Traxxas Slash 4x4 ultimate, alloy servo saver upgrade.
Рет қаралды 4,574
4 жыл бұрынHi and welcome back to WTF Rc Cars,
I decided to pick up one of these cheap alloy servo savers as an upgrade to the stock plastic part,
The stock part seems very tight and has no way to adjust the tension,
New part fits very well and is a good colour match to the original Traxxas parts that are standard on the Slash 4x4 Ultimate.
Seller i found had this in blue, dark blue, red and sliver,
Aluminum Steering Bellcrank Set for 1:10 Slash 4X4 £11.97
www.ebay.co.uk/itm/RC-Aluminu...
@MrSpartanicus 5 ай бұрын
This is why the rpm front bulkhead is worth it
@chrsmcwtrs 2 жыл бұрын
the stock one works just fine
@ol_verde_bastard664 2 жыл бұрын
Mines always cracks....
@WTFRCCars 2 жыл бұрын
The alloy ones make the steering much more positive and hold up to some heavy bashing
@CSL33 4 ай бұрын
OMG!!! Why are taking half the truck apart to do this? The Slash has a "Modular Assembly" which include three main sub-assemblies. If you look at the black and white parts manual that came with it, you'll see that diagram just slightly passed the middle of the manual. It's just this simple to get to where you have full access to this area. (i.e. ~ 3:40 mark) - Remove FOUR main screws from the top of the chassis. - Loosen TWO screws that go into the chassis that hold down the front stabilizer bar to the chassis. - Remove ONE screw from the steering linkage, the bar attached to the steering horn. - Unsnap the complete front assembly from the main chassis. Literally, in less than a minute.... Surprised you didn't take the rear shocks off as well?! 😉😛
SuperFastRc & ATV
Рет қаралды 4,4 М.
Trax RC
Рет қаралды 104 М.
iftibashir
Рет қаралды 65 М.
Mark Santa Maria
Рет қаралды 60 М.
xunyu
Рет қаралды 1,9 МЛН
Rj Mobile 01
Рет қаралды 15 МЛН