Really glad for the paid promotion. This is a channel I would to love to see continue making amazing content

These people are real Americans. Genuine. You know their word is good and a handshake agreement is as good as anything can be. Quite an inspiration really. I think a lot Of people watch this channel who maybe don’t even own a vehicle (certainly aren’t fabricators/off roaders), but they lack in their own life the sincerity and richness in human exchange that is so prevalent in both this and Matt’s channel; they watch the channel because it makes them feel good. Everybody in these videos genuinely loves those around them, everybody is being helpful, happy and it’s quite heart warming. Watching this channel has inspired me to buy a welder so I can build a Jeep WJ, and fiddle with my 70 Camaro. I have enough mechanical sympathy to figure out out as I go, fixed a garden rake last night for practice! Looks like I fixed it with boiled metal bubble gum lol, but everything is a learning process! Thank you to everyone who is involved in making these videos, from the cameraman to the editor, and of course the “stars”. You’ve cheered me up and lit a fire under my ass. Keep it up, that’s a direct order.

I really love how y'all like mountain dew (should be a sponsor) so much! And not much swearing. Such a great family show! Thank you 💟 it's great to a couple of Southern utah peeps getting a little love

It's cool that you and Matt use bits of the same footage. I forget wich channel I'm watching sometimes. All good stuff.

I said this on Matt's channel also that I just want to hang out with Matt and Paul and just watch what they do. They cool dudes

Don't listen to these clowns complaining about the commercial. You guys did a great job keeping it fun and creative. I actually enjoyed it as much as the rest of the video. Keep it up. 100% support from real fans.

Love the sign in the salon: "Do What You Love, Love What You Do." Good advice and definitely evident in Fab Rats and Matt's Offroad organizations.

IDK how I found Fab Rats and Matt's channels but I'm glad I did.

Dang Paul,looks like you have done that once or twice before....lol.....

Ahh, one video clip brings all of Matt's Universe together! I learned about "Junky" and the Corvair addiction when searching on the Internet. He started Red Ryder towing and bought Winder, now he's finishing the wagon and redeeming himself!

15:00 If an air compressor is noisy: In addition to setting it outside, connect the compressor suction to a piece of pipe, run the pipe to just under the edge of the roof overhang, then install the air filter of choice. You will be surprised how quiet it is.

The fab rats guy is impressive. And he’s got a regular day job. Pretty cool

Such confidence through that entire build. That is experience.

Fab-Rats and Matt’s Off-road are a great team no doubt! It nice to see the stuff we missed on Matt’s video.

How does one guy know how to do so many different things and more importantly how to do them so well???? Nice job Paul! Love the channel, your family and friends! Thanks for sharing with us!...

The Fab-Matts wagon. The color of the trans looks good

You guys make a really good team, your 'in shop' comradery is fun to watch. It reminds me of myself, my father and brother and many friends working on projects together. Great job as well.

i was wondering when Matt was going to bring the Corvair over to you for some help

Paul you are a master. Jack of all trades

It's nice to watch a channel that i am not hearing four letter words and is entertaining and educational. I have a stand, like your family does, I don't watch what my kids and grandkids do not have to leave the room. Thanks keep up the great work and God bless.

Impressive that someone can learn to design and repair stuff like that. I still cant figure out how to program my light timers.

Just another day fellas!!!! I've worked around Paul and Matt. Totally different styles but both get the job done right. Paul is the smartest guy I've been around but he portrayes it all nonchalant. 😎🤙

thank you KEEPS.... you sponsored a GREAT channel...

I love how this vehicle is coming together and the fun you guys have doing it!

you are the kind of guys that have made America the country that most people admire. May God bless you

Paul you are so polite ! Matt when he gets an idea you can’t change his mind. But You put up with it

I dono y but my heart melts when FAB and MAT works together. It takes a good heart to make mat to work in fab's shop as his own. U two hav very warm relationship, keep it up bros.... God bless u..

Great job Paul. Was at Matt's place last week before he took it up to your place. You must have been born with the auto repair guide implanted in your brain when you were born. Amazing, just amazing. Take care and be safe out there.

Dang, y'all shoulda collab'd with Richard at Percision Transmission. That man is the heart surgeon of the automotive world.

He Smurfed the hell out of that truck lol

I have rebuilt a couple transmissions, it’s obvious this guy really knows what he is doing.

