Trash Can & PVC Pipe Dust Collection System for UNDER $40!

Рет қаралды 140,485

Күн бұрын

Thanks for Watching! If you like what you watched... Please give us a thumbs up and Subscribe! Don't forget to click on the Bell to be updated on more uploads!
********************************************************************
Buy Your KalindsLife, JigginJunkie and Crawlspace Craftsman Merch Here:
Http://www.TheCrawlspaceCraftsman.com
Check out this link!
linktr.ee/kalindslife
********************************************************************
KalindsLife
1003 Mulford Ct
PO Box 1077
Knightdale, NC 27545-1077
*********************************************************************
Want to help support our channel and drive to offer better content!? Visit our Patreon page at the link below and become a Patron of ours with a small support donation. This will give us the ability to do what we love and upgrade equipment, buy props and items for new videos and much more! Thanks so much for considering!
/ kalindslife
*********************************************************************
Click on the link below to order some AWESOME KalindsLife and More items!!! We get a small percentage of each sale and put all money made back into the channel so we can continue to make fun and exciting videos for you to watch!
shop.spreadshirt.com/KalindsL...
*********************************************************************
Also don’t forget to Follow us on.....
Email: KalindsLife@gmail.com
Instagram: @KalindsLife
*********************************************************************
Filmed On: iPhone Xs Max
Edited On: iMovie &/or CuteCut App
Thumbnail Image: Thumbnail Maker
Microphone: iPhone Xs Max
*********************************************************************

Пікірлер: 204

@jewdd1989 Жыл бұрын

I like this far more than the expensive dust deputy version because with a trash can you can hold a lot more with less trips to the dumpster! And especially because it’s easy to transport from tool to tool. I might need an actual cart because my massive vacuum gets stuck on my uneven concrete floor but this really makes a fast and cheap solution. It’s been too cold in my area to safely run the table saw outside so I’ve been stuck inside and wishing I’d had a way to connect to the table saw plus a container for all the massive chips. My garage is so dusty and even with my mask on I cough from all the fine shit in the air. Anyways nice job and thrilled to see a faster, better solution than some of the others that require shipping in, etc.

@TheCrawlspaceCraftsman Жыл бұрын

Thanks for watching!!! Appreciate that!!!

@yanney4667 5 жыл бұрын

Good idea! Works better than the actual dust collection system we had in our fence shop.

@TheCrawlspaceCraftsman 5 жыл бұрын

I’m so glad I made this thing!!! Now I just need to find a way to tuck it under my work bench and outa the way. Thanks for watching!!!

@grobertson2008 4 жыл бұрын

Just made this unit and you’re correct, it works great. I have a smaller shop vac (3.0 hp) a little more on the ground than I’d like but 95% was in the can. I might not have a big enough shop vac. But it works great thanks.

@TheCrawlspaceCraftsman 4 жыл бұрын

Awesome!!!! Thanks for watching!!!!

@jeffsalt2080 4 жыл бұрын

Nice work. Thanks for the idea. Just a thought, when you opened the trashcan, the inbound nozzle iss facing the handle of the trashcan. I'd bet that if you adjust it so it aims past the handle, there would be a lot less sawdust in the vacuum.

@genemccarthy2847 Жыл бұрын

I have the opposite problem working outside...I live in Northern Arizona were the temperatures can reach 106 degrees. Thanks for the great video!

@TheCrawlspaceCraftsman Жыл бұрын

Its been a Hot year for sure!!!! Thanks for watching!!!

@mikefinley4367 2 жыл бұрын

Watched many videos, some great ideas but this is way more useful for my larger usage and large amount of chips / dust created. Whatever a viewer decides fits their needs it's a must, get er done. Thanks for posting.

@TheCrawlspaceCraftsman 2 жыл бұрын

Thanks for watching !!!

@mikefinley4367 2 жыл бұрын

@@TheCrawlspaceCraftsman Your welcome. Not sure what it is about your intro but it made me hungry, ha, ha!

@PAPATexas 5 жыл бұрын

Pretty cool set-up. Oh yea, it did an awesome job! Money save tips for sure!

@TheCrawlspaceCraftsman 5 жыл бұрын

Hey Papa! I’d recommend getting one of those food safe drums with a screw off lid. A lot more durable. I cracked my can already!

@vernonsteinkamp1088 4 жыл бұрын

Nice concept. I would have liked to see how you attached to the planner. Also its seems like you would want to have a tight seal at the garbage can lid for maximum efficiency.

