How to Replace Transmission Mount 2010-2017 Chevrolet Equinox

No video

How to Replace Transmission Mount 2010-2017 Chevrolet Equinox

Рет қаралды 24,575

Күн бұрын

Buy Now!
New Transmission Mount from 1AAuto.com 1aau.to/ia/1ATM...
This video shows you how to install a transmission mount on your 2010-2017 Chevrolet Equinox. Like many other load bearing parts on your vehicle, the transmission mount contains rubber bushings for smooth, comfortable driving. And like other parts, the rubber bushings can wear and rot over time. It’s a good idea to replace them when that happens.
This process should be similar on the following vehicles:
2010 Chevrolet Equinox
2011 Chevrolet Equinox
2012 Chevrolet Equinox
2013 Chevrolet Equinox
2014 Chevrolet Equinox
2015 Chevrolet Equinox
2016 Chevrolet Equinox
2017 Chevrolet Equinox
Tools you will need:
• Pry Bar 1aau.to/onr/1AX...
• 10mm Deep Socket
• 10mm Socket 1aau.to/oLh/1AX...
• 13mm Socket 1aau.to/oSr/1AX...
• 15mm Socket 1aau.to/oSr/1AX...
• 7mm Socket 1aau.to/oLh/1AX...
• 8mm Socket 1aau.to/oLh/1AX...
• Trim Tool Set 1aau.to/oq4/1AX...
• 3/8 Inch Drive Ratchet 1aau.to/oSr/1AX...
• Socket Extensions 1aau.to/oSr/1AX...
• Swivel
• Torque Wrench 1aau.to/oBm/1AX...
• Block of Wood
• Floor Jack 1aau.to/opI/1AX...
Subscribe: / @trq
Check out our playlist:
Chevy Equinox 2010-2017 2nd Gen: • Chevy Equinox 2010-201...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 12

@TRQ 2 жыл бұрын

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@boredpenguin Жыл бұрын

6:50 you make it look so easy, I've got the V6 AWD 6T70 transmission and this mount refuses to come out.

@7thsignthenorthcoast146 Жыл бұрын

Taking that fuse box and that wiring off has me intimidated

@sostareci 9 ай бұрын

Wow. Looks easy. I would probably spend 6 hours for that job. Thank you for that video

@chrisclutchturner 3 ай бұрын

No video on my pontiac g5 gt, but the same mount and in a similar location.. unfortunately my bolts (2) to remove the housing out the way are located in a more difficult place. Going at it now though so wish me luck lol

@gregmclaughlin1815 2 жыл бұрын

Please bring back to OG video. There’s a lot edited out that helps with troubleshooting, positioning, removal and installation.

@TRQ 2 жыл бұрын

+Greg McLaughlin Thanks for the feedback! 1aau.to/m/Shop-TRQ

@7thsignthenorthcoast146 Жыл бұрын

@@TRQ it’s the same video same time length

@rigobertohernandez2524 7 ай бұрын

I remove the other plate om bottom to unscrew the one bolt in bottom really hard to get was easier once I remove thw plate and i had to use a wrench couldn't get a ratchet in there due to one metap line

@josephbaechle953 Жыл бұрын

How many mounts is there? 2 or 4 total?

@ThaMurdaShow187 13 күн бұрын

This is for the people who thought you could jus wiggle it out of there like the Videos shows but you cant. This might help. Loosen the subframe bolts slightly on the passenger side then Loosen subframe bolts almost all the way on the driver side and it'll slip out. Don't edit out the struggle in the videos TRQ. it's very misleading

@greypoupon8510 22 күн бұрын

Ive been a customer and viewer for years.Ill never watch videos or buy parts from TRQ again after that cut in the video of taking it out and acting like it was so easy instead of showing us how u got it out.point blank period tells me your in it for the money not to help us out anymore.