Triumph Speed Twin Exhaust upgrade Vance & Hines and X pipe

Рет қаралды 158,547

5 жыл бұрын

In this weeks video I maximize the amazing exhaust note of my Triumph Speed Twin with Vance & Hines slip on silencers and then I add a Tec-Bike parts x pipe Catalytic converter delete. Part of my triumph Speed twin accessories series, I do sounds tests along the way for easy comparison. Wow what a difference it all makes, its a totally different animal now! Enjoy!
Red swing arm bobbins: amzn.to/2RCnrQu
Subscribe here: kzfaq.info?s...
Social Media:
Facebook / / adam.croll
Instagram / acroll80?h...
Full Disclaimer: I am an Amazon Affiliate, by clicking these links it will help me a bit financially, Thanks if you do!!
Camera Gear I use:
Panasonic G85 / amzn.to/2ElYzpF
Canon G7X / amzn.to/2HdUTto
Rode VideoMic Pro / amzn.to/2SvAXnB
GoPro Hero 7 Black / amzn.to/2TfJ3Bb
GoPro Hero 5 Blacl / amzn.to/2SzY8NW
GoPro Session 5 / amzn.to/2VoUzvG
Manfrotto Tripod / amzn.to/2Ekrfzk
Purple Panda Lav Mic / amzn.to/2Kr8Vv0
Lume Cube / amzn.to/2Vp94zs
Riding Gear I use:
Shoei GT-Air / amzn.to/2EBlcIg
Icon Truant ii boots / amzn.to/2TYUSAe
Artlist songs used in this video:
Go Time - by. Oliver Michael
Desire - by. KOLA

Пікірлер: 268

@AdamCroll 5 жыл бұрын

Which setup sounds best?! are the V&H silencers worth the money for their good looks?

@llloralles 5 жыл бұрын

now you should try it without the dbkiller

@thecomedian4967 5 жыл бұрын

Did you have to get a power commander for the fueling or did the motorcycle ecu adjust the fueling adequately enough?... I have the same setup on my Thrux R.

@AdamCroll 5 жыл бұрын

@@thecomedian4967 no power commander, everything I've read says that the ecu will adapt on its own. so far so good!

@scruffy-lookingnerfherder230 5 жыл бұрын

Could you possibly provide the model of V&H slip this is and maybe a link? Thank you so much.

@scruffy-lookingnerfherder230 5 жыл бұрын

Found it! Triumph A9600524 Vance & Hines Slip-On Exhaust Kit

@marvinr5054 5 жыл бұрын

I have the Vance & Hines with the decat X-pip and the bike now runs the way it was meant to. I'm very happy with it.

@truthseeker2587 5 жыл бұрын

Thanks for loading and showing us how it sounds. Incredible difference, great job 🤙🏻

@Ram.Saketh 5 жыл бұрын

Thanks for the mods and the comparo! Loved watching it - thanks for taking the effort to produce this video and all the DIY stuff!

@coleythailand999 5 жыл бұрын

I can understand your pleasure at these mods because I did similar on my T120. Vance and Hines plus xpipe. It isn't much louder but the engine does feel more free and it is more fun in low gears in town. Good job for doing it yourself! I am not so patient ha ha. Keep up the good videos.

@bc67 5 жыл бұрын

Great work. One of the best Triumph exhaust videos I’ve seen 👍🏻

@guitarplayer225 5 жыл бұрын

Thanks for making the video man, new pipes sound great! I'll be picking up a Speed Twin soon, keep up the good work!

@wretchlikeme5321 4 жыл бұрын

I like the stock better!

@220SeaChaser 3 жыл бұрын

Agreed

@viktor187 3 жыл бұрын

Agreed, have to say that Triumph do make good exhaust choices for their bikes. I actually think that Triumph use V&H for their original exhaust?! Correct me if I'm wrong.

