I can't tell you how long I've looked for a video or anything to show the complete steps on how a boat loader works plus engine storage and set up. Awesome video and even better people

Love your videos. In severe lock down in Victoria your family are wonderful you are doing a great job

Beautiful. Love the ocean, beaches, fishing, your patience explaining, you interacting with your kids. Best life for your kids. Hope to travel to Oz soon 👍🇨🇦

Beck’s you’re gonna have to start calling him Gadget 🤣😂🤣 👍🍻

yep Justin, this is one of the better set ups I have seen

You’ve solved the ultimate problem of what to tow. Now you have both!! Looking forward to seeing some good fish in future episodes

This is an excellent video. Thanks for going to the trouble of showing us your setup. You have done a great job with this setup.

flicking a few lures around in the sunshine sounds so much better than a stage 4 lock down. At least I have permission to work still. Defence contracts never end.

The trailer, the boat, everything -- that's life bud. I also love your aerial shots and the moments you guys stepped in that boat. That electronic pivot is pretty amazing as well. Thanks still, though I'm super jealous lol.

Good modern appliances. Have fun.

Another great Vid mate, my dad worked for the Marine division for the Qld government in the 80s and 90s and they bought Stessl tinnys back then as they were the best and still are, My first boat was one cause of what dad told me so you got an awesum little machine there. Oh and c'mon let's C the new haircut under that hat mate. 🤣👍

Excellent!! Now you have given me a whole lot more to think about. Mmmmmm..... good work as usual

I’d love to see your rig including the boat and all your gear go over a weigh bridge

Id be parking the trailer under the boat when it comes down, landing on the trailer. or almost. might save another winch up. looks like it would fit.

Love it mate, all your set is flawless tbh, everything just works and fits well, nice investment for full time on the road. Tightlines 😉👍

Wow! Lot of work but so cool how you transport it.

Weapon of a tinny mate, happy fishing 🤙🏼

Another great video. We didn't catch your location looks smashing there one for our list! He's getting a bit of an inspector gadget Becs :) Keep filming we were getting worried...Take care..Regards Roy & Cheryl (UK)

Hi guys, in two weeks we are going to recreate your FREE CAMPING WESTERN AUSTRALIA | ROADTRIP AUSTRALIA EP.16. Love the content, keep 'em coming. Thank you for the inspiration. 😍😎👍

Good to see you happy with it mate. Now lets see some footage of all the 🎣

Trying to work out why 6 people gave this a thumbs down... Setup looks sweet mate and you said it, absolutely beautiful spot. Happy Fishing!

Great vid, outstanding bit of kit and great setup!

You guys have the best life. Great vid

Thanks again guys love the vid love to catch up for fish someday then we could be shit at fishing together great set up though so from all here to all there dennis

Hopefully we will see you out fishing in country NSW one day 👍. I don’t drink but I think I would sit and have one with you mate lol. love watching all your video’s and can’t wait to trip around our beautiful country like you and your family are.

Yeeeew🤙🏽 need to do some more 4wd vids

How awesome is this

You guys are living out my dream :P I wish you a great jurney.

Justin, you may like to consider placing a small piece of 12ply between the motor and the transom. Steel screwing into alum can cause probs down the road. Just a thought from an ex truckie who has a thing about metal on metal, I claim no expertise and am happy to be corrected if my idea lacks merit. Only a minor thing Seriously good looking rig btw!

Mint set up mate. And another great video. Tight lines 🤙🏾🤙🏾🤙🏾

Awesome vid as usual, wish I was doing the same thing myself

Hey love it and your system system works great, but might I make a suggestion you install a swing out boom on rack to lift the outboard and set on the boat using the winch, would be a great back saver and nothing worse than injuring your back while on vacation. And hey was thinking also if you strap trailer to the boat you could flip both over in one go! Cheers from Ontario Canada and good luck fishing. :) Andy

Hi Justin buy some soft plastic vibes & try them out fish love them also i have just started throwing around some metal vibes they work well enjoy life you have a great family life stay safe & well.

great vid mate

another great vid nice setup

Hey Justin, love your videos, You have done a great job

I reckon you could have dropped the tinny straight on top of the trailer when you were getting it of the roof. Love your program, keep up the great videos and information, thanks 👍

She flys mate👍

It looks great just chuck some pool noodle on your ladder and you can get rid of that other gadget failing that you can just put some of that blue nylon on your transom and it will just slide down your ladder keep the videos coming

Lefty loosie righty tighty 😂😂 that’s so good

so simple and so organised. hehe..

