Buy Now!
New Wheel Bearing from 1AAuto.com 1aau.to/ic/1ASHF00108
This video shows you how to install new front wheel bearings from TRQ on your 2003-2007 Honda Accord.
This process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obso/1AXAA00013
• 10mm Socket 1aau.to/obmi/1AXAA00017
• 17mm Socket 1aau.to/obGL/1AXAA00015
• 19mm Socket 1aau.to/oaoX/1AXAA00043
• 32mm Socket 1aau.to/odg/1AAST00003
• Brake Caliper Hanger 1aau.to/ojU/1AXAA00439
• Press
• Snap Ring Pliers
• Wire Cutters
• Ratchet 1aau.to/obJ5/1AXAA00016
• Ratcheting Bit Driver
• Socket Extensions 1aau.to/obGL/1AXAA00015
• Swivel
• Torque Wrench 1aau.to/oaPq/1AXAA00044
• Copper Anti-Seize
• Gloves 1aau.to/oaqP/1AXSS00048
• Rust Penetrant
• Safety Glasses
• sanding disc
• Sandpaper
• Center Punch 1aau.to/omr/1AXAA00055
• Floor Jack 1aau.to/oadz/1AXAA00068
• Hammer
• Jack Stands 1aau.to/oZ8/1AXAA00065
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.