@TheCrawlspaceCraftsman 4 жыл бұрын

I use 2.5 Rubber couplings I got from Lowes. I might do a video on this alone in the future because its a great way to quick change the hoses to different tools!

@JohnHessGA 4 жыл бұрын

Great video, very helpful... a bit of a loooong intro

@TheCrawlspaceCraftsman 4 жыл бұрын

Yeah..... is Should have not added my second intro.... agreed!!! Thanks for watching though and the feedback!!!

@wolverine1694 6 ай бұрын

I did something very similar with a 6.5 hp vac... works great and saves filter... great video and God bless

@TheCrawlspaceCraftsman 6 ай бұрын

Awesome!!! Thanks for watching!!!

@marbleman52 5 жыл бұрын

Hey there...I I came from your Bauer planer video comments and I said I would check out this dust collector system. I tried something similar to this a couple of years ago. I bought one of those Cyclone funnels and attached it to the top of a trash can like what you have. When I turned on my 16 Gal Ridgid shop Vac, the trash can's sides got sucked way in, and all but collapsing the trash can..wow..!! I put some wood cross bracing inside the trash can and it still sucked in around the cross bracing. Darn...apparently my 16 Gal. vac is just too strong....so you are correct...the shop vac doesn't necessarily have to be a great big powerful one. Now if I had a heavy duty container like those blue ones, or if I made my own plywood container...(wouldn't necessarily have to be round...I think)...then I could use my shop vac. And definitely...I don't have a big budget and need to keep costs down. I also must make a fine dust filter set up...should have done it years ago. I have seen many YT guys taking a simple box fan and basically putting a filter of some type on the intake side. I do a lot of sanding so I really...really...need to solve that problem. Thanks for your video...you are a family man and seem to really enjoy and love your family. That is fantastic...!!

@TheCrawlspaceCraftsman 5 жыл бұрын

It’s funny say this comment! My trash can sucked in last night and cracked.... again!!! I went on Facebook Market place and found a guy who is selling 55 gallon drums for $15 each!!! Much much stronger! Can’t wait to get it! I might do a recap video too. Thanks Marbleman!

@chrisinman237 5 жыл бұрын

I made one of these with the same concept idea, and came to this video with hopes to find a solution for the trash can collapsing. Mine was a Brute, grey can from Lowes and my 6hp vac destroys it. Have you since figured out a solution??

@randy-yk1yk 5 жыл бұрын

I use a resealable 40 gallon plastic chemical barrel (Amazon). Works perfectly.

@kennyfox5566 3 жыл бұрын

Made one myself....works like a charm.

@TheCrawlspaceCraftsman 3 жыл бұрын

Awesome!!! Thanks for watching!

@TylerHarney 4 жыл бұрын

Thank you!! I will use this for my shop!

@TheCrawlspaceCraftsman 4 жыл бұрын

Good luck Tyler!

@donlute3444 4 жыл бұрын

These types of dust collection is fine. I made one similar and does well yet there are improvements that can be made that reduces the amount collected in the vacuum. Oneida (a bit spendy), makes a system that, the head alone, is awesome. But that all depends on what you are after, alot, a little, or cheap as can be. But then how often are you cleaning the vac filter?

@just-dl 5 жыл бұрын

Love it!

@TheCrawlspaceCraftsman 5 жыл бұрын

😁 Thanks D L!! I thought you would!!

@A6Legit Жыл бұрын

The shop vac usually ends up with all of the super fine particles clogging the filter. It doesnt normally get many wood chips unless your collector bucket gets too full

@TheCrawlspaceCraftsman Жыл бұрын

Exactly! Thanks for watching!!

@JMAAD 5 жыл бұрын

looks exactly like the houses in my neighborhood Lexington Plantation in NC

@TheCrawlspaceCraftsman 5 жыл бұрын

Could be the same builder. They’re pretty big co. One 27 Homes. Thanks for watching!

@gtguice 3 жыл бұрын

nice and easy to follow great video. just built this and my can keeps caving in from the suction. did you have this issue also? if so how did you fix. thanks.

@TheCrawlspaceCraftsman 3 жыл бұрын

Yes I did. I think the cans are a little soft and too playable.... I had to get a thicker can.... try a metal can too!!! Thanks for watching and Subbing!

@airborne2303 5 жыл бұрын

Great video.

@TheCrawlspaceCraftsman 5 жыл бұрын

Thanks man!!! Hope your getting to feeling better!