Hey Justin, well done. Brilliant. I am keen to know the vertical clearance you have on the canopy door to squeeze the outboard through. I am thinking of doing the same thing for a mate and that trolley in the canopy is just next level. Keep em comming mate.

you will be the best fisherman now you're throwing a few Redemption tackle soft plastics around!

Cool set up now where’s the fish (if you can’t lift the motor you can’t have any fish)

So jealous of your life 👍 living the dream 👍

I remember seeing your recent "Bare Boat Charter" up in the Whitsundays so maybe it's time for a transition to a "Blue Nomad" and start a new series of adventures. You won't look back.

Hi Justin, I have the same tinny. I had it custom built last year by Alf Stessl in Geelong to use as a roof topper. Alf is the father of Tim in Queensland. These are great boats. I purchased two Tracwedge sideport gunwale mounts for my tinny after watching your videos but they won't fit in the gunwale. I thought looking at your video they were the ones. Can you advise what you have used. They look like very good products. Thanks

The Tohatsu MFS20 is even lighter again than the Mercury, by 1.5kg, I would suggest a safety chain on that engine too, seen plenty loosen up on the transom & jump off,

Siiick🤙🍻

Hey Justin, Im a noob when it comes to boats but Ive been toying with the idea of a tinnie for a while Im keen on your set up. Any chance you could slide a how you connect the fuel to the motor and if it needs priming and stuff into a future episode? Only if you remember mate. Love the content

Love it.. can't wait to see some more fishing and then the wife jokes that come after about who's the better catch. Any whistle at 110k's up the highway?

Gidday Justin, i have exactly the same tinnie as you guys and i'm struggling to find the correct RailBlaza Gunnel fitting, any clues mate as to the correct part no. The supposed TracWedge does not fit the C shaped gunnel extrusion. Keep up the good work - Cheers Doug

Have been following your vids all the way, love them. Shows off the beauty of our country and explains so much with fun & humour. Beautiful family. We have a basic LC 200 and, thanks to this vid, are looking to get a rooftop tinny. By the way what type of drone do you use?

Hi, I want to see the first fish you caught in the new tinny. Cheers Meggsy.

Hey Justin What esky do you have in the boat and how is it secured to the boat cheers mate Ps just bought the same set up can't wait to get it 👍

Thanks Justin! You showed the starport l think you said holds the esky in what’s holding the other side may l ask?

Any chance of showing us how you get the trailer on and off the van? Cheers

I really wanna have a good look on the roof rack hey

Gday mate! Enjoying watching your adventures, just wondering where you got the tool roll from. It looks good

Just wanting to know what make and size winch you are using?

Great video. Can you lower the boat directly on to the trailer? Can you load the boat on to the with with the trailer attached? So the trailer becomes lying on top of the boat?

Got the new 15 mercury,dam heavy thing,was wanting a 2 stroke but like ya said,none available.

Great set up, works for you which is the main thing! With the sounder/jump starter - how do you find your set up? I imagine you have the wires from the transducer/power cables hardwired in the tinny and then just plug in the finder and jump starter when you want to use it? Do you find the transducer gets in the way when removing the tinny from the roof? Would be expensive to snap off haha. Hope you're enjoying SA!

Love the video guys, wondering who flies the drone as you both are filming the boat video? seen this a few times, if its one of the kids thats great.

Hey mate great vid, what was those storage bags next to driver seat? Thanks.

Great setup.... can i ask where you got that Jump Starter pack.... brand and model???

