Buy Now!
New Shock Absorber from 1AAuto.com 1aau.to/ia/1ASHA00399
Shock absorbers help your vehicle stay stable and safe. Signs of worn out shocks are knocking or bumping noises, loose handling, or a bouncy or bumpy ride. The typical service life of a shock absorber is 50,000 miles, depending on conditions. TRQ shocks and struts are engineered to fit your vehicle perfectly. This video shows you how to install shock absorbers on your 2011-2019 Ford Fiesta.
This process should be similar on the following vehicles:
2011 Ford Fiesta
2012 Ford Fiesta
2013 Ford Fiesta
2014 Ford Fiesta
2015 Ford Fiesta
2016 Ford Fiesta
2017 Ford Fiesta
2018 Ford Fiesta
2019 Ford Fiesta
Tools you will need:
• 13mm Wrench 1aau.to/oiq/1AXAA00010
• 10mm Socket 1aau.to/oxY/1AXAA00017
• 13mm Socket 1aau.to/oCk/1AXAA00015
• 15mm Socket 1aau.to/oCk/1AXAA00015
• Bent Nose Pliers
• Locking Pliers 1aau.to/obQ/1AXAA00139
• 3/8 Inch Air Impact Gun
• Gloves 1aau.to/od4/1AXSS00048
• Safety Glasses 1aau.to/ocR/1AXAA00343
• Floor Jack 1aau.to/oju/1AXAA00068
• Pick 1aau.to/ogb/1AXAA00037
Subscribe: / @trq
Check out our playlist:
Ford Fiesta 2011-2019 6th Generation: • Ford Fiesta 2011-2019 ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.