@phenylpyruvicoligoph Жыл бұрын

Add a small baffle to the pipe at the center of the lid and pretty much nothing will get to the shop vac

@TheCrawlspaceCraftsman Жыл бұрын

Good idea!!!

@gerrys6265 Жыл бұрын

Thanks. Still seemed to be a lot of dust int he filter. Figure out a way to keep more of that tin the trash can?

@ronalves9118 4 жыл бұрын

Good job, my only comment is the filter on your shop vac got plugged up with all the fine dust that should of stayed in the large garbage can if you had placed a plate in the top on the can. I forgot the name of the plate but there are several other videos out there showing how to add that plate to improve your fine dust collection.

@paulsylvester1394 4 жыл бұрын

Ron Alves I believe you are referring to a Thein baffle. Check out Stumpy Nubs and others. I would consider using a metal can or a Rubbermaid Brute heavy duty can. I prefer frugal over cheap.

@garyrigard5229 4 жыл бұрын

what about all the fine sawdust that was stuck to the filter that you didn't mention

@TheCrawlspaceCraftsman Жыл бұрын

It’s not 100% effective if that’s what your asking.

@coplock6689 7 ай бұрын

nice job. i wonder if a piece of screen on the pvc that leads to the vac would eliminate all the dust going into shop vac?? great idea either way. thanks

@TheCrawlspaceCraftsman 7 ай бұрын

Thanks so much! Unfortunately I don’t use this system anymore. I’m planning on doing a new system in my workshop soon!

@A6Legit Жыл бұрын

Ive been using the dual 5g bucket dust separator but I think I need to up my game to something bigger.

@thomassladek9437 6 ай бұрын

I think the pipe you are using is actually ABS and not "black" PVC. The difference would be important if you were to glue the fittings to the pipe, because the two plastics use different cements. With friction fits such as you are using, IDM.

@TheCrawlspaceCraftsman 6 ай бұрын

You are correct my friend! I was using the wrong terminology!

@ralphseidler8893 4 жыл бұрын

Wow dude that’s fucking awesome job . I was going make one for a 5 gallon bucket . But I have a trash can like yours that I’m gonna make it out of.

@rubenreynaga1572 4 жыл бұрын

Is it my imagination or your filter in the vacuum got completed clog, does it suppose to do that

@Marcello1b Жыл бұрын

I have an exact planner but the color. I tried the same thing and...it stocked. The engine forces but I shot off it right after. This mean the motor is good but it needs a serious saw dust cleaning. I made a wood-fanal but the suction wasn't strong enough. So, be careful to get a proper suction.

@TheCrawlspaceCraftsman Жыл бұрын

Thanks for watching!

@dadams19111 4 жыл бұрын

Thank yuo!

@ltweight98 2 жыл бұрын

Could this be made for a sander for sanding furniture? And what would you do differently, maybe use a second hose instead of a PVC pipe from the sander to the trash can? I am refinishing furniture and winter will be here soon so I would like to be able to do this inside. Thank you. Jackie

@TheCrawlspaceCraftsman 2 жыл бұрын

Personally I’d get a cyclone and add it to the top of a lined trash can! You can get them from $30-$150 on Amazon!

@albertifergan6506 4 жыл бұрын

Thank you

@TheCrawlspaceCraftsman 4 жыл бұрын

Np!!! Glad ya liked it!

@willietharp9092 5 жыл бұрын

Think it could be used to suck up a small area of attic insulation if it had a hose instead of the PVC you have to the saw?

@TheCrawlspaceCraftsman 5 жыл бұрын

Maybe a really small section of Blown Insulation. Depends on the size of the container your using too. I would suggest go online and look for a 60 gallon plastic container with a screw on lid. Super Rigid and large too. Good Luck and thanks for watching!!!!

@brandons8706 5 жыл бұрын

Great idea, one question on the dust collection mounts. What kind of attachment did you use on the planer to capture the dust? I have seen some generic vacuum pieces but nothing like that.

@TheCrawlspaceCraftsman 5 жыл бұрын

I got all the parts at Lowe’s. It’s all Black PVC pipe and the rubber connector as well. I would recommend looking in Facebook marketplace for a 50+ gallon plastic drum. Much more rigid then the trash can and will cost the same if not cheaper! Thanks for watching!

@brandons8706 5 жыл бұрын

@@TheCrawlspaceCraftsman I was referring to the plastic parts at the tool for collection. Where the dust is collected on the machine?

@shaynesabala 2 жыл бұрын

Use a hose to go to you machine. No Idea why he used pvc for that. Watch Chris Notap video on how to make one. It works a lot better than this one.