I love Micelle's humour. She sees the funny side of every situation, and keeps the team having positive attitudes. I'm sure I am not alone in wanting to know Paul's background. He has serious skills in so many aspects of vehicle building, and he surely had to have some sort of formal training to learn some of that stuff. At Ford (UK) Product Development where I worked for 40 years, the transmission bay was manned by wizards who rebuilt transmissions using secret spells and black arts, and they would be horrified to see Paul giving up their secrets.

Great content, great skills and so good to see you got some sponsorship for the video.

2:15 Matt, that is the most convoluted way of making a bracket/socket/cradle for your radiator I’ve ever heard, it was funny because Paul’s idea is fantastic but you were emotionally attached to your process, I understand. I understand completely.

This is one of the few channels I watch where the content is good enough to make me sit through the ads just to make sure I'm supporting them in some small way. Is it still male-pattern baldness if your entire head is bald?

That advertisement was just to die for!! Peeps 😂🤣😂🤣 Matt looked so happy to be in that video!!!!!!! Lmfao. You guys are all awesome keep it up!!!!😁

You are one Handy SOB! Love the build Matt!!!

Paul is a Transmission Devil Master!!!! I want to learn more about transmissions now. and the wood splitter is Bad Ass!!!!

Fab Rat Paul is a hell of a good fabricator, mechanic and inventor!!! Would like to watch more about how Paul and Matt know each other.

Cool rebuild of the transmission for Matt's Corvair👍🇺🇸..

looks like Matt brought everything you need to finish your tow truck... THANKS MATT....lol

Love these episodes!!!!!! Just wish they were longer :(

Paul, I am impressed! You went through that transmission like it was nothing! Good Job!

Wow, that was a blast. I was there for just a little bit and am completely amazed at how much work Paul can do from his shop. Good luck on your next build and a very Merry Christmas to you all.

I’m not a big fan of corvairs but that is one bad ass Corvair. I would not mind owning Matt’s corvair 4x4. You make rebuilding an entire trans look so easy. In my experience it’s no where near that easy Keep up the great videos

I've watched this vid 100times. Gotta love the chemistry between everyone.

Paul you are an amazing man of many talents. Matt is not real receptive to suggestions but they should be made anyway. You both are very good at what you do. Thanks for sharing.

Is there ANYTHING Paul CAN'T rebuild/modify/improve in his shop?

I knew it was only a matter of time before the wagon made its way to Fab-Rats.

It finally dawned on me! This reminds me of the comedy Johnny Cash's song "One piece at a time" where he puts a Cadillac together from parts from 49-70 he "collected" when he worked for GM. There was a video of it that was hilarious. 0f course, any song Johnny Cash sang was my favorite

I have never watched a transmission rebuilt. Next time my mechanic hands me a bill for rebuilding, I will make sure to frown less.

Man rebuilding transmissions is an art form.

I was watching Matt's off road recovery and he mentioned Fab Rats helping with the corvair build. Now I'm hooked on both. I can feel and smell both shops as shops should be. Great natural talent to both of you and all great personalities !!!

Precision transmission is another good channel!!! Hes been doing transmissions for over 40 years and knows all the tricks!!! Very informative!!! Love you guys!!!! Keep up the great work!!!!

Sweet !!!!!!! I love it when u guys work together......👍👍 compressor didn't bother me...I bought a gal and half mini compressor and put it in my livingroom with the drain valve open just enough for it go off every 5 minutes just so it feels like home...lmfao!!!!!!! CANT WAIT FOR THAT BUILD!!!!!.. WELL BOTH NOW...LOL!!!!

Putting it back together from memory. Nice.

I would have never thought I would enjoy watching a transmission being put together as much as I hate working on cars!💯😂 You guys Rock! No wonder the Movar is kick ass! Great job fellas!💯👊🏾👊🏾✌🏽

i was at that derby one of the best finishes to a derby that i have ever seen

Wait this isn’t precision transmissions.... Love the content.

Hopefully we get to see the transfer case rebuild too. Hint hint. Great video gang. I really enjoy the collaborations you guys do.

...that looks real heavy duty. good job, stay safe..

Well Paul, you make it look so easy. I love the 'what's this part?' & then you toss it. I always try to see if I can do with less parts than the original!! 🤨😉 With as many times as Matt was running the lift up & down, you would think he would have it figured out.🤔😁 Keep up the good work, I look forward to seeing the final results!!

