл бұрын
Nice job thank you. Just bought the same kit for my 2020 pro. Wasn’t too happy when they said my truck came with a oil cooler on the window sticker to out it really doesn’t have one.Be blessed
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thanks man!...yea I wasn’t too happy with the temps I was seeing without it, it was almost a no brainer for me especially with towing the boat...thanks for watching!
@dominica2765
@dominica2765 3 жыл бұрын
You’re welcome
@bryanepley3717
@bryanepley3717 3 жыл бұрын
Great video! I watched it twice and then used it as reference during the install that took me about 3 1/2 hours. I moved the thermostat pin so that gravity couldn't pull it out (I thought this was kind of weak.), but after reading the comments I am going to go pull it out. Can't wait to monitor temps the next time I pull our travel trailer. Guessing I won't see 263 F again!
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thanks Bryan, much appreciated!!...yea this kit makes a TON of difference in temps...I haven’t seen a pan temp above 200 yet, crazy what a difference!
@EverydayJ1786
@EverydayJ1786 3 жыл бұрын
Good video . I did a cooler install on my 19' last summer as well ... I tow a 30ft travel trailer with my tundra and the cooler upgrade was a must ! . I welded in a bung into the trans pan which allowed me to install an Autometer trans temp gauge . Gives me accurate pan temps all the time .
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thanks Jordan!...and yea, that’s an awesome idea...Definitely a must in my opinion as well, especially for anyone who tows a lot... thanks for watching!
@gatornation3889
@gatornation3889 Жыл бұрын
Just got my complete kit Monday. I am using your video to install Saturday. I am also flushing the transmission fluid with amsoil.
@raphaelmontalvo432
@raphaelmontalvo432 2 жыл бұрын
I have a 2010 Tundra 4.6 4x4 I noticed transmission temperatures as high as 260 degrees while towing small boat and averaged 215 -225 degrees during regular driving around town by myself. I added a thermostat with aftermarket cooler high temp lines. The thermostat opens at 185 degrees and while towing it gets no higher and 188 degrees. I should’ve installed one long ago, Toyota kept telling me it could not be done. If you tow or carry heavy loads it’s well worth it.
@NitroZ18Fishing
@NitroZ18Fishing 2 жыл бұрын
Absolutely!!…makes no sense to me why they would remove it, it’s not even that expensive of a part!…thanks for watching!
@davydawg01
@davydawg01 3 жыл бұрын
Thanks for your videos bud. I have a '21 Platinum, and I've been looking at adding air bags and the wireless controller / compressor. This showed up as a recommended video and I completely forgot Toyota removed the transmission coolers. I have quite the parts list now. Thank again, for the very detailed videos.
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
No prob man, thanks for watching!…yea I feel like the list never stops growing 🤣…thankfully I have a very understanding wife…let me know if I can help at all!
@joescott701
@joescott701 3 жыл бұрын
Wow you really put this together well. I got a 2020 Tundra and plan to add this after my warranty is up . I'm not towing anything at the moment but want the transmission to go the distance running cooler not frying up components.
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
thanks Joe, much appreciated!!...thanks for watching!!
@irajackson6423
@irajackson6423 3 жыл бұрын
Watched the video for the upgrade, subbed for you rescuing old blue 👍🏼
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thank you for the support, I appreciate it!
@jamesmissig9611
@jamesmissig9611 2 жыл бұрын
Thank you for the video, was super helpful! Just finished installing the cooler on my 2019 Tundra, and it wouldn't have gone as smoothly without consulting your video.
@NitroZ18Fishing
@NitroZ18Fishing 2 жыл бұрын
Thanks for the feedback, glad it helped!
@stevenboise
@stevenboise 3 жыл бұрын
Really well done video. Thanks for putting this together!
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
thanks Steve, I appreciate it!!...thanks for watching!!