@ScottMoreauAZ 5 жыл бұрын

What if you made another one, Daisy chain them together. Would that further reduce the amount of dust in the vacuum? Just pick up a planer yesterday. DeWalt DW735 and it has a blower on it for "fan assisted chip ejection". Definitely going to be building this

@TheCrawlspaceCraftsman 5 жыл бұрын

Dude you got a Mac daddy planer!! I don’t think you can daisy chain the containers. Look on Facebook Market Place for large plastic 55 gallon drums. Much more rigid than a trash can.

@bryonweatherford1772 5 жыл бұрын

That's not exactly how that works. The stuff that gets by the collector is likely going to get by the next collector as well. Its the size of particle that has a 50/50 chance of getting collected or passed through. Added more will just decrease your airflow.

@mikeledee8786 Жыл бұрын

I would think the crash can would collapse under pressure? Also the sides are not airtight. What brand of trash can do you use and do you seal around the pvc coming into the side and where the top meets the trashcan. Thanks,

@TheCrawlspaceCraftsman Жыл бұрын

I don’t use this system anymore but it was “OK”. I highly recommend a quality dust collection system before a homemade one!

@janestewart3231 4 ай бұрын

Would this work hooked up to a mulching blower/vacuum in my yard?

@TheCrawlspaceCraftsman 4 ай бұрын

Ummmm…… I dunno! Would make a great video!!!!

@Zack16Fair 4 жыл бұрын

I have a pretty big trash can and I'm just concerned that my small shop vac doesn't have enough power to suck up the sawdust. I think it's a 2 gallon one or something

@mangibaek7698 4 жыл бұрын

와우 멋져요...

@TheCrawlspaceCraftsman 4 жыл бұрын

Not sure how to reply! Thanks for watching!

@stevegeer3735 Жыл бұрын

Great video. Would be even better if you would list specific items in this build. Not name brands. The sizes, lengths, and quantity of each item, are similar to what other KZfaq videos do. I tried to take a list to my local Big Box store. They wanted to have the above information. It wouldn't take you that much longer to make a perfect video. That said, I am going to follow in your footsteps to make this dust collection system. I like it because it is: DIY, effective, simple, cheap, elegant solution to controlling the sawdust problem. Thank You.

@TheCrawlspaceCraftsman Жыл бұрын

Thanks for watching!!!

@jeffglover4006 2 жыл бұрын

Where did you get the hose you are using on the shop vac?

@TheCrawlspaceCraftsman 2 жыл бұрын

Amazon for the win!

@fayiznalu8411 Жыл бұрын

Nice video! Can I use 1 1/4 or it has to be 2 inch , will it work? Thank you

@TheCrawlspaceCraftsman Жыл бұрын

You might be able to but it might be prone to clogging if your using a planner. Probably would be ok if you’re hooked up to circular saw or something that creates small particles! Thanks for watching!!!

@woodtechaes3879 5 жыл бұрын

So I made a dust filter from 3 5gal buckets and the trash can and I run no filter in the shop van and I don’t get any dust in the shop van at all yes I did the trash can like he did then I did a bucket with a cyclone then I have a bucket with water then I have empty bucket to help stop the water vapor making it into my vac I can sand drywall. I have a 20’ hose so all of it just stay in the corner of my shop I all so have a Christmas tree light remote box to turn it on it clips to my belt when I am in the shop working and I just put the hose on my tool and hit the remote then the power on the tool I plan to make a pvc system and just have open the vac gate at the tool no more hose to trip on.

@chiefurag4183 4 жыл бұрын

Make a video...

@TheCrawlspaceCraftsman Жыл бұрын

Yes! Please!

@randyc5650 4 жыл бұрын

Kalindslife, was the filter clean or already clogged when you started?

@TheCrawlspaceCraftsman 4 жыл бұрын

Ummmmm..... I can’t remember!! Wish I could!! Dang sorry!!

@frederickroeder1174 4 жыл бұрын

Try using a plastic 55 gal drum with removable lid large with two large bungs one is fine thread snd will accommodate a 2 in threaded pvc adapter the other bung can be used to regulate the vaccum

@lastchancecris 5 жыл бұрын

I noticed your filter was still full, you have to be loosing suction as you carry along with your project. I understand the concept of the garbage can but shouldn’t it be eliminating majority of the fine dust that clogs the filter in order to be productive ? In my opinion if it don’t keep the filter from filling and essentially loosing suction it’s a waste of $40 because all your doing is separating the large from small dust.