Great vid! Are the sides high enough for use in the NT around crocs?

nice rig but why not put a bracket on your bull bar just 2 bars with hooks lay the trailer across strap it and assemble it on the beach easier esp if the tracks rocky or bad just saying

Really enjoyed the video. In the process of purchasing car topper at the moment but it'll be going on a 200 series wagon. Any photo's anywhere on the roof rack/roller setup? Thanks

Great videos if it’s not a secret looks like a great camp location . We doing a beach camping trip up east coast over next couple of months. I will understand if you can’t share camp location.

Killing me mate. 0 degrees in Hobart.

Can you take the boat off the ute and put it straight onto the boat trailer without having to double handle it and re winch it on to the trailer

Unreal setup. Very Jealous. I have a question about the starport that holds the eski in. What is the 90degree piece that is attached to the eski called? Cant seem to spot it on their website! Cheers

Hey Justin, How do you tie the boat to the roof rack?? i dont see any straps going over the tinny?

Great set up and review....how does it handle the chop? And would you consider a bimini for hot days?

Hey mate love the new tinny , looks awesome on top of the 200, just wondering what brand your black hat is? Cheers

Hey Justin. Your sounder looks like it sits solid. What did you secure it to the seat with so you can remove it when it goes on the roof? Is that railblaza also?

Hey bud what is the measurement of the outboard laying flat on the Almac outboard slide laying down in the canopy Floor to top of motor cheers Mint set up

Hey Justin I have a Top Tracker and tried fitting the Railblaza fittings to the rail. No luck they don’t fit and when I asked the store they looked on the Railblaza site and they state that they don’t fit the Mako Craft Top Tracker. Did you modify the piece that fit inside the rail? Thanks mate

Hey mate, excellent video. just wondering if you knew what clearance you need in your canopy to run your motor on the almac slide? thanks

Nice video mate but where do you store your net, fuel tank, anchor etc when traveling?

Do you have a spare fuel tank or you don't really go too far to worry

Hi Justin, just a question wondering if you can lower the tiny down and straight onto the boat trailer. Is that possible at all. Thanks. NATH

Why don’t ya lower it straight on to the trailer 😎nice setup enjoy 👍✌️

Justin looking for a folding boat trailer I noticed you brought a almac how did you make your decision on what trailer

How goods the rail blaza gear

Gday, I bought some railblaza gear (trackwedge starports) to fit on my mako craft 376 topper, but they wont fit inside the gunwhales! Just curious if you had to customise anything for them to fit? Cheers

Hey Justin just wondering how you clean the salt water of the boat/motor before you put it back on the roof racks??

Hi Justin, great vid! Hey I also have ordered a 376 for roof topping. I ordered the casting platform too but am thinking of cancelling it before it goes into production due to weight. Can I ask your thoughts if perhaps the casting deck would make it too heavy. I also optioned black ops package, rear boarding step, front electric motor mount and starboard side pocket to mount the sounder on. Thanks again

Awesome run down! Just one question, do you only use one clip/attachment to keep the Esky in place or is there another attachment somewhere, just wondering how stable it when loaded upside down on the roof? Thanks

An excellent video! What a versatile, cost effective setup. Absolutely fantastic. Did I hear you correctly? $8K for the base kit - boat/motor?

Any idea what beach this is?? We appear to be talking to ourselves :(

How did you secure the esky and i want to do something similar with a pelican storage box?

Cant you just lower the boat directly onto the trailer?

Buddy what are you doing wrong ...should have got a boat full .. bit more info on using the jump starter to run the sounder would be great and affixing the Eski must be more than one star port ? Try using some vibes over rubble bottoms - reach out to Ryan Moody on using your sounder or Mr Sonar

C'mon mate. Frothin' for a catch & cook now

Hi how did you make the rail blaza side ports fit they are to big for the channels on my makocraft unless i cut a section out

Hey guys, this question is a little late but what mounts did you use to mount the esky! I’m looking for a way to mount mine right now

Hey Justin, what is the brand of sunglasses you have on in this video. Is it iconic?

Hey Justin, just wondering what rooftop campers you use or recommend. considering buying one but don't know which one is the best option