@markharris7723
@markharris7723 3 жыл бұрын
Nitro, that was so detailed and informative, even I can do it. which I will, I ordered the kit this morning. I also tow a bass boat and other heavy things. peace of mind in these hot Alabama summers. Thank You very much for your time making this video.
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thanks for the feedback Mark!!...and I totally agree, I would rather have peace of mind especially when towing...if ya need anything with the install, don’t be afraid to reach out to me, thanks for watching!!
@dwhite1282
@dwhite1282 3 жыл бұрын
This is seriously one of the most informative videos I’ve seen on any install of any part on any vehicle. Do you think this would be an upgrade on my 2017 tundra or does the OEM cooler work just as well?
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thank you, I appreciate that!!...and honestly I think you’re ok with the OEM piece on yours...I have no clue why Toyota removed these on the 2019-present Tundras after including it all those years....if you want to be sure, you can get the OBD2 scanner that I mentioned and linked below video and watch your temps...if they run high then I would consider upgrading to this kit, but you should be good with the OEM one... thanks for watching!
@edwinalexander1170
@edwinalexander1170 2 жыл бұрын
When you put transmission cooler, does it increase your car oil transmission consumption? ? How many litres increase when you re-fill?
@gregkeller80
@gregkeller80 Жыл бұрын
That is a professional install! Nice work.
@terry3469
@terry3469 3 жыл бұрын
Another outstanding and informative video. Thanks for the info. Go Blue!
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thanks Terry, much appreciated!!...and he’s definitely my side kick, he’ll be making appearances on future videos I’m sure!
@scottpeterson2529
@scottpeterson2529 3 жыл бұрын
Thanks for the video - was very helpful and well done. Putting the hoses on the thermostat before installing it was a very good tip.
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thanks Scott!...yea that definitely makes life a lot easier, thanks for watching!
@benwales1
@benwales1 3 жыл бұрын
I've got the Stillen Kit. With the Stillen kit you can run the cooler hoses through the cut out. That's what I did with mine.
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
I actually thought about doing that, it’s a great idea!… Thanks for watching!
@repairvehicle
@repairvehicle 3 жыл бұрын
Tundra specific kit?
@Randomly266
@Randomly266 3 жыл бұрын
Great video Sir! I just installed my kit from Nick today. Very easy and straightforward after watching your video. Keep up the awesome content! Thanks for sharing.
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thanks for the feedback Ken!…glad it helped ya out!
@mauricegriffin4227
@mauricegriffin4227 3 жыл бұрын
Great video. Very informative. I'm not sure (yet) if I need the transmission cooler. I did purchase an OBD scanner ( Veepeak) and the OBD fusion app.I followed your instructions for the ATF Pan and Torque Converter, so I will be able to monitor their temps going forward. Thanks for making it so easy to set up. I got temps for both immediately.
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
thank you!!...yea keep an eye on em, it's highly debated on whether it's needed or not, but most feel it's better to be safe than sorry...especially if towing...let me know how you make out, and thanks for watching!!
@stevengregory126
@stevengregory126 3 жыл бұрын
Got the same kit, Do not tow much but want this truck to last. Great kit as most of it is factory and his mounts are perfect!
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Yes sir, he definitely puts a nice kit together!...thanks for watching!
@stephensmith745
@stephensmith745 2 жыл бұрын
Needed the same thing, went a different direction to achieve similar result. Running 35” tires so I re-geared to 5.29 Nitro Gears. Now I can turn these tires like they are stock size and my transmission stays much cooler due to gear difference. OBDII shows consistently low transmission temps even while towing. Obviously this costs a lot more money, but I took care of two issues at once. Great video!
@NitroZ18Fishing
@NitroZ18Fishing 2 жыл бұрын
Nice!…I considered re-gearing but just never had it done…I kinda wish I did to be honest…thanks for watching!
@marcbrown8834
@marcbrown8834 3 жыл бұрын
Love video. I done same setup as your. I highly recommended put electric fan mount transmission cooler front. I put fan switch and scanguage2 monitor temp. This has help when I'm pulling my RV trailer.