@TheCrawlspaceCraftsman 5 жыл бұрын

No suction lost and honestly it’s too powerful for a normal trash can! It’s job is to collect the shaving and separate dust so it did it’s job as intended. Thanks for watching!! I recommend buying a 50 gallon food grade barrel with a removable lid..... those don’t collapse from the suction!

@lastchancecris 5 жыл бұрын

If you say so but from my experience and every other persons experience we lose suction from fine dust blocking the filter which this machine collected on your filter. You may not have lost suction due to only shaving a single 2x4 but over time as you are continuing you will lose suction. The point of a dust collector is to stop the dust before it gets to the filter. I can tell you I can run my shop vac with my planer, jointer, mitre saw, table saw, and bandsaw and get less then a tablespoon worth of dust on my filter with my Oneida on a 5 gallon bucket. I watch these videos to try and improve what I have but this system just don’t separate the dust from the filter like it should. Try sticking a board or something in the can above the inlet hose with a hole in the center to stop the dust from spinning up the barrel into the vac hose. I believe it will help keep the fine dust away from your vacuum.

@michaels3972 5 жыл бұрын

@@lastchancecris: This would solve the filter clogging: kzfaq.info/get/bejne/oduUfqalxLXJl3k.html

@paulreader1777 4 жыл бұрын

@@michaels3972 Dust deputy is just an expensive version of what he has built. There is no more fine dust collection as a result.

@shaynesabala 2 жыл бұрын

@@lastchancecris He lost suction. My home made system might have a spoonful of dust after using all of what you mentioned all day.

@zkbaseball87 4 жыл бұрын

Hey was wondering if anyone else made one? I just made it and it caves in my trash can every time I cut it on. For the dust issue I added a shop vac filter into the lid build and seems to be doing a good job. Made it where it will come off easy to blow it out when needed

@TheCrawlspaceCraftsman 4 жыл бұрын

You may need add a vent with a filter to keep from collapsing. Mine seemed to do the same thing as the trash can was a little thin. It worked for a while but then that was it. I ended up just buying a WEN Dust collector on Amazon for $100. check out my review video and the link in that videos description. Thanks for Watching!

@dondutra3086 4 жыл бұрын

Probably makes a difference on the size/hp of your shopvac. I have a small one I intend to use in this application, but I have no doubt the bigger one would cave in the can.

@adaptivediyers 2 жыл бұрын

How often do you have a collapse on the trash can?

@TheCrawlspaceCraftsman 2 жыл бұрын

Never…. Because I don’t use this anymore! I use a Wen Dust collector system. Eventually would like a vortex addition! Future video!!!????

@mnight207 4 жыл бұрын

I actually didnt care for the intro. Too long. Luckily we can skip to where the video actually starts and I thought the project was great. Merry Christmas

@TheCrawlspaceCraftsman 4 жыл бұрын

It’s all good man!!! Merry Christmas too!!! Thanks for watching!!!

@chrisfield5506 3 жыл бұрын

Wow yeah , not just the garage door or even the theme song...3 minutes of extra stuff before the video actually starts.

@WinningTrades4U 3 жыл бұрын

We don’t give a damn about what you like and don’t like. The opening was the most epic most mind engaging and most cinematic thrill of a visual experience I’ve ever seen in my entire existence. You need to take an extended amount of time to go reflect on your opinions, interests and how you speak out of spite and self centered egotistic narcissism. U disgust me. @kalindslife Ignore this DunceCap Wearing Bozo Clown

@chrisfield5506 3 жыл бұрын

@@WinningTrades4U whoa chill, it's ok to express a dislike for what someone does. That doesn't make you self-centered. I thought Midnights & Mornings did it in an extremely graceful way.

@stevenking997 3 жыл бұрын

and a whole year later we all actually still dont care for ur comment , luckily ur opinion STILL doesnt matter.

@SK13SFS 4 жыл бұрын

The whole idea of these DIY Dust Collectors is to drop out as much of the fine particles before the filter of the vacuum device, which this unit did not appear to do.

@scottydntno 5 жыл бұрын

I can't use a plastic trash can. The Ridgid Shopvac i have makes the trash can collapse in on itself LOL

@bryonweatherford1772 5 жыл бұрын

Buy another can exactly like the one your using. Place your dust collector trash can in side it. It will prevent the trash can from collapsing by supporting the inner can on all sides. Worked for my 5 gal pail system.