@trevorphilips8756 2 жыл бұрын

Yes

@Mujahideen_khinzir 6 күн бұрын

X pipe ruins the 1200 exhaust sound

@tenacity1392 5 жыл бұрын

Stuart commented that the v-clamps were fiddly. (!) I'll say. I ordered a set of real V-clamps but they came too big so after waiting a week I went back into the battle with the Triumph parts. Scraping a bit of gasket ff each on the concrete floor made all the difference. Enjoy your ride.

@iveyfaganjr605 4 жыл бұрын

I will have this bike by the end of the year! Great video.

@corvair140 5 жыл бұрын

Great video Adam. Did the same to my T120 including the DNA filter and removing the snorkel. I will doing this to my speed twin too. makes a world of difference. Just remember when all your mods are done to start the engine without touching the throttle and all to idle till the fan kicks in. Triumph dealer told me to do this to reset adaptions.

@remyg.7788 3 жыл бұрын

I would start to freak out right before the tank removal step 😅 Great job!

@jonathanrath2627 3 жыл бұрын

Beautiful bike, and all of the takes sounded great tbh.

@rickn8289 5 жыл бұрын

First thing I noticed is that you had two days in a row without rain. All our Michigan friends will understand! Pipes sound great!

@ysoslo 5 жыл бұрын

Great video! Now that you’ve made these changes, you may want to consider doing the “12 Minute Tune” for the Triumph 1200s. It made a huge difference on my 2018 Bobber.

@Mr_Banks 2 жыл бұрын

Great video Adam! Yes the new pipes are gorgeous and worth it

@erickrister 4 жыл бұрын

Amazing sound. Thanks for sharing this.. Congrats from Brasil

@colingoldthorpe5918 4 жыл бұрын

I love this Bike it sounds great, I have a Trophy with a Carbon Delkavic slip on exhaust, most likely cut about 20 lb of the bike and the triple sounds madder than hell at about 9000 RPM :-)

@javoproject_javoshop 4 жыл бұрын

Hi, Adam. Thanks for share your VDO.

@johnpoon8 5 жыл бұрын

I have the V&H slip on with a motone x pipe and db killer removed, sounds perfect now!! Added a booster cable, it runs so much smoother at lower rpm's .

@joshchacko7729 4 жыл бұрын

I was thinking if that exact same set up. Would cops in California pull me over and give me a ticket for being too loud, having me change it in the end too? And what is the difference between a booster plug and a power commander?

@uttamjeetsingh7451 4 жыл бұрын

@@joshchacko7729 You have to be diplomatic around cops. Try to go past them in lower revs and refrain from doing anything obnoxious. Pull in the clutch to glide past them silently if you have to. Cops usuy only bother people who are revving unnecessarily or doing burnouts etc.

@richardpearson4248 4 жыл бұрын

Great video fantastic bike. The dealership has now delivered my speed twin 🇬🇧👍

@paveldeveraux2729 4 жыл бұрын

The seat looks more like a civilized this millennium bike,a nice improvement!

@srhintz 4 жыл бұрын

Hodaka pic for the win! Three suggestions: 1. Condor stand. Roll bike in, pop the back or front end up if need be. No fall, no worries. 2. Loctite 3. Torque wrench. I was cringing when you tightened some of those bolts. A little corrosion and they will snap or be marred trying to take loose. That was a lot of work, thanks for the vid. Sounds bad-ass-tastic!

@AdamCroll 4 жыл бұрын

A Hodaka Road Toad was my first introduction to two wheels when I was a child! (My Dads)

@joseluisromero5296 3 жыл бұрын

Good video! I love my speed twin!

@Russia.No1slavarussia 2 жыл бұрын

Stock sound feeling better

@ThePakovia 5 жыл бұрын

3:36 skip to sound test :)

@Chechenzko 4 жыл бұрын

why???? Is funny c'mon!!!

@SeaMonkey137 4 жыл бұрын

I think the best combination is the V&H slip-ons with the baffles out. That decat job is a good example of how a $200 part can cost $700 from a dealer.