Being a gear head for years I look forward to your videos. Always something different..thx.

You and matt seem like brothers haha. I love watching yall work together. You guys inspire me to get up and get to work every day. Keep doing you guys!

That transmission vise IS "The Bomb"!!

Congrats on the build and being sponsored now 💯💯 have watched y’all come from nothing to now and couldn’t be more proud to be apart of it all❤️ keep it up and don’t stop now 😁

Wish these were an hour long

First time I've ever watched a full tranny rebuild. Wow, that looks difficult. I was admiring your log splitter. Awesome! I'm here from Matt's channel. I like when you do collabs together. I enjoy watching the banter that only comes with good friends.

I love how these two collaborate with each other, I like both channels.

Fun episode! 😎👍🏻 some knowledge flying around in that room..

He is so good with automatic transmissions.. Hats of for that Hope we had a good mechanic like him in our place...

Great vid! Very instructional and informative on how the trans is put together.

Man.....I like to see you Disassembling & Assembling these things -Tans. & diff.- over and over, you're playing with like Lego. Best guys ever I feel like I'm with you in the shop no pretending at all🌹🌹🌹

Paul is the friend that everyone needs to have near by... He is a hands on righ away guy... Congrats to FabRats....

I happily have not seen the inside of a transmission since the 1980s. Great job Paul. Nice camera work. Nice to see Lady also. Surprised Matt is not doing a joint transfer case for more choices.

Matt and Paul, definitely two of my favourite car guys, just keep on making this perfect content.

Transmissions have always been super intimidating to me. You make it look easy.

Your going to half to make him some bead locks for this ride

Thanks for another great video, Paul. Nice teamwork.

Yes I have gone back to some of the first work (videos) and Boy you can tell the difference and its great !!!!

Been waiting for this video since Matt posted on Instagram that they were going to your shop, glad it’s finally here!

I’ve been watching Precision Transmissions for a long time and Richard seems the best. (You’d be second!).

Thanks for another video slice of your lives folks. When watching Paul reassemble that automatic transmission I suddenly had a memory from my youth that I'd been suppressing of installing a shift kit into a Turbo 350. It's wonderful to know that qualified craftsman like Paul, Rudi and Matt are still out there as I know I'm never, ever, never going inside another automatic transmission... did I mention ever? Thanks again and all the best to you folks this Christmas Season.

Wow watching you rebuild that transmission. What a learning experience!

As always Paul does not disappoint he just continues to deliver another awesome job well done!

man you all (FR and MORR) are good people. friends that pay each other for their time is awesome as well! Keep up the great stuff!

Really incredible work!!! Love watching you do your thing Paul!! Thx

Reminds so much my younger years! Air compressor and all. Thank you. Worked a transmission shop in my 20s. It's best to ..peign?..sounds like peen... sheet metal oil pans. Rest a small ballpein hammer on the bolt holes in the pan, tap with another to lightly dimple the opening up a bit. Helps the seal.

I’m so amazed by all your skills!! I mean a gearbox is so many parts in a specific order and just just know them all. Amazing 👍👍👍 wow! (A car guy from Sweden)

Guys a badass, he can build anything! Good size skillset.

Great Job all around. Loved the commercial. Pappa Dar is a star! Thanks for sharing the adventure. 2 great channels together is an awesome video.

I had to check out your channel after seeing Matt's. Don't get much time in a shop anymore and appreciate seeing you guys all working together. Keep up the good work!

This channel is going to freaking explode. Need to work in some more 4x4 or hot rod builds.

These 2 guys are amazing. You can see they do based on experience. They can figure it out. Learning a whole lot....👍

Wow, that is so complex. You guys just show me how little I actually know about cars! I would love to spend a year with you all just learning from you both.

Funny having worked a life time in some noisy places, I didn't notice the air compressor until they mentioned it. Always fun to watch these guys.

I love when these guys get together. All hell brakes loose in the best ways!

Great job! So nice to have great buds. The best to you and all your loved ones.

Michelle is a Keeper! I actually listened to the whole pitch! Great job!

Absolutely Awesome You guys!! I Love when my Two Favorite KZfaqrs are working together!! Everything is looking Freaking sweet. Loving every min of the videos! Have a MERRY CHRISTMAS GUYS