@banjoeypicks 5 жыл бұрын

good job man. I like a neat shop without all the cleanup. this just might work for me as well, thanks

@TheCrawlspaceCraftsman 5 жыл бұрын

Thanks Joe!!! Now that summer is starting to break I’ll be back outside doing more projects.

@gallowayphoto 8 ай бұрын

Can you use a 50gal or not enough suction?

@TheCrawlspaceCraftsman 8 ай бұрын

Yes! You can!

@gallowayphoto 8 ай бұрын

Do you have a list handy of all the parts?

@TheCrawlspaceCraftsman 7 ай бұрын

Unfortunately I don’t have this set up anymore so I don’t. Sorry about that!

@csababone717 4 жыл бұрын

Hi ! How strong is the vaacum cleaner ?!? (Watts) :)

@TheCrawlspaceCraftsman 4 жыл бұрын

its a pretty strong vac and really sucked in the can. I would eventually upgrade to a metal can or steel 55 gallon drum and put it on castor wheels. you can find drums all day long on facebook marketplace from $10-$30 all day long!

@doughaber3330 2 жыл бұрын

The cracked trash can was the best part.

@TheCrawlspaceCraftsman 2 жыл бұрын

Cracked dat sum bits real quick! 😂 I’ve upgraded but was a fun video to make!

@jeandeverchin8774 4 жыл бұрын

Hello, très bonne Idée

@TheCrawlspaceCraftsman 4 жыл бұрын

Thank You!!! (Merci!!)

@broceanstate6309 3 жыл бұрын

Thanks man I might try this. Also, anyone ever tell you that you look like Dave Attell?

@TheCrawlspaceCraftsman 3 жыл бұрын

I think someone said I do before! LoL thanks for watching!

@westcoastbassman Жыл бұрын

completely off topic.....your American flag is displayed incorrectly. When hanging vertically, the blue field shall be to the FLAGS right / to the left as viewed. Love the video, I plan on making one of these!

@TheCrawlspaceCraftsman Жыл бұрын

I know. So the 50 state flag is wrong on my part but the Susan B Anthony flag is an error I got for free as it was printed in reverse so there was nothing I can do as it’s the same on both side. Alot of people mentioned that to me. Lots of observant people! LoL Thanks for watching!

@karls6802 4 жыл бұрын

I assume the lesson learned on the three minutes talking head intro...anough said. The second issue, you need in a 'Show-n-Tell' to show all of the parts in the project. It would have been helpful to see the Vac inside and the filter before you planed the wood, always good to have a before and after comparison. I enjoyed the idea behind your project. I want to thank you for your efforts and best of luck in future projects.

@TheCrawlspaceCraftsman 4 жыл бұрын

Great feedback Karl!! Thank you!!!

@patricklandis3910 3 жыл бұрын

Looks like your filter loaded with dust which clogs and lose suction..

@zippercat136 4 жыл бұрын

This is a great idea until you find out the trash can lid you have won’t support the pvc and connections thereby not keeping them upright. It was just too heavy for what seems like a flimsy lid. Trash can same size and from Lowe’s though I suspect there may be regional differences in products for sale. So either I trash this - no pun intended - or I test the strength of the next trash can lid before I buy another can.

@TheCrawlspaceCraftsman 4 жыл бұрын

After this build I would suggest going online and finding one of those heavy duty food grade barrels for like $20!!! Facebook Marketplace is a great place to find out them!

@percyfaith11 2 жыл бұрын

Well your shop vac filter is clogged. The whole point of the exercise is to prevent that. There is too much fine material getting through the cyclone unit.

@TheCrawlspaceCraftsman 2 жыл бұрын

Thanks for the input!!! Thanks for watching!!

@JessyRenae 4 жыл бұрын

What planer is that?

@TheCrawlspaceCraftsman 4 жыл бұрын

It’s the Bauer from Harbor Freight. I have an unboxing and setup video on it. You should check that out!

@JessyRenae 4 жыл бұрын

@@TheCrawlspaceCraftsman That's what I thought. I have the same one!

@JessyRenae 4 жыл бұрын

Also, I didn't mind the intro. Have you saved any bugs recently?

@2008enzed 4 жыл бұрын

Over 2 minutes of intro, before you get to the meat of the video. Yikes!

@TheCrawlspaceCraftsman 4 жыл бұрын

Have you ever gone to the movies and pay a ton of money’s just to watch two hours before they finally kill the bad guy knowing good ans well it’s gunna happen going into it!? I guess it’s kinda like that! Tubers like to create fun stuff and add to the beginning of the video to make it fun too!!! Sorry if the two minutes bored ya!!! I guess that’s only way I could explain it.