@Ron56610 4 жыл бұрын

Best sound with stock exaust

@juanmoreno7883 5 жыл бұрын

Nice job!!

@louv3080 5 жыл бұрын

I thought about the V&H slip-ons for my new Speed Twin. Glad I didn't get them as they're too close to the stock cans although I'm sure withOUT the db killers in they'll be much better. I instead ordered the Remus pipes from the Thruxton and hope to have them in a week or 2. Will take the db killers out for sure. Still up in the air about the x-pipe though. Time will tell.

@heythere6983 5 жыл бұрын

I feel like the stock exhaust sounds the deepest, although higher frequencies will seem louder and you will be heard better. I like the deepest sounding exhausts in general tho, awesome video

@AdamCroll 5 жыл бұрын

Video in the works of me trying it out without the baffles / dB killers. It’s much different now!

@heythere6983 5 жыл бұрын

@@AdamCroll cool ill check it out, I saw a video of someone who put a tec 2-1 on their speed twin and it sounds awesome too

@vinodkamath5510 4 жыл бұрын

Hi Adams nice video I have a doubt I have vance and Hines euro version in India how do u remove the baffle

@robstopforth8982 5 жыл бұрын

TEC X pipe is worth the faffing around. 3 hours with someone who knows what their doing with all the right tools and it’s always the last clamp that fights back. Sounds good even with the standard cans plus a bit of weight saving.

@hockeymann88 4 жыл бұрын

Great looking bike and seat. I know I'm whining but can't we get Thruxton R forks and shocks on this bike? That would be perfect. Also, sounds great. Worthy upgrade.

@robbie7334 4 жыл бұрын

Nice vid Adam loved the way you couldn't wait to open the package, reminded me of my kids on Christmas Day.Realy like your tail tidy can you post a link regards Robbie Wales UK

@Cuzzazbuzz 4 жыл бұрын

Nice video. Seek looking shocking but great insight.

@PEZ1514 4 жыл бұрын

awesome video man! Love the format. Glad you removed the catalytic converter. I own a street twin and removed my cat and its 99.99% the same process. Was laughing at you curse the process out. HAHA I had the same reaction but in the end its so worth it. Also Put a high flow air filter in

@leemarsh6014 4 жыл бұрын

I had British Customs slip on pipes on my 900 Thruxton, couldn't believe the weight saving, are the V&H pipes much lighter.

@brianharrigan8821 4 жыл бұрын

I'm doing custom ss pipes straight to OEM cans ! Cheers

@duanedragon2 4 жыл бұрын

Nice video, thanks. Do you still have your right side can? I dropped my bike and need one.

@vickramsrinivas5799 3 жыл бұрын

X-Pipe with stock exhaust. 👌

@scruffy-lookingnerfherder230 4 жыл бұрын

I'm doing the decat now. HOLY SHIT this is a pain in the ass!

@AdamCroll 4 жыл бұрын

Yes it is, I cut out a ton of swearing in my video! Lol

@bogieontwowheels1903 Жыл бұрын

Well done!! Love that year of tank paint. Do you think that tank would be a direct fit to a new 2023 Speed Twin?

@user-be9sn1or8j 7 ай бұрын

I would like to inquire about the specifications of the graphite gasket for this exhaust. The tail section of my bike's exhaust pipe is a bit loose

@wunder8962 3 жыл бұрын

How much weight did you save? I’m curious if you weighed the slip ons and x-pipe before you put them on and weighed the stock mufflers and cat after you took them off. I went to a Triumph dealership yesterday to look at this exact bike and I definitely think this will be my first upgrade. Also thinking about ohlins on the rear.

@midas61 5 жыл бұрын

Great video other than...Why didn't you take the baffles out before you did the X-pipe and again why not do a sound comparison with and without the baffles after you fitted the X-pipe???