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thanks Marc!...and ok awesome, I’ll check into that, I appreciate it!
@dalephillips8250
@dalephillips8250 3 жыл бұрын
Or if you know you're going to be in hot weather and towing heavy ...just pin the thermostat open and your temps will never go above 200...I watch a video of a guy to left his pinned open in hot weather and it stayed at 165.
@coachgym
@coachgym 2 жыл бұрын
Super job on this video. I purchased a 21 - had to go to Kansa to get the one I wanted - I'm in Texas. I'm in the big city and we must have theft protection for the catalytic converters - two were stolen in our church parking lot in the middle of the day a week ago. Both vehicles were Toyota's with a higher profile. I purchased the theft protection plate from KW at Offroad Desert Eagle - he has sold many of these over the last 12 years. KW did let me know that he has done all he can to give good ventilation for the catalytic converters but....there would be higher temps experienced and that could impact transmission oil temps - especially in Texas. I will be towing a 4.5K trailer with the Tundra and decided with the trailer towing and "cat" protection - the installation of the transmission cooler is a good idea. I wish I would have found your video sooner - I had already purchase several items from Sparks and a Hayden cooler from Parts Geek. The kit would have saved me from finding these parts! Still having a problem finding the right "hard line" set. Of course - I must choose a 2018 part as the 21 does not have it on the truck but it appears there are at least two choices of hard lines. If you have a part number or someone does - I would appreciate it. Thanks again - very informative.
@NitroZ18Fishing
@NitroZ18Fishing 2 жыл бұрын
Thanks Jim, I appreciate that!…adding the cooler is 💯 worth it, temps are MUCH better!…shoot Nick (the guy who sells these kits) an email, I’m sure he’d be happy to help ya with the part number, he’s a great guy to work with!…I’m not sure of it so unfortunately I’m no help there, I’m sorry!
@coachgym
@coachgym 2 жыл бұрын
@@NitroZ18Fishing Nick got right back with me. If I would have found him sooner - no doubt I would have purchased the kit. I will get the price down a little but he has done all the homework and has quality parts and support. He is a sharp fella. Thanks, Jim
@NitroZ18Fishing
@NitroZ18Fishing 2 жыл бұрын
Yea he’s a great guy to work with, knows his stuff for sure!
@ednorton47
@ednorton47 3 жыл бұрын
TFL tested the Tundra transmission without the cooler on the IKE gauntlet (long uphill section of freeway near Eisenhower Tunnel in Colorado). They concluded that transmission temperature rose to high levels, but never exceeded maximum design temperature.
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
yes sir, I saw that video...I'm just not comfortable with the temps I have been seeing, and I've already heard several cases of people getting warnings due to it...I just figured better safe than sorry, especially since I tow alot!...thanks for watching!!
@tacomanick5657
@tacomanick5657 3 жыл бұрын
I saw that same video and they did that test on a fall day in Colorado maybe 50-60 degrees max. I’d have to imagine the transmission temps would be higher on a 80-90 degree day.
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
thanks for the feedback Michael!...totally agree, this is one mod I highly recommend on our Tundras!
@descent815
@descent815 3 жыл бұрын
I got a 19 Tundra and I’m going to do this. Its funny this is in my feed when for the last 2 weeks iv been looking into what is the best ones. So thank you for the website cause I’m defiantly going to look into this.
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Yea no prob!…I highly recommend it, my temps are MUCH better since the install…especially with towing…if ya need any help just say the word, thanks for watching!
@descent815
@descent815 3 жыл бұрын
@@NitroZ18Fishing thank you! Will do
@odg09
@odg09 2 жыл бұрын
I just bought a 2020 platinum and this will be a must do mod. Great diy!! Thank you!!
@NitroZ18Fishing
@NitroZ18Fishing 2 жыл бұрын
No prob, thanks for checking it out!!…good luck with the new truck!!
