Triumph Trident 660 Hepco & Becker C-Bow System Review

Triumph Trident 660 Hepco & Becker C-Bow System Review | Moto Machines

Рет қаралды 28,887

3 жыл бұрын

In today's episode of the Trident build series, we review and install the Hepco & Becker C-Bow carrier. If you're looking for a way to carry saddlebags on your Trident 660, then the Hecpo & Becker c-bow carrier is a great option. It is easy to install, comes with all the necessary hardware, and works with all Hepco & Becker c-bow bags so you have a wide range of bag styles to choose from.
===========================
Buy Hepco & Becker C-Bow carrier for your Trident at Moto Machines:
www.motomachines.com/hepco-be...
===========================
Follow us:
▶ Instagram: / motomachines
▶ Facebook: / motomachines
=============================
Moto Machines: www.motomachines.com

Пікірлер: 37

@trailrider1980 2 жыл бұрын

I had these bags on my mt09. They are awesome. Great quality.

@trailrider1980 2 жыл бұрын

These bags are awesome. Had them on my mt09.

@colindeans5972 3 жыл бұрын

They look great.

@scubasteve524 Жыл бұрын

Do these also work with the evotech tail tidy, as well as the top case attachment set up from hepco?

@ylliwdivad3459 3 жыл бұрын

Very nice easy to mount . But BUT it doesn't fit whit the triumph option rear handle and that to bad . A few inch out and the bag will have slip to the rack .😩

@iuliancrisan7352 3 жыл бұрын

Can you ride 2 up with those side bags installed? If yes, does it constraint the passenger in ant way comfort wise? :D

@MotoMachines 2 жыл бұрын

Yes! You can! As far as comfort goes im not sure, as I've never ridden on the back or taken anyone on the back.

@wrathofdiablo 3 жыл бұрын

That's looking very nice. I wish was available in India.

@MotoMachines 3 жыл бұрын

There are Hepco & Becker distributors in India.

@dbcooper7159 3 жыл бұрын

I wonder if this will fit along with the evotech tail tidy.

@MotoMachines 3 жыл бұрын

We are planning to do a video on the Evotech Tail Tidy when it comes in so stay tuned for that. In my experience in the past, sometimes there are fitment issues between aftermarket tail tidys and C-Bow carriers, but that is EASILY remedied with the spacer kits that are available on our website.

@basics2802 3 жыл бұрын

Is there also an solution if you have installed the oem triumph grab bars for pillion passengers?

@MotoMachines 3 жыл бұрын

In regards to keeping the grab bars on with the luggage? It could possibly fit but I can't say for certain. We do sell spacer kits for the C-bow that allow you to move it out away from the bike more. Link below. www.motomachines.com/hepco-becker-c-bow-width-spacer-kit

@basics2802 3 жыл бұрын

Thank you for the feed back and advice with the spacer kit. The spacer Kits has 4 screws / bolts for secure assembling of the c-bow. Unfortunately the main Carrier of the trident has only 3 screws holes for whatever reason. The Carrier you offer for other bikes has 4 holes. Not reasonable for me, or do you recomment assembling of the c-bow with 3 bolts only??

@MotoMachines 3 жыл бұрын

@@basics2802 its a universal spacer kit, so they put 4 bolts because that is what most of the C-Bow kits use. You'll be just fine using 3 of the 4 bolts.

@basics2802 3 жыл бұрын

@@MotoMachines thank you very much Indeed for reply. Great Support!

@RidersCaveVlogs 2 жыл бұрын

I don’t prefer soft bags, is it possible have hard cases if so what is the name of the case and capacity?

@MotoMachines 2 жыл бұрын

Yes it is! There is only 1 hard case option for the C-Bow system and it is the Orbit Side case. Each case is 11L of storage for a total of 22L. www.motomachines.com/hepco-becker-orbit-side-cases-c-bow-carrier

@RidersCaveVlogs 2 жыл бұрын

@@MotoMachines thank you 😊 That’s useful

@chadhock158 5 ай бұрын

Can you do this with the Top bag rack as well?

@MotoMachines 4 ай бұрын

The install? We have another video of the rear rack install.

@scottwittla 3 жыл бұрын

Looks like you have to leave the Pillion footrests on for this system to work? Dang :( I love the way the bike looks with them off

@MotoMachines 3 жыл бұрын

They work both with and without the footrests!

@sindreslettevold9396 3 жыл бұрын

What is the tightening torque (frame/footrest)?

@MotoMachines 3 жыл бұрын

We recommend using the specs in your owners manual. Because we didn't have a torque wrench on hand I tightened it to what I thought would be acceptable. But we ALWAYS recommend using a torque wrench. -Michael