@Mollygower Жыл бұрын

I bought the Tec X-Pipe a year ago for my speed twin. I'm not sure i I should fit it or not. I'm living in Spain and they check emissions here for the MOT (ITV). This means I would have to reinstall the cat every time I get my bike tested. I'm not sure if the time it would take is worth it.

@user-fv1576 3 ай бұрын

Would you take the 2022 newer model speed twin 1200 over the previous 2019 model with an exhaust or suspension upgrade ?

@bc67 5 жыл бұрын

Did you happen to do a dB comparison between the stock and Vance & Hines?

@Aleph1010 5 жыл бұрын

Personally I prefer the deep note of the stock TBH, wonder if there is any real HP difference.

@FredWilbury 5 жыл бұрын

Personally I think the stock pipes sound better.... but then I’ve just put thruxton pipes on mine ..... purely for the look .... glad you like them ....ps get a ramp sir , makes life soooooooo easy ...regards Fred

@gustavgod 4 жыл бұрын

Adam. Did you have to check the fueling after the x pipe? Did you experience any disruption or chnage to the map by triumph ? Thanks man

@antonboiko1773 5 жыл бұрын

Niiiiice!) can u give a link for this exhaust that fit for Speed twin

@mark222b 5 жыл бұрын

How much weight have you taken off your speed twin? Have you swapped out the battery for a lithium one?

@acbike 4 жыл бұрын

Great video. Very detailed and clarifying. Thanks for that. Question about something I am experiencing dow here in Rio de Janeiro/Brazil that I would like to know if you have the same perception. So, here is very hot and engine temperature is some kind uncomfortable. So, did you feel any reduction of engine temperature around the legs spot mainly when the radiato´s ventilators are on? (most sensible on traffic jams). Thank you very much

@AdamCroll 4 жыл бұрын

I could not tell any difference but here in LA I can feel that heat any time I’m in heavy traffic for sure!

@DanRaabecoach2014 Жыл бұрын

What socket did you use for the two engine bolts? Torx?

@maximusmax4557 5 жыл бұрын

Man, that's way more dinkin' around than George did on the Tec Bike Parts video. I'm sort of rethinking doing a decat!

@scottyporter6093 5 жыл бұрын

It's not that hard. Really worth it or I have seen whole new exhaust recently that runs straight over to the other. Lots more money though.

@maximusmax4557 4 жыл бұрын

@@scottyporter6093 I actually did one, using the Motone X-pipe. I'm confident I could do another one in under 2 hours.

@ragaalvea8309 4 жыл бұрын

adam, the stock exhaust is the original from the speed twin? if yes, why the vnh sounds nearly the same with the original one?

@nuirueu 5 жыл бұрын

Sounds epic! I know TEC make cans for the Street twin and they sound amazing and about half the price of V&H ones. Are they doing them for the Speed?

@AdamCroll 5 жыл бұрын

Thanks! As of right now they do not have pipes for the Speed Twin, I’m sure they will eventually though!

@ronaldvangulden7314 5 жыл бұрын

Great video! Sounds good!

@tybeeshines 3 жыл бұрын

@adamcroll I'm curious what's inside the stock exhaust tips? I wonder if you drilled out those rivets could you remove any baffeling or make straight pipes out of them? I have a 2021 speed twin (Not the new 2021), I just got it. I have the xpipe on order. I'm interested in various aftermarket ends, but they're all really pricey. Wondering if you could DIY the stock tips?

@davidmohr4004 2 жыл бұрын

Hi Stephen...little late to respond but if you haven't got that far...I I have a '22 Speed Twin and actually like the stock sound. I like it even better after I took the baffles out. Super easy job on the US model. Once the the tack weld on the retaining screw was ground off with a dremel, the baffles should slide ride out. Mine were a bit to tight to just slide out but i made a little j hook jig that pulled them right out with out having to pry on them...super easy. I am waiting on a Freespirits XL pipe and want to see how it sounds with the decat and the stock pipes without the baffles. Might be able to keep it less expensive without having to buy pipes if the stockers sound good enough without the baffles.