@jperello001
@jperello001 3 жыл бұрын
I towed 6k the other day for 45 minutes in the transmission temp was 238. Outside temperature was in low 60’s, so I’m sure it would be over 250 in the summer. Just ordered and will do transmission fluid change with AMSOIL ATF.
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Yea the temps without a cooler are way too high for me, this was a no brainer!...well worth it, thanks for watching!
@gamebredduramax71
@gamebredduramax71 3 жыл бұрын
Amsoil is some top shelf oils, I’ve been using it in lawn equipment and my diesel and gas trucks. Here’s how good amsoil synthetic is, I bought a new blower and it wants me to run 32:1 mix ratio, with amsoil Sabre I’m mixing 100:1, 1.5 ounces of oil per gallon.
@toweroperator
@toweroperator 3 жыл бұрын
This video was the best keep up the great job so we’ll explained …awesome video
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thanks so much, I appreciate that!!
@Scottstunts
@Scottstunts 3 жыл бұрын
As soon as the oil hit your Apple Watch I freaked out....lol.
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Hahahaha....my wife always yells at me to take it off when I’m workin on the truck...You can see how much I listen 🤣
@rickm5853
@rickm5853 3 жыл бұрын
That I got to spend a grand to have this installed burns me to no end. Great video. Love my '19. HATE Toyota for this move.
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thanks Rick!...and I totally agree, it’s crazy to me that they removed this after all the years of including it...makes no sense...thanks for watching!
@rickm5853
@rickm5853 3 жыл бұрын
@@NitroZ18Fishing Oh it makes sense to the accountants running Toyota. Multiply the cost of all those coolers being deleted and add that to all the transmissions they will get to repair =$$$$$$$
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
hate to agree with ya on this, but it def doesn't add up any other way!
@ProCoach2373
@ProCoach2373 3 жыл бұрын
That’s a very short term outlook coming from a brand with a long pedigree of reliability. Doing what’s best for the consumer will work out best in the end, but I tend to agree with it being a short term financial decision based on how many consumers will actually cause failures. I’m glad my 2017 has a cooler, that’s for sure.
@agarciaguero
@agarciaguero 3 жыл бұрын
Thank you sir for all the information. You got yourself a new subscriber.
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thanks man, greatly appreciated!!...thanks for following along!!
@utid1957
@utid1957 3 жыл бұрын
Awesome step-by-step instructions!!!! Very honest and knowledgeable guy!!!!!
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thank you, I greatly appreciate that!!
@danz4928
@danz4928 2 жыл бұрын
You are unbelievable doing all that! Very nice and informative video. I was trying to see what kind of running boards do you have in your truck .. thanks
@NitroZ18Fishing
@NitroZ18Fishing 2 жыл бұрын
Thanks man, I appreciate it!…love these projects, I’m always messing with something when I have some free time…haha…my running boards are actually from eBay, got em for $150 but honestly don’t recommend them…they’re rusting real bad and I’m about to swap em…for the price I guess I got my moneys worth, but they don’t hold up like the higher end brands!
@JW-hf1oc
@JW-hf1oc 3 жыл бұрын
Nice video. I have an 2018 tundra . But this answers a lot of questions for folks
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thanks man, I appreciate it!
@mikejager9548
@mikejager9548 Жыл бұрын
Hey I know u posted this a long time ago. I’m looking for the part number for the metal trans lines.
@waqarsyed6641
@waqarsyed6641 3 жыл бұрын
Awesome dude. Toyota Tundra one badass truck on planet Earth
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thanks man!...and yes sir, agreed...my favorite pick up out there for sure!
@zurcyer
@zurcyer 3 жыл бұрын
Great video. Very detailed. Sat and watched the whole thing and I don’t even own a Tundra. Lol. I drive a Camry. Left you a like. Great job.
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thanks man, I appreciate that!!...glad someone doesn’t find me too boring...lol!...thanks for watching!
