Travel Limits,LiftMaster,Chamberlain,Craftsman-Adjust

Рет қаралды 251,611

9 жыл бұрын

This video gives you assistance, and how to adjust info for the travel limits on, Liftmaster, Chamberlain and Craftsman brand garage door openers with the manual adjustment screw. Including belt drive, chain drive and screw drive models all have the same instruction. For close and open adjustments. This is for the location that your garage door stops. These motors have a safety shut off. If it over heats it will shut down for about 15 min. This video does not include the models that have a program button you hold down to set the travel limits.

Пікірлер: 66

@happyjeef Жыл бұрын

8 years ago you made this for me, little did I know. Thank you, big help sir

@Martinthewriter 7 жыл бұрын

Fixed, thank you. My door was closing hard and immediately opening again. A little adjustment and it's all good now. Much appreciated!

@EmpireInk 16 сағат бұрын

Good thinking -making this vid. I was cranking on the chain juts, when i thought “I bet this guy made a video about this thing years ago…” 🤣👍

@rebeccawallace3231 6 жыл бұрын

THANK YOU SO MUCH FOR POSTING THIS LONG AGO! My door was closing then opening. I was just about to call a service but decided to google it! and your suggestion worked perfectly! thanks

@hamad115 6 жыл бұрын

Very simple explanation and direct to to the point, Thank you for the great helpful video

@ruelpanganiban5864 9 жыл бұрын

Very good news....garaged opener is now good as new......it is the travel switch........replaced it.....adjusted the travel unit and its now working great........once again......thank you......

@rotfan77

Thanks so much for making this video I didn’t know how to adjust the garage door and it was stopping short of closing completely. I was playing around with the power adjustments in the back and not looking on the side. Thanks again

@pongmetboyd1051 7 жыл бұрын

Thank You very helpful for adjustment on the LIft Master Chamberlain. I got it working again after replace the Cupler.

@AlexG-vb7kp 6 жыл бұрын

OMG. You don't understand how much this helped me. I feel so silly now. Thank you so much!

@zhmichael 9 жыл бұрын

I was wondering why my garage door would reopen after touching the ground. I just need to adjust the down stop limit. Thank you for posting this video!

@djking8416 9 жыл бұрын

Great help. To make your instruction, you might add (from what I understand), one complete turn of the adjustment screw, equals about 2 inches of travel. In addition, after any adjustment of the travel limit (either way), a safety check must be performed in accordance with the manufacturers instruction, usually using a 2x4 piece of wood on the floor to conduct such a check is all that's needed.

@barrydawg7544 4 жыл бұрын

thank you for your video... my garage door opens and closes perfectly, now....

@RandyKellyJr 9 жыл бұрын

Thank You, Now my garage is all set and runs smoothly.

@canakarxxx 8 жыл бұрын

thank you, my garage broke off the hinge that lifts it up, im not sure if its putting to much pressure on the down, so i dialed it down and no more problems! thanks man!

@MissyThang03 9 жыл бұрын

You just saved this lady $70.00 and a big headache! =)

@LoneStar0912 6 жыл бұрын

All of a sudden the door was ramming itself into the ground and going back up. I googled the problem, found your video, and fixed everything in like 2 minutes. Thanks!