@voznoxx Жыл бұрын

good morning, what size are the screws of the tilting reels. min 1:15 - 1:30

@DEeMONsworld 5 жыл бұрын

nice job, and not too much cussing. I did the same job on a Street Twin, seemed you struggled with different things than I struggled with, but then different bikes.take the baffles out, and hear it roar. Air filter makes little difference, I assume you removed the snorkel? that is a big difference of the two. The adaption just resets the ecu to default, It will adjust by itself over time, just a little more quickly if you run the reset regimen.

@leviefrauim1425 5 жыл бұрын

Dude, I hate to tell you this but stock exhaust sounds the best, IMHO. Glad you like the new set-up though. Ride her vigorously.

@AdamCroll 5 жыл бұрын

Update to the video coming soon with the baffling out / dB killers. Way different now!

@jamesmorrison5632 5 жыл бұрын

looking forward to hearing that

@jj_infotainment 4 жыл бұрын

Is there any way to fit a centre stand ??

@tybeeshines 3 жыл бұрын

Adam, thanks for the video. I see you removed the tank. on the tec-bike website video, they did not? just curious if it was a necessary step to install the X-Pipe? thanks

@AdamCroll 3 жыл бұрын

It ended up being easier for me but yes it seems you don’t have to.

@rantanplanxxx7941 3 жыл бұрын

Very nice seat, is it deeper than the original?

@brandontapia4155 2 жыл бұрын

Where can I buy the Vance and Hines slip on

@DavidParker-jr5bd 4 жыл бұрын

I'm curious about octane before and after the decat, booster plug and exhaust mods. I know the manual recommends 87 but California being what it is, I'm wondering what you run and if you've tried 89 and 91. Any issues? Performance improvement?

@AdamCroll 4 жыл бұрын

I’ve tried 89 on a few occasions and did not notice any difference.

@gregellis7109 4 жыл бұрын

Hey Adam,how about installing the tech bike performance cam to the speed twin. It would be a good project and I would to see what difference it makes to the bike.Cheers.

@AdamCroll 4 жыл бұрын

I will install that some day for sure!

@thejoshhan5813 2 жыл бұрын

Hey Adam where did you get the x pipe?

@shaolin224 3 жыл бұрын

Did you end up smelling like exhaust fumes when you took the x pipe off?

@TriumphBeezaman 4 жыл бұрын

The X pipe decat & stock silencers should do the trick.

@mvoutour 4 жыл бұрын

@Adam Croll Hi, Adam, when you installed the X Pipe, did the bike sounds more raspy to you? Almost like an exhaust leak where the X Pipe connects? I felt around and don't seem to feel any exhaust leaks but wanted to see what you experience was when you installed it.

@AdamCroll 4 жыл бұрын

I wouldn’t describe it as raspy, at least not in an exhaust leak kind of way, I’d say it’s more of a deep visceral bass sound improvement for mine, in my opinion of corse. Everyone’s ears are different though. As long as you can’t find a leak then I guess it’s up to your opinion of the sound, and of corse every slip on exhaust will change it as well.

@mvoutour 4 жыл бұрын

Adam Croll Ok thanks, I will go and check everything again and make sure I didn’t make any mistakes. The throttle is smoother after the additional of the booster plug and this X Pipe, both of which I did thanks to your videos. SC project exhaust cans are on the way. Thanks for the reply!

@joshchacko7729 4 жыл бұрын

What do you think of the Remus exhausts compared to the V&H for the speed twin?

@AdamCroll 4 жыл бұрын

I haven’t heard one yet, I am glad the aftermarket is ramping up and making more choices for us though!