@TylerHarney 4 жыл бұрын

.... Arrow keys on PC double tap side of screen on Mobile

@noah-hy9vh 5 жыл бұрын

U deserve more subs

@TheCrawlspaceCraftsman 5 жыл бұрын

That’s an awesome thing to say! As much as I would love to have more...I’m very grateful for each and everyone! I have a lot of fun with YT and try to put vids that viewers will enjoy! Thanks again!!

@wetspotswimwear1199 Жыл бұрын

Save money, buy white pvc, spray paint it black...or pink for you girls out there

@TheCrawlspaceCraftsman Жыл бұрын

Yeah Black does cost way more!!! I like the way you think! Thanks for watching!

@atheneaesculap7674 4 жыл бұрын

A nerve tattering blah, blah...but the core of this vid is worth the waiting time!

@sdnlawrence5640 4 жыл бұрын

Didn't recognize the brand but your shop vac looked like a short Dalek.

@TheCrawlspaceCraftsman 4 жыл бұрын

Him and I Woodworking gave it to me.... I never looked either. I strictly use it for my chops saw now so its tucked under my work bench. I very seldomly pull it out.

@mrmyblessednest1722 4 жыл бұрын

KalindsLife at 9:54 of the video you can clearly see that it is a Shop Vac brand, 16 gal 6.0 hp Great video! And has far as the intro....let those who have a problem with its length, watch someone else’s channel if they don’t care for how long it was

@careytamboline5028 5 жыл бұрын

Is that not abs pipe and fittings?

@TheCrawlspaceCraftsman 5 жыл бұрын

I think so.... Black PVC is what I called it! LoL. Thanks for watching

@poultonprojects 5 жыл бұрын

Love the opening scene!!!

@TheCrawlspaceCraftsman 5 жыл бұрын

Hahaha! Thanks man! Nothing worse than a rainy day! Kinda!

@poultonprojects 5 жыл бұрын

@@TheCrawlspaceCraftsman it was so cold to!!

@tomstewart5712 3 жыл бұрын

Clean your Shop Vac filter! Prevent motor burnout.

@WiliamBennettwildarbennett 5 жыл бұрын

As for the commentators that are knocking the simplistic idea, tell them to suck their own dust with those high dollar cyclones. Myself as a Garage Hobbyist this will work fine until someone wants unless give me for Christmas. Yes I've seen several that have made homemade cyclones, but they are just as effective as yours.

@hnnnggh Жыл бұрын

concerning number of flags in this workshop

@TheCrawlspaceCraftsman Жыл бұрын

Explain How Please?

@MDD1966 Жыл бұрын

Buy white PVC and paint it black

@TheCrawlspaceCraftsman Жыл бұрын

Definitely Cheaper!

@heemanchalmaharaj6709 11 ай бұрын

already have caught a 30# Blue Cat off of these (going to try to get a 60#+ next year). kzfaq.infoUgkxzXmlErSqVAEGWFEKO530BvTqFDw53QW3 Definitely very strong, and sharp. Additionally, the gap is wide enough to actually hook a fish (not always the case with circle hooks). I purchased the 8/0, but probably should have got the 9/0 (they seem slightly smaller than other 8/0 hooks). Additionally, having the point in-line helps if you drift fish. I have yet to get a serious snag with one of these hooks.

@TheCrawlspaceCraftsman 11 ай бұрын

Thanks for watching!!!

@shaynesabala 2 жыл бұрын

That's not working well. You might want to move the inlet pipe closer to the wall of the trash can and angle it down just a little to create the swirling of the dust so it goes to the bottom. The way you have it here, a lot of the dust is getting sucked up. My guess is that as the dust comes in, the way that it's positioned is throwing it right into the pickup. If you are picking up fine dust that is not as heavy as what you did here the problem will become much worse. I made one out of two buckets and I can use it all day with almost no dust in my vacuum. Lastly, using a good filter (can't remember what they are called right now) will increase the suction a lot. Good luck.

@joebeamer3182 4 жыл бұрын

Your filter was filled with sawdust.

@Narami01 3 жыл бұрын

I don't understand why he's bummed it's nice and cool out????

@TheCrawlspaceCraftsman 3 жыл бұрын

That darn rain!!!!

@dwightfontenot9064 4 жыл бұрын

Why not just hook the shop-vac straight into your tool?

@TheCrawlspaceCraftsman 4 жыл бұрын

You can do that too but it’ll fill up real quick.

