Triumph Bobber Black New Rage Cycles Fender Eliminator and 360 Turn Signals Install

Рет қаралды 65,288

4 жыл бұрын

While I am embarrased for you to see the dirty condition of my bike, it is winter in Buffalo, so I am not really able to five it the Full Fillingham before I try to do an instructional video. I swear I will take care of it once the hoses unfreeze. Installing the New Rage Cycles Fender Eliminator kit which removes your rear turn signals and break lights and replaces them with a smart looking under the seat LED Strip. Also replacing the stock front turn signals with the New Rage Cycles 360 Turn Signals to clean everything up and reduce the foot print of my lighting system. Beware, the instructions for the kits leave a bit to be desired, but that seems to be par the course for 99% of things I've purchased for this bike so far.

Пікірлер: 53

@diazea4294 7 ай бұрын

Great video! Thanks for creating this, the instructions are definitely light on details.

@AndyHiepVu 3 жыл бұрын

what a beautiful fender eliminator. Best lights ever

@silversrt4ken 3 жыл бұрын

Thanks for the vid. Looks good front and back.

@mooseass1753 2 жыл бұрын

what a ton of work !

@blommotoren7341 3 жыл бұрын

Cool video !!

@AugustoJNNeto 4 жыл бұрын

Nice to see a recent video on this setup! Getting a Street Twin next month and really considering the 360 signals on the front forks and fender eliminator NRC combo. Any thoughts on making a review video after 1 month use?

@EdA-dp3nk 3 жыл бұрын

bill thanks for sharing

@ianlaishley1770 3 жыл бұрын

Just thought its worth mentioning that you should use metric everything not imperial hex drives. Might be close but they will strip at some point.

@drevil4454 2 жыл бұрын

My dude I agree. I alsoseem to mess up bodywork. It sucks. I usualy send it in for cutting.

@___Mad_Hatter___ 4 ай бұрын

Just curious, on the swingarm license plate, the small light on it, what does that cable connect too, havent been able to light up ?

@R3RLEE 2 жыл бұрын

Nice job and great mod!

@fuadvahdat3583 2 ай бұрын

I ran into the same problem with the same fitment issue. Can you tell me how to raise the skid plate to make the holes line up on the bottom please? I can't find any videos that demonstrate how to do that. Thanks.

@menahanna7692 3 ай бұрын

I'm having a hard time getting the screws all the down over the triumph logo. Any tips ?

@arot2238 2 жыл бұрын

May I ask if you had to use a dual-load equalizer (from NRC also) to slow down the flashing of the turn signals or was moving it to Type 4 enough? Thank you.

@damnitface77 2 жыл бұрын

For this bike moving it to type 4 was enough. I wondered if maybe the issue people were reporting was something that only happened on the standard bobber models, but I never bothered to look it up.

@arot2238 2 жыл бұрын

@@damnitface77 ... thanks for the quick reply. It will save me the cost of the equalizer. 😀

@chich22 12 күн бұрын

Where did you get the side bag from. I'm looking at doing the rear light delete to. Great video, thanks.

@damnitface77 12 күн бұрын

@@chich22 the brown bag is from Larosa designs. The link for that is in one of the lower comments. The black tool bag is from a German company. I'll have to try to remember the name.

@damnitface77 12 күн бұрын

@@chich22 here is a link to my video on the black tool bag kzfaq.info/get/bejne/nZNzi7Oj08m8iX0.htmlsi=yO15QtOUkY2xLuex

@chich22 12 күн бұрын

Thank you for getting back to me. Cheers.

@mikep5647 Жыл бұрын

Any chance you can do a video of how you did the wires under the seat? Trying to find the best way to hide the wires coming from both sides or the rear light set up.

@KevOzY Жыл бұрын

Same here, i dont like it hanging under the seat

@KevOzY Жыл бұрын

Did you find a way to tuck the cables away

@stepheneckles2345 3 жыл бұрын

Not sure if I would call it a fender eliminator since it doesn't look like it actually eliminates the fender. I would call it more of a turn signal relocation project. I like this and if I do it I will figure some sort of cap for the end of the fender to cover the holes using the original holes in the fender.

@hurcommunicationinc4488 3 жыл бұрын

Bill I see that you are in NY. Are you in Long Island? I also have a bobber

@damnitface77 3 жыл бұрын

I'm actually on the whole other side of the state in Buffalo.

@TheJerham68 4 жыл бұрын

Where did you get your big brown saddle bag?

@damnitface77 4 жыл бұрын

It's from LaRosa designs. larosadesign.us/left-side-hand-dyed-solo-saddle-bag-for-2016-up-triumph-bobber-with-spare-fuel-bottle/

@RScott-ul3nv Жыл бұрын

Is ur seat from Triumph, or a 3rd-party vendor? If the latter, where from? I have a '22 Triumph Bobber. Thanks.

@damnitface77 Жыл бұрын

It's the quilted brown seat from Triumph with the stock seat pan. The turn signals just screws into the base.

@RScott-ul3nv Жыл бұрын

@@damnitface77 Copy, thanks much. 🙂

@malph65 2 жыл бұрын

Do you have a link for your side bags and fuel bottle holder

@damnitface77 2 жыл бұрын

www.revzilla.com/motorcycle/la-rosa-left-side-solo-saddlebag-with-fuel-bottle-for-triumph-bobber-2017-2018

@TheeGuitarWailingNJA 2 жыл бұрын

We’re you getting fast turn signals with the tail lights ?

@damnitface77 2 жыл бұрын

No it was the same speed as the original. I've heard some people had to buy a modulator for it. But there were also directions how to properly set up the lights from the cluster, I think I mentioned the process but could be wrong. Should be online.

@KevOzY Жыл бұрын

The brake light is 3 wires i see you only wired 2 with the connector is this normaal

@gates916 3 жыл бұрын

Can i ask where you got those bars

@damnitface77 3 жыл бұрын

I just got the Amazon specials. They were 1 inch and just a little height. I might actually go up to a 7-9 inch rise next season. smile.amazon.com/dp/B0838XRCXL/ref=cm_sw_r_cp_apa_fabc_8FGBRZB69Z0JDB0TSGQD

@Vanzanvang 3 жыл бұрын

please share where you got your full conversion kit?

@damnitface77 3 жыл бұрын

smile.amazon.com/dp/B07KCRFV13/ref=cm_sw_r_cp_apa_fabc_GXCDEXEM6V7WE054ZH5H

@damnitface77 3 жыл бұрын

The pic used on Amazon is only the license plate bracket, but the posting is for the whole kit.

@Vanzanvang 3 жыл бұрын

@@damnitface77 Thanks brother! I appreciated it!

@sacabatworks418 3 жыл бұрын

hi william what is the size of your whell rear and fron tire.. thanks..

@smugandtill 3 жыл бұрын

We're can I bye them from for my Bobber.

@damnitface77 3 жыл бұрын

I ended up getting them at Amazon.com. Here's the link. www.amazon.com/Triumph-Bobber-Fender-Eliminator-Cycles/dp/B07KCN5WZ6

@alexandercmyable 4 жыл бұрын

Hi, may I ask how to put that 360 signal lights on the forks? It is barely fit that i’m afraid to break the plastic

@damnitface77 4 жыл бұрын

As long as you bought the right size for the Bobber Black there is enough play to wrap them around. The size for the Bobber Black is a little bigger because they have wider forks and you'll need to make sure you have the 47mm kit.

@alexandercmyable 4 жыл бұрын

William Langer I have made it! Thanks you so much!