@edsoncarvalho9297 5 жыл бұрын

Nice

@jamesatkins85 5 жыл бұрын

Nice set up. Just fitted the same x-pipe to my speed twin this evening. You mention torquing everything up... where have you found the torque settings for the frame bolts? Can’t find them anywhere. Cheers. 👍🏻

@AdamCroll 5 жыл бұрын

I used thruxton torque numbers 😛

@maximusmax4557 4 жыл бұрын

@@AdamCroll I used an impact gun!

@brianharrigan8821 4 жыл бұрын

Riders ! There is a standard torque scale per bolt size available on the web / dealer . Default your owners/manufacturers shop manuals. Cheers

@foxtrotgolf5698 2 жыл бұрын

3:44 Best sound ever!!!🤣😂😅

@shaungq7915 4 жыл бұрын

Can anybody who has done the exhaust and x-pipe mod share if it affects the fuel economy? Thanks!!

@RobertSmith-bh5cv 5 жыл бұрын

In the final comparison starting at 18:45, the stock exhaust clearly sounds deeper and, at least to me, better. The V&H and the V&H + X pipe have a higher pitch and less refined sound. I'm not against performance mods and if the V&H + X pipe gives you a feel, (you claim it has more torque), that's great. But from a sound perspective, at least from the perspective you shot in the video, stock wins IMHO.

@AdamCroll 5 жыл бұрын

In person it’s better! It’s hard to translate the difference in bass through the microphone to computer speakers or phone 📲 speakers!

@ianh6943 4 жыл бұрын

Adam Croll I have a similar set up on my Speed Twin. X pipe and V&H silencers. What I have found is the there is a lot popping on a closed throttle. Now I quite like that up to a point but feel it is excessive and somewhat spoils the ride. I have fitted a booster plug but find this makes absolutely no difference. Enjoyed your videos.

@Robotrix666 4 жыл бұрын

I've got to ask, how did you get the headpipe (manifold?) off? I can't seem to remove mine for the life of me..

@AdamCroll 4 жыл бұрын

I must have just gotten lucky, everything once loosened came apart very easily.

@olddube 5 жыл бұрын

Why didn’t you put the Arrow pipes on. They were designed in conjunction with the Triumph factory?

@AdamCroll 5 жыл бұрын

So were these, they have a triumph logo embossed on each silencer. I’ve always been a fan of V&H pipes given the choice I’d pick V&H over arrow anyway.

@johnpoon8 5 жыл бұрын

Currently, only V&H are available for the speed twin as oem.

@ashleyreynolds6604 5 жыл бұрын

@@AdamCroll He meant the headers. You wouldn't need an X pipe in that case.

@jamesmorrison5632 5 жыл бұрын

After I put a water pump on my Corvette I think I said the same thing

@fedefede5689 4 жыл бұрын

Great job. I have same bike. But for my you lost only money for that. Ciao from italy

@ericb252 5 жыл бұрын

Which size mm bobbin pins do I need for the Speed Twin?

@AdamCroll 5 жыл бұрын

8mm.

@markjenkins905 5 жыл бұрын

Adam, where did you purchase your rear bobbings from ????

@AdamCroll 5 жыл бұрын

Amazon! the triumph thread is 8mm. here is a link: amzn.to/2RCnrQu

@ericb252 5 жыл бұрын

Main reason for Vance and Hines is the looks but then you didn't give us a shot of the looks difference. Also could you list which tools I need for each job?

@ericb252 5 жыл бұрын

@@MrKdr500managed to do it myself and learned a new skill! What were you saying ?

@v-twinchannel3978 3 жыл бұрын

I’m a big fan of vance and hines exhausts but I’m sorry the stock exhaust sound much better.

@c.g.c2067 4 жыл бұрын

I prefer the stock ones to be honest :)

@michaelmenard 4 жыл бұрын

Where did you buy the Vans and Hines. I can't find them online...

@AdamCroll 4 жыл бұрын

From my dealership directly from triumph.

