Рет қаралды 26,626
Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ia/1ASHR00106
Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision. This video shows you how to install a new wheel hub and bearing on your 2001-2007 Toyota Highlander.
This process should be similar on the following vehicles:
2001 Toyota Highlander
2002 Toyota Highlander
2003 Toyota Highlander
2004 Toyota Highlander
2005 Toyota Highlander
2006 Toyota Highlander
2007 Toyota Highlander
Tools you will need:
• Pry Bar 1aau.to/oeY/1AXAA00020
• 14mm Socket 1aau.to/ors/1AXAA00015
• 17mm Socket 1aau.to/ors/1AXAA00015
• 21mm Socket 1aau.to/ohI/1AXAA00043
• 30mm 12-Point Socket 1aau.to/oj/1AAST00002
• 3/8 Inch Air Impact Gun
• Torque Wrench 1aau.to/okE/1AXAA00044
• Copper Anti-Seize
• Center Punch 1aau.to/oaP/1AXAA00055
• Hammer 1aau.to/oeU/1AXAA00091
• Wire Brush 1aau.to/obz/1AXAA00079
Subscribe: / @trq
Check out our playlist:
2001-2007 Toyota Highlander 1st Generation: • 2001-2007 Toyota Highl...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.