@lrcreamer
@lrcreamer 2 жыл бұрын
What a great video waiting for my 2021 to arrive I already have the kit
@NitroZ18Fishing
@NitroZ18Fishing 2 жыл бұрын
Thanks Lawrence, I appreciate it!…good luck with the new truck!
@davidm.8309
@davidm.8309 3 жыл бұрын
Thank you for the video. Kit ordered from Nick.
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
no prob, thanks for watching David!!
@davidm.8309
@davidm.8309 3 жыл бұрын
@@NitroZ18Fishing Success! Installed today. Twisting the hard line into place just took a few minutes but your video was clear and really helped explain that part. Attaching the 2 hoses at the front to the hard line was a fight, that was the most difficult part. Still can’t believe they removed this but even left the bracket near the warmer for the hoses. Thanks again for the video.
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
awesome, glad to hear it man!...yea getting them hoses on to the hard lines in the front was no picnic...haha...thanks again for watching!!
@buddylacey8673
@buddylacey8673 3 жыл бұрын
Great job. Thanks for sharing info.
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
No prob, thank you for watching!!
@rayf982
@rayf982 4 ай бұрын
Can I just fill the cooler with fluid before before I put the lines on the cooler its self? Nice work.
@stevenlefebvre2991
@stevenlefebvre2991 3 жыл бұрын
Great job with the video well done.
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thanks Steve, I appreciate it!!
@k.howard5927
@k.howard5927 Жыл бұрын
Excellent excellent video. Thanks for the work on this.
@NitroZ18Fishing
@NitroZ18Fishing Жыл бұрын
Thank you, I appreciate that!!
@outcyder1738
@outcyder1738 3 жыл бұрын
Excellent video. Very well done!
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thank you, I appreciate that!!
@phambo1tp
@phambo1tp 3 жыл бұрын
Excellent step by step video. Thanks
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
No prob, thank you!... I appreciate that!
@kingsxjt
@kingsxjt Жыл бұрын
Thanks so much for a well made video. I would have never figured out setting up the PID's. One question someone may be able to help me with. How can I adjust the voltage readout? It's off by a full volt and I have verified this by three different meters.
@tompharr2908
@tompharr2908 Жыл бұрын
do you run the engine with the thermostat pinned to fill cooler prior to opening overflow?
@kwmulligan
@kwmulligan 2 жыл бұрын
Stellar job on this video, Great job. Thanks
@NitroZ18Fishing
@NitroZ18Fishing 2 жыл бұрын
Thanks man, I appreciate that!!
@stephenmayne4886
@stephenmayne4886 3 жыл бұрын
Thanks for sharing this information.
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
No prob, thanks for watching Steve!!
@highpro1394
@highpro1394 3 жыл бұрын
Man that is a killer video. Great job👍👍👍👍 i need this for my 2020 platinum too.
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thanks brother!!... I definitely recommend it for sure… He puts some awesome kits together for us… I believe he sold out after I made the video but shoot him an email, he’s taking orders for when it’s back in stock
@highpro1394
@highpro1394 3 жыл бұрын
Yeah I just checked and I saw he is sold out. I will have to hit him up.
@highpro1394
@highpro1394 3 жыл бұрын
Hey do you notice any performance differences other than cooler trans temps with the cooler installed?
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
haven't really noticed too much with performance gains, but temps are MUCH better...highest I've seen since install is 192 in the pan, huge improvement...it can only help for sure!
@b.mendiola2515
@b.mendiola2515 3 жыл бұрын
Wouldn’t this void the warranty if installed at home? I just got a 2019 tundra
@fchen7
@fchen7 3 жыл бұрын
super nice and informative video ... i watched the entire video, and i dont even own a Tundra .. :)
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thanks so much, I appreciate that!!
@aaronandraquel
@aaronandraquel 3 жыл бұрын
Well I finally got around to installing the transmission cooler. Thanks for the good video. What kind of temps are you at when towing?