@jimsbarg 5 жыл бұрын

no need to do the air cleaner the stock filter set up flows more air then the engine can use also you need to reset the ecu start the bike and let idle DO NOT TOUCH THE THROTTLE after the fan comes on and cycles off turn off the engine then your good TEC parts makes a cam that will bump up the hp to 114 it is the same grind that is used for the collector edition thruxton

@atlbikenight 5 жыл бұрын

What is the link or part number to the cam? Could not find it on the website

@jimsbarg 5 жыл бұрын

@@atlbikenight shop.tecbikeparts.com/t/watercooled-performance the USA web site is not very well run this is the UK site but they have said all parts are available in the US.

@ZfrankieJ26 4 жыл бұрын

I couldn’t find the VH for speed twin online, can you provide the site you bought it from? Appreciate it.

@AdamCroll 4 жыл бұрын

I purchased directly from my dealership

@metalmalitia23 5 жыл бұрын

Now that you’ve changed the exhaust and plan to do the air filter what type of fuel controller do you plan to run so the bike is running with the proper AFR?

@sportbikemike 3 жыл бұрын

Did you have to get a tune.... After the x pipe installation

@AdamCroll 3 жыл бұрын

First I did a booster plug, then I removed that and did a ecu flash.

@blakefarinas6170 4 жыл бұрын

How are you liking that Corbin seat? for sure gives it a more sporty look

@AdamCroll 4 жыл бұрын

The Corbin has been good, I switch between it and the stock seat depending on what kind of ride I’m doing. A lot of people see to hate the look of it though!

@aaronwright848 4 жыл бұрын

Would it make a difference if I removed catalytic converter and installed nex x pipe from the other side of the bike? Not the side where the kickstand is.

@AdamCroll 4 жыл бұрын

Im sure that would work, I did have to loosen both sides of the frame rails to give myself enough room to get it out though. So either side should be ok!

@aaronwright848 4 жыл бұрын

Thank you! I don't have a rear stand and I didnt want to put a small scissor jack on the oil pan. Love the videos, keep them coming!

@joshchacko7729 4 жыл бұрын

Would you recommend a power commander if I were to change the air filter too? And what do you think about wrapping the exhaust?

@AdamCroll 4 жыл бұрын

I don’t think this bike needs the help from a power commander, in another video I do change the air filter out for more air flow. I personally hate the way exhaust wrap looks, so I avoid it even if it does lock in some of the heat!

@joshchacko7729 4 жыл бұрын

@@AdamCroll Would you atleast suggest a dyno tune one time if I do the whole exhaust set up you've done as well as an air filter on the speed twin? Also, I'm fine with the looks, but I've heard that wrapping can actually be bad for the bike in the long run. I aim to die old, but still on my bike. Do you know anything abou that?

@AdamCroll 4 жыл бұрын

I’ve never done a dunk run on any bikes, it would be cool to know what’s going on with the performance. Everything I’ve read says the triumphs ECU adapts pretty well on its own.

@MrLuigiFercotti 5 жыл бұрын

How long before we get smog checks for motorcycles here in Cali? Note the work-around with third party shipping just getting the cat delete.

@AdamCroll 5 жыл бұрын

I’m hoping never! Haha it’s probably inevitable though 😫

@glengerdes2447 5 жыл бұрын

Your right. I collect motorcycles. I can see it happening .

@MrLuigiFercotti 5 жыл бұрын

@@glengerdes2447 If you really like to experiment and build you own, you just have to own old stuff. BTW, do you know that when they passed the smog inspection law, it was supposed to be a rolling 30 year window. Yet in 2005 when the 1976 models would roll out of the 30 year window, our lying swine legislators repealed the 30 year rolling window and froze the date at 1975 and earlier.

@brianharrigan8821 4 жыл бұрын

Emission testing has ended for all vehicles in Washington 2020 ! DB issues upheld by individual municipalities !! Speeding enforced mostly by photo ! Cheers