This was very helpful. Actually it's the only one I found that actually helped. Thanks for the great job. 👍

I like the way the motor wires went instantly from straight down to straight up.

Yes i have done this too. Castle motor mamba 2 esc. I toned it down with the software because you will eat diffs if you go full speed. The input gear is the weak spot. Wish there was belt drive diffs.

I like how you are fixing it out side

Great work mate I really look forward to seeing that truck running 😊👍

Love your videos brotha keep up the good work!

Nice job. Can't wait to see how it runs.

Nice clean install

Sweet been waiting for someone to do this it’s same chassis and setup as a revo besides diffs

Great job!

Warren is a great beach, some things to watch for, if you go more power than 4s, with those composite diffs and carriers, the material can warp and you'll have more bearing maintenance (and unfortunately they use pretty small bearings and they can come apart pretty easy). Also, on the esc settings, you'd probably want to keep the startup on the softer settings (especially if you have a particularly torque-y motor), I've twisted the shaft that holds the spur gear on mine a couple of times (once even with the stock 775, lol). Otherwise, just have fun.

awesome video

Goog job. My Summit will be 10 years old this year, and I'm considering a brushless upgrade. You make the process seem much less complicated than I thought it may be. Thank you.

That was a pretty easy swap of motors and ESC . Hopefully it runs without a hitch? KEEP ON BASHING, OR SPEEDING! FROM BARRIE ONTARIO CANADA

I'd be interested to see how a good sensored setup performs in one. Maybe a Monster X and a Puller Pro race motor.

Quick and maybe silly question. Doesnt the esc that comes on summit support brushless? Or only brushed? Thanks

I have a the vxl 6s in mine I run 4s wheelies for days. Haven't broken anything yet. Hoping it stays that way.

Have you tryed to put rustler 4x4 drive shafts on the cheapest slash?

Im curious if the summit can handle brushless when not bashed hard. Part of me wonders if the whole "if you upgrade to brushless shit will break" is due to people bashing hard with brushless

I'm not really wanting more speed but with this brushless setup does it still crawl good with the 2 speed trans and have the torque the 775 had.

I put a max 6 in i have two motors i can ues 1400kv and a 2200kv and can run 8s but it Brakes on 4s im dun running it it's fragile im putting it back to stock and selling it !

Nolan 😱😩 I can not wait for the run show but for now how do you like what you’ve created was it worth it😬😎

Hi, With which motor did you upgrade the Titan775 I've got a Summit as well and I'm interest to know about the new motor, and also is it possible to run with 2 s battery glad to your feedback

Awesome is that how u ran it in your new video?

How many channels does the reciever have? Imma upgrade to MT12 Radio

I converted my Summit last year the same way with no issues. 6s battery 17t pinion 65t spur losi lmt tires. it runs 44 mph.

my summit stock motor overheats when doing high speeds and jumps on tracks even just doing 2 laps, will brushless motor fix this?

Not looking for more speed....its not a Emaxx or Xmaxx. I'm looking for more run-time while retaining the low-speed control. I'm going to go with a Mamba Monster X and a Holmes-Hobbies sensored 1/8th Puller Pro 4274S. It has incredible low-speed control and(I don't know how John designed it to fit in a smaller can)a 1/6th size rotor. It has a calculated 3hp on 6s. I'd never run it on that tho. Even unplugging the sensor wire it's really smooth.

He's gona go ahead.

На какой секунде умерли сателлиты в заднем дифференциале?😂😂😂

Got too much padding underneath that's why it was messing up your chassis

I'm going to say that spur gear is going to be in trouble after 2 or 3 runs.

) 12th me