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Hey Aaron, glad the video helped out!…my pan temps never get over 200, even when towing…such an awesome improvement over what I was seeing before install!
@Danny-tk3rs
@Danny-tk3rs Жыл бұрын
Thanks Nitro!!! I am shopping for a used Tundra now… was going to try and stay at ‘18 or older for this reason but this gives me confidence to look newer and get this corrected. One question though… is there a way to have a permanent gauge that is hard wired in and mounted on my dashboard? Do you ( or anyone know what I would need to do for that?) I would like to keep constant monitoring without taking over my phone…. Just wondering? Thanks again for such an informative video!!! And… fish on!!!
@NitroZ18Fishing
@NitroZ18Fishing Жыл бұрын
Hey Danny!...thank you, I appreciate the feedback!...that's an excellent question, and I'm honestly not sure...hopefully someone can chime in for ya...I would imagine there would be a way to rig one up but that's something I never even thought of!
@Danny-tk3rs
@Danny-tk3rs Жыл бұрын
@@NitroZ18Fishing Hey maybe Nick might know … oh and how does your phone through the app actually “pick up” the temperature? I can’t figure that one out.
@johnspitta6725
@johnspitta6725 2 жыл бұрын
Howdy. I'm in the middle of my install. I'm probably over thinking this. I assume the cooler is itself doesn't have a flow direction. Meaning. Fluid coming in and Fluid coming out could go either way. I'm pondering something.
@NitroZ18Fishing
@NitroZ18Fishing 2 жыл бұрын
Hey John!…that’s correct, on the cooler I installed the flow didn’t matter…hope that helps!
@SchafferTwins
@SchafferTwins 2 жыл бұрын
Clarification please. What cycles the fluid into the cooler and where is the air going? Is that what is pushing out the excess fluid when you are draining at the end, as the air comes back front the cooler? It's then a closed system again once you pull the pin till it reaches what temp for the thermostat to open? Great video by the way. Looks like my brother and I could tackle this project on my 2019 TRD.
@jggutierrez9
@jggutierrez9 3 жыл бұрын
I commend you on your amazing tutorial! Well done! I'm debating on purchasing a Toyota Tundra and was concerned about the new models not having a transmission cooler. One question, does your trans. Temp get up to design specs? I have talked with a few Toyota master mechanics, they stressed it is important to get the transmission temp up to temp.
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thanks Jason, I appreciate that!…pan temps get up to low-mid 190’s, but haven’t gone over 200 once that I’ve noticed...so they’re just about perfect for me...thanks for watching!
@pecosb5221
@pecosb5221 6 ай бұрын
Can I order just the hard lines?
@louismaita2767
@louismaita2767 3 жыл бұрын
Maybe I missed it, but I assume you had the truck perfectly level because of the trans oil check near the end of the video? A great very detailed video........Thanks a Bunch!
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Yes sir, I mention it in the beginning about the truck needing to be level from front to back, side to side...I got lucky with my garage floor, my truck sat perfectly for me to do the job without any issues!... thanks for watching!
@saucedohector110
@saucedohector110 3 жыл бұрын
Great video guy, just curious what interval are you changing your transmission oil? I have about 43K and I wish I had known about this earlier.
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thanks man, I appreciate it!...so much info out there about when to change transmission fluid, but I plan on doing mine between 30-40k, mainly because I tow somewhat frequently
@kmalerich
@kmalerich 3 жыл бұрын
I did the full set up and it tests good but when I go to dashboards I just have the default one. It looks like you need to add the individual displays from the user defined PIDs. That seemed to do the trick.
@Fox40-MD
@Fox40-MD 2 жыл бұрын
When do you pull the pin?
@AllWriteSoft
@AllWriteSoft 3 жыл бұрын
I gave you a thumbs up just for the dog!
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Hahaha...thank you!...he’s my right hand man!
@wiscowalleye7954
@wiscowalleye7954 Жыл бұрын
Great video thanks for posting.
