Triumph Trident 660 Evotech Performance Sliders Review

Triumph Trident 660 Evotech Performance Sliders Review | Moto Machines

Рет қаралды 24,114

3 жыл бұрын

Today we are continuing our Triumph Trident Build Series with an review and installation of Evotech Performance sliders! These are excellent additions to your Trident 660 and will protect it from slow speed drops and even crashes. Bodywork is expensive to replace and for a new bike like this you could be waiting months to receive parts. Don't wait until its too late and protect your bike with the best of the best from Evotech Performance!
===========================
Buy Evotech Performance sliders for your Trident at Moto Machines:
www.motomachines.com/evotech-...
www.motomachines.com/evotech-...
www.motomachines.com/evotech-...
www.motomachines.com/evotech-...
============================
TIME STAMPS:
Intro: 0:00:17
Frame sliders: 0:00:50
Axle sliders: 0:02:10
Paddock lifters: 0:02:49
Paddock lifter install: 0:03:54
axle slider install: 0:04:47
frame slider install: 0:06:23
=============================
=============================
Follow us:
▶ Instagram: / motomachines
▶ Facebook: / motomachines
=============================
Moto Machines: www.motomachines.com

Пікірлер: 30

@MotoMachines 3 жыл бұрын

You can shop for your Triumph Trident here! www.motomachines.com/shop-by-bike/triumph/trident-660-2020

@HowardEmo Жыл бұрын

Do you guys have any discount codes?

@MotoMachines Жыл бұрын

@@HowardEmo No, sorry we do not.

@grandtourisbros 2 жыл бұрын

Thank you for this installation video! It’s so much easier to follow than the black and white instruction manual.

@302bikelife 2 жыл бұрын

So glad I discovered this channel. About to purchase my Trident and this channel has been a Godsend. Thank you!

@MotoMachines 2 жыл бұрын

No problem! That's why we make these videos!

@dbcooper7159 3 жыл бұрын

Waiting to see their new tail tidy hope that's on the list. Like the build series on the trident.

@MotoMachines 3 жыл бұрын

It is on the list! We are just waiting to receive it from Evotech Performance!

@akshaypatil3481 Жыл бұрын

Thanks for the detailed video guys. Do these parts fit Tiger Sport 660 as well?

@kendam1204 2 жыл бұрын

Thanks

@jasonbarber2186 Жыл бұрын

No torque wrench used on the engine bolts. Fail.

@darks1973 4 ай бұрын

Wow, what a pain to mount the sliders 😅. Thanks for the video, very helpful. It is possible to get to the left side front nut with a regular 14 wrench, if you remove the lower right screw of the radiator which can then be tilted a bit. Also helps for the right side nut. Who designs things like that ? 🤷🏼‍♂️

@MotoMachines 4 ай бұрын

I don't think it's that bad compared to other installs. The design is beautiful but does take some effort to install when compared to ancient frame sliders with one bolt.

@gdswghdsCjiirwe 6 ай бұрын

Shouldn't they be underperformance sliders? I mean if your bikes on it's side sliding down the road....

@markl823 2 жыл бұрын

Do the Trident 660 paddock stand bobbins fit the Tiger Sport 660? If so, what is the bolt size and thread pitch? Thanks!

@pititchiqui5661 2 жыл бұрын

es el mismo para trident 660 y tiger sport 660 " tweens"

@triumphseekers7582 2 жыл бұрын

Frame sliders install. What size is that driver socket to tighten the bolts? 7min 52 sec

@MotoMachines 2 жыл бұрын

Its been a long time since I've installed a set of these, but I think its an 8mm allen socket.

@jmvarner10 2 жыл бұрын

Which length bolt do I use for each step? I have 4 different bolts

@MotoMachines 2 жыл бұрын

Instructions are available for download via the resources tab on the product listing. Each bolt in the instructions is numbered and shows you which one to use where.

@jmvarner10 2 жыл бұрын

This is impossible. How am I going to line up the nut to get the bolt started on the right side of this bike

@MotoMachines 2 жыл бұрын

You have to go from the clutch side with a long extension holding the nut. That is the easiest way I found to install it.

@doctorrrez Жыл бұрын

I've tried many ways and it's next to impossible to reach behind the radiator into the tube....its a pain as its otherwise a simple fit and now I'll have to take it to a garage!