@dwightfontenot9064 4 жыл бұрын

@@TheCrawlspaceCraftsman Ok, thanks. It's super quick and easy to empty and I'm just doing small projects.

@TheCrawlspaceCraftsman 4 жыл бұрын

Dwight Fontenot absolutely! If you are using a planner or jointer you’ll empty a lot. I would just aim it at a wall and let it build a pile then scoop it up. Other than that a shop vac is great for small projects!

@lucidhorizon557 5 жыл бұрын

What are you supposed to do with all that dust? Do you just throw it away?

@TheCrawlspaceCraftsman 5 жыл бұрын

Yup. Throw it out. Can’t use pine for animal cages so it’s pretty much trash. It it were cedar it might be good for like guinea pigs or rabbit bedding. Thanks for watching!

@lucidhorizon557 5 жыл бұрын

@@TheCrawlspaceCraftsman thanks for responding. I am new to the wood working scene. Never built anything from wood in my life lol. I have been watching your videos and some others. Great content man. Question.. do I need a planer and jointer or can I wait awhile? Kind of pricey.

@randy-yk1yk 5 жыл бұрын

Compost! 1 layer of wood (brown layer), 1 layer of grass (green layer), repeat and mix once a month. Next year you can fill any spots in the lawn and the stuff grows grass like crazy.

@mikeorjimmy2885 5 жыл бұрын

Use the sawdust in a composting toilet.

@johnawhiting 5 жыл бұрын

Saw dust makes Gr8 floor dry. I do lots of auto work, and changing oil. sucks up the oil spills from the floor! So I save all my saw dust.

@msk3905 Жыл бұрын

Why does everyone think they need an intro to a video?

@TheCrawlspaceCraftsman Жыл бұрын

I stopped. I’m with ya. Thanks for watching!

@aaronbarton3039 4 жыл бұрын

Its called abs not black pvc. Pvc is white, differnt material

@larrycrane6060 Жыл бұрын

No such thing as black pvc that would be ABS

@TheCrawlspaceCraftsman Жыл бұрын

Good call out!

@Nonya855 3 жыл бұрын

*ABS

@TheCrawlspaceCraftsman 3 жыл бұрын

I don't have Abs... I do need to work out more though!! (JK) Thanks for watching!

@Nonya855 3 жыл бұрын

@@TheCrawlspaceCraftsman Acrylonitrile butadiene styrene

@johnawhiting 5 жыл бұрын

Yes, I noticed the filter was packed w/the fine sawdust. Keep running it that way, and your vacuum will burn out in short time. All is not lost however, put a cyclone by oneida, (dust Deputy) on top of the Garbage can and you will see it works much better. Thank You for your efforts.

@TheCrawlspaceCraftsman 5 жыл бұрын

Honestly it’s Too strong for a standard trash can. Got a plastic food barrel for $15 on Facebook marketplace and this works perfect. Extremely thick plastic. And yes... I clean the filter regularly. Thanks for watching!!!

@johnawhiting 5 жыл бұрын

KalindsLife Do you know how long it took Edison to perfect the Light Bulb? Was not over night. I don't think he saw the LED coming however! My Friend, Stay ingaged, and you also will find sucess.

@telmogiraffadealbuquerque4660 Жыл бұрын

Less speech, more action!

@TheCrawlspaceCraftsman Жыл бұрын

I don’t do ASMR! Sorry!

@smicksmookety 4 жыл бұрын

It's too big - you're not getting a great vortex effect, with a proper vortex you'd be getting virtually no sawdust from the amount of milling you did.

@TheCrawlspaceCraftsman 4 жыл бұрын

I've since changed to a WEN Collector. I plan on getting a Dust Deputy soon! Cant wait!

@malthornton9332 4 жыл бұрын

half the commentary would be much better.

@TheCrawlspaceCraftsman 4 жыл бұрын

Sorry Mal!!! Thanks for watching though!!!

@danl.8167 2 жыл бұрын

Wow. Way to much talking.

@TheCrawlspaceCraftsman 2 жыл бұрын

Wow. Thanks for Watching!

@kfhagan 2 жыл бұрын

Cut all the intro crap. I don’t want to waste my time watching your garage door go up and down and looking at your family!

@TheCrawlspaceCraftsman 2 жыл бұрын

In all honesty I make videos like this because it’s actually fun to do! I’m not a huge YTer who conforms. I’m sorry you didn’t like it and I’m ok with that. Content Creator Rule #1: Make videos you enjoy making. There is a scrub and FF button too…. Thanks for watching!!!