@NitroZ18Fishing
@NitroZ18Fishing Жыл бұрын
No prob, thanks for watching!
@thomasdean5651
@thomasdean5651 2 ай бұрын
Do you or any of the viewers know what temp the thermastat will open up at?
@qouavang3646
@qouavang3646 2 жыл бұрын
Good thing I got a 2018, I think that was the best year made tundras for the 2.5 and the 2015 models I had a TRD pro 2015 that I put 100k miles on it no issued at all
@NitroZ18Fishing
@NitroZ18Fishing 2 жыл бұрын
Yea this is my 3rd Tundra, I had a 14, 17, and now this 20…I agree, loved all 3 but no clue why they removed this cooler…I don’t care what they say, if it “wasn’t needed” then why was it on every year up to 19…haha…thanks for watching!
@thomasdean5651
@thomasdean5651 4 ай бұрын
Does anyone know of an OBD2 scanner that will read the transmission oil temp on the Tundra. If we're going to install a cooler, would be nice to see the temps, and know its working.
@Torahviviente144
@Torahviviente144 Ай бұрын
What if you dont tow anything u think u still need it ?
@ups3357
@ups3357 3 жыл бұрын
Is this only for the 5.7 engine? I have a 2019 with the 4.6 and I tow an Rv this would be helpful. Great video thanks
@zloftsgard1
@zloftsgard1 3 жыл бұрын
This was an excellent video. Great job! Is there any advantage to filling the cooler with fluid prior to connecting the hoses? Might fill the system with fluid faster?
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thank you, I appreciate that!!...yea you can definitely do that, I just tried to follow the instructions given with the kit so it didn’t get confusing for anyone who purchases it...but that would absolutely work!
@mattottie6410
@mattottie6410 3 жыл бұрын
Are u an aircraft A/P mech. You said adel clamps, have not heard that in a long time, good job installing cooler, thx. Matt
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thanks Matt!… I appreciate it!… And no, believe it or not I’m actually a registered nurse… My truck and boat are my hobbies on the side, I’m always tinkering with something or doing some kind of modification… Keeps me busy and out of trouble with the wife 🤣...Thanks for watching!
@edwinalexander1170
@edwinalexander1170 2 жыл бұрын
Very well explained
@NitroZ18Fishing
@NitroZ18Fishing 2 жыл бұрын
Thank you, much appreciated!
@christian_7500
@christian_7500 8 ай бұрын
I just bought a Tundra 2020 with RWD. Does anyone have this version and experience overheating? During towing / during normal driving? Also, do folks with all other models that are lacking the factory cooler generally only experience overheating when towing?
@tacomanick5657
@tacomanick5657 3 жыл бұрын
Great video. Thanks for taking your time and being very detailed. Probably going to order a kit in the spring. What were your transmission temps before and after install. Thanks.
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thank you!...before install I would see temps as high as 230+ in the pan when towing...now I haven’t seen anything above 205-210, when I’m not towing the pan never goes over 195...huge improvement...thanks for watching!
@seabass22
@seabass22 3 жыл бұрын
@@NitroZ18Fishing were you in 4th gear or in 5th or 6th?
@groth3395
@groth3395 Жыл бұрын
did I miss it? When (if ever) is the "pin" pulled on the thermostat?
@m.b8257
@m.b8257 3 жыл бұрын
Someone should make an aftermarket dip stick and tube, it would sure make checking the fluid a lot easier .
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Right!?...you would think someone would have figured out an easier way by now!...thanks for watching!
@mikejager9548
@mikejager9548 Жыл бұрын
How do you add your own dashboards for the ATF pan and the torque converter? Do not understand.
@aaronandraquel
@aaronandraquel 3 жыл бұрын
Great videos. I'm going to buy a kit
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thanks Aaron!... much appreciated!
@gilwolf7556
@gilwolf7556 3 жыл бұрын
Thank you for the video. Really easy and very well explained. I have a question for you that i may have missed the answer. I see the pin in the thermostat. Is the thermostat pinned and the oils is flowing thru the new cooler at the time you check the level ? Thank you again for your video.
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
Thanks for watching Virgil!...Yepper, leave that pin in until after the entire process is completed, it should be the very last thing ya do...you can remove it before going for test drive, but I left mine in until I knew there were no leaks and everything was buttoned up...so it was literally the very last thing I did...hope that helps!
@gilwolf7556
@gilwolf7556 3 жыл бұрын
@@NitroZ18Fishing Thank you very much. It did helped a lot.
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
no prob!
@ellobo1326
@ellobo1326 2 жыл бұрын
Excellent instructional video. Would this kit work with a ‘21 TRD Pro ?
@NitroZ18Fishing
@NitroZ18Fishing 2 жыл бұрын
Thank you!!…yepper, it works with all models up to the new Gen (2022)…years 19-21 are all compatible, thanks for watching!
@loctite6267
@loctite6267 3 жыл бұрын
I follow your information to set up the OBD-II Scan tool (Veepeak)it work but when I go to the main screen click on dashboards to monitor Atf pan and torque converter, my screen don't display two windows , one for aft pan another for torque converter like your, how do you set up to had on like that to monitor them?
@dominica2765
@dominica2765 3 жыл бұрын
Hi curious where does the hoses from the heat exchanger run to do they run to the heater core just curious on the original set up
@tomle2116
@tomle2116 3 жыл бұрын
Why do you need an OBD reader to monitor temp pan? You can use a scanner + temp gun right? Correct if I’m wrong
@NitroZ18Fishing
@NitroZ18Fishing 3 жыл бұрын
No sir, you’re correct!...if you have a temp gun you can absolutely use that, thanks for watching!
@lrcreamer
@lrcreamer 2 жыл бұрын
Did the install today all went well they did change the cooler to a horizontal cooler. Everything went great until I got the VIP Fusion I could not get the values to flip to the dashboard with gauges. I was forced to keep hitting the test button until I hit the Pan Temp. What is the secret
@gatornation3889
@gatornation3889 Жыл бұрын
Got a question, i just got my kit in, trying to install the app. Every time I check custom pid to add the icon, the app keeps the "speed" as the name on the icon and it reads speed on the display, not trans temp. How do i get the app to stop adding "speed" every time I go to add trans temp guage ? It literally changes it from trans temp to speed ? I have a 2019
Toyota Tundra Transmission Replaced at 100k Miles? Here's What Happened
18:46
2020 tundra transmission cooler upgrade
19:10
APrecision
Рет қаралды 33 М.
天使救了路飞!#天使#小丑#路飞#家庭
00:35
家庭搞笑日记
Рет қаралды 91 МЛН
Running With Bigger And Bigger Feastables
00:17
MrBeast
Рет қаралды 151 МЛН
Вы чего бл….🤣🤣🙏🏽🙏🏽🙏🏽
00:18
الذرة أنقذت حياتي🌽😱
00:27
Cool Tool SHORTS Arabic
Рет қаралды 24 МЛН
NEVER do THIS to your Automatic Transmission Car
15:15
The Car Care Nut
Рет қаралды 2,9 МЛН
Should you buy a Toyota Tundra 2007-2021?
29:47
The Car Care Nut
Рет қаралды 1,3 МЛН
Reader: 2020 Toyota Tundra Transmission Frying, Toyota Responds
8:46
Pickup Truck Plus SUV Talk
Рет қаралды 69 М.
The Problem With These Headlights
17:55
The Engineers Post
Рет қаралды 1 МЛН
WhistlinDiesel Cybertruck Durability Test #1
21:55
WhistlinDiesel
Рет қаралды 21 МЛН
天使救了路飞!#天使#小丑#路飞#家庭
00:35
家庭搞笑日记
Рет